summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-28powerpc: Add support for early debugging via Serial 16550 consolePali Rohár
Currently powerpc early debugging contains lot of platform specific options, but does not support standard UART / serial 16550 console. Later legacy_serial.c code supports registering UART as early debug console from device tree but it is not early during booting, but rather later after machine description code finishes. So for real early debugging via UART is current code unsuitable. Add support for new early debugging option CONFIG_PPC_EARLY_DEBUG_16550 which enable Serial 16550 console on address defined by new option CONFIG_PPC_EARLY_DEBUG_16550_PHYSADDR and by stride by option CONFIG_PPC_EARLY_DEBUG_16550_STRIDE. With this change it is possible to debug powerpc machine descriptor code. For example this early debugging code can print on serial console also "No suitable machine description found" error which is done before legacy_serial.c code. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220822231501.16827-1-pali@kernel.org
2022-09-28powerpc/64/kdump: Limit kdump base to 512MBHari Bathini
Since commit e641eb03ab2b0 ("powerpc: Fix up the kdump base cap to 128M") memory for kdump kernel has been reserved at an offset of 128MB. This held up well for a long time before running into boot failure on LPARs having a lot of cores. Commit 7c5ed82b800d8 ("powerpc: Set crashkernel offset to mid of RMA region") fixed this boot failure by moving the offset to mid of RMA region. This change meant the offset is either 256MB or 512MB on LPARs as ppc64_rma_size was 512MB or 1024MB owing to commit 103a8542cb35b ("powerpc/book3s64/ radix: Fix boot failure with large amount of guest memory"). But ppc64_rma_size can be larger as well with newer f/w. So, limit crashkernel reservation offset to 512MB to avoid running into boot failures during kdump kernel boot, due to RTAS or other allocation restrictions. Also, while here, use SZ_128M instead of opening coding it. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220912065031.57416-1-hbathini@linux.ibm.com
2022-09-28powerpc: Provide syscall wrapperRohan McLure
Implement syscall wrapper as per s390, x86, arm64. When enabled cause handlers to accept parameters from a stack frame rather than from user scratch register state. This allows for user registers to be safely cleared in order to reduce caller influence on speculation within syscall routine. The wrapper is a macro that emits syscall handler symbols that call into the target handler, obtaining its parameters from a struct pt_regs on the stack. As registers are already saved to the stack prior to calling system_call_exception, it appears that this function is executed more efficiently with the new stack-pointer convention than with parameters passed by registers, avoiding the allocation of a stack frame for this method. On a 32-bit system, we see >20% performance increases on the null_syscall microbenchmark, and on a Power 8 the performance gains amortise the cost of clearing and restoring registers which is implemented at the end of this series, seeing final result of ~5.6% performance improvement on null_syscall. Syscalls are wrapped in this fashion on all platforms except for the Cell processor as this commit does not provide SPU support. This can be quickly fixed in a successive patch, but requires spu_sys_callback to allocate a pt_regs structure to satisfy the wrapped calling convention. Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmai.com> [mpe: Make incompatible with COMPAT to retain clearing of high bits of args] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-22-rmclure@linux.ibm.com
2022-09-28powerpc: Change system_call_exception calling conventionRohan McLure
Change system_call_exception arguments to pass a pointer to a stack frame container caller state, as well as the original r0, which determines the number of the syscall. This has been observed to yield improved performance to passing them by registers, circumventing the need to allocate a stack frame. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Retain clearing of high bits of args for compat tasks] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-21-rmclure@linux.ibm.com
2022-09-28powerpc: Use common syscall handler typeRohan McLure
Cause syscall handlers to be typed as follows when called indirectly throughout the kernel. This is to allow for better type checking. typedef long (*syscall_fn)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); Since both 32 and 64-bit abis allow for at least the first six machine-word length parameters to a function to be passed by registers, even handlers which admit fewer than six parameters may be viewed as having the above type. Coercing syscalls to syscall_fn requires a cast to void* to avoid -Wcast-function-type. Fixup comparisons in VDSO to avoid pointer-integer comparison. Introduce explicit cast on systems with SPUs. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-19-rmclure@linux.ibm.com
2022-09-28powerpc: Enable compile-time check for syscall handlersRohan McLure
The table of syscall handlers and registered compatibility syscall handlers has in past been produced using assembly, with function references resolved at link time. This moves link-time errors to compile-time, by rewriting systbl.S in C, and including the linux/syscalls.h, linux/compat.h and asm/syscalls.h headers for prototypes. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-18-rmclure@linux.ibm.com
2022-09-28powerpc: Include all arch-specific syscall prototypesRohan McLure
Forward declare all syscall handler prototypes where a generic prototype is not provided in either linux/syscalls.h or linux/compat.h in asm/syscalls.h. This is required for compile-time type-checking for syscall handlers, which is implemented later in this series. 32-bit compatibility syscall handlers are expressed in terms of types in ppc32.h. Expose this header globally. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use standard include guard naming for syscalls_32.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-17-rmclure@linux.ibm.com
2022-09-28powerpc: Adopt SYSCALL_DEFINE for arch-specific syscall handlersRohan McLure
Arch-specific implementations of syscall handlers are currently used over generic implementations for the following reasons: 1. Semantics unique to powerpc 2. Compatibility syscalls require 'argument padding' to comply with 64-bit argument convention in ELF32 abi. 3. Parameter types or order is different in other architectures. These syscall handlers have been defined prior to this patch series without invoking the SYSCALL_DEFINE or COMPAT_SYSCALL_DEFINE macros with custom input and output types. We remove every such direct definition in favour of the aforementioned macros. Also update syscalls.tbl in order to refer to the symbol names generated by each of these macros. Since ppc64_personality can be called by both 64 bit and 32 bit binaries through compatibility, we must generate both both compat_sys_ and sys_ symbols for this handler. As an aside: A number of architectures including arm and powerpc agree on an alternative argument order and numbering for most of these arch-specific handlers. A future patch series may allow for asm/unistd.h to signal through its defines that a generic implementation of these syscall handlers with the correct calling convention be emitted, through the __ARCH_WANT_COMPAT_SYS_... convention. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-16-rmclure@linux.ibm.com
2022-09-28powerpc: Provide do_ppc64_personality helperRohan McLure
Avoid duplication in future patch that will define the ppc64_personality syscall handler in terms of the SYSCALL_DEFINE and COMPAT_SYSCALL_DEFINE macros, by extracting the common body of ppc64_personality into a helper function. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-15-rmclure@linux.ibm.com
2022-09-28powerpc: Remove direct call to mmap2 syscall handlersRohan McLure
Syscall handlers should not be invoked internally by their symbol names, as these symbols defined by the architecture-defined SYSCALL_DEFINE macro. Move the compatibility syscall definition for mmap2 to syscalls.c, so that all mmap implementations can share a helper function. Remove 'inline' on static mmap helper. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix compat_sys_mmap2() prototype and offset handling] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-14-rmclure@linux.ibm.com
2022-09-26powerpc: Remove direct call to personality syscall handlerRohan McLure
Syscall handlers should not be invoked internally by their symbol names, as these symbols defined by the architecture-defined SYSCALL_DEFINE macro. Fortunately, in the case of ppc64_personality, its call to sys_personality can be replaced with an invocation to the equivalent ksys_personality inline helper in <linux/syscalls.h>. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-13-rmclure@linux.ibm.com
2022-09-26powerpc/32: Remove powerpc select specialisationRohan McLure
Syscall #82 has been implemented for 32-bit platforms in a unique way on powerpc systems. This hack will in effect guess whether the caller is expecting new select semantics or old select semantics. It does so via a guess, based off the first parameter. In new select, this parameter represents the length of a user-memory array of file descriptors, and in old select this is a pointer to an arguments structure. The heuristic simply interprets sufficiently large values of its first parameter as being a call to old select. The following is a discussion on how this syscall should be handled. As discussed in this thread, the existence of such a hack suggests that for whatever powerpc binaries may predate glibc, it is most likely that they would have taken use of the old select semantics. x86 and arm64 both implement this syscall with oldselect semantics. Remove the powerpc implementation, and update syscall.tbl to refer to emit a reference to sys_old_select and compat_sys_old_select for 32-bit binaries, in keeping with how other architectures support syscall #82. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/13737de5-0eb7-e881-9af0-163b0d29a1a0@csgroup.eu/ Link: https://lore.kernel.org/r/20220921065605.1051927-12-rmclure@linux.ibm.com
2022-09-26powerpc: Use generic fallocate compatibility syscallRohan McLure
The powerpc fallocate compat syscall handler is identical to the generic implementation provided by commit 59c10c52f573f ("riscv: compat: syscall: Add compat_sys_call_table implementation"), and as such can be removed in favour of the generic implementation. A future patch series will replace more architecture-defined syscall handlers with generic implementations, dependent on introducing generic implementations that are compatible with powerpc and arm's parameter reorderings. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-11-rmclure@linux.ibm.com
2022-09-26asm-generic: compat: Support BE for long long args in 32-bit ABIsRohan McLure
32-bit ABIs support passing 64-bit integers by registers via argument translation. Commit 59c10c52f573 ("riscv: compat: syscall: Add compat_sys_call_table implementation") implements the compat_arg_u64 macro for efficiently defining little endian compatibility syscalls. Architectures supporting big endianness may benefit from reciprocal argument translation, but are welcome also to implement their own. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Arnd Bergmann <arnd@anrdb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-10-rmclure@linux.ibm.com
2022-09-26powerpc: Fix fallocate and fadvise64_64 compat parameter combinationRohan McLure
As reported[1] by Arnd, the arch-specific fadvise64_64 and fallocate compatibility handlers assume parameters are passed with 32-bit big-endian ABI. This affects the assignment of odd-even parameter pairs to the high or low words of a 64-bit syscall parameter. Fix fadvise64_64 fallocate compat handlers to correctly swap upper/lower 32 bits conditioned on endianness. A future patch will replace the arch-specific compat fallocate with an asm-generic implementation. This patch is intended for ease of back-port. [1]: https://lore.kernel.org/all/be29926f-226e-48dc-871a-e29a54e80583@www.fastmail.com/ Fixes: 57f48b4b74e7 ("powerpc/compat_sys: swap hi/lo parts of 64-bit syscall args in LE mode") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-9-rmclure@linux.ibm.com
2022-09-26powerpc/64s: Fix comment on interrupt handler prologueRohan McLure
Interrupt handlers on 64s systems will often need to save register state from the interrupted process to make space for loading special purpose registers or for internal state. Fix a comment documenting a common code path macro in the beginning of interrupt handlers where r10 is saved to the PACA to afford space for the value of the CFAR. Comment is currently written as if r10-r12 are saved to PACA, but in fact only r10 is saved, with r11-r12 saved much later. The distance in code between these saves has grown over the many revisions of this macro. Fix this by signalling with a comment where r11-r12 are saved to the PACA. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reported-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-8-rmclure@linux.ibm.com
2022-09-26powerpc/64e: Clarify register saves and clears with {SAVE,ZEROIZE}_GPRSRohan McLure
The common interrupt handler prologue macro and the bad_stack trampolines include consecutive sequences of register saves, and some register clears. Neaten such instances by expanding use of the SAVE_GPRS macro and employing the ZEROIZE_GPR macro when appropriate. Also simplify an invocation of SAVE_GPRS targetting all non-volatile registers to SAVE_NVGPRS. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reported-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-7-rmclure@linux.ibm.com
2022-09-26powerpc/32: Clarify interrupt restores with REST_GPR macro in entry_32.SRohan McLure
Restoring the register state of the interrupted thread involves issuing a large number of predictable loads to the kernel stack frame. Issue the REST_GPR{,S} macros to clearly signal when this is happening, and bunch together restores at the end of the interrupt handler where the saved value is not consumed earlier in the handler code. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-6-rmclure@linux.ibm.com
2022-09-26powerpc/64s: Use {ZEROIZE,SAVE,REST}_GPRS macros in sc, scv 0 handlersRohan McLure
Use the convenience macros for saving/clearing/restoring gprs in keeping with syscall calling conventions. The plural variants of these macros can store a range of registers for concision. This works well when the user gpr value we are hoping to save is still live. In the syscall interrupt handlers, user register state is sometimes juggled between registers. Hold-off from issuing the SAVE_GPR macro for applicable neighbouring lines to highlight the delicate register save logic. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-5-rmclure@linux.ibm.com
2022-09-26powerpc: Add ZEROIZE_GPRS macros for register clearsRohan McLure
Provide register zeroing macros, following the same convention as existing register stack save/restore macros, to be used in later change to concisely zero a sequence of consecutive gprs. The resulting macros are called ZEROIZE_GPRS and ZEROIZE_NVGPRS, keeping with the naming of the accompanying restore and save macros, and usage of zeroize to describe this operation elsewhere in the kernel. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-4-rmclure@linux.ibm.com
2022-09-26powerpc: Save caller r3 prior to system_call_exceptionRohan McLure
This reverts commit 8875f47b7681 ("powerpc/syscall: Save r3 in regs->orig_r3 "). Save caller's original r3 state to the kernel stackframe before entering system_call_exception. This allows for user registers to be cleared by the time system_call_exception is entered, reducing the influence of user registers on speculation within the kernel. Prior to this commit, orig_r3 was saved at the beginning of system_call_exception. Instead, save orig_r3 while the user value is still live in r3. Also replicate this early save in 32-bit. A similar save was removed in commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") when 32-bit adopted system_call_exception. Revert its removal of orig_r3 saves. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-3-rmclure@linux.ibm.com
2022-09-26powerpc: Remove asmlinkage from syscall handler definitionsRohan McLure
The asmlinkage macro has no special meaning in powerpc, and prior to this patch is used sporadically on some syscall handler definitions. On architectures that do not define asmlinkage, it resolves to extern "C" for C++ compilers and a nop otherwise. The current invocations of asmlinkage provide far from complete support for C++ toolchains, and so the macro serves no purpose in powerpc. Remove all invocations of asmlinkage in arch/powerpc. These incidentally only occur in syscall definitions and prototypes. Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921065605.1051927-2-rmclure@linux.ibm.com
2022-09-26powerpc/irq: Refactor irq_soft_mask_{set,or}_return()Christophe Leroy
This partialy reapply commit ef5b570d3700 ("powerpc/irq: Don't open code irq_soft_mask helpers") which was reverted by commit 684c68d92e2e ("Revert "powerpc/irq: Don't open code irq_soft_mask helpers"") irq_soft_mask_set_return() and irq_soft_mask_or_return() are overset of irq_soft_mask_set(). Have them use irq_soft_mask_set() instead of duplicating it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/18473da42362ee8f07bce36b9caef8ba77d7633f.1663656054.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove impossible mmu_psize_defs[] on nohashChristophe Leroy
Today there is: if e500 or 8xx if e500 mmu_psize_defs[] = else if 8xx mmu_psize_defs[] = else mmu_psize_defs[] = endif endif The else leg is dead definition. Drop that else leg and rewrite as: if e500 mmu_psize_defs[] = endif if 8xx mmu_psize_defs[] = endif Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/030a843449f348c0b709ca5349640624f36a016f.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Cleanup idle for e500Christophe Leroy
e500 idle setup is a bit messy. e500_idle() is used for PPC32 while book3e_idle() is used for PPC64. As they are mutually exclusive, call them all e500_idle(). Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename idle_e500.c to idle_85xx.c . Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in as it's only built on PPC64. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Simplify redundant Kconfig testsChristophe Leroy
PPC_85xx implies PPC32 so no need to check PPC32 in addition. PPC64 && !PPC_BOOK3E_64 means PPC_BOOK3S_64. PPC_BOOK3E_64 implies PPC_E500. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/244cce3e603f2b79796314c0c1c46cab927b9adc.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Replace PPC_85xx || PPC_BOOKE_64 by PPC_E500Christophe Leroy
PPC_E500 is the same as PPC_85xx || PPC_BOOKE_64 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/af79696f8cb8536fb4e20c0d98a6bf159a9e371b.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_PPC_BOOK3E_MMUChristophe Leroy
CONFIG_PPC_BOOK3E_MMU is redundant with CONFIG_PPC_E500. Remove it. Also rename mmu-book3e.h to mmu-e500.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c5549cd59a131204ff94ab909cad2e2dad4ddf2f.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_PPC_FSL_BOOK3EChristophe Leroy
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Remove it. And rename five files accordingly. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Rename include guards to match new file names] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/795cb93b88c9a0279289712e674f39e3b108a1b4.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26watchdog: booke_wdt: Replace PPC_FSL_BOOK3E by PPC_E500Christophe Leroy
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Replace it so that CONFIG_PPC_FSL_BOOK3E can be removed later. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/01a9132d51d3d8d9c74576d3da4d9d1fa5a88bde.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26Documentation: Rename PPC_FSL_BOOK3E to PPC_E500Christophe Leroy
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Rename it so that CONFIG_PPC_FSL_BOOK3E can be removed later. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d3d42b395c09e66b0705fda1e51779f33e13ac38.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Change CONFIG_E500 to CONFIG_PPC_E500Christophe Leroy
It will be used outside arch/powerpc, make it clear its a powerpc configuration item. And we already have CONFIG_PPC_E500MC, so that will make it more consistent. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e63b22083c11c4300f4a82d3123a46e5fdd54fa6.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove redundant selection of E500 and E500MCChristophe Leroy
PPC_85xx and PPC_BOOK3E_64 already select E500 so no need to select it again by PPC_QEMU_E500 and CORENET_GENERIC as they depend on PPC_85xx || PPC_BOOK3E_64. PPC_BOOK3E_64 already selects E500MC so no need to select it again by PPC_QEMU_E500 if PPC64, PPC_BOOK3E_64 is the only way into PPC_QEMU_E500 with PPC64. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/44f03fa1506892fabf626dceb2f47a049908b6af.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_PPC_BOOK3EChristophe Leroy
CONFIG_PPC_BOOK3E is redundant with CONFIG_PPC_BOOK3E_64. The later is more explicit about the fact that it's a 64 bits target. Remove CONFIG_PPC_BOOK3E. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5d0891490813c19cdcfc04678f512ea68cba3e64.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Split cpu_specs[] for mpc85xx and e500mcChristophe Leroy
e500v1/v2 and e500mc are said to be mutually exclusive in Kconfig. Split e500 cpu_specs[] and then restrict the non e500mc to PPC32 which is then 85xx. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Tweak formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/553b901ea91e393df231103da4b018e9b251b0e9.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_FSL_BOOKEChristophe Leroy
PPC_85xx is PPC32 only. PPC_85xx always selects E500 and is the only PPC32 that selects E500. FSL_BOOKE is selected when E500 and PPC32 are selected. So FSL_BOOKE is redundant with PPC_85xx. Remove FSL_BOOKE. And rename four files accordingly. cpu_setup_fsl_booke.S is not renamed because it is linked to PPC_FSL_BOOK3E and not to FSL_BOOKE as suggested by its name. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/08e3e15594e66d63b9e89c5b4f9c35153913c28f.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Split cpu_specs[] out of cputable.hChristophe Leroy
cpu_specs[] is full of #ifdefs depending on the different types of CPU. CPUs are mutually exclusive, it is therefore possible to split cpu_specs[] into smaller more readable pieces. Create cpu_specs_XXX.h that will each be dedicated on one of the following mutually exclusive families: - 40x - 44x - 47x - 8xx - e500 - book3s/32 - book3s/64 In book3s/32, the block for 603 has been moved in front in order to not have two 604 blocks. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix CONFIG_47x to be CONFIG_PPC_47x, tweak some formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a44b865e0318286155273b10cdf524ab697928c1.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Move __cpu_setup() prototypes out of cputable.hChristophe Leroy
Move all prototypes out of cputable.h For that rename cpu_setup_power.h to cpu_setup.h and move all prototypes in it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Standardise cpu_spec *spec formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f45118489ee450db654db8bbcdfd8f5907337c22.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/cputable: Remove __machine_check_early_realmode_p{7/8/9} prototypesChristophe Leroy
__machine_check_early_realmode_p{7/8/9} are already in mce.h which is included. Remove them from cputable.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b77fc0f90e3a9c065324cbff549b718ccf0809f8.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/64e: Remove unnecessary #ifdef CONFIG_PPC_FSL_BOOK3EChristophe Leroy
CONFIG_PPC_BOOK3E_64 implies CONFIG_PPC_FSL_BOOK3E so no need of additional #ifdefs in files built exclusively for CONFIG_PPC_BOOK3E_64. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/df16255c13b63b0221c9be63b94a6864bed22c12.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/64e: Tie PPC_BOOK3E_64 to PPC_E500MCChristophe Leroy
The only 64-bit Book3E CPUs we support require the selection of CONFIG_PPC_E500MC. However our Kconfig allows configurating a kernel that has 64-bit Book3E support, but without CONFIG_PPC_E500MC enabled. Such a kernel would never boot, it doesn't know about any CPUs. To fix this, force CONFIG_PPC_E500MC to be selected whenever we are building a 64-bit Book3E kernel. And add a test to detect future situations where cpu_specs is empty. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ae5d8b8b3ccc346e61d2ec729767f92766273f0b.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/Kconfig: Fix non existing CONFIG_PPC_FSL_BOOKEChristophe Leroy
CONFIG_PPC_FSL_BOOKE doesn't exist. Should be CONFIG_FSL_BOOKE. Fixes: 49e3d8ea6248 ("powerpc/fsl_booke: Enable STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/828f6a64eeb51ce9abfa1d4e84c521a02fecebb8.1663606875.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: dts: turris1x.dts: Fix labels in DSA cpu port nodesPali Rohár
DSA cpu port node has to be marked with "cpu" label. So fix it for both cpu port nodes. Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220827131538.14577-1-pali@kernel.org
2022-09-26powerpc: dts: turris1x.dts: Fix NOR partitions labelsPali Rohár
Partition partition@20000 contains generic kernel image and it does not have to be used only for rescue purposes. Partition partition@1c0000 contains bootable rescue system and partition partition@340000 contains factory image/data for restoring to NAND. So change partition labels to better fit their purpose by removing possible misleading substring "rootfs" from these labels. Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220830225500.8856-1-pali@kernel.org
2022-09-26powerpc: Always select HAVE_EFFICIENT_UNALIGNED_ACCESSMichael Ellerman
Currently powerpc selects HAVE_EFFICIENT_UNALIGNED_ACCESS in all cases but one. The exception is if the kernel is being built little endian and explicitly targeted for Power7. The combination of Power7 and little endian was never commercially supported, or widely used. It was only ever possible on bare metal machines, using unofficial firmware, or in qemu guests hosted on those machines. The bare metal firmware support for Power7 was removed in 2019, see skiboot commit 16b7ae64 ("Remove POWER7 and POWER7+ support"). Little endian kernel builds were switched to target Power8 or later in 2018, in commit a73657ea19ae ("powerpc/64: Add GENERIC_CPU support for little endian"). Since then it's only been possible to boot a Power7/LE kernel by explicitly building for Power7. So drop the exception and always select HAVE_EFFICIENT_UNALIGNED_ACCESS. If anyone does still have a Power7/LE machine it should hopefully continue to boot, just with some performance penality, and if not they can report a bug. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220916131523.319123-1-mpe@ellerman.id.au
2022-09-26powerpc/highmem: Properly handle fragmented memoryChristophe Leroy
In addition to checking whether a page is reserved before allocating it to highmem, verify that it is valid memory. Otherwise the kernel Oopses as below: mem auto-init: stack:off, heap alloc:off, heap free:off Kernel attempted to read user page (7df58) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on read at 0x0007df58 Faulting instruction address: 0xc01c8348 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=2 P2020RDB-PC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc2-0caacb197b677410bdac81bc34f05235+ #121 NIP: c01c8348 LR: c01cb2bc CTR: 0000000a REGS: c10d7e20 TRAP: 0300 Not tainted (6.0.0-rc2-0caacb197b677410bdac81bc34f05235+) MSR: 00021000 <CE,ME> CR: 48044224 XER: 00000000 DEAR: 0007df58 ESR: 00000000 GPR00: c01cb294 c10d7f10 c1045340 00000001 00000004 c112bcc0 00000015 eedf1000 GPR08: 00000003 0007df58 00000000 f0000000 28044228 00000200 00000000 00000000 GPR16: 00000000 00000000 00000000 0275cb7a c0000000 00000001 0000075f 00000000 GPR24: c1031004 00000000 00000000 00000001 c10f0000 eedf1000 00080000 00080000 NIP free_unref_page_prepare.part.93+0x48/0x60 LR free_unref_page+0x84/0x4b8 Call Trace: 0xeedf1000 (unreliable) free_unref_page+0x5c/0x4b8 mem_init+0xd0/0x194 start_kernel+0x4c0/0x6d0 set_ivor+0x13c/0x178 Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: b0e0d68b1c52 ("powerpc/32: Allow fragmented physical memory") Tested-by: Pali Rohár <pali@kernel.org> [mpe: Trim oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f08cca5c46d67399c53262eca48e015dcf1841f9.1663695394.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/prom_init: drop PROM_BUG()David Hildenbrand
Unused, let's drop it. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220920122302.99195-3-david@redhat.com
2022-09-26powerpc/mm: Make PAGE_KERNEL_xxx macros grep-friendlyChristophe Leroy
Avoid multi-lines to help getting a complete view when using grep. They still remain under the 100 chars limit. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3bc3f5a51949ee7f52dba36677db23d4337c7995.1662544980.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/mm: Reduce redundancy in pgtable.hChristophe Leroy
PAGE_KERNEL_TEXT, PAGE_KERNEL_EXEC and PAGE_AGP are the same for all powerpcs. Remove duplicated definitions. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/92254499430d13d99e4a4d7e9ad8e8284cb35380.1662544974.git.christophe.leroy@csgroup.eu
2022-09-26powerpc/book3s: Inline first level of update_mmu_cache()Christophe Leroy
update_mmu_cache() voids when hash page tables are not used. On PPC32 that means when MMU_FTR_HPTE_TABLE is not defined. On PPC64 that means when RADIX is enabled. Rename core part of update_mmu_cache() as __update_mmu_cache() and include the initial verification in an inlined caller. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bea5ad0de7f83eff256116816d46c84fa0a444de.1662370698.git.christophe.leroy@csgroup.eu
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 20:20:30 +0000