Age | Commit message (Collapse) | Author |
|
CS42888 codec provides 4 multi-bit ADC and 8 multi-bit DAC.
Add support for this codec in imx-card ASoC machine driver.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/1728460004-364-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some cases, ASoC machine driver may modify the mclk frequency
according to sample rate but the value in codec is still initial
frequency which should be replaced. For example, we should update
mclk before setup for cs42xx8 mclk relating registers.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/1728460004-364-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Binbin Zhou <zhoubinbin@loongson.cn>:
This patch set is mainly about Loongson i2s related issues.
Please allow me to briefly explain this patch set:
Patch 1-2: Add ES8323 codec required on Loongson-2K2000
Patch 3-4: Add uda1342 codec required on Loongson-2K1000
Patch 5: Fix the problem of unable to detect codec under FDT system.
Patch 6-7: Add Loongson i2s platform device support
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
When the audio started we print out here and there the Input and Output or only
the Input audio format for the module that is in path of the stream.
This is mostly OK but provides inconsistent an - in my opinion - hard to grasp
information.
The series reworks how the input/output format is selected and tries to improve
the consistency of the prints by applying universal rules:
- Module is not changing the format or it has only input or output and it has
single format on in and out side
Audio format for gain.1.1:
- Module is not changing the format or it has only input or output and it has
multiple formats on either in or out side
Audio format (in/out format index: 2/0) for host-copier.0.playback:
- Module is changing format then we print the input and output ones
- Input if it has single format
Input audio format for host-copier.0.capture:
- Input has multiple formats
Input audio format (format index: 0) for host-copier.0.playback:
Similar versions for the output format prints.
|
|
The Loongson I2S controller exists not only in PCI form (LS7A bridge
chip), but also in platform device form (Loongson-2K1000 SoC).
This patch adds support for platform device I2S controller.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/36c143358c7f48bc2e73c30e1d2009b2f2fc6498.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Loongson I2S controller binding with DT schema format using
json-schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/91e49509f1aaa70e635b6662ed9fffaf31165799.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The UDA1342 is an NXP audio codec, support 2x Stereo audio ADC (4x PGA
mic inputs), stereo audio DAC, with basic audio processing.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/927e46b48ca84865a216ce08e7c53df59c2a8c0b.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add NXP uda1342 CODEC binding with DT schema format using json-schema.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/d75045f8051d6e7a2a711c86a52a7c0a43775d08.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a codec driver for the Everest ES8323. It supports two separate
audio outputs and two separate audio inputs.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/135b19b06d19f34af8a0419bd3782ce5b8779870.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add DT bindings documentation for the Everest-semi ES8323 codec.
Everest-semi ES8323 codec is a low-power mono audio codec with I2S
audio interface and I2C control.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/414f829342a7b0f9d02a291eb9fd355cbef50005.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio format
Introduce a helper function to print out the audio format(s) used by a
module in a consistent way.
The printed text depends on the module format configuration, taking into
account if they have both input and output support, the format is changed
by the module and the number of formats supported on input/output.
For example, if a module does not change format, there is no point of
printing both in and out format, it is adequate to just state the format
the module is using.
While the function to generate the print is fairly complex (but not too
much), it will create a cleaner experience on the reader side by handling
the filtering of the information and present it in a way that it - I hope -
makes the developer's live a bit more easier when tracking format changes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_init_output_audio_fmt()
Similarly to sof_ipc4_init_input_audio_fmt(), move all output format
selection related prints (success or failure) inside of the
sof_ipc4_init_output_audio_fmt() function.
To do this, we need to pass swidget also, like with the input counterpart.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
output
Process modules are allowed to have zero outputs, thus zero output formats.
In this case there is no need for complicated if expressions to handle such
cases, we can just use a single if for the number of output formats and
the rest can be simplified.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_init_output_audio_fmt()
Use local variables for available_fmt->output_pin_fmts and
available_fmt->num_output_formats similarly to the input format selection
to make the two functions easier to understand and help with readability.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_init_input_audio_fmt()
Print out the information line for the found input format once to avoid
duplicated prints in case when multiple formats are available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_ipc4_init_input_audio_fmt()
At label in_fmt the if (pin_fmts_size && i < pin_fmts_size) is guarantied
to be true all the time, drop the check completely.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have local copies of available_fmt->input_pin_fmts and
available_fmt->num_input_formats, use them in the function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Printing the word `index` does not give extra information over printing:
`Pin #%d` which tells that the format line is for a specific pin.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241008110936.22534-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix issue of warning messages caused by some variables.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/065c0b7d84cf47d3a9186235447521c5@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added proper error handling for register value check that
return -EPERM when register value does not meet expected condition
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241008025923.10606-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the binding to yaml.
The codec seems to be from Innosilicon, but the compatible has ever only
been rockchip-based, as they sythesized the codec for the rk3036.
So the yaml file gets a name matching that compatible.
The only other notable change is the addition of the #sound-dai-cells
property, that is always required.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241007205639.2477635-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Rt722, rt721 and rt712 codecs are quite similar. Refactor the existing
spk_rtd_init() to support Realtek common multifunction SDCA codecs.
|
|
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series consists of smatch error fixes and code improvements
related to amd soundwire generic machine driver.
Vijendar Mukunda (3):
ASoC: amd: acp: fix for inconsistent indenting
ASoC: amd: acp: fix for cpu dai index logic
ASoC: amd: acp: refactor sof_card_dai_links_create() function
sound/soc/amd/acp/acp-sdw-sof-mach.c | 47 +++++++++++-----------------
1 file changed, 18 insertions(+), 29 deletions(-)
--
2.34.1
|
|
This is the initial codec driver for rt721-sdca.
It's a three functions (jack,mic,amp) soundwire driver.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
v2: Fix typo in mbq default registers.
v3: Include soundwire common functions for Realtek.
Link: https://patch.msgid.link/d18b35f8b6934fc6a2be6c4458a63fe5@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the first version of common functions for Realtek
soundwire codec driver.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/959e8dcb075948459be4463f6a4ca6ee@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Patch adds driver data & match table for rt721
multi-function codec on PTL-RVP at sdw link3.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007075955.12575-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge spk_rtd_init for multifunction sdca codecs:rt712/rt722
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007075955.12575-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable on-board rt722 based sound card for PTL RVP.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007075955.12575-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor sof_card_dai_links_create() function by replacing
'sof_ends' and 'sof_dais' structure declarations as
struct asoc_sdw_endpoint *sof_ends __free(kfree) = NULL;
struct asoc_sdw_dailink *sof_dais __free(kfree) = NULL;
Use above declarations to eliminate goto statements usage.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241007085321.3991149-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Multi link aggregation is not supported for acp6.3 platform.
Below combinations are supported.
- one sdw BE DAI <---> one-cpu DAI <---> one-codec DAI
- one sdw BE DAI <---> one-cpu DAI <---> multi-codec DAIs
As Single cpu dai is going to be created, In create_sdw_dailink() function
cpu dai index won't be incremented.
Refactor cpu dai index logic to fix below smatch static checker warning.
sound/soc/amd/acp/acp-sdw-sof-mach.c:157 create_sdw_dailink()
warn: iterator 'i' not incremented.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a201e871-375e-43eb-960d-5c048956c2ff@amd.com/T/
Fixes: 6d8348ddc56e ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241007085321.3991149-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix below Smatch static checker warning:
sound/soc/amd/acp/acp-sdw-sof-mach.c:365 sof_card_dai_links_create()
warn: inconsistent indenting
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a201e871-375e-43eb-960d-5c048956c2ff@amd.com/T/
Fixes: 6d8348ddc56e ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241007085321.3991149-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixes build issues with the KVM selftests
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
|
|
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Import list_is_first, list_is_last, list_replace, and list_replace_init.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
|
|
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix typo in word 'diagnostics' in documentation.
Signed-off-by: Anaswara T Rajan <anaswaratrajan@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005070056.16326-1-anaswaratrajan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support
domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding
to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
|
|
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|