summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-19ath9k: Add recovery mechanism for hw TSF timerFelix Fietkau
Configure the TSF based hardware timer for a channel switch. Also set up backup software timer, in case the gen timer fails. This could be caused by a hardware reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Update channel switch timerFelix Fietkau
TSF time might have been updated by the incoming beacon, need update the channel switch timer to reflect the change. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Handle beacon miss on multi channel contextFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add periodic NoA supportFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add multi-channel scheduling supportFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement mgd_prepare_txFelix Fietkau
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Adjust AP beacon tsf based on station contextFelix Fietkau
In multi channel context (AP + STA case), adjust the TSF time of the AP chanctx to keep its beacons at half beacon interval offset relative to the STA chanctx. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: switch channel after sending beaconFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add p2p go NoA attributeFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Store current offchannel durationRajkumar Manoharan
Update current offchannel duration during scan or roc request. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: switch channel context for beaconingFelix Fietkau
Add a basic state machine for switch channel context for beacon transmission. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Summarize hw state per channel contextRajkumar Manoharan
Group and set hw state (opmode, primary_sta, beacon conf) per channel context instead of whole list of vifs. This would allow each channel context to run in different mode (STA/AP). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move beacon config to channel contextRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: save tsf in channel contextFelix Fietkau
Save TSF in channel context for multiple operating channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add ATH_OP_MULTI_CHANNELFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move caldata into channel contextFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Fetch appropriate operating channel contextRajkumar Manoharan
Retrieve appropriate operating channel context while switching between operating and off channels. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement channel context opsFelix Fietkau
Add channel context operations (add, remove, change, assign and unassign) to enable support for multiple channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement remain-on-channal supportFelix Fietkau
Add remain on channel support in order to enable multi-channel concurrency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement hw_scan supportFelix Fietkau
Implement hw_scan support for enabling multi-channel cuncurrency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: send powersave frame on channel switchFelix Fietkau
While leaving from or entering to active channel context, send out nullfunc frame to inform to the AP about the presence of station. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: channel context based transmissionFelix Fietkau
Force queueing of all frames that belong to a virtual interface on a different channel context, to ensure that they are sent on the correct channel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add channel context worker threadFelix Fietkau
The channel context worker is used to switch to next requested channel context. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move acq to channel contextFelix Fietkau
Add support to maintain per-channel ACs list. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move txpower limit to channel contextFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add channel context structureFelix Fietkau
The channel context structure is defined to enable multi-channel concurrency support. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rtlwifi: btcoexist: avoid format string in printkKees Cook
Since CL_PRINTF only ever takes a single argument, make sure a format string cannot leak into printk. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rsi_91x_sdio: add error handling into rsi_module_init()Alexey Khoroshilov
Fix rsi_module_init() to propagate sdio_register_driver() errors. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rsi: Use module_usb_driverAlexey Khoroshilov
module_usb_driver eliminates the boilerplate and makes the code simpler, in addition to the fact currently rsi_module_init() ignores usb_deregister() error. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19mwifiex: wowlan: do not disconnect on suspendBing Zhao
For users who do not need wowlan, load mwifiex.ko with disconnect_on_suspend = 1; or iw phy0 wowlan disable. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19mwifiex: support wowlan magic-packet encapsulated as UDP packetZhiyuan Yang
When magic-packet is generated as a UDP packet the offset should be 20+8 more bytes to cover IPv4 header and UDP header. So the total offset become 56. Add a new MEF entry to support both magic-packet patterns generated by different tools. Cc: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Zhiyuan Yang <yangzy@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19bcma: gpio: register all 32 GPIOs on BCM53572Rafał Miłecki
I've here a device detected as: bcma: bus0: Found chip with id 0xD144, rev 0x01 and package 0x08 I couldn't find GPIO handling hw button until trying GPIO 20. It seems BCM53572 also has 32 GPIOs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: do not initialize BCN_OFFSET registersStanislaw Gruszka
We setup BCN_OFFSET{0,1} registers dynamically, don't have to initialize them. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change order when stop beaconingStanislaw Gruszka
When no beaconing is needed, first stop beacon queue (disable beaconing globally) to avoid possible sending of not prepared beacon on short period after clearing beacon and before stop of BCN queue. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change default MAC_BSSID_DW1_BSS_BCN_NUMStanislaw Gruszka
We setup MAC_BSSID_DW1_BSS_BCN_NUM dynamically when numbers of active beacons increase. Change default to 0 to tell hardware that we want to send only one beacon as default. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change beaconing setup on RT2800Stanislaw Gruszka
As reported by Matthias, on 5572 chip, even if we clear up TXWI of corresponding beacon, hardware still try to send it or do other action that increase power consumption peak up to 1A. To avoid the issue, setup beaconing dynamically by configuring offsets of currently active beacons and MAC_BSSID_DW1_BSS_BCN_NUM variable, which limit number of beacons that hardware will try to send. Reported-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rt2x00: change beaconing lockingStanislaw Gruszka
This patch is needed for further changes to keep global variables consistent when changing beaconing on diffrent vif's. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19mwifiex: Remove custom world regulatory domainMarkus Pargmann
A custom regulatory domain was introduced in this commit: cc0ba0d mwifiex: support custom world regulatory domain The commit description says that it was introduced because the world regulatory domain does not include channels 52-64 and 100-140. These channels are described in the world regulatory domain now, so we can drop this custom regulatory domain. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19net: wireless: rtlwifi: rtl8192de: phy.c: Cleaning up uninitialized variableRickard Strandqvist
There is a risk that the variables will be used without being initialized. Have also moved variable to the part of the code where it is used. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19net: wireless: rt2x00: rt2x00mac.c: Cleaning up uninitialized variablesRickard Strandqvist
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19net: wireless: libertas: cmd.c: Cleaning up uninitialized variablesRickard Strandqvist
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop channel_type (we can get this info from chandef)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop is_40mhz (get width info from chandef)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop own channel_freq (get it from chandef when needed)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: store current channel using struct cfg80211_chan_defRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: set channel info before switching bandRafał Miłecki
Band switching code needs to know what channel we switch to. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: don't force default channel during initRafał Miłecki
PHY may need to be re-initialized during runtime (e.g. on band switch). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: use IEEE80211_CONF_CHANGE_CHANNELRafał Miłecki
This is tiny optimization and grouping band/channel ops. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: drop check for core changeRafał Miłecki
There aren't devices with multiple 802.11 cores supported by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: drop B43_DEFAULT_CHANNELRafał Miłecki
It was never used, b43_switch_channel is always called with hw_value (from mac80211) or whatever get_default_chan returns. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 11:42:57 +0000