summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-14ath9k: remove sc->config.cabqReadyTimeFelix Fietkau
It is not exposed as a configuration option anyway Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: move channel change code to ath_set_channelFelix Fietkau
Preparation for adding the scanning state machine to ath9k Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_cmn_update_ichannel staticFelix Fietkau
Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: simplify channel flagsFelix Fietkau
There was some duplication between channelFlags and chanmode, as well as a lot of redundant checks based on the combinations of flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove IS_CHAN_OFDM()Felix Fietkau
The hardware is always configured with OFDM support enabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove IS_CHAN_B()Felix Fietkau
Hardware 802.11b-only mode isn't supported by the driver (the device is configured for 802.11n/g instead). Simplify the code by removing checks for it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k_hw: remove direct accesses to channel mode flagsFelix Fietkau
Use wrappers where available. Simplifies code and helps with further improvements to the channel data structure Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: use a separate data structure for rx buffersFelix Fietkau
There's no shared code for handling both rx and tx buffers, and tx buffers require a lot more metadata than rx buffers. Using a separate data structure for rx reduces memory usage and improves cache footprint. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14wcn36xx: fix coccinelle warningsFengguang Wu
drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 106 /c/kernel-tests/src/i386/drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 148 This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Generated by: coccinelle/api/simple_open.cocci CC: Eugene Krasnikov <k.eugene.e@gmail.com> CC: John W. Linville <linville@tuxdriver.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt73usb: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt61pci: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt2800lib: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: rt2x00lib: use rt2x00_has_cap_* helpersGabor Juhos
Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: add rt2x00_has_cap_* helpersGabor Juhos
The rt2x00 code directly accesses the 'cap_flags' field of 'struct rt2x00_dev' when checking presence of a given capability flag. The direct access needs long expressions which lowers readability of the code. Add a few helper functions which can be used to test device capabilities without directly accessing the cap_flags filed. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14rt2x00: cleanup indentation in rt2800.hGabor Juhos
Adjust whitespaces to move badly aligned constants to the right column. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14Bluetooth: Fix updating advertising data needlesslyJohan Hedberg
We need to ensure that the advertising data is up-to-date whenever advertising is enabled, but when disabling advertising we do not need to worry about it (since it will eventually get fixed as soon as advertising is enabled again). This patch fixes this in the command complete callback for set_adv_enable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Move static advertising functions to avoid forward declarationsJohan Hedberg
These functions will soon be used by set_connectable() so move them to a location in mgmt.c that doesn't require forward declarations. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Add missing error handling for Set ConnectableJohan Hedberg
If the HCI commands related to the Set Connectable command fail we will get a non-zero status in the request completion callback. In such a case we must respond with the appropriate command status message to user space. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Move more logic into set_connectable complete callbackJohan Hedberg
This patch moves the responsibility of setting/clearing the HCI_CONNECTABLE flag to the request completion callback of the Set Connectable command. This will allow us to cleanly add support for LE Advertising hooks in later patches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Reorganize set_connectable HCI command sendingJohan Hedberg
This patch moves all the decisions of which HCI commands to send (or not to send) to the code between hci_req_init() and hci_req_run() this allows us to further extend the request with further commands but still keep the same logic of handling whether to return a direct mgmt response in the case that no HCI commands were sent. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Introduce L2CAP channel callback for resumingMarcel Holtmann
Clearing the BT_SK_SUSPEND socket flag from the L2CAP core is causing a dependency on the socket. So intead of doing that, use a channel callback into the socket handling to resume. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14Bluetooth: Introduce L2CAP channel flag for defer setupMarcel Holtmann
The L2CAP core should not look into the socket flags to figure out the setting of defer setup. So introduce a L2CAP channel flag that mirrors the socket flag. Since the defer setup option is only set in one place this becomes a really easy thing to do. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14Bluetooth: Adjust header for proc socket informationMarcel Holtmann
The exposed socket information do not contain source or destination addresses. So adjust the header accordingly. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Increase minor version of core moduleMarcel Holtmann
There have been a lot of changes in the core Bluetooth handling lately. So it is a good idea to increase the module version. The module version is not used anywhere, but it makes debugging a little bit simpler if versions can be distinguished. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Provide msg_name callback for L2CAP connectionless channelsMarcel Holtmann
The L2CAP connectionless channels use SOCK_DGRAM and recvmsg() and need to receive the remote BD_ADDR and PSM information via msg_name from the recvmsg() system call. So in case the L2CAP socket is for connectionless channels, provide a msg_name callback that can update the data. Also store the remote BD_ADDR and PSM in the skb so it can be extracted later on. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Add support for per socket msg_name callbackMarcel Holtmann
This allows to add a per socket msg_name callback that can be used for updating the msg_name information for recvmsg() system calls. This feature is used by another patch to support address information on L2CAP connectionless channels. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use l2cap_pi(sk) directly where possibleMarcel Holtmann
There are few places where it makes sense to use l2cap_pi(sk) directly instead of assigning it to temporary structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove src and dst fields from bt_sock structureMarcel Holtmann
Every socket protocol now stores its own address information. So just remove the generic src and dst fields since they are no longer needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store RFCOMM address information in its own socket structureMarcel Holtmann
The address information of RFCOMM sockets should be stored in its own socket structure. Trying to generalize them is not helpful since different transports have different address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store SCO address information in its own socket structureMarcel Holtmann
The address information of SCO sockets should be stored in its own socket structure. Trying to generalize them is not helpful since different transports have different address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use SCO addresses from HCI connection directlyMarcel Holtmann
Instead of storing a pointer to the addresses for the HCI device and HCI connection, use them directly. With the recent changes to address tracking of HCI connections, this becomes simple. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access BNEP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access HIDP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access CMTP session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Access RFCOMM session addresses through L2CAP channelMarcel Holtmann
The L2CAP socket structure does not contain the address information anymore. They need to be accessed through the L2CAP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Return the correct address type for L2CAP socketsMarcel Holtmann
The L2CAP sockets can use BR/EDR public, LE public and LE random addresses for various combinations of source and destination devices. So make sure that getsockname(), getpeername() and accept() return the correct address type. For this the address type of the source and destination is stored with the L2CAP channel information. The stored address type is not the one specific for the HCI protocol. It is the address type used for the L2CAP sockets and the management interface. The underlying HCI connections store the HCI address type. If needed, it gets converted to the socket address type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store address information in L2CAP channel structureMarcel Holtmann
With the effort of abstracting the L2CAP socket from the underlying L2CAP channel it is important to store the source and destination address information directly in the L2CAP channel structure. Direct access to the HCI connection address information is not possible since they might not be avaiable at L2CAP channel creation time. The address information will be updated when the underlying BR/EDR or LE connection status changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Update L2CAP socket source address from HCI connectionMarcel Holtmann
When having LE connections, the source address is not always the public address of the controller. So update the socket address based on the actual used source address of the HCI connection. This also remove the pointless source address pointer and adds a proper lock around the socket structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Fix coding style violations in SMP handlingMarcel Holtmann
The SMP source code has a few coding style violations. Fix them up all at once. No actual code has changed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Fix input address type for SMP C1 functionMarcel Holtmann
The smp_c1() so far always assumed public addresses as input for its operation. However it should provide actually the source address type of the actual connection. Finally the source address type is tracked in hci_conn->src_type and so use that one as input. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use hci_conn->src address for L2CAP functionsMarcel Holtmann
The source address is now stored in hci_conn->src and so use that one for L2CAP functions. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use hci_conn->src address for SMP functionsMarcel Holtmann
The source address is now stored in hci_conn->src and so use that one for SMP functions. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Update source address and type for incoming LE connectionsMarcel Holtmann
The incoming LE connections do not have a proper source address and address type set. The connection needs to be set with the same values as used for advertising parameters. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store source address of HCI connectionsMarcel Holtmann
The source addressed was based on the public address of the HCI device, but with LE connections this not always the case. For example single mode LE-only controllers would use a static random address. And this address is configured by userspace. To not complicate the lookup of what kind of address is in use, store the correct source address for each HCI connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store the source address type of LE connectionsMarcel Holtmann
When establishing LE connections, it is possible to use a public address (if available) or a random address. The type of address is only known when creating connections, so make sure it is stored in hci_conn structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove pointless bdaddr_to_le() helper functionMarcel Holtmann
The bdaddr_to_le() function tries to convert the internal address type to one that matches the HCI address type for LE. It does not handle any address types not used by LE and in the end just make the code a lot harder to read. So instead of just hiding behind a magic function, just convert the internal address type where it needs to be converted. And it turns out that these are only two cases anyway. One when creating new LE connections and the other when loading the long term keys. In both cases this makes it more clear on what it going on. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove l2cap_conn->src and l2cap_conn->dst pointersMarcel Holtmann
The l2cap_conn->src and l2cap_conn->dst pointers are no longer in use and so just remove them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove l2cap_conn->src and l2cap_conn->dst usage from L2CAPMarcel Holtmann
The l2cap_conn->src and l2cap_conn->dst addresses are just a pointers to hci_conn structure. Use hci_conn->hdev->bdaddr and hci_conn->dst directly instead. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove l2cap_conn->src and l2cap_conn->dst usage from SMPMarcel Holtmann
The l2cap_conn->src and l2cap_conn->dst addresses are just a pointer to hci_conn->hdev->bdaddr and hci_conn->dst structures. Use the data provided by hci_conn directly. This is done for hci_conn->dst_type already anyway and with this change it makes it a lot clearer were the address information comes from. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Remove l2cap_conn->dst usage from AMP managerMarcel Holtmann
The l2cap_conn->dst address is just a pointer into the hci_conn->dst structure. Use hci_conn->dst directly instead. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 03:00:33 +0000