| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Two small cleanups
- Another fix for addressing the EFI framebuffer above 4GB when running
as Xen dom0
- A patch to let Xen guests use reserved bits in MSI- and IO-APIC-
registers for extended APIC-IDs the same way KVM guests are doing it
already
* tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pci: Make use of the helper macro LIST_HEAD()
xen/x2apic: Fix inconsistent indenting
xen/x86: detect support for extended destination ID
xen/x86: obtain full video frame buffer address for Dom0 also under EFI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a corner case of fatal SIGSYS being ignored since v5.15.
Along with the signal fix is a change to seccomp so that seeing
another syscall after a fatal filter result will cause seccomp to kill
the process harder.
Summary:
- Force HANDLER_EXIT even for SIGNAL_UNKILLABLE
- Make seccomp self-destruct after fatal filter results
- Update seccomp samples for easier behavioral demonstration"
* tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples/seccomp: Adjust sample to also provide kill option
seccomp: Invalidate seccomp mode to catch death failures
signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE
|
|
Merge misc fixes from Andrew Morton:
"5 patches.
Subsystems affected by this patch series: binfmt, procfs, and mm
(vmscan, memcg, and kfence)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kfence: make test case compatible with run time set sample interval
mm: memcg: synchronize objcg lists with a dedicated spinlock
mm: vmscan: remove deadlock due to throttling failing to make progress
fs/proc: task_mmu.c: don't read mapcount for migration entry
fs/binfmt_elf: fix PT_LOAD p_align values for loaders
|
|
When the KCONFIG_AUTOCONFIG is specified (e.g. export \
KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of
include/config/ will not be created, so kconfig can't create deps
files in it and auto.conf can't be generated.
Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.
It causes build errors as reported by the kernel test robot.
Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured")
Cc: stable@kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parameter kfence_sample_interval can be set via boot parameter and
late shell command, which is convenient for automated tests and KFENCE
parameter optimization. However, KFENCE test case just uses
compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test
case not run as users desired. Export kfence_sample_interval, so that
KFENCE test case can use run-time-set sample interval.
Link: https://lkml.kernel.org/r/20220207034432.185532-1-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian Knig <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A soft lockup bug in kcompactd was reported in a private bugzilla with
the following visible in dmesg;
watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479]
watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479]
watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479]
watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479]
The machine had 256G of RAM with no swap and an earlier failed
allocation indicated that node 0 where kcompactd was run was potentially
unreclaimable;
Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB
inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB
mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp:
0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB
kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes
Vlastimil Babka investigated a crash dump and found that a task
migrating pages was trying to drain PCP lists;
PID: 52922 TASK: ffff969f820e5000 CPU: 19 COMMAND: "kworker/u128:3"
Call Trace:
__schedule
schedule
schedule_timeout
wait_for_completion
__flush_work
__drain_all_pages
__alloc_pages_slowpath.constprop.114
__alloc_pages
alloc_migration_target
migrate_pages
migrate_to_node
do_migrate_pages
cpuset_migrate_mm_workfn
process_one_work
worker_thread
kthread
ret_from_fork
This failure is specific to CONFIG_PREEMPT=n builds. The root of the
problem is that kcompact0 is not rescheduling on a CPU while a task that
has isolated a large number of the pages from the LRU is waiting on
kcompact0 to reschedule so the pages can be released. While
shrink_inactive_list() only loops once around too_many_isolated, reclaim
can continue without rescheduling if sc->skipped_deactivate == 1 which
could happen if there was no file LRU and the inactive anon list was not
low.
Link: https://lkml.kernel.org/r/20220203100326.GD3301@suse.de
Fixes: d818fca1cac3 ("mm/vmscan: throttle reclaim and compaction when too may pages are isolated")
Signed-off-by: Mel Gorman <mgorman@suse.de>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The syzbot reported the below BUG:
kernel BUG at include/linux/page-flags.h:785!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
Call Trace:
page_mapcount include/linux/mm.h:837 [inline]
smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
walk_pmd_range mm/pagewalk.c:128 [inline]
walk_pud_range mm/pagewalk.c:205 [inline]
walk_p4d_range mm/pagewalk.c:240 [inline]
walk_pgd_range mm/pagewalk.c:277 [inline]
__walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
walk_page_vma+0x277/0x350 mm/pagewalk.c:530
smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
smap_gather_stats fs/proc/task_mmu.c:741 [inline]
show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
seq_read+0x3e0/0x5b0 fs/seq_file.c:162
vfs_read+0x1b5/0x600 fs/read_write.c:479
ksys_read+0x12d/0x250 fs/read_write.c:619
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time. MADV_FREE may split THPs if it is called
for partial THP. It may trigger the below race:
CPU A CPU B
----- -----
smaps walk: MADV_FREE:
page_mapcount()
PageCompound()
split_huge_page()
page = compound_head(page)
PageDoubleMap(page)
When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.
This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.
Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount(). Don't skip getting mapcount
for device private entries since they do track references with mapcount.
Pagemap also has the similar issue although it was not reported. Fixed
it as well.
[shy828301@gmail.com: v4]
Link: https://lkml.kernel.org/r/20220203182641.824731-1-shy828301@gmail.com
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()]
Link: https://lkml.kernel.org/r/20220207171049.1102239-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20220120202805.3369-1-shy828301@gmail.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: syzbot+1f52b3a18d5633fa7f82@syzkaller.appspotmail.com
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rui Salvaterra reported that Aisleroit solitaire crashes with "Wrong
__data_start/_end pair" assertion from libgc after update to v5.17-rc1.
Bisection pointed to commit 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD
p_align values for static PIE") that fixed handling of static PIEs, but
made the condition that guards load_bias calculation to exclude loader
binaries.
Restoring the check for presence of interpreter fixes the problem.
Link: https://lkml.kernel.org/r/20220202121433.3697146-1-rppt@kernel.org
Fixes: 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If NIC had packets in tx queue at the moment link down event
happened, it could result in tx timeout when link got back up.
Since device has more than one tx queue we need to reset them
accordingly.
Fixes: 057f4af2b171 ("atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC")
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Link: https://lore.kernel.org/r/20220211065123.4187615-1-gatis@mikrotik.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We cannot do the cancel_work_sync from after the unregister_netdev, as
the dev pointer is no longer valid, causing a uaf on ldisc unregister
(or device close).
Instead, do the cancel_work_sync from the ndo_uninit op, where the dev
still exists, but the queue has stopped.
Fixes: 7bd9890f3d74 ("mctp: serial: cancel tx work on ldisc close")
Reported-by: Luo Likang <luolikang@nsfocus.com>
Tested-by: Luo Likang <luolikang@nsfocus.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20220211011552.1861886-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A kernel exception was hit when trying to dump /proc/lockdep_chains after
lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!":
Unable to handle kernel paging request at virtual address 00054005450e05c3
...
00054005450e05c3] address between user and kernel address ranges
...
pc : [0xffffffece769b3a8] string+0x50/0x10c
lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c
...
Call trace:
string+0x50/0x10c
vsnprintf+0x468/0x69c
seq_printf+0x8c/0xd8
print_name+0x64/0xf4
lc_show+0xb8/0x128
seq_read_iter+0x3cc/0x5fc
proc_reg_read_iter+0xdc/0x1d4
The cause of the problem is the function lock_chain_get_class() will
shift lock_classes index by 1, but the index don't need to be shifted
anymore since commit 01bb6f0af992 ("locking/lockdep: Change the range
of class_idx in held_lock struct") already change the index to start
from 0.
The lock_classes[-1] located at chain_hlocks array. When printing
lock_classes[-1] after the chain_hlocks entries are modified, the
exception happened.
The output of lockdep_chains are incorrect due to this problem too.
Fixes: f611e8cf98ec ("lockdep: Take read/write status in consideration when generate chainkey")
Signed-off-by: Cheng Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com
|
|
The reset input to the LAN9303 chip is active low, and devicetree
gpio handles reflect this. Therefore, the gpio should be requested
with an initial state of high in order for the reset signal to be
asserted. Other uses of the gpio already use the correct polarity.
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fianelil <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If backing file's filesystem has implemented ->fallocate(), we think the
loop device can support discard, then pass sb->s_blocksize as
discard_granularity. However, some underlying FS, such as overlayfs,
doesn't set sb->s_blocksize, and causes discard_granularity to be set as
zero, then the warning in __blkdev_issue_discard() is triggered.
Christoph suggested to pass kstatfs.f_bsize as discard granularity, and
this way is fine because kstatfs.f_bsize means 'Optimal transfer block
size', which still matches with definition of discard granularity.
So fix the issue by setting discard_granularity as kstatfs.f_bsize if it
is available, otherwise claims discard isn't supported.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220126035830.296465-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
qedi_process_cmd_cleanup_resp()
This fixes a deadlock added with commit b40f3894e39e ("scsi: qedi: Complete
TMF works before disconnect")
Bug description from Jia-Ju Bai:
qedi_process_tmf_resp()
spin_lock(&session->back_lock); --> Line 201 (Lock A)
spin_lock(&qedi_conn->tmf_work_lock); --> Line 230 (Lock B)
qedi_process_cmd_cleanup_resp()
spin_lock_bh(&qedi_conn->tmf_work_lock); --> Line 752 (Lock B)
spin_lock_bh(&conn->session->back_lock); --> Line 784 (Lock A)
When qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() are
concurrently executed, the deadlock can occur.
This patch fixes the deadlock by not holding the tmf_work_lock in
qedi_process_cmd_cleanup_resp while holding the back_lock. The
tmf_work_lock is only needed while we remove the tmf_work from the
work_list.
Link: https://lore.kernel.org/r/20220208185448.6206-1-michael.christie@oracle.com
Fixes: b40f3894e39e ("scsi: qedi: Complete TMF works before disconnect")
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bugfixes, most of which had been sent a
while ago but only now made it into the soc tree:
Maintainer file updates:
- Claudiu Beznea now co-maintains the at91 soc family, replacing
Ludovic Desroches.
- Michael Walle maintains the sl28cpld drivers
- Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
platforms
- Alim Akhtar is an additional reviewer for Samsung platforms
Code fixes:
- Op-tee had a problem with object lifetime that needs a slightly
complex fix, as well as another bug with error handling.
- Several minor issues for the OMAP platform, including a regression
with the timer
- A Kconfig change to fix a build-time issue on Intel SoCFPGA
Device tree fixes:
- The Amlogic Meson platform fixes a boot regression on am1-odroid, a
spurious interrupt, and a problem with reserved memory regions
- In the i.MX platform, several bug fixes are needed to make devices
work correctly: SD card detection, alarmtimer, and sound card on
some board. One patch for the GPU got in there by accident and gets
reverted again.
- TI K3 needs a fix for J721S2 serial port numbers
- ux500 needs a fix to mount the SD card as root on the Skomer phone"
* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
arm64: Remove ARCH_VULCAN
MAINTAINERS: add myself as a maintainer for the sl28cpld
MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
MAINTAINERS: arm: samsung: add Git tree and IRC
ARM: dts: Fix boot regression on Skomer
ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
docs/ABI: testing: aspeed-uart-routing: Escape asterisk
MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
MAINTAINERS: Update Benjamin Gaignard maintainer status
ARM: socfpga: fix missing RESET_CONTROLLER
arm64: dts: meson-sm1-odroid: fix boot loop after reboot
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
optee: use driver internal tee_context for some rpc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert a commit that reduced the number of IRQs used but resulted in
interrupt storms (Bjorn Helgaas)"
* tag 'pci-v5.17-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/portdrv: Do not setup up IRQs if there are no users"
|
|
Since we now return a pointer to an allocated object we need
to account for memory allocation failure in a separate
error path.
Fixes: 25fd330370ac ("power: supply_core: Pass pointer to battery info")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This reverts commit 0e8ae5a6ff5952253cd7cc0260df838ab4c21009.
0e8ae5a6ff59 ("PCI/portdrv: Do not setup up IRQs if there are no users")
reduced usage of IRQs when we don't think we need them. But Joey, Sergiu,
and David reported choppy GUI rendering, systems that became unresponsive
every few seconds, incorrect values reported by cpufreq, and high IRQ 16
CPU usage.
Joey bisected the issues to 0e8ae5a6ff59, so revert it until we figure out
a better solution.
Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546
Reported-by: Joey Corleone <joey.corleone@mail.ru>
Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com>
Reported-by: David Spencer <dspencer577@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Cc: Jan Kiszka <jan.kiszka@siemens.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid undefined behavior when stack backtracing, which
manifests in GCC as incorrect stack addresses
- A few fixes for the XIP kernels
- A fix to tracking NUMA state on CPU hotplug
- Support for the recently relesaed binutils-2.38, which changed the
default ISA version to one without CSRs or fence.i in 'I' extension
* tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build with binutils 2.38
riscv: cpu-hotplug: clear cpu from numa map when teardown
riscv: extable: fix err reg writing in dedicated uaccess handler
riscv/mm: Add XIP_FIXUP for riscv_pfn_base
riscv/mm: Add XIP_FIXUP for phys_ram_base
riscv: Fix XIP_FIXUP_FLASH_OFFSET
riscv: eliminate unreliable __builtin_frame_address(1)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Enable Cortex-A510 erratum 2051678 by default as we do with other
errata.
- arm64 IORT: Check the node revision for PMCG resources to cope with
old firmware based on a broken revision of the spec that had no way
to describe the second register page (when an implementation is using
the recommended RELOC_CTRS feature).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Check node revision for PMCG resources
arm64: Enable Cortex-A510 erratum 2051678 by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
issues related to wakeup from suspend-to-idle on x86.
Specifics:
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle to
systems based on Intel hardware, because it turned out that systems
based on hardware from other vendors depended on that functionality
too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle on
x86 (Rafael Wysocki)"
* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
PM: s2idle: ACPI: Fix wakeup interrupts handling
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Revert debug commit that causes unexpected data corruption
- Fix muti-block reservation regression
* tag 'gfs2-v5.16-rc3-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix gfs2_release for non-writers regression
Revert "gfs2: check context in gfs2_glock_put"
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- nvme-tcp: fix bogus request completion when failing to send AER
(Sagi Grimberg)
- add the missing nvme_complete_req tracepoint for batched
completion (Bean Huo)
- Revert of the loop async autoclear issue that has continued to plague
us this release. A few patchsets exists to improve this, but they are
too invasive to be considered at this point (Tetsuo)
* tag 'block-5.17-2022-02-11' of git://git.kernel.dk/linux-block:
loop: revert "make autoclear operation asynchronous"
nvme-tcp: fix bogus request completion when failing to send AER
nvme: add nvme_complete_req tracepoint for batched completion
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a false-positive warning from an older gcc (Alviro)
- Allow oom killer invocations from io_uring_setup (Shakeel)
* tag 'io_uring-5.17-2022-02-11' of git://git.kernel.dk/linux-block:
mm: io_uring: allow oom-killer from io_uring_setup
io_uring: Clean up a false-positive warning from GCC 9.3.0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use sleeping variants of GPIO accessors where needed
in gpio-aggregator
- never return kernel's internal error codes to user-space
in gpiolib core
- use the correct register for reading output values in
gpio-sifive
- fix line hogging in gpio-sim
* tag 'gpio-fixes-for-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix hogs with custom chip labels
gpio: sifive: use the correct register to read output values
gpiolib: Never return internal error codes to user space
gpio: aggregator: Fix calling into sleeping GPIO controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"A couple of additional fixes for 5.17-rc4:
- Fix compilation warnings in the sata_fsl driver (powerpc) (me)
- Disable TRIM commands on M88V29 devices as these commands are
failing despite the device reporting it supports TRIM (Zoltan)"
* tag 'ata-5.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: Disable TRIM on M88V29
ata: sata_fsl: fix sscanf() and sysfs_emit() format strings
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, mostly i915 and amd fixes, along with a
maintainers update for fbdev core.
Otherwise just some build fixes and vc4 HDMI fixes.
fbdev:
- MAINTAINERS: add Daniel as fbdev core module maintainer
- build warning fix
- implicit type cast fix
panel:
- simple: Fix assignments from panel_dpi_probe()
privacy-screen:
- fix docs warning
i915:
- non-x86 build fix
- ttm error propogation fix
- drrs on hsw/ivb disabled
- BIOS readout fixes
- missing stackdepot oops fix
amd:
- DCN 3.1 display fixes
- GC 10.3.1 harvest fix
- Page flip irq fix
- hwmon label fix
- DCN 2.0 display fix
rockchip:
- fix HDMI error cleanup
- fix RK3399 VOP register fields
vc4:
- HDMI fixes
- remove redundant code"
* tag 'drm-fixes-2022-02-11' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amdgpu/display: change pipe policy for DCN 2.0
drm/amd/pm: fix hwmon node of power1_label create issue
drm/amd/display: keep eDP Vdd on when eDP stream is already enabled
drm/amd/display: fix yellow carp wm clamping
drm/amd/display: Cap pflip irqs per max otg number
drm/amdgpu: add utcl2_harvest to gc 10.3.1
display/amd: decrease message verbosity about watermarks table failure
drm/rockchip: vop: Correct RK3399 VOP register fields
drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
MAINTAINERS: Add entry for fbdev core
fbcon: Avoid 'cap' set but not used warning
drm/privacy-screen: Fix sphinx warning
drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL
drm/i915: Populate pipe dbuf slices more accurately during readout
drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration
drm/i915: Fix header test for !CONFIG_X86
drm/i915/ttm: Return some errors instead of trying memcpy move
drm/i915: Disable DRRS on IVB/HSW port != A
drm/i915: Fix oops due to missing stack depot
drm/vc4: crtc: Fix redundant variable assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fixes to the RTLA tooling
- A fix to a tp_printk overriding tp_printk_stop_on_boot on the
command line
* tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
MAINTAINERS: Add RTLA entry
rtla: Fix segmentation fault when failing to enable -t
rtla/trace: Error message fixup
rtla/utils: Fix session duration parsing
rtla: Follow kernel version
|
|
Add device tree bindings for the i2c controller on
the Microchip PolarFire SoC.
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If svm_deliver_avic_intr is called just after the target vcpu's AVIC got
inhibited, it might read a stale value of vcpu->arch.apicv_active
which can lead to the target vCPU not noticing the interrupt.
To fix this use load-acquire/store-release so that, if the target vCPU
is IN_GUEST_MODE, we're guaranteed to see a previous disabling of the
AVIC. If AVIC has been disabled in the meanwhile, proceed with the
KVM_REQ_EVENT-based delivery.
Incomplete IPI vmexit has the same races as svm_deliver_avic_intr, and
in fact it can be handled in exactly the same way; the only difference
lies in who has set IRR, whether svm_deliver_interrupt or the processor.
Therefore, svm_complete_interrupt_delivery can be used to fix incomplete
IPI vmexits as well.
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SVM has to set IRR for both the AVIC and the software-LAPIC case,
so pull it up to the common function that handles both configurations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The check on the current CPU adds an extra level of indentation to
svm_deliver_avic_intr and conflates documentation on what happens
if the vCPU exits (of interest to svm_deliver_avic_intr) and migrates
(only of interest to avic_ring_doorbell, which calls get/put_cpu()).
Extract the wrmsr to a separate function and rewrite the
comment in svm_deliver_avic_intr().
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no vmx_pi_mmio_test file. Remove it to get rid of error while
creation of selftest archive:
rsync: [sender] link_stat "/kselftest/kvm/x86_64/vmx_pi_mmio_test" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 6a58150859fd ("selftest: KVM: Add intra host migration tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20220210172352.1317554-1-usama.anjum@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a minor chance for a race, if a pointer to an i2c-bus subnode
is stored and then reused after releasing its reference, and it would
be sufficient to get one more reference under a loop over children
subnodes.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If i2c_add_adapter() fails to add an I2C adapter found on QCOM CCI
controller, on error path i2c_del_adapter() is still called.
Fortunately there is a sanity check in the I2C core, so the only
visible implication is a printed debug level message:
i2c-core: attempting to delete unregistered adapter [Qualcomm-CCI]
Nevertheless it would be reasonable to correct the probe error path.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add support for the I2C Bus Interface on R-Car Gen4 SoCs (e.g. R-Car
S4-8) by matching on a family-specific compatible value.
While I2C on R-Car Gen4 does support some extra features (Slave Clock
Stretch Select), for now it is treated the same as I2C on R-Car Gen3.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: removed incorrect "FM+" from commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Document support for the I2C Bus Interfaces in the Renesas R-Car S4-8
(R8A779F0) SoC, including a new family-specific compatible value for the
R-Car Gen4 family.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
non-regular file needs to be compiled and then copied to the output
directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This
removes error thrown by rsync when non-regular object isn't found:
rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 0f71241a8e32 ("selftests/exec: add file type errno tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
drm_gem_cma_mmap() cannot assume every implementation of dma_mmap_wc()
will end up calling remap_pfn_range() (which happens to set the relevant
vma flag, among others), so in order to make sure expectations around
VM_DONTEXPAND are met, let it explicitly set the flag like most other
GEM mmap implementations do.
This avoids repeated warnings on a small minority of systems where the
display is behind an IOMMU, and has a simple driver which does not
override drm_gem_cma_default_funcs. Arm hdlcd is an in-tree affected
driver. Out-of-tree, the Apple DCP driver is affected; this fix is
required for DCP to be mainlined.
[Alyssa: Update commit message.]
Fixes: c40069cb7bd6 ("drm: add mmap() to drm_gem_object_funcs")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013143654.39031-1-alyssa@rosenzweig.io
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #3
- Fix pending state read of a HW interrupt
|
|
Zone append command needs special handling to update the bi_sector
field in the bio struct with the actual position of the data in the
device. It is stored in __sector field of the request struct.
Fixes: 5581a5ddfe8d ("block: add completion handler for fast path")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220211093425.43262-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."
Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE. Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:
kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.
This patch moves the check back inside the check for FMODE_WRITE.
Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
It turns out that the might_sleep() call that commit 660a6126f8c3 adds
is triggering occasional data corruption in testing. We're not sure
about the root cause yet, but since this commit was added as a debugging
aid only, revert it for now.
This reverts commit 660a6126f8c3208f6df8d552039cda078a8426d1.
Fixes: 660a6126f8c3 ("gfs2: check context in gfs2_glock_put")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Merge a revert of a problematic commit for 5.17-rc4.
* acpi-x86:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.17-rc4
Here are some new device ids for 5.17-rc4.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: add CPI Bulk Coin Recycler id
USB: serial: cp210x: add NCR Retail IO box id
USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
USB: serial: option: add ZTE MF286D modem
USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
|
|
Implement an I2C controller sharing mechanism between the host (kernel)
and PSP co-processor on some platforms equipped with AMD Cezanne SoC.
On these platforms we need to implement "software" i2c arbitration.
Default arbitration owner is PSP and kernel asks for acquire as well
as inform about release of the i2c bus via mailbox mechanism.
+---------+
<- ACQUIRE | |
+---------| CPU |\
| | | \ +----------+ SDA
| +---------+ \ | |-------
MAILBOX +--> | I2C-DW | SCL
| +---------+ | |-------
| | | +----------+
+---------| PSP |
<- ACK | |
+---------+
+---------+
<- RELEASE | |
+---------| CPU |
| | | +----------+ SDA
| +---------+ | |-------
MAILBOX +--> | I2C-DW | SCL
| +---------+ / | |-------
| | | / +----------+
+---------| PSP |/
<- ACK | |
+---------+
The solution is similar to i2c-designware-baytrail.c implementation, where
we are using a generic i2c-designware-* driver with a small "wrapper".
In contrary to baytrail semaphore implementation, beside internal
acquire_lock() and release_lock() methods we are also applying quirks to
lock_bus() and unlock_bus() global adapter methods. With this in place
all i2c clients drivers may lock i2c bus for a desired number of i2c
transactions (e.g. write-wait-read) without being aware of that such bus
is shared with another entity.
Modify i2c_dw_probe_lock_support() to select correct semaphore
implementation at runtime, since now we have more than one available.
Configure new matching ACPI ID "AMDI0019" and register
ARBITRATION_SEMAPHORE flag in order to distinguish setup with PSP
arbitration.
Add myself as a reviewer for I2C DesignWare in order to help with reviewing
and testing possible changes touching new i2c-designware-amdpsp.c module.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
[wsa: removed unneeded blank line and curly braces]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
All accesses to controller's registers should be protected on
probe, disable and xfer paths. This is needed for i2c bus controllers
that are shared with but not controller by kernel.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
