summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-19vmwgfx: Resend the cursor after legacy modesetJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Do better culling of presentsJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Refactor kms code to use vmw_user_lookup_handle helperJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Add helper function to get surface or dmabufJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Refactor cursor updateJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Remove dmabuf check in present ioctlJakob Bornecrantz
Doesn't protect any error code and only gets in the way of debugging. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Use the revised fifo hw version register when presentThomas Hellstrom
The driver implements the needed resource management required to use that register. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19usb: gadget: epautoconf: do not change number of streamsFelipe Balbi
We should not change gadget driver's descriptors just because we think it's right to do so. There are several of reasons which would support this statement but it suffices to say that this was probably never tested because it updates bmAttributes without asking the driver if it's ok to do so. This means that e.g. on UASP gadget it would enable stream support even for the command endpoint which must not have stream support enabled. In fact, this change is fixing the bug introduced by commit a59d6b9 (usb: gadget: add streams support to the gadget framework) which was caught when testing UASP gadget with dwc3 driver. Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19enable uncompress log on cpuimx35sdEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19cpuimx35: fix touchscreen supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19cpuimx35sd: fix KconfigEric Bénard
in 0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c I fixed the mach-types records. We also need to make the name consistent in Kconfig else the machine_is_eukrea_cpuimx35sd macro fails, and thus audio codec is not properly initalized. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19clock-imx35: fix reboot in internal boot modeEric Bénard
commit 8d75a26 "ARM: mx35: use generic function for displaying silicon revision" disabled IIM clock after reading silicon revision which will prevent reboot in internal boot mode. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Jason Liu <jason.hui@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19dma: MX3_IPU fix dependsEric Bénard
ARCH_MX3 was removed in commit a89cf59 : "arm/imx: merge i.MX3 and i.MX6" thus preventing to select MX3_IPU, thus preventing IPU and display to work on i.MX3x SOC. i.MX SDMA support is also affected. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19imx_v4_v5_defconfig: update default configurationEric Bénard
- add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19cpuimx25sd: fix KconfigEric Bénard
in 0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c I fixed the mach-types records. We also need to make the name consistent in Kconfig else the machine_is_eukrea_cpuimx25sd macro fails, and thus audio codec is not properly initalized. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19arm/imx: fix cpufreq section mismatchRichard Zhao
WARNING: arch/arm/plat-mxc/built-in.o(.data+0x488): Section mismatch in reference from the variable mxc_driver to the function .init.text:mxc_cpufreq_init() The variable mxc_driver references the function __init mxc_cpufreq_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-19ARM:imx:fix pwm period valueJason Chen
According to imx pwm RM, the real period value should be PERIOD value in PWMPR plus 2. PWMO (Hz) = PCLK(Hz) / (period +2) Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@kernel.org
2011-12-19mtd: plat_ram: call mtd_device_register only if partition data existsIlya Yanok
mtd_device_parse_register() registers the device as a whole if no partition data is passed so there is no reason to call mtd_device_register() after that. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-12-19time/clocksource: Fix kernel-doc warningsKusanagi Kouichi
Fix various KernelDoc build warnings. Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp> Cc: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20111219091320.0D5AF6FC03D@msa105.auone-net.jp Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-19ALSA: atmel/ac97c: using software reset instead hardware reset if not availableBo Shen
Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-12-18Revert "Bluetooth: Revert: Fix L2CAP connection establishment"Gustavo F. Padovan
This reverts commit 4dff523a913197e3314c7b0d08734ab037709093. It was reported that this patch cause issues when trying to connect to legacy devices so reverting it. Reported-by: David Fries <david@fries.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Clear RFCOMM session timer when disconnecting last channelMat Martineau
When the last RFCOMM data channel is closed, a timer is normally set up to disconnect the control channel at a later time. If the control channel disconnect command is sent with the timer pending, the timer needs to be cancelled. If the timer is not cancelled in this situation, the reference counting logic for the RFCOMM session does not work correctly when the remote device closes the L2CAP connection. The session is freed at the wrong time, leading to a kernel panic. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Prevent uninitialized data access in L2CAP configurationMat Martineau
When configuring an ERTM or streaming mode connection, remote devices are expected to send an RFC option in a successful config response. A misbehaving remote device might not send an RFC option, and the L2CAP code should not access uninitialized data in this case. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18ARM: 7220/1: mmc: mmci: Fixup error handling for dmaUlf Hansson
When getting a cmd irq during an ongoing data transfer with dma, the dma job were never terminated. This is now corrected. Cc: <stable@vger.kernel.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERRUlf Hansson
The interrupt was previously enabled and then correctly cleared. Now we also handle it correctly. Cc: <stable@vger.kernel.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (22 commits) [SCSI] fcoe: fix fcoe in a DCB environment by adding DCB notifiers to set skb priority [SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request deref [SCSI] qla4xxx: check for failed conn setup [SCSI] qla4xxx: a small loop fix [SCSI] qla4xxx: fix flash/ddb support [SCSI] zfcp: return early from slave_destroy if slave_alloc returned early [SCSI] fcoe: Fix preempt count leak in fcoe_filter_frames() [SCSI] qla2xxx: Update version number to 8.03.07.12-k. [SCSI] qla2xxx: Submit all chained IOCBs for passthrough commands on request queue 0. [SCSI] qla2xxx: Correct fc_host port_state display. [SCSI] qla2xxx: Disable generating pause frames when firmware hang detected for ISP82xx. [SCSI] qla2xxx: Clear mailbox busy flag during premature mailbox completion for ISP82xx. [SCSI] qla2xxx: Encapsulate prematurely completing mailbox commands during ISP82xx firmware hang. [SCSI] qla2xxx: Display IPE error message for ISP82xx. [SCSI] qla2xxx: Return the correct value for a mailbox command if 82xx is in reset recovery. [SCSI] qla2xxx: Enable Minidump by default with default capture mask 0x1f. [SCSI] qla2xxx: Stop unconditional completion of mailbox commands issued in interrupt mode during firmware hang. [SCSI] qla2xxx: Revert back the request queue mapping to request queue 0. [SCSI] qla2xxx: Don't call alloc_fw_dump for ISP82XX. [SCSI] qla2xxx: Check for SCSI status on underruns. ...
2011-12-18Merge branch 'for-linus/i2c-32-rc6' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c-32-rc6' of git://git.fluff.org/bjdooks/linux: i2c-eg20t: correct the driver init order of pch_i2c_probe() I2C: OMAP: fix FIFO usage for OMAP4 i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle
2011-12-18pci: Fix hotplug of Express Module with pci bridgesYinghai Lu
I noticed that hotplug of one setup does not work with recent change in pci tree. After checking the bridge conf setup, I noticed that the bridges get assigned but do not get enabled. The reason is the following commit, while simply ignores bridge resources when enabling a pci device: | commit bbef98ab0f019f1b0c25c1acdf1683c68933d41b | Author: Ram Pai <linuxram@us.ibm.com> | Date: Sun Nov 6 10:33:10 2011 +0800 | | PCI: defer enablement of SRIOV BARS |... | NOTE: Note, there is subtle change in the pci_enable_device() API. Any | driver that depends on SRIOV BARS to be enabled in pci_enable_device() | can fail. Put back bridge resource and ROM resource checking to fix the problem. That should fix regression like BIOS does not assign correct resource to bridge. Discussion can be found at: http://www.spinics.net/lists/linux-pci/msg12874.html Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-18kconfig: adapt update-po-config to new UML layoutPaul Bolle
Commit 5c48b108 ("um: take arch/um/sys-x86 to arch/x86/um") broke the make target update-po-config, as its symlink trick (again) fails. (Previous breakage was fixed with commit bdc69ca4 ("kconfig: change update-po-config to reflect new layout of arch/um").) The new UML layout allows to drop the symlick trick entirely. And if, one day, another architecture supports UML too, that should now work without again breaking this make target. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-12-18i2c-eg20t: correct the driver init order of pch_i2c_probe()Feng Tang
Before registering an adapter to i2c subsystem, we need make sure driver is ready for incoming i2c xfer, becasue the i2c_add_adapter() may trigger a i2c device driver's proble function which may start some real i2c xfer. I met this issue when integrating a TSC2007 i2c touch screen device with the i2c-eg20t driver. This patch will call request_irq() and hw init before calling i2c_add_adapter(). Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-12-18I2C: OMAP: fix FIFO usage for OMAP4Shubhrajyoti D
Currently the fifo depth is set to zero for OMAP4 which disables the FIFO usage. This patch enables the FIFO usage for I2C transactions on OMAP4 also. Tested on omap4430 and 3430. Tested-and-Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-12-18i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpioTushar Behera
s3c24xx_i2c_parse_dt_gpio is called when cfg_gpio is not defined in the platform data of the i2c device. When DT is not enabled, the above function always returns -EINVAL. Since there can be some i2c devices which don't need to configure any gpio lines, the probe of such devices would fail here. Changing the default return value to success would fix this issue. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-12-18i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idleMark Brown
Be a bit more friendly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-12-18writeback: show writeback reason with __print_symbolicWu Fengguang
This makes the binary trace understandable by trace-cmd. CC: Dave Chinner <david@fromorbit.com> CC: Curt Wohlgemuth <curtw@google.com> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-17Merge branches 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf events: Fix ring_buffer_wakeup() brown paperbag bug * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling MAINTAINERS: Update tip.git related git trees
2011-12-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Set device power state to PCI_D0 for device without native PM support PCI hotplug: Always allow acpiphp to handle non-PCIe bridges PCI: fix ats compile failure PCI: defer enablement of SRIOV BARS
2011-12-16Linux 3.2-rc6v3.2-rc6Linus Torvalds
2011-12-16Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"Linus Torvalds
This reverts commit eb1711bb94991e93669c5a1b5f84f11be2d51ea1. It blows up the i915 seqno tracking, resulting in the BUG_ON(seqno == 0); in i915_wait_request() triggering, which will cause lock-ups. See for example https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903010 https://lkml.org/lkml/2011/12/14/395 Reported-requested-and-tested-by: Dirk Hohndel <dirk@hohndel.org> Reported-by: Richard Eames <Richard.Eames@flinders.edu.au> Reported-by: Rocko Requin <rockorequin@hotmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Keith Packard <keithp@keithp.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: Be less strict in matching %lo part of relocation. sbus: convert drivers/sbus/char/* to use module_platform_driver() bbc_i2c: Remove unneeded err variable sparc: Use kmemdup rather than duplicating its implementation
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow(). sch_gred: should not use GFP_KERNEL while holding a spinlock ipip, sit: copy parms.name after register_netdevice ipv6: Fix for adding multicast route for loopback device automatically. ssb: fix init regression with SoCs rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition mac80211: fix another race in aggregation start fsl_pq_mdio: Clean up tbi address configuration ppp: fix pptp double release_sock in pptp_bind() net/fec: fix the use of pdev->id ath9k: fix check for antenna diversity support batman-adv: delete global entry in case of roaming batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM Bluetooth: Correct version check in hci_setup btusb: fix a memory leak in btusb_send_frame() Bluetooth: bnep: Fix module reference Bluetooth: cmtp: Fix module reference Bluetooth: btmrvl: support Marvell Bluetooth device SD8797
2011-12-16Merge branches 'for-linus' and 'for-linus-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: unplug every once and a while Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code Btrfs: only set cache_generation if we setup the block group Btrfs: don't panic if orphan item already exists Btrfs: fix leaked space in truncate Btrfs: fix how we do delalloc reservations and how we free reservations on error Btrfs: deal with enospc from dirtying inodes properly Btrfs: fix num_workers_starting bug and other bugs in async thread BTRFS: Establish i_ops before calling d_instantiate Btrfs: add a cond_resched() into the worker loop Btrfs: fix ctime update of on-disk inode btrfs: keep orphans for subvolume deletion Btrfs: fix inaccurate available space on raid0 profile Btrfs: fix wrong disk space information of the files Btrfs: fix wrong i_size when truncating a file to a larger size Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror * 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: lower the dirty balance poll interval
2011-12-16Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linuxLinus Torvalds
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915/dp: Dither down to 6bpc if it makes the mode fit drm/i915: enable semaphores on per-device defaults drm/i915: don't set unpin_work if vblank_get fails drm/i915: By default, enable RC6 on IVB and SNB when reasonable iommu: Export intel_iommu_enabled to signal when iommu is in use drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check drm/i915: prevent division by zero when asking for chipset power drm/i915: add PCH info to i915_capabilities drm/i915: set the right SDVO transcoder for CPT drm/i915: no-lvds quirk for ASUS AT5NM10T-I drm/i915: Treat pre-gen4 backlight duty cycle value consistently drm/i915: Hook up Ivybridge eDP drm/i915: add multi-threaded forcewake support
2011-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails ASoC: WM8958: correctly show firmware magic on mismatch ASoC: mxs: Add appropriate MODULE_ALIAS() ASoC: mxs: Add missing MODULE_LICENSE("GPL") ASoC: Fix WM8996 24.576MHz clock operation ASoC: Include linux/module.h for smdk2443_wm9710 ASoC: Fix a typo in jive_wm8750 ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC ASoC: Include linux/io.h for jz4740 codec
2011-12-16Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: Fix DA9052 GPIO build errors. gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121 gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip gpio-ml-ioh: fix a bug in the interrupt handler gpio: pl061: drop extra check for NULL platform_data
2011-12-16Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: rx51: fix USB ARM: OMAP: mcbsp: Fix possible memory corruption arm/imx: fix power button on imx51 babbage board ARM: imx: fix cpufreq build errors ARM: mx5: add __initconst for fec pdata MXC PWM: should active during DOZE/WAIT/DBG mode ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 ARM: SAMSUNG: remove duplicated header include
2011-12-16Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-block: block: don't kick empty queue in blk_drain_queue() block/swim3: Locking fixes loop: Fix discard_alignment default setting cfq-iosched: fix cfq_cic_link() race confition cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails cciss: fix flush cache transfer length cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler loop: fix loop block driver discard and encryption comment block: initialize request_queue's numa node during
2011-12-16btrfs: lower the dirty balance poll intervalWu Fengguang
Tests show that the original large intervals can easily make the dirty limit exceeded on 100 concurrent dd's. So adapt to as large as the next check point selected by the dirty throttling algorithm. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-16drm/i915/dp: Dither down to 6bpc if it makes the mode fitAdam Jackson
Some active adaptors (VGA usually) only have two lanes at 2.7GHz. That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc. Fixes Asus UX31 panel being black at startup due to no valid modes since dc22ee6fc18ce0f15424e753e8473c306ece95c1. v2: Rebased to current code, resulting in the fix applying to EDP panels as well. Also changed from spatio-temporal to just spatial dithering on pre-ironlake, to be conssitent (and less visual flicker) Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eric Anholt <eric@anholt.net> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-16drm/i915: enable semaphores on per-device defaultsEugeni Dodonov
This adds a default setting for semaphores parameter, and enables semaphores by default on IVB. For now, as semaphores interaction with VTd causes random issues on SNB, we do not enable them by default. But they can still be enabled via the semaphores=1 kernel parameter. v2: enables semaphores on SNB when IO remapping is disabled, with base on Keith Packard patch. CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: Ben Widawsky <ben@bwidawsk.net> CC: Keith Packard <keithp@keithp.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 14:47:23 +0000