summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-17arm64: dts: imx93: add lpspi nodesPeng Fan
Add i.MX93 lpspi nodes Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx93: add lpi2c nodesPeng Fan
Add i.MX93 lpi2c nodes Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx93: add a55 pmuPeng Fan
Add A55 PMU node for perf usage Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx93: add blk ctrl nodePeng Fan
Add i.MX93 BLK CTRL MIX node Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx93: add s4 mu nodePeng Fan
Add s4 mu node for sentinel communication Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx93: add gpio clkPeng Fan
Add the GPIO clk, otherwise GPIO may not work if clk driver disable the GPIO clk during kernel boot. Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx93: correct SDHC clk entryPeng Fan
DUMMY clk only works with clk_ignore_unused and bootloader enables those clks that required for SDHC work properly. Correct SDHC clk entry with real clk. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: tqma8mpql: add USB DR supportAlexander Stein
Add support for USB DR on USB1 interface. Host/Device detection is done using the usb-role-switch connector. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: verdin-imx8mm: introduce hdmi-connectorPhilippe Schenker
The Lontium LT8912B driver needs a HDMI connector to be connected to port 1. Introduce this connector to be enabled in a device tree overlay. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: verdin-imx8mm: add lvds panel nodeMarcel Ziswiler
Add an LVDS panel node to be extended by a device tree overlay. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: verdin-imx8mm: rename sn65dsi83 to sn65dsi84Marcel Ziswiler
Rename sn65dsi83 to sn65dsi84 as that is the exact chip used on the Verdin DSI to LVDS Adapter. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp: increase the clock speed of LPSPIClark Wang
LPSPI transfer max speed is half of the root clock. Increase the root clock speed to support faster data transmission. And update the parent clock of all i2c/spi with IMX8ULP_CLK_FROSC_DIV2 which could produce accurate clock for i2c/spi usage. Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp: add mailbox nodePeng Fan
Add Sentinel Message Unit(MU), Generic MU nodes. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp: add pmu nodePeng Fan
Add i.MX8ULP pmu node Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp: correct the scmi sram node namePeng Fan
Follow sram/sram.yaml to update the sram node name. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp: drop undocumented property in cgcPeng Fan
The clocks and clocks-names are not documented in binding doc, and the clk-imx8ulp driver not use the undocumented property, so drop them. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mq-librem5: fix mipi_csi descriptionMartin Kepplinger
Properties are not documented so lead to the following error: '#address-cells', '#size-cells', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' Fix this by removing unneeded properties. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mq-librem5: add usb-role-switch property to dwc3Angus Ainslie
In order to enable (PD and data) role switching on the Librem 5 phone, add the usb-role-switch property to imx8mq's dwc3 node. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mq-librem5: add USB type-c properties for role switchingAngus Ainslie
Add the connector properties to the USB type-c stanza to enable (PD) role-switching on the Librem 5 phone. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supplySebastian Krzyszkowiak
This allows the userspace to notice that there's not enough current provided to charge the battery, and also fixes issues with 0% SOC values being considered invalid. Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mq-librem5: add RGB pwm notification ledsGuido Günther
Describe the RGB notification leds on the Librem 5 phone. Use the common defines so we're sure to adhere to the common patterns, use predefined led colors and functions so we're being warned in case of deprecations. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mq-librem5: describe the voice coil motor for focus controlMartin Kepplinger
Describe the focus motor that will be used for the rear camera - even though the rear camera sensor driver is not yet in the mainline. The focus motor is a separate device and can be controlled already. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: ls1028a: enable swp5 and eno3 for all boardsVladimir Oltean
In order for the LS1028A based boards to benefit from support for multiple CPU ports, the second DSA master and its associated CPU port must be enabled in the device trees. This does not change the default CPU port from the current port 4. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: ls1028a: mark enetc port 3 as a DSA master tooVladimir Oltean
The LS1028A switch has 2 internal links to the ENETC controller. With DSA's ability to support multiple CPU ports, we should mark both ENETC ports as DSA masters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: ls1028a: move DSA CPU port property to the common SoC dtsiVladimir Oltean
Since the CPU port 4 of the switch is hardwired inside the SoC to go to the enetc port 2, this shouldn't be something that the board files need to set (but whether that CPU port is used or not is another discussion). So move the DSA "ethernet" property to the common dtsi. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp-evk: Add PCIe supportRichard Zhu
Add PCIe support on i.MX8MP EVK board. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: Add iMX8MP PCIe supportRichard Zhu
Add i.MX8MP PCIe support. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp: no executable source file permissionMarcel Ziswiler
This fixes the following error: arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h: error: do not set execute permissions for source files Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: Add SNVS LPGPRMarek Vasut
Add SNVS LPGPR bindings to MX8M Plus, the LPGPR is used to store e.g. boot counter. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp-msc-sm2s: Add device trees for MSC SM2S-IMX8PLUS SoM and ↵Martyn Welch
carrier board Add device trees for one of a number of MSC's (parent company, Avnet) variants of the SM2S-IMX8PLUS system on module along with the compatible SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of SoMs use the NXP i.MX8MP SoC and provide the SMARC module interface. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm: Fix typo in license text for Engicam boardsJagan Teki
Fix the Amarula Solutions typo mistake in license text for Engicam i.MX8M boards add in below commits. commit <60ac35268f85b> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM") commit <aec8ad34f7f24> ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit") commit <eefe06b295087> ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus SoM") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8-ss-dma: add IPG clock for i2cPeng Fan
i.MX8 LPI2C requires both PER and IPG clock, so add the missed IPG clk. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-SFrieder Schrempf
This adds support for the Kontron Electronics SL i.MX8MM OSM-S SoM and the matching baseboard BL i.MX8MM OSM-S. The SoM hardware complies to the Open Standard Module (OSM) 1.0 specification, size S (https://sget.org/standards/osm). Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-kontron: Add SPI NOR partition layoutFrieder Schrempf
This is the layout used by the bootloader. Add it to the kernel devicetree to make the same layout available in Linux and have the devicetrees synced. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC ↵Frieder Schrempf
regulator-names Improve the naming of the regulators to contain the voltage rail names from the schematic. Suggested-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-kontron: Remove low DDRC operating pointFrieder Schrempf
For some reason there is a problem with finding a DDR configuration that works on all operating points and all LPDDR4 types used on the SoM. Therefore the bootloader currently doesn't configure the lowest of the three operating points. Let's also skip this in the kernel devicetree to make sure it isn't used. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltageFrieder Schrempf
It turns out that it is not necessary to declare the VSELECT signal as GPIO and let the PMIC driver set it to a fixed high level. This switches the voltage between 3.3V and 1.8V by setting the PMIC register for LDO5 accordingly. Instead we can do it like other boards already do and simply mux the VSELECT signal of the USDHC interface to the pin. This makes sure that the correct voltage is selected by setting the PMIC's SD_VSEL input to high or low accordingly. Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-kontron: Adjust compatibles, file names and model stringsFrieder Schrempf
The official naming includes "SL" (SoM-Line) or "BL" (Board-Line). By updating we make sure, that we can maintain this more easily in future and make sure that the proper devicetree can be selected for the hardware. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: add VPU blk ctrl nodePeng Fan
Add i.MX8MP VPU blk ctrl node Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: add vpu pgc nodesPeng Fan
Add i.MX8MP PGC nodes for vpu, which are used to supply power for VPU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp-verdin: add cpu-supplyMax Krummenacher
Add the cpu-supply property to all CPU nodes to enable the cpufreq driver. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-venice-gw7903: add digital I/O ctl gpiosTim Harvey
The GW7903-C revision introduced two additional GPIO's for controlling the digital I/O direction. Add them. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm/n-venice-gw7902: Remove invalid propertyFabio Estevam
The 'oscillator-frequency' property is not documented and it is not used anywhere. Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: Add SoM compatible to i.MX8M Plus DHCOM PDK2Marek Vasut
Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2Marek Vasut
This PHY is not used on PDK2, the header was added due to copy-paste error, drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp: Add HW variant details to i.MX8M Plus DHCOM PDK2Marek Vasut
Add information about which exact SoM variant is used on which PDK2 variant. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: mnt-reform2: don't use multiple blank linesMarcel Ziswiler
Avoid the following checkpatch warning: arch/arm/boot/dts/imx8mq-mnt-reform2.dts:213: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mp-verdin: don't use multiple blank linesMarcel Ziswiler
Avoid the following checkpatch warning: arch/arm/boot/dts/imx8mp-verdin.dtsi:281: check: Please don't use multiple blank lines Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8mm-venice-gw72xx-0x: blank line at end of fileMarcel Ziswiler
Avoid the following checkpatch warning: Found possible blank line(s) at end of file 'arch/arm/boot/dts/imx8mm-venice-gw72xx-0x.dts' Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-17arm64: dts: imx8ulp-evk: Add the fec supportWei Fang
Enable the fec on i.MX8ULP EVK board. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:10:46 +0000