summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-26wireless: brcmfmac: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26wireless: ath9k: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26wireless: ath5k: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26net: ath9k: Use NULL instead of falseSachin Kamat
The function returns a pointer. Hence return NULL instead of false. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ar5523: Add USB ID of D-Link WUA-2340 rev A1Albert Pool
Signed-off-by: Albert Pool <albertpool@solcon.nl> Reported-by: Michael Landrum <landrummd@gmail.com> Acked-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26rt2800: comment enable radio initialization sequenceStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26mwifiex: Remove casting the return value which is a void pointerJingoo Han
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: replace snprintf() with scnprintf()Zefir Kurtisi
Whenever the return value of snprintf() is used to calculate remaining buffer-space, we wanted to use sncprintf() instead. Indentation is adapted where possible. Some lines exceed the line width limit, either they did it already before, or since they can not be broken reasonably well. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Add DELL 1707 to supported card tableSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Update AR9485 1.1 initvalsSujith Manoharan
* Remove duplicate array mappings. * Fix ETSI CCA compliance. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Add and use initvals for channel 14Sujith Manoharan
This is missing for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Fix regulatory compliance for AR9462/AR9565Sujith Manoharan
Adjust the CCA values based on the regulatory domain present in the EEPROM. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Identify WB335 Antenna configurationSujith Manoharan
There are 2 types of WB335 cards, 1-antenna and 2-antenna. Identify them based on PCI subsystem IDs, this will be used for MCI/BTCOEX tweaks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Identify CUS252 cardsSujith Manoharan
These cards are based on WB335/AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Enable antenna diversity for WB335Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Add support for AR9565 v1.0.1 LNA diversitySujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Use correct RX gain table for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Fix antenna diversity init for AR9565Sujith Manoharan
Program the HW registers (AR_PHY_CCK_DETECT, AR_PHY_MC_GAIN_CTRL) with the correct values for AR9565 to allow LNA combining. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Bypass EEPROM for diversity cap for AR9565Sujith Manoharan
Use a default antenna diversity value for AR9565 instead of relying on the EEPROM/OTP programmed value. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Update initvals for AR9565 1.0Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville
2013-09-26ath10k: replenish HTT RX buffers in a taskletMichal Kazior
This starves FW RX ring buffer in case of excessive RX. This prevents from CPU being overwhelmed by RX indications/completions by naturally forbiddin FW to submit more RX. This fixes RX starvation on slow machines when under heavy RX traffic. kvalo: remove extra newline Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-26nl80211: enable IBSS support for channel switch announcementsSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: send a CSA action frame when changing channelSimon Wunderlich
IBSS members may not immediately be able to send out their beacon when performing CSA, therefore also send a CSA action frame. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add support for CSA in IBSS modeSimon Wunderlich
This function adds the channel switch announcement implementation for the IBSS code. It is triggered by userspace (mac80211/cfg) or by external channel switch announcement, which have to be adopted. Both CSAs in beacons and action frames are supported. As for AP mode, the channel switch is applied after some time. However in IBSS mode, the channel switch IEs are generated in the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: split off ibss disconnectSimon Wunderlich
IBSS CSA will require to disconnect if a channel switch fails, but mac80211 should search and re-connect after this disconnect. To allow such usage, split off the ibss disconnect process in a separate function which only performs the disconnect without overwriting nl80211-supplied parameters. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: split off channel switch parsing functionSimon Wunderlich
The channel switch parsing function can be re-used for the IBSS code, put the common part into an extra function. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [also move/rename chandef_downgrade] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26cfg80211: export cfg80211_chandef_dfs_requiredSimon Wunderlich
It will be used later by the IBSS CSA implementation of mac80211. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: do not override fixed_rate_idx in minstrel_ht_update_statsLorenzo Bianconi
Do not override max_tp_rate, max_tp_rate2 and max_prob_rate configured according to fixed_rate in minstrel_ht_update_stats throughput computation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add fixed_rate management to minstrel rcLorenzo Bianconi
Add the capability to use a fixed modulation rate to minstrel rate controller Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: change beacon/connection pollingStanislaw Gruszka
Since when we detect beacon lost we do active AP probing (using nullfunc frame or probe request) there is no need to have beacon polling. Flags IEEE80211_STA_BEACON_POLL seems to be used just for historical reasons. Change also make that after we start connection poll due to beacon loss, next received beacon will abort the poll. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: Remove superfluous is_multicast_ether_addr() callSergey Ryazanov
Remove superfluous call and use locally stored previous result. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: use ERR_CAST()Johannes Berg
No need for ERR_PTR(PTR_ERR()) since there's ERR_CAST, use it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add ieee80211_iterate_active_interfaces_rtnl()Johannes Berg
If it is needed to disconnect multiple virtual interfaces after (WoWLAN-) suspend, the most obvious approach would be to iterate all interfaces by calling ieee80211_iterate_active_interfaces() and then call ieee80211_resume_disconnect() for each one. This is what the iwlmvm driver does. Unfortunately, this causes a locking dependency from mac80211's iflist_mtx to the key_mtx. This is problematic as the former is intentionally never held while calling any driver operation to allow drivers to iterate with their own locks held. The key_mtx is held while installing a key into the driver though, so this new lock dependency means drivers implementing the logic above can no longer hold their own lock while iterating. To fix this, add a new ieee80211_iterate_active_interfaces_rtnl() function that iterates while the RTNL is already held. This is true during suspend/resume, so that then the locking dependency isn't introduced. While at it, also refactor the various interface iterators and keep only a single implementation called by the various cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26ath10k: align RX frames properlyMichal Kazior
Ethernet-like decapping mode leaves IP protocol frame not aligned to 4-byte boundaries. This leads to re-aligning in mac80211 which in turn leads to poor CPU cache behaviour on some machines. Since HW doesn't allow to change payload offset properly the solution is to force HW to decap in Native Wifi mode which always has 24-bytes long 802.11 header (even for QoS frames). This means IP frame is properly aligned in this decap mode. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-26ath10k: fix Native Wifi decap mode RXMichal Kazior
NWifi decap mode always reports 802.11 Data Frames, even when QoS Data Frames are actually received. This made mac80211 not report frame priority properly (since there was no QoS Control field). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-26ath10k: cleanup RX decap handlingMichal Kazior
Simplify decapping code and make it easier to understand. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-26ath10k: document decap modesMichal Kazior
Clarify how each decap mode works in one place. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-26ath10k: report A-MSDU subframes individuallyMichal Kazior
HW reports each A-MSDU subframe as a separate sk_buff. It is impossible to configure it to behave differently. Until now ath10k was reconstructing A-MSDUs from subframes which involved a lot of memory operations. This proved to be a significant contributor to degraded RX performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-25Bluetooth: Add new mgmt_set_advertising commandJohan Hedberg
This patch adds a new mgmt command for enabling and disabling LE advertising. The command depends on the LE setting being enabled first and will return a "rejected" response otherwise. The patch also adds safeguards so that there will ever only be one set_le or set_advertising command pending per adapter. The response handling and new_settings event sending is done in an asynchronous request callback, meaning raw HCI access from user space to enable advertising (e.g. hciconfig leadv) will not trigger the new_settings event. This is intentional since trying to support mixed raw HCI and mgmt access would mean adding extra state tracking or new helper functions, essentially negating the benefit of using the asynchronous request framework. The HCI_LE_ENABLED and HCI_LE_PERIPHERAL flags however are updated correctly even with raw HCI access so this will not completely break subsequent access over mgmt. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25Bluetooth: Add new mgmt setting for LE advertisingJohan Hedberg
This patch adds a new mgmt setting for LE advertising and hooks up the necessary places in the mgmt code to operate on the HCI_LE_PERIPHERAL flag (which corresponds to this setting). This patch does not yet add any new command for enabling the setting - that is left for a subsequent patch. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25Bluetooth: Use async request for LE enable/disableJohan Hedberg
This patch updates the code to use an asynchronous request for handling the enabling and disabling of LE support. This refactoring is necessary as a preparation for adding advertising support, since when LE is disabled we should also disable advertising, and the cleanest way to do this is to perform the two respective HCI commands in the same asynchronous request. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25Bluetooth: Move mgmt response convenience functions to a better locationJohan Hedberg
The settings_rsp and cmd_status_rsp functions can be useful for all mgmt command handlers when asynchronous request callbacks are used. They will e.g. be used by subsequent patches to change set_le to use an async request as well as a new set_advertising command. Therefore, move them higher up in the mgmt.c file to avoid unnecessary forward declarations or mixing this trivial change with other patches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25Bluetooth: Fix busy return for mgmt_set_powered in some casesJohan Hedberg
We should return a "busy" error always when there is another mgmt_set_powered operation in progress. Previously when powering on while the auto off timer was still set the code could have let two or more pending power on commands to be queued. This patch fixes the issue by moving the check for duplicate commands to an earlier point in the set_powered handler. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25Bluetooth: Clean up socket locking in l2cap_sock_recvmsgJohan Hedberg
This patch cleans up the locking login in l2cap_sock_recvmsg by pairing up each lock_sock call with a release_sock call. The function already has a "done" label that handles releasing the socket and returning from the function so the fix is rather simple. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25Bluetooth: Add clarifying comment to bt_sock_wait_state()Johan Hedberg
The bt_sock_wait_state requires the sk lock to be held (through lock_sock) so document it clearly in the code. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-23Bluetooth: btusb: Add support for Belkin F8065bfKen O'Brien
Add generic rule on encountering Belkin bluetooth usb device F8065bf. Relevant section from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms Signed-off-by: Ken O'Brien <kernel@kenobrien.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-22Bluetooth: Fix assignment of 0/1 to bool variablesPeter Senna Tschudin
Convert 0 to false and 1 to true when assigning values to bool variables. Inspired by commit 3db1cd5c05f35fb43eb134df6f321de4e63141f2. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @@ bool b; @@ ( -b = 0 +b = false | -b = 1 +b = true ) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-20Bluetooth: don't release the port in rfcomm_dev_state_change()Gianluca Anzolin
When the dlc is closed, rfcomm_dev_state_change() tries to release the port in the case it cannot get a reference to the tty. However this is racy and not even needed. Infact as Peter Hurley points out: 1. Only consider dlcs that are 'stolen' from a connected socket, ie. reused. Allocated dlcs cannot have been closed prior to port activate and so for these dlcs a tty reference will always be avail in rfcomm_dev_state_change() -- except for the conditions covered by #2b below. 2. If a tty was at some point previously created for this rfcomm, then either (a) the tty reference is still avail, so rfcomm_dev_state_change() will perform a hangup. So nothing to do, or, (b) the tty reference is no longer avail, and the tty_port will be destroyed by the last tty_port_put() in rfcomm_tty_cleanup. Again, no action required. 3. Prior to obtaining the dlc lock in rfcomm_dev_add(), rfcomm_dev_state_change() will not 'see' a rfcomm_dev so nothing to do here. 4. After releasing the dlc lock in rfcomm_dev_add(), rfcomm_dev_state_change() will 'see' an incomplete rfcomm_dev if a tty reference could not be obtained. Again, the best thing to do here is nothing. Any future attempted open() will block on rfcomm_dev_carrier_raised(). The unconnected device will exist until released by ioctl(RFCOMMRELEASEDEV). The patch removes the aforementioned code and uses the tty_port_tty_hangup() helper to hangup the tty. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-20ath10k: use msdu headroom to store txfragMichal Kazior
Instead of allocating sk_buff for a mere 16-byte tx fragment list buffer use headroom of the original msdu sk_buff. This decreases CPU cache pressure and improves performance. Measured improvement on AP135 is 560mbps -> 590mbps of UDP TX briding traffic. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 10:52:36 +0000