summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-11iommu: Handle race with default domain setupRobin Murphy
It turns out that deferred default domain creation leaves a subtle race window during iommu_device_register() wherein a client driver may asynchronously probe in parallel and get as far as performing DMA API operations with dma-direct, only to be switched to iommu-dma underfoot once the default domain attachment finally happens, with obviously disastrous consequences. Even the wonky of_iommu_configure() path is at risk, since iommu_fwspec_init() will no longer defer client probe as the instance ops are (necessarily) already registered, and the "replay" iommu_probe_device() call can see dev->iommu_group already set and so think there's nothing to do either. Fortunately we already have the right tool in the right place in the form of iommu_device_use_default_domain(), which just needs to ensure that said default domain is actually ready to *be* used. Deferring the client probe shouldn't have too much impact, given that this only happens while the IOMMU driver is probing, and thus due to kick the deferred probe list again once it finishes. Reported-by: Charan Teja Kalla <quic_charante@quicinc.com> Fixes: 98ac73f99bc4 ("iommu: Require a default_domain for all iommu drivers") Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/e88b94c9b575034a2c98a48b3d383654cbda7902.1740753261.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-03-11iommu: Unexport iommu_fwspec_free()Robin Murphy
The drivers doing their own fwspec parsing have no need to call iommu_fwspec_free() since fwspecs were moved into dev_iommu, as returning an error from .probe_device will tear down the whole lot anyway. Move it into the private interface now that it only serves for of_iommu to clean up in an error case. I have no idea what mtk_v1 was doing in effectively guaranteeing a NULL fwspec would be dereferenced if no "iommus" DT property was found, so add a check for that to at least make the code look sane. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/36e245489361de2d13db22a510fa5c79e7126278.1740667667.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-03-10iommu/dma: Remove redundant lockingRobin Murphy
This reverts commit ac9a5d522bb80be50ea84965699e1c8257d745ce. iommu_dma_init_domain() is now only called under the group mutex, as it should be given that that the default domain belongs to the group, so the additional internal locking is no longer needed. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/a943d4c198e6a1fffe998337d577dc3aa7f660a9.1740585469.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-02-28Merge tag 'for-joerg' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd into core iommu shared branch with iommufd The three dependent series on a shared branch: - Change the iommufd fault handle into an always present hwpt handle in the domain - Give iommufd its own SW_MSI implementation along with some IRQ layer rework - Improvements to the handle attach API
2025-02-28iommu: Swap the order of setting group->pasid_array and calling attach op of ↵Yi Liu
iommu drivers The current implementation stores entry to the group->pasid_array before the underlying iommu driver has successfully set the new domain. This can lead to issues where PRIs are received on the new domain before the attach operation is completed. This patch swaps the order of operations to ensure that the domain is set in the underlying iommu driver before updating the group->pasid_array. Link: https://patch.msgid.link/r/20250226011849.5102-5-yi.l.liu@intel.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-28iommu: Store either domain or handle in group->pasid_arrayYi Liu
iommu_attach_device_pasid() only stores handle to group->pasid_array when there is a valid handle input. However, it makes the iommu_attach_device_pasid() unable to detect if the pasid has been attached or not previously. To be complete, let the iommu_attach_device_pasid() store the domain to group->pasid_array if no valid handle. The other users of the group->pasid_array should be updated to be consistent. e.g. the iommu_attach_group_handle() and iommu_replace_group_handle(). Link: https://patch.msgid.link/r/20250226011849.5102-4-yi.l.liu@intel.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-28iommu: Drop iommu_group_replace_domain()Yi Liu
iommufd does not use it now, so drop it. Link: https://patch.msgid.link/r/20250226011849.5102-3-yi.l.liu@intel.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-28iommu: Make @handle mandatory in iommu_{attach|replace}_group_handle()Yi Liu
Caller of the two APIs always provide a valid handle, make @handle as mandatory parameter. Take this chance incoporate the handle->domain set under the protection of group->mutex in iommu_attach_group_handle(). Link: https://patch.msgid.link/r/20250226011849.5102-2-yi.l.liu@intel.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-27iommufd: Implement sw_msi support nativelyJason Gunthorpe
iommufd has a model where the iommu_domain can be changed while the VFIO device is attached. In this case, the MSI should continue to work. This corner case has not worked because the dma-iommu implementation of sw_msi is tied to a single domain. Implement the sw_msi mapping directly and use a global per-fd table to associate assigned IOVA to the MSI pages. This allows the MSI pages to be loaded into a domain before it is attached ensuring that MSI is not disrupted. Link: https://patch.msgid.link/r/e13d23eeacd67c0a692fc468c85b483f4dd51c57.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-21iommu: Turn fault_data to iommufd private pointerNicolin Chen
A "fault_data" was added exclusively for the iommufd_fault_iopf_handler() used by IOPF/PRI use cases, along with the attach_handle. Now, the iommufd version of the sw_msi function will reuse the attach_handle and fault_data for a non-fault case. Rename "fault_data" to "iommufd_hwpt" so as not to confine it to a "fault" case. Move it into a union to be the iommufd private pointer. A following patch will move the iova_cookie to the union for dma-iommu too after the iommufd_sw_msi implementation is added. Since we have two unions now, add some simple comments for readability. Link: https://patch.msgid.link/r/ee5039503f28a16590916e9eef28b917e2d1607a.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-21irqchip: Have CONFIG_IRQ_MSI_IOMMU be selected by irqchips that need itJason Gunthorpe
Currently, IRQ_MSI_IOMMU is selected if DMA_IOMMU is available to provide an implementation for iommu_dma_prepare/compose_msi_msg(). However, it'll make more sense for irqchips that call prepare/compose to select it, and that will trigger all the additional code and data to be compiled into the kernel. If IRQ_MSI_IOMMU is selected with no IOMMU side implementation, then the prepare/compose() will be NOP stubs. If IRQ_MSI_IOMMU is not selected by an irqchip, then the related code on the iommu side is compiled out. Link: https://patch.msgid.link/r/a2620f67002c5cdf974e89ca3bf905f5c0817be6.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-21iommu: Make iommu_dma_prepare_msi() into a generic operationJason Gunthorpe
SW_MSI supports IOMMU to translate an MSI message before the MSI message is delivered to the interrupt controller. On such systems, an iommu_domain must have a translation for the MSI message for interrupts to work. The IRQ subsystem will call into IOMMU to request that a physical page be set up to receive MSI messages, and the IOMMU then sets an IOVA that maps to that physical page. Ultimately the IOVA is programmed into the device via the msi_msg. Generalize this by allowing iommu_domain owners to provide implementations of this mapping. Add a function pointer in struct iommu_domain to allow a domain owner to provide its own implementation. Have dma-iommu supply its implementation for IOMMU_DOMAIN_DMA types during the iommu_get_dma_cookie() path. For IOMMU_DOMAIN_UNMANAGED types used by VFIO (and iommufd for now), have the same iommu_dma_sw_msi set as well in the iommu_get_msi_cookie() path. Hold the group mutex while in iommu_dma_prepare_msi() to ensure the domain doesn't change or become freed while running. Races with IRQ operations from VFIO and domain changes from iommufd are possible here. Replace the msi_prepare_lock with a lockdep assertion for the group mutex as documentation. For the dmau_iommu.c each iommu_domain is unique to a group. Link: https://patch.msgid.link/r/4ca696150d2baee03af27c4ddefdb7b0b0280e7b.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-21genirq/msi: Refactor iommu_dma_compose_msi_msg()Jason Gunthorpe
The two-step process to translate the MSI address involves two functions, iommu_dma_prepare_msi() and iommu_dma_compose_msi_msg(). Previously iommu_dma_compose_msi_msg() needed to be in the iommu layer as it had to dereference the opaque cookie pointer. Now, the previous patch changed the cookie pointer into an integer so there is no longer any need for the iommu layer to be involved. Further, the call sites of iommu_dma_compose_msi_msg() all follow the same pattern of setting an MSI message address_hi/lo to non-translated and then immediately calling iommu_dma_compose_msi_msg(). Refactor iommu_dma_compose_msi_msg() into msi_msg_set_addr() that directly accepts the u64 version of the address and simplifies all the callers. Move the new helper to linux/msi.h since it has nothing to do with iommu. Aside from refactoring, this logically prepares for the next patch, which allows multiple implementation options for iommu_dma_prepare_msi(). So, it does not make sense to have the iommu_dma_compose_msi_msg() in dma-iommu.c as it no longer provides the only iommu_dma_prepare_msi() implementation. Link: https://patch.msgid.link/r/eda62a9bafa825e9cdabd7ddc61ad5a21c32af24.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-21genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookieJason Gunthorpe
The IOMMU translation for MSI message addresses has been a 2-step process, separated in time: 1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address is stored in the MSI descriptor when an MSI interrupt is allocated. 2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a translated message address. This has an inherent lifetime problem for the pointer stored in the cookie that must remain valid between the two steps. However, there is no locking at the irq layer that helps protect the lifetime. Today, this works under the assumption that the iommu domain is not changed while MSI interrupts being programmed. This is true for normal DMA API users within the kernel, as the iommu domain is attached before the driver is probed and cannot be changed while a driver is attached. Classic VFIO type1 also prevented changing the iommu domain while VFIO was running as it does not support changing the "container" after starting up. However, iommufd has improved this so that the iommu domain can be changed during VFIO operation. This potentially allows userspace to directly race VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()). This potentially causes both the cookie pointer and the unlocked call to iommu_get_domain_for_dev() on the MSI translation path to become UAFs. Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA address is already known during iommu_dma_prepare_msi() and cannot change. Thus, it can simply be stored as an integer in the MSI descriptor. The other UAF related to iommu_get_domain_for_dev() will be addressed in patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by using the IOMMU group mutex. Link: https://patch.msgid.link/r/a4f2cd76b9dc1833ee6c1cf325cba57def22231c.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-16Linux 6.14-rc3v6.14-rc3Linus Torvalds
2025-02-16Merge tag 'kbuild-fixes-v6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix annoying logs when building tools in parallel - Fix the Debian linux-headers package build again - Fix the target triple detection for userspace programs on Clang * tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: Fix a few typos in a comment kbuild: userprogs: fix bitsize and target detection on clang kbuild: fix linux-headers package build when $(CC) cannot link userspace tools: fix annoying "mkdir -p ..." logs when building tools in parallel
2025-02-16Merge tag 'driver-core-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core api addition from Greg KH: "Here is a driver core new api for 6.14-rc3 that is being added to allow platform devices from stop being abused. It adds a new 'faux_device' structure and bus and api to allow almost a straight or simpler conversion from platform devices that were not really a platform device. It also comes with a binding for rust, with an example driver in rust showing how it's used. I'm adding this now so that the patches that convert the different drivers and subsystems can all start flowing into linux-next now through their different development trees, in time for 6.15-rc1. We have a number that are already reviewed and tested, but adding those conversions now doesn't seem right. For now, no one is using this, and it passes all build tests from 0-day and linux-next, so all should be good" * tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: rust/kernel: Add faux device bindings driver core: add a faux bus for use when a simple device/bus is needed
2025-02-16Merge tag 'tty-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for some reported problems. Nothing major, just: - sc16is7xx irq check fix - 8250 fifo underflow fix - serial_port and 8250 iotype fixes Most of these have been in linux-next already, and all have passed 0-day testing" * tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: Fix fifo underflow on flush serial: 8250_pnp: Remove unneeded ->iotype assignment serial: 8250_platform: Remove unneeded ->iotype assignment serial: 8250_of: Remove unneeded ->iotype assignment serial: port: Make ->iotype validation global in __uart_read_properties() serial: port: Always update ->iotype in __uart_read_properties() serial: port: Assign ->iotype correctly when ->iobase is set serial: sc16is7xx: Fix IRQ number check behavior
2025-02-16Merge tag 'usb-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes, and new device ids, for 6.14-rc3. Lots of tiny stuff for reported problems, including: - new device ids and quirks - usb hub crash fix found by syzbot - dwc2 driver fix - dwc3 driver fixes - uvc gadget driver fix - cdc-acm driver fixes for a variety of different issues - other tiny bugfixes Almost all of these have been in linux-next this week, and all have passed 0-day testing" * tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY usb: roles: set switch registered flag early on usb: gadget: uvc: Fix unstarted kthread worker USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist usb: gadget: core: flush gadget workqueue after device removal USB: gadget: f_midi: f_midi_complete to call queue_work usb: core: fix pipe creation for get_bMaxPacketSize0 usb: dwc3: Fix timeout issue during controller enter/exit from halt state USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access usb: xhci: Restore xhci_pci support for Renesas HCs USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: gadget: f_midi: fix MIDI Streaming descriptor lengths usb: dwc2: gadget: remove of_node reference upon udc_stop ...
2025-02-16Merge tag 'irq_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq Kconfig cleanup from Borislav Petkov: - Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS * tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS
2025-02-16Merge tag 'perf_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Borislav Petkov: - Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being enabled after handoff to the OS - Check CPUID(0x23) leaf and subleafs presence properly - Remove the PEBS-via-PT feature from being supported on hybrid systems - Fix perf record/top default commands on systems without a raw PMU registered * tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Ensure LBRs are disabled when a CPU is starting perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF perf/x86/intel: Clean up PEBS-via-PT on hybrid perf/x86/rapl: Fix the error checking order
2025-02-16Merge tag 'sched_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Clarify what happens when a task is woken up from the wake queue and make clear its removal from that queue is atomic * tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Clarify wake_up_q()'s write to task->wake_q.next
2025-02-16Merge tag 'objtool_urgent_for_v6.14_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Move a warning about a lld.ld breakage into the verbose setting as said breakage has been fixed in the meantime - Teach objtool to ignore dangling jump table entries added by Clang * tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Move dodgy linker warn to verbose objtool: Ignore dangling jump table entries
2025-02-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Large set of fixes for vector handling, especially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours - Fix use of kernel VAs at EL2 when emulating timers with nVHE - Small set of pKVM improvements and cleanups x86: - Fix broken SNP support with KVM module built-in, ensuring the PSP module is initialized before KVM even when the module infrastructure cannot be used to order initcalls - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1 - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) x86/sev: Fix broken SNP support with KVM module built-in KVM: SVM: Ensure PSP module is initialized if KVM module is built-in crypto: ccp: Add external API interface for PSP module initialization KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic() KVM: arm64: timer: Drop warning on failed interrupt signalling KVM: arm64: Fix alignment of kvm_hyp_memcache allocations KVM: arm64: Convert timer offset VA when accessed in HYP code KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp() KVM: arm64: Eagerly switch ZCR_EL{1,2} KVM: arm64: Mark some header functions as inline KVM: arm64: Refactor exit handlers KVM: arm64: Refactor CPTR trap deactivation KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN KVM: arm64: Remove host FPSIMD saving for non-protected KVM KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop KVM: nSVM: Enter guest mode before initializing nested NPT MMU KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper ...
2025-02-16Merge tag 'mips-fixes_6.14_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "Fix for o32 ptrace/get_syscall_info" * tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fix mips_get_syscall_arg() for o32 MIPS: Export syscall stack arguments properly for remote use
2025-02-15Merge tag 'devicetree-fixes-for-6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and powertip,{st7272|hx8238a} displays - Fix compatible for TI am62a7 dss - Add a kunit test for __of_address_resource_bounds() * tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible dt-bindings: display: ti: Fix compatible for am62a7 dss of: address: Add kunit test for __of_address_resource_bounds() dt-bindings: clock: qcom: Add QCS8300 video clock controller dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300 dt-bindings: clock: qcom: Add GPU clocks for QCS8300
2025-02-15Merge tag 'uml-for-linus-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Richard Weinberger: - Align signal stack correctly - Convert to raw spinlocks where needed (irq and virtio) - FPU related fixes * tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: convert irq_lock to raw spinlock um: virtio_uml: use raw spinlock um: virt-pci: don't use kmalloc() um: fix execve stub execution on old host OSs um: properly align signal stack on x86_64 um: avoid copying FP state from init_task um: add back support for FXSAVE registers
2025-02-15Merge tag 'trace-ring-buffer-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace ring buffer fixes from Steven Rostedt: - Enable resize on mmap() error When a process mmaps a ring buffer, its size is locked and resizing is disabled. But if the user passes in a wrong parameter, the mmap() can fail after the resize was disabled and the mmap() exits with error without reenabling the ring buffer resize. This prevents the ring buffer from ever being resized after that. Reenable resizing of the ring buffer on mmap() error. - Have resizing return proper error and not always -ENOMEM If the ring buffer is mmapped by one task and another task tries to resize the buffer it will error with -ENOMEM. This is confusing to the user as there may be plenty of memory available. Have it return the error that actually happens (in this case -EBUSY) where the user can understand why the resize failed. - Test the sub-buffer array to validate persistent memory buffer On boot up, the initialization of the persistent memory buffer will do a validation check to see if the content of the data is valid, and if so, it will use the memory as is, otherwise it re-initializes it. There's meta data in this persistent memory that keeps track of which sub-buffer is the reader page and an array that states the order of the sub-buffers. The values in this array are indexes into the sub-buffers. The validator checks to make sure that all the entries in the array are within the sub-buffer list index, but it does not check for duplications. While working on this code, the array got corrupted and had duplicates, where not all the sub-buffers were accounted for. This passed the validator as all entries were valid, but the link list was incorrect and could have caused a crash. The corruption only produced incorrect data, but it could have been more severe. To fix this, create a bitmask that covers all the sub-buffer indexes and set it to all zeros. While iterating the array checking the values of the array content, have it set a bit corresponding to the index in the array. If the bit was already set, then it is a duplicate and mark the buffer as invalid and reset it. - Prevent mmap()ing persistent ring buffer The persistent ring buffer uses vmap() to map the persistent memory. Currently, the mmap() logic only uses virt_to_page() to get the page from the ring buffer memory and use that to map to user space. This works because a normal ring buffer uses alloc_page() to allocate its memory. But because the persistent ring buffer use vmap() it causes a kernel crash. Fixing this to work with vmap() is not hard, but since mmap() on persistent memory buffers never worked, just have the mmap() return -ENODEV (what was returned before mmap() for persistent memory ring buffers, as they never supported mmap. Normal buffers will still allow mmap(). Implementing mmap() for persistent memory ring buffers can wait till the next merge window. - Fix polling on persistent ring buffers There's a "buffer_percent" option (default set to 50), that is used to have reads of the ring buffer binary data block until the buffer fills to that percentage. The field "pages_touched" is incremented every time a new sub-buffer has content added to it. This field is used in the calculations to determine the amount of content is in the buffer and if it exceeds the "buffer_percent" then it will wake the task polling on the buffer. As persistent ring buffers can be created by the content from a previous boot, the "pages_touched" field was not updated. This means that if a task were to poll on the persistent buffer, it would block even if the buffer was completely full. It would block even if the "buffer_percent" was zero, because with "pages_touched" as zero, it would be calculated as the buffer having no content. Update pages_touched when initializing the persistent ring buffer from a previous boot. * tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Update pages_touched to reflect persistent buffer content tracing: Do not allow mmap() of persistent ring buffer ring-buffer: Validate the persistent meta data subbuf array tracing: Have the error of __tracing_resize_ring_buffer() passed to user ring-buffer: Unlock resize on mmap error
2025-02-15ring-buffer: Update pages_touched to reflect persistent buffer contentSteven Rostedt
The pages_touched field represents the number of subbuffers in the ring buffer that have content that can be read. This is used in accounting of "dirty_pages" and "buffer_percent" to allow the user to wait for the buffer to be filled to a certain amount before it reads the buffer in blocking mode. The persistent buffer never updated this value so it was set to zero, and this accounting would take it as it had no content. This would cause user space to wait for content even though there's enough content in the ring buffer that satisfies the buffer_percent. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-15tracing: Do not allow mmap() of persistent ring bufferSteven Rostedt
When trying to mmap a trace instance buffer that is attached to reserve_mem, it would crash: BUG: unable to handle page fault for address: ffffe97bd00025c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2862f3067 P4D 2862f3067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:validate_page_before_insert+0x5/0xb0 Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89 RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246 RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29 RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08 RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000 R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000 FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x1f ? __die+0x2e/0x40 ? page_fault_oops+0x157/0x2b0 ? search_module_extables+0x53/0x80 ? validate_page_before_insert+0x5/0xb0 ? kernelmode_fixup_or_oops.isra.0+0x5f/0x70 ? __bad_area_nosemaphore+0x16e/0x1b0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x77/0x90 ? exc_page_fault+0x22b/0x230 ? asm_exc_page_fault+0x2b/0x30 ? validate_page_before_insert+0x5/0xb0 ? vm_insert_pages+0x151/0x400 __rb_map_vma+0x21f/0x3f0 ring_buffer_map+0x21b/0x2f0 tracing_buffers_mmap+0x70/0xd0 __mmap_region+0x6f0/0xbd0 mmap_region+0x7f/0x130 do_mmap+0x475/0x610 vm_mmap_pgoff+0xf2/0x1d0 ksys_mmap_pgoff+0x166/0x200 __x64_sys_mmap+0x37/0x50 x64_sys_call+0x1670/0x1d70 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reason was that the code that maps the ring buffer pages to user space has: page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]); And uses that in: vm_insert_pages(vma, vma->vm_start, pages, &nr_pages); But virt_to_page() does not work with vmap()'d memory which is what the persistent ring buffer has. It is rather trivial to allow this, but for now just disable mmap() of instances that have their ring buffer from the reserve_mem option. If an mmap() is performed on a persistent buffer it will return -ENODEV just like it would if the .mmap field wasn't defined in the file_operations structure. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-02-15Merge tag 'i2c-for-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "MAINTAINERS maintenance. Changed email, added entry, deleted entry falling back to a generic one" * tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver MAINTAINERS: delete entry for AXXIA I2C MAINTAINERS: Use my kernel.org address for I2C ACPI work
2025-02-15Merge tag 's390-6.14-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix isolated VFs handling by verifying that a VF’s parent PF is locally owned before registering it in an existing PCI domain - Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to workaround gcc failure in handling __builtin_constant_p() in this case - Fix CHPID "configure" attribute caching in CIO by not updating the cache when SCLP returns no data, ensuring consistent sysfs output - Remove CONFIG_LSM from default configs and rely on defaults, which enables BPF LSM hook * tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix handling of isolated VFs s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn() s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES s390/cio: Fix CHPID "configure" attribute caching s390/configs: Remove CONFIG_LSM
2025-02-16modpost: Fix a few typos in a commentUwe Kleine-König
Namely: s/becasue/because/ and s/wiht/with/ plus an added article. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-02-16kbuild: userprogs: fix bitsize and target detection on clangThomas Weißschuh
scripts/Makefile.clang was changed in the linked commit to move --target from KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope. However that variable is not inspected by the userprogs logic, breaking cross compilation on clang. Use both variables to detect bitsize and target arguments for userprogs. Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-02-15Merge tag 'rust-fixes-6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull rust fixes from Miguel Ojeda: - Fix objtool warning due to future Rust 1.85.0 (to be released in a few days) - Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning * tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: rust: rbtree: fix overindented list item objtool/rust: add one more `noreturn` Rust function
2025-02-15tegra210-adma: fix 32-bit x86 buildLinus Torvalds
The Tegra210 Audio DMA controller driver did a plain divide: page_no = (res_page->start - res_base->start) / cdata->ch_base_offset; which causes problems on 32-bit x86 configurations that have 64-bit resource sizes: x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe': tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3' because gcc doesn't generate the trivial code for a 64-by-32 divide, turning it into a function call to do a full 64-by-64 divide. And the kernel intentionally doesn't provide that helper function, because 99% of the time all you want is the narrower version. Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is purely for build testing, so this really is just about build coverage failure. But build coverage is good. Side note: div_u64() would be suboptimal if you actually have a 32-bit resource_t, so our "helper" for divides are admittedly making it harder than it should be to generate good code for all the possible cases. At some point, I'll consider 32-bit x86 so entirely legacy that I can't find it in myself to care any more, and we'll just add the __udivdi3 library function. But for now, the right thing to do is to use "div_u64()" to show that you know that you are doing the simpler divide with a 32-bit number. And the build error enforces that. While fixing the build issue, also check for division-by-zero, and for overflow. Which hopefully cannot happen on real production hardware, but the value of 'ch_base_offset' can definitely be zero in other places. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-02-15Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix interrupt handling issues in gpio-bcm-kona - add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious wake up events - add missing return value checks to gpio-stmpe - fix a crash in error path in gpiochip_get_ngpios() * tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Fix crash on error in gpiochip_get_ngpios() gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock gpiolib: acpi: Add a quirk for Acer Nitro ANV14 gpio: bcm-kona: Add missing newline to dev_err format string gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
2025-02-15kbuild: fix linux-headers package build when $(CC) cannot link userspaceMasahiro Yamada
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package"), the linux-headers Debian package fails to build when $(CC) cannot build userspace applications, for example, when using toolchains installed by the 0day bot. The host programs in the linux-headers package should be rebuilt using the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC). Hence, the variable 'CC' must be expanded in this shell script instead of in the top-level Makefile. Commit f354fc88a72a ("kbuild: install-extmod-build: add missing quotation marks for CC variable") was not a correct fix because CC="ccache gcc" should be unrelated when rebuilding userspace tools. Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package") Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-15tools: fix annoying "mkdir -p ..." logs when building tools in parallelMasahiro Yamada
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds show awkward "mkdir -p ..." logs. $ make -j16 [ snip ] mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids Defining MAKEFLAGS=<value> on the command line wipes out command line switches from the resultant MAKEFLAGS definition, even though the command line switches are active. [1] MAKEFLAGS puts all single-letter options into the first word, and that word will be empty if no single-letter options were given. [2] However, this breaks if MAKEFLAGS=<value> is given on the command line. The tools/ and tools/% targets set MAKEFLAGS=<value> on the command line, which breaks the following code in tools/scripts/Makefile.include: short-opts := $(firstword -$(MAKEFLAGS)) If MAKEFLAGS really needs modification, it should be done through the environment variable, as follows: MAKEFLAGS=<value> $(MAKE) ... That said, I question whether modifying MAKEFLAGS is necessary here. The only flag we might want to exclude is --no-print-directory, as the tools build system changes the working directory. However, people might find the "Entering/Leaving directory" logs annoying. I simply removed the offending MAKEFLAGS=<value>. [1]: https://savannah.gnu.org/bugs/?62469 [2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system") Fixes: a50e43332756 ("perf tools: Honor parallel jobs") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Daniel Xu <dxu@dxuuu.xyz>
2025-02-14Merge tag 'alpha-fixes-v6.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha fixes from Matt Turner: "A few changes for alpha, including some important fixes for kernel stack alignment" * tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Use str_yes_no() helper in pci_dac_dma_supported() alpha: Replace one-element array with flexible array member alpha: align stack for page fault and user unaligned trap handlers alpha: make stack 16-byte aligned (most cases) alpha: replace hardcoded stack offsets with autogenerated ones
2025-02-14Merge tag 'pci-v6.14-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Update a BUILD_BUG_ON() usage that works on current compilers, but breaks compilation on gcc 5.3.1 (Alex Williamson) - Avoid use of FLR for Mediatek MT7922 WiFi; the device previously worked after a long timeout and fallback to SBR, but after a recent RRS change it doesn't work at all after FLR (Bjorn Helgaas) * tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Avoid FLR for Mediatek MT7922 WiFi PCI: Fix BUILD_BUG_ON usage for old gcc
2025-02-14Merge tag 'kvm-x86-fixes-6.14-rcN' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM fixes for 6.14 part 1 - Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated by KVM to fix a NULL pointer dereference. - Enter guest mode (L2) from KVM's perspective before initializing the vCPU's nested NPT MMU so that the MMU is properly tagged for L2, not L1. - Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the guest's value may be stale if a VM-Exit is handled in the fastpath.
2025-02-14x86/sev: Fix broken SNP support with KVM module built-inAshish Kalra
Fix issues with enabling SNP host support and effectively SNP support which is broken with respect to the KVM module being built-in. SNP host support is enabled in snp_rmptable_init() which is invoked as device_initcall(). SNP check on IOMMU is done during IOMMU PCI init (IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is currently invoked via device_initcall() and cannot be invoked via subsys_initcall() as core IOMMU subsystem gets initialized via subsys_initcall(). Now, if kvm_amd module is built-in, it gets initialized before SNP host support is enabled in snp_rmptable_init() : [ 10.131811] kvm_amd: TSC scaling supported [ 10.136384] kvm_amd: Nested Virtualization enabled [ 10.141734] kvm_amd: Nested Paging enabled [ 10.146304] kvm_amd: LBR virtualization supported [ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509) [ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99) [ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99) [ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported [ 10.177052] kvm_amd: Virtual GIF supported ... ... [ 10.201648] kvm_amd: in svm_enable_virtualization_cpu And then svm_x86_ops->enable_virtualization_cpu() (svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following: wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa); So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs. snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu() as following : ... [ 11.256138] kvm_amd: in svm_enable_virtualization_cpu ... [ 11.264918] SEV-SNP: in snp_rmptable_init This triggers a #GP exception in snp_rmptable_init() when snp_enable() is invoked to set SNP_EN in SYSCFG MSR: [ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30) ... [ 11.294404] Call Trace: [ 11.294482] <IRQ> [ 11.294513] ? show_stack_regs+0x26/0x30 [ 11.294522] ? ex_handler_msr+0x10f/0x180 [ 11.294529] ? search_extable+0x2b/0x40 [ 11.294538] ? fixup_exception+0x2dd/0x340 [ 11.294542] ? exc_general_protection+0x14f/0x440 [ 11.294550] ? asm_exc_general_protection+0x2b/0x30 [ 11.294557] ? __pfx_snp_enable+0x10/0x10 [ 11.294567] ? native_write_msr+0x8/0x30 [ 11.294570] ? __snp_enable+0x5d/0x70 [ 11.294575] snp_enable+0x19/0x20 [ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0 [ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20 [ 11.294589] __sysvec_call_function+0x20/0x90 [ 11.294596] sysvec_call_function+0x80/0xb0 [ 11.294601] </IRQ> [ 11.294603] <TASK> [ 11.294605] asm_sysvec_call_function+0x1f/0x30 ... [ 11.294631] arch_cpu_idle+0xd/0x20 [ 11.294633] default_idle_call+0x34/0xd0 [ 11.294636] do_idle+0x1f1/0x230 [ 11.294643] ? complete+0x71/0x80 [ 11.294649] cpu_startup_entry+0x30/0x40 [ 11.294652] start_secondary+0x12d/0x160 [ 11.294655] common_startup_64+0x13e/0x141 [ 11.294662] </TASK> This #GP exception is getting triggered due to the following errata for AMD family 19h Models 10h-1Fh Processors: Processor may generate spurious #GP(0) Exception on WRMSR instruction: Description: The Processor will generate a spurious #GP(0) Exception on a WRMSR instruction if the following conditions are all met: - the target of the WRMSR is a SYSCFG register. - the write changes the value of SYSCFG.SNPEn from 0 to 1. - One of the threads that share the physical core has a non-zero value in the VM_HSAVE_PA MSR. The document being referred to above: https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf To summarize, with kvm_amd module being built-in, KVM/SVM initialization happens before host SNP is enabled and this SVM initialization sets VM_HSAVE_PA to non-zero, which then triggers a #GP when SYSCFG.SNPEn is being set and this will subsequently cause SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not set on all CPUs. Essentially SNP host enabling code should be invoked before KVM initialization, which is currently not the case when KVM is built-in. Add fix to call snp_rmptable_init() early from iommu_snp_enable() directly and not invoked via device_initcall() which enables SNP host support before KVM initialization with kvm_amd module built-in. Add additional handling for `iommu=off` or `amd_iommu=off` options. Note that IOMMUs need to be enabled for SNP initialization, therefore, if host SNP support is enabled but late IOMMU initialization fails then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity checks in SNP firmware will fail with invalid configuration error as below: [ 9.723114] ccp 0000:23:00.1: sev enabled [ 9.727602] ccp 0000:23:00.1: psp enabled [ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002) [ 9.739098] ccp 0000:a2:00.1: no command queues available [ 9.745167] ccp 0000:a2:00.1: psp enabled [ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3 [ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5 Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: Joerg Roedel <jroedel@suse.de> Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14KVM: SVM: Ensure PSP module is initialized if KVM module is built-inSean Christopherson
The kernel's initcall infrastructure lacks the ability to express dependencies between initcalls, whereas the modules infrastructure automatically handles dependencies via symbol loading. Ensure the PSP SEV driver is initialized before proceeding in sev_hardware_setup() if KVM is built-in as the dependency isn't handled by the initcall infrastructure. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14crypto: ccp: Add external API interface for PSP module initializationSean Christopherson
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be loaded before KVM module. In case of module loading any dependent modules are automatically loaded but in case of built-in modules there is no inherent mechanism available to specify dependencies between modules and ensure that any dependent modules are loaded implicitly. Add a new external API interface for PSP module initialization which allows PSP SEV driver to be loaded explicitly if KVM is built-in. Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-14Merge tag 'kvmarm-fixes-6.14-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #2 - Large set of fixes for vector handling, specially in the interactions between host and guest state. This fixes a number of bugs affecting actual deployments, and greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland for dealing with this thankless task. - Fix an ugly race between vcpu and vgic creation/init, resulting in unexpected behaviours. - Fix use of kernel VAs at EL2 when emulating timers with nVHE. - Small set of pKVM improvements and cleanups.
2025-02-14Merge tag 'thermal-6.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix a regression caused by an inadvertent change of the THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal commits (Zhang Rui) and drop a stale piece of documentation (Daniel Lezcano)" * tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/cpufreq_cooling: Remove structure member documentation thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
2025-02-14Merge tag 'mmc-v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mtk-sd: Fix register settings for hs400(es) mode - sdhci_am654: Revert patch for start-signal-voltage-switch * tag 'mmc-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mtk-sd: Fix register settings for hs400(es) mode Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"
2025-02-14Merge tag 'v6.14-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fix from Steve French: "SMB3 client multichannel fix" * tag 'v6.14-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: pick channels for individual subrequests
2025-02-14Merge tag 'efi-fixes-for-v6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute into account when placing the kernel image in memory at boot. Otherwise, the presence of the kernel image could prevent such a memory region from being unplugged at runtime if it was 'cold plugged', i.e., already plugged in at boot time (and exposed via the EFI memory map). This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory attribute is used consistently by Linux before it ever turns up in production, ensuring that we can make meaningful use of it without running the risk of regressing existing users" * tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Use BIT_ULL() constants for memory attributes efi: Avoid cold plugged memory for placing the kernel
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 17:15:46 +0000