| Age | Commit message (Collapse) | Author |
|---|
|
While at it, convert declarations of type "unsigned" to "unsigned int".
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using SYSCALL_DEFINEx() is recommended, so use it also here.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
sys32_vm86_warning() is long gone.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If the compat entry point is equivalent to the native entry point, it
does not need to be specified explicitly.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@amacapital.net
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit
host. This also simplifies read_retpoline_hints() a bit and makes its
implementation similar to most of the other annotation reading
functions.
Reported-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b5bc2231b8ad ("objtool: Add retpoline validation")
Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Hitting the following hardlockup due to a race condition in
error CQE processing.
[26146.879798] bnxt_en 0000:04:00.0: QPLIB: FP: CQ Processed Req
[26146.886346] bnxt_en 0000:04:00.0: QPLIB: wr_id[1251] = 0x0 with status 0xa
[26156.350935] NMI watchdog: Watchdog detected hard LOCKUP on cpu 4
[26156.357470] Modules linked in: nfsd auth_rpcgss nfs_acl lockd grace
[26156.447957] CPU: 4 PID: 3413 Comm: kworker/4:1H Kdump: loaded
[26156.457994] Hardware name: Dell Inc. PowerEdge R430/0CN7X8,
[26156.466390] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[26156.472639] Call Trace:
[26156.475379] <NMI> [<ffffffff98d0d722>] dump_stack+0x19/0x1b
[26156.481833] [<ffffffff9873f775>] watchdog_overflow_callback+0x135/0x140
[26156.489341] [<ffffffff9877f237>] __perf_event_overflow+0x57/0x100
[26156.496256] [<ffffffff98787c24>] perf_event_overflow+0x14/0x20
[26156.502887] [<ffffffff9860a580>] intel_pmu_handle_irq+0x220/0x510
[26156.509813] [<ffffffff98d16031>] perf_event_nmi_handler+0x31/0x50
[26156.516738] [<ffffffff98d1790c>] nmi_handle.isra.0+0x8c/0x150
[26156.523273] [<ffffffff98d17be8>] do_nmi+0x218/0x460
[26156.528834] [<ffffffff98d16d79>] end_repeat_nmi+0x1e/0x7e
[26156.534980] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.543268] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.551556] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200
[26156.559842] <EOE> [<ffffffff98d083e4>] queued_spin_lock_slowpath+0xb/0xf
[26156.567555] [<ffffffff98d15690>] _raw_spin_lock+0x20/0x30
[26156.573696] [<ffffffffc08381a1>] bnxt_qplib_lock_buddy_cq+0x31/0x40 [bnxt_re]
[26156.581789] [<ffffffffc083bbaa>] bnxt_qplib_poll_cq+0x43a/0xf10 [bnxt_re]
[26156.589493] [<ffffffffc083239b>] bnxt_re_poll_cq+0x9b/0x760 [bnxt_re]
The issue happens if RQ poll_cq or SQ poll_cq or Async error event tries to
put the error QP in flush list. Since SQ and RQ of each error qp are added
to two different flush list, we need to protect it using locks of
corresponding CQs. Difference in order of acquiring the lock in
SQ poll_cq and RQ poll_cq can cause a hard lockup.
Revisits the locking strategy and removes the usage of qplib_cq.hwq.lock.
Instead of this lock, introduces qplib_cq.flush_lock to handle
addition/deletion of QPs in flush list. Also, always invoke the flush_lock
in order (SQ CQ lock first and then RQ CQ lock) to avoid any potential
deadlock.
Other than the poll_cq context, the movement of QP to/from flush list can
be done in modify_qp context or from an async error event from HW.
Synchronize these operations using the bnxt_re verbs layer CQ locks.
To achieve this, adds a call back to the HW abstraction layer(qplib) to
bnxt_re ib_verbs layer in case of async error event. Also, removes the
buddy cq functions as it is no longer required.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fix warning limit for kernel stack consumption:
drivers/infiniband/core/cq.c: In function 'ib_process_cq_direct':
drivers/infiniband/core/cq.c:78:1: error: the frame size of 1032 bytes
is larger than 1024 bytes [-Werror=frame-larger-than=]
Using smaller ib_wc array on the stack brings us comfortably below that
limit again.
Fixes: 246d8b184c10 ("IB/cq: Don't force IB_POLL_DIRECT poll context for ib_process_cq_direct")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Gorenko <sergeygo@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
"err" is either zero or possibly uninitialized here. It should be
-EINVAL.
Fixes: 427c1e7bcd7e ("{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The series that introduced dual port RoCE mode assumed that we don't have
a dual port HCA that use the mlx5 driver, this is not the case for
Connect-IB HCAs. This reasoning led to assigning 1 as the native port
index which causes issue when the second port is used.
For example query_pkey() when called on the second port will return values
of the first port. Make sure that we assign the right port index as the
native port index.
Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The commit cited below added a gid_type field (RoCEv1 or RoCEv2)
to GID properties.
When adding GIDs, this gid_type field was copied over to the
hardware gid table. However, when deleting GIDs, the gid_type field
was not copied over to the hardware gid table.
As a result, when running RoCEv2, all RoCEv2 gids in the
hardware gid table were set to type RoCEv1 when any gid was deleted.
This problem would persist until the next gid was added (which would again
restore the gid_type field for all the gids in the hardware gid table).
Fix this by copying over the gid_type field to the hardware gid table
when deleting gids, so that the gid_type of all remaining gids is
preserved when a gid is deleted.
Fixes: b699a859d17b ("IB/mlx4: Add gid_type to GID properties")
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When using IPv4 addresses in RoCEv2, the GID format for the mapped
IPv4 address should be: ::ffff:<4-byte IPv4 address>.
In the cited commit, IPv4 mapped IPV6 addresses had the 3 upper dwords
zeroed out by memset, which resulted in deleting the ffff field.
However, since procedure ipv6_addr_v4mapped() already verifies that the
gid has format ::ffff:<ipv4 address>, no change is needed for the gid,
and the memset can simply be removed.
Fixes: 7e57b85c444c ("IB/mlx4: Add support for setting RoCEv2 gids in hardware")
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
iWARP does not support RDMA WRITE or SEND with immediate data.
Driver should check this before submitting to FW and return an
immediate error
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Race in qedr_poll_cq, lastest_cqe wasn't protected by lock,
leading to a case where two context's accessing poll_cq at
the same time lead to one of them having a pointer to an old
latest_cqe and reading an invalid cqe element
Signed-off-by: Amit Radzi <Amit.Radzi@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fix iWARP connect and listen to use the mapped port for
ipv4 and ipv6. Without this fixed, running on a server
that has iwpmd enabled will not use the correct port
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The wrong parameter was passed to dst_neigh_lookup
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In practice this is really only meaningful in the context of the DM
multipath target (which uses dm_table_set_type() to set the type of
device DM should create via its "queue_mode" option).
So this change allows a DM multipath device with "queue_mode bio" to be
upgraded from DM_TYPE_BIO_BASED to DM_TYPE_NVME_BIO_BASED -- iff the
underlying device(s) are NVMe.
DM_TYPE_NVME_BIO_BASED is just a DM core implementation detail that
allows for NVMe-specific optimizations (e.g. use direct_make_request
instead of generic_make_request). If in the future there is no benefit
or need to distinguish NVMe vs not: then it will be removed.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
This eliminates the "queue_mode" configuration's "nvme" mode. There
wasn't anything NVMe-specific about that mode. It was named "nvme"
because it was a short name for the mode. But the entire point of the
mode was to optimize the multipath target for underlying devices that
are _not_ SCSI-based. Devices that aren't SCSI have no need for the
various SCSI device handler (scsi_dh) specific code in DM multipath.
But rather than narrowly define this scsi_dh vs not branching in terms
of "nvme": invert the logic so that we're just checking whether a
multipath device is layered on SCSI devices with scsi_dh attached.
This allows any future storage technology to avoid scsi_dh specific code
in the multipath target too.
Fixes: 848b8aefd4 ("dm mpath: optimize NVMe bio-based support")
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The strncmp function should compare 4 bytes.
Fixes: 22c11858e8002 ("dm: introduce DM_TYPE_NVME_BIO_BASED")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Upstream commit 4102d9de6d375 ("dm raid: fix rs_get_progress()
synchronization state/ratio") in combination with commit 7c29744ecce
("dm raid: simplify rs_get_progress()") introduced a regression by
incorrectly reporting a sync_ratio of 0 for degraded raid sets. This
caused lvm2 to fail to repair raid legs automatically.
Fix by identifying the degraded state by checking the MD_RECOVERY_INTR
flag and returning mddev->recovery_cp in case it is set.
MD sets recovery = [ MD_RECOVERY_RECOVER MD_RECOVERY_INTR
MD_RECOVERY_NEEDED ] when a RAID member fails. It then shuts down any
sync thread that is running and leaves us with all MD_RECOVERY_* flags
cleared. The bug occurs if a status is requested in the short time it
takes to shut down any sync thread and clear the flags, because we were
keying in on the MD_RECOVERY_NEEDED - understanding it to be the initial
phase of a “recover” sync thread. However, this is an incorrect
interpretation if MD_RECOVERY_INTR is also set.
This also explains why the bug only happened when automatic repair was
enabled and not a normal ‘manual’ method. It is impossible to react
quick enough to hit the problematic window without it being automated.
Fix passes automatic repair tests.
Fixes: 7c29744ecce ("dm raid: simplify rs_get_progress()")
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Otherwise an underlying device's teardown (e.g. SCSI) may race with the
DM ioctl or persistent reservation and result in dereferencing driver
memory that gets freed when the underlying device's final blkdev_put()
occurs.
bdgrab() only increases the refcount for the block_device's inode to
ensure the block_device struct itself will not be freed, but does not
guarantee the block_device will remain associated with the gendisk or
its storage.
Cc: stable@vger.kernel.org # 4.8+
Reported-by: David Jeffery <djeffery@redhat.com>
Suggested-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
gcc-6.3 and earlier show a new warning after a seemingly unrelated
change to the arm64 PAGE_KERNEL definition:
In file included from drivers/md/dm-bufio.c:14:0:
drivers/md/dm-bufio.c: In function 'alloc_buffer':
include/linux/sched/mm.h:182:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized]
current->flags = (current->flags & ~PF_MEMALLOC_NOIO) | flags;
^
The same warning happened earlier on linux-3.18 for MIPS and I did a
workaround for that, but now it's come back.
gcc-7 and newer are apparently smart enough to figure this out, and
other architectures don't show it, so the best I could come up with is
to rework the caller slightly in a way that makes it obvious enough to
all arm64 compilers what is happening here.
Fixes: 41acec624087 ("arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()")
Link: https://patchwork.kernel.org/patch/9692829/
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[snitzer: moved declarations inside conditional, altered vmalloc return]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sigingo fix from Eric Biederman:
"The kbuild test robot found that I accidentally moved si_pkey when I
was cleaning up siginfo_t. A short followed by an int with the int
having 8 byte alignment. Sheesh siginfo_t is a weird structure.
I have now corrected it and added build time checks that with a little
luck will catch any similar future mistakes. The build time checks
were sufficient for me to verify the bug and to verify my fix. So they
are at least useful this once."
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/x86: Include the field offsets in the build time checks
signal: Correct the offset of si_pkey in struct siginfo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fixes
- Fix random memory corruption when running as guest2 (e.g. KVM in
LPAR) and starting guest3 (nested KVM) with many CPUs (e.g. a nested
guest with 200 vcpu)
- io interrupt delivery counter was not exported
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Fixes for PPC KVM:
- Fix guest time accounting in the host
- Fix large-page backing for radix guests on POWER9
- Fix HPT guests on POWER9 backed by 2M or 1G pages
- Compile fixes for some configs and gcc versions
|
|
Make sure that the CRTC code will call the enable/disable_vblank hooks.
Otherwise, since the refcounting will be off, we might end up in a
situation where the vblank management functions are called while the CRTC
is off.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
|
|
In the case where mode_valid callback of our RGB connector was called
before mode_set was being called, the range of dividers would not be set,
resulting in a division by zero later on in the clk_round_rate logic.
Set the range of dividers before calling clk_round_rate to fix this.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-2-maxime.ripard@bootlin.com
|
|
The current logic to deal with old DT missing the LVDS properties doesn't
take into account whether the LVDS output is supported in the first place,
resulting in spurious error messages on SoCs where it doesn't even matter.
Introduce a new TCON flag to list if LVDS is supported at all to prevent
this from happening.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
|
|
trigger_on() means that the trigger is available but not ready, however
trigger_on() was making it ready. That can segfault if the signal comes
before trigger_ready(). e.g. (USR2 signal delivery not shown)
$ perf record -e intel_pt//u -S sleep 1
perf: Segmentation fault
Obtained 16 stack frames.
/home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6]
/home/ahunter/bin/perf() [0x43a45b]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5]
/home/ahunter/bin/perf() [0x4ec6c9]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4eca15]
/home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77]
/home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0]
/home/ahunter/bin/perf(cmd_record+0x722) [0x43c132]
/home/ahunter/bin/perf() [0x4a11ae]
/home/ahunter/bin/perf(main+0x5d4) [0x427fb4]
Note, for testing purposes, this is hard to hit unless you add some sleep()
in builtin-record.c before record__open().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 3dcc4436fa6f ("perf tools: Introduce trigger class")
Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prevent auxtrace_queues__process_index() from queuing AUX area data for
decoding when the --no-itrace option has been used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:
<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,
Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.
Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412d3 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dock line-out pin (NID 0x17 of ALC3254 codec) on Dell Precision
7520 may route to three different DACs, 0x02, 0x03 and 0x06. The
first two DACS have the volume amp controls while the last one
doesn't. And unfortunately, the auto-parser assigns this pin to DAC3,
resulting in the non-working volume control for the line out.
Fix it by disabling the routing to DAC3 on the corresponding pin.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199029
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Even if we don't have extended SCA support, we can have more than 64 CPUs
if we don't enable any HW features that might use the SCA entries.
Now, this works just fine, but we missed a return, which is why we
would actually store the SCA entries. If we have more than 64 CPUs, this
means writing outside of the basic SCA - bad.
Let's fix this. This allows > 64 CPUs when running nested (under vSIE)
without random crashes.
Fixes: a6940674c384 ("KVM: s390: allow 255 VCPUs when sca entries aren't used")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180306132758.21034-1-david@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
With ibm,dynamic-memory-v2 and ibm,drc-info coming around the same
time, byte22 in vector5 of ibm architecture vector table got set twice
separately. The end result is that guest kernel isn't advertising
support for ibm,dynamic-memory-v2.
Fix this by removing the duplicate assignment of byte22.
Fixes: 02ef6dd8109b ("powerpc: Enable support for ibm,drc-info devtree property")
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The internal mic boost on the T480 is too high. Fix this by applying the
ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This platform was only one phone Jack.
Add dummy lineout verb to fix automute mode disable.
This just the workaround.
[ More background information:
since the platform has only a headphone jack without speaker, the
driver doesn't create the auto-mute control. Meanwhile we do update
the headset mode via the automute hook in the driver, thus with this
setup, the headset won't be updated any longer.
By adding a dummy line-out pin here, the auto-mute is added by the
driver, and the headset update is triggered properly.
Note that this is different from the other
ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, which has the real line-out pin,
while this quirk adds a dummy line-out pin. -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Enable headset mode support for WYSE platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
when a system call is interrupted we might call the critical section
cleanup handler that re-does some of the operations. When we are between
.Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the
problem state registers r0-r7:
.Lcleanup_system_call:
[...]
0: # update accounting time stamp
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
# set up saved register r11
lg %r15,__LC_KERNEL_STACK
la %r9,STACK_FRAME_OVERHEAD(%r15)
stg %r9,24(%r11) # r11 pt_regs pointer
# fill pt_regs
mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC
---> stmg %r0,%r7,__PT_R0(%r9)
The problem is now, that we might have already zeroed out r0.
The fix is to move the zeroing of r0 after sysc_do_svc.
Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Fixes: 7041d28115e91 ("s390: scrub registers on kernel entry and KVM exit")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Due to an oversight when refactoring siginfo_t si_pkey has been in the
wrong position since 4.16-rc1. Add an explicit check of the offset of
every user space field in siginfo_t and compat_siginfo_t to make a
mistake like this hard to make in the future.
I have run this code on 4.15 and 4.16-rc1 with the position of si_pkey
fixed and all of the fields show up in the same location.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The change moving addr_lsb into the _sigfault union failed to take
into account that _sigfault._addr_bnd._lower being a pointer forced
the entire union to have pointer alignment. In practice this only
mattered for the offset of si_pkey which is why this has taken so long
to discover.
To correct this change _dummy_pkey and _dummy_bnd to have pointer type.
Reported-by: kernel test robot <shun.hao@intel.com>
Fixes: b68a68d3dcc1 ("signal: Move addr_lsb into the _sigfault union for clarity")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 cleanups from Tony Luck:
- More atomic cleanup from willy
- Fix a python script to work with version 3
- Some other small cleanups
* tag 'please-pull-ia64_misc' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities"
ia64/err-inject: Use get_user_pages_fast()
ia64: doc: tweak whitespace for 'console=' parameter
ia64: Convert remaining atomic operations
ia64: convert unwcheck.py to python3
|
|
After staring hard at sequences like
[ 28.199013] systemd-1 2..s. 26062228us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0?], tail=1 [1?]
[ 28.199095] systemd-1 2..s. 26062229us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000, active=0x1
[ 28.199177] systemd-1 2..s. 26062230us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.1, seqno=3, prio=-1024
[ 28.199258] systemd-1 2..s. 26062231us : execlists_submission_tasklet: rcs0 completed ctx=0
[ 28.199340] gem_eio-829 1..s1 26066853us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.1, seqno=1, prio=0
[ 28.199421] <idle>-0 2..s. 26066863us : execlists_submission_tasklet: rcs0 cs-irq head=1 [1?], tail=2 [2?]
[ 28.199503] <idle>-0 2..s. 26066865us : execlists_submission_tasklet: rcs0 csb[2]: status=0x00000001:0x00000000, active=0x1
[ 28.199585] gem_eio-829 1..s1 26067077us : execlists_submission_tasklet: rcs0 in[1]: ctx=3.1, seqno=2, prio=0
[ 28.199667] gem_eio-829 1..s1 26067078us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.2, seqno=1, prio=0
[ 28.199749] <idle>-0 2..s. 26067084us : execlists_submission_tasklet: rcs0 cs-irq head=2 [2?], tail=3 [3?]
[ 28.199830] <idle>-0 2..s. 26067085us : execlists_submission_tasklet: rcs0 csb[3]: status=0x00008002:0x00000001, active=0x1
[ 28.199912] <idle>-0 2..s. 26067086us : execlists_submission_tasklet: rcs0 out[0]: ctx=1.2, seqno=1, prio=0
[ 28.199994] gem_eio-829 2..s. 28246084us : execlists_submission_tasklet: rcs0 cs-irq head=3 [3?], tail=4 [4?]
[ 28.200096] gem_eio-829 2..s. 28246088us : execlists_submission_tasklet: rcs0 csb[4]: status=0x00000014:0x00000001, active=0x5
[ 28.200178] gem_eio-829 2..s. 28246089us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0, prio=0
[ 28.200260] gem_eio-829 2..s. 28246127us : execlists_submission_tasklet: execlists_submission_tasklet:886 GEM_BUG_ON(buf[2 * head + 1] != port->context_id)
the conclusion is that the only place where the ports are reset to zero,
is from engine->cancel_requests called during i915_gem_set_wedged().
The race is horrible as it results from calling set-wedged on active HW
(the GPU reset failed) and as such we need to be careful as the HW state
changes beneath us. Fortunately, it's the same scary conditions as
affect normal reset, so we can reuse the same machinery to disable state
tracking as we clobber it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104945
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Fixes: af7a8ffad9c5 ("drm/i915: Use rcu instead of stop_machine in set_wedged")
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302113324.23189-2-chris@chris-wilson.co.uk
(cherry picked from commit 963ddd63c314e9b5d9cd999873d473a93aed5380)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We're seeing on CI that some contexts don't have the programmed OA
period timer that directs the OA unit on how often to write reports.
The issue is that we're not holding the drm lock from when we edit the
context images down to when we set the exclusive_stream variable. This
leaves a window for the deferred context allocation to call
i915_oa_init_reg_state() that will not program the expected OA timer
value, because we haven't set the exclusive_stream yet.
v2: Drop need_lock from gen8_configure_all_contexts() (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755
Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.14+
(cherry picked from commit 41d3fdcd15d5ecf29cc73e8b79c2327ebb54b960)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since commit 4670d610d592 ("PCI: Move OF-related PCI functions into
PCI core"), sparc:allmodconfig fails to build with the following error.
pcie-cadence-host.c:(.text+0x4c4): undefined reference to `of_irq_parse_and_map_pci'
pcie-cadence-host.c:(.text+0x4c8): undefined reference to `of_irq_parse_and_map_pci'
of_irq_parse_and_map_pci() is now only available if OF_IRQ is enabled.
Make its declaration and its dummy function dependent on OF_IRQ to solve
the problem.
Fixes: 4670d610d592 ("PCI: Move OF-related PCI functions into PCI core")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an
issue where disable_irq did not actually disable the irq. The bug caused
our IPIs to not be disabled, which actually is the correct behavior.
With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on
CPU IRQs"), the IPIs were getting disabled going into suspend, thus
schedule_ipi() was not being called. This caused deadlocks where
schedulable task were not being scheduled and other cpus were waiting
for them to do something.
Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the
IPIs during suspend.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17385/
[jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs]
Signed-off-by: James Hogan <jhogan@kernel.org>
|
|
Trivial fix to spelling mistake in debug message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
At the point of sysfs callback, the call to gup is
done without mmap_sem (or any lock for that matter).
This is racy. As such, use the get_user_pages_fast()
alternative and safely avoid taking the lock, if possible.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
CC: Tony Luck <tony.luck@intel.com>
CC: Fenghua Yu <fenghua.yu@intel.com>
CC: linux-ia64@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
While we've only seen inlining problems with atomic_sub_return(),
the other atomic operations could have the same problem. Convert all
remaining operations to use the same solution as atomic_sub_return().
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no
longer run.
This patch convert it to the python3 syntax.
I have ran it with python2/python3 while printing values of
start/end/rlen_sum which could be impacted by this change and I see no difference.
Fixes: 94a47083522e ("scripts: change scripts to use system python instead of env")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This can happen e.g. during disk cloning.
This is an incomplete fix: it does not catch duplicate UUIDs earlier
when things are still unattached. It does not unregister the device.
Further changes to cope better with this are planned but conflict with
Coly's ongoing improvements to handling device errors. In the meantime,
one can manually stop the device after this has happened.
Attempts to attach a duplicate device result in:
[ 136.372404] loop: module loaded
[ 136.424461] bcache: register_bdev() registered backing device loop0
[ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached
My test procedure is:
dd if=/dev/sdb1 of=imgfile bs=1024 count=262144
losetup -f imgfile
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
