summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-24iwlwifi: mvm: BT Coex - allow to force the antenna allocationEmmanuel Grumbach
This can be used for testing. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: assure no overflows occur while reading otpLiad Kaufman
Just in case sizes change in the OTP without proper SW updating, an additional check is inserted when reading OTP sections to assure no overflows occur. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: nvm: update maximal parsed values in external nvmLiad Kaufman
Some of the maximum values of the parsed external NVM file in the B-step of the 8000 HW family were updated, so this updates these values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: update trans->hw_rev 8000 hw family formatLiad Kaufman
The format of the CSR_HW_REV register has changed in 8000 HW family. To keep backwards compatibility, we store the value of this register as usual in trans->hw_rev, only we store it in the old format in this variable. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fix bug in set_hw_address functionEran Harary
Don't use nvm_hw pointer if it is NULL. Print an error message if the MAC address isn't valid. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: dvm: add a force_cam module parameter to fully disable power savingAndy Lutomirski
iwldvm stalls are often blamed on power management. Add an option to force it all the way off. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: improve debugfs queue infoAndy Lutomirski
This adds need_update and write_actual to rx_queue and need_update and an HCMD indicator to tx_queue. On my card, rx_queue now looks like: read: 181 write: 180 write_actual: 176 need_update: 0 free_count: 40 closed_rb_num: 181 tx_queue now looks like: hwq 00: read=29 write=30 use=1 stop=0 need_update=0 hwq 01: read=0 write=0 use=1 stop=0 need_update=0 hwq 02: read=128 write=128 use=1 stop=0 need_update=0 hwq 03: read=0 write=0 use=1 stop=0 need_update=0 hwq 04: read=94 write=94 use=1 stop=0 need_update=0 HCMD hwq 05: read=0 write=0 use=0 stop=0 need_update=0 hwq 06: read=0 write=0 use=0 stop=0 need_update=0 hwq 07: read=0 write=0 use=0 stop=0 need_update=0 hwq 08: read=0 write=0 use=0 stop=0 need_update=0 hwq 09: read=0 write=0 use=0 stop=0 need_update=0 hwq 10: read=0 write=0 use=0 stop=0 need_update=0 hwq 11: read=0 write=0 use=0 stop=0 need_update=0 hwq 12: read=0 write=0 use=0 stop=0 need_update=0 hwq 13: read=0 write=0 use=0 stop=0 need_update=0 hwq 14: read=0 write=0 use=0 stop=0 need_update=0 hwq 15: read=0 write=0 use=0 stop=0 need_update=0 hwq 16: read=0 write=0 use=0 stop=0 need_update=0 hwq 17: read=0 write=0 use=0 stop=0 need_update=0 hwq 18: read=0 write=0 use=0 stop=0 need_update=0 hwq 19: read=0 write=0 use=0 stop=0 need_update=0 This may help with debugging queue stalls. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: log when waking the NIC for hcmd submission failsAndy Lutomirski
I've never seen this happen, but it's useful to rule it out. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: fix NVM channel attribute map.David Spinadel
Fix NVM channel attributes. Add indoor-only and GO Concurrent bits. Remove DFS channel bit which is overlapped with radar. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fixes for 8000 NVM flowEran Harary
The nvm_file should be loaded by default for SDIO procucts only. Change the configuration accordingly. While at it, fix a typo in the device name. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: add firmware monitor capabilitiesEmmanuel Grumbach
This allows to use the firmware monitor. This capability uses a lot of contiguous memory (up to 64MB), so make its usage module parameter dependent. The driver will try to allocate as much contiguous memory as possible downgrading its requirements until the allocation succeeds. Dump this data into the fw-error dump file when an error happens. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: rename iwl_mvm_fw_error_next_dataEmmanuel Grumbach
This is not related to mvm. Rename to iwl_fw_error_next_data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: add device / firmware to fw-error-dump fileEmmanuel Grumbach
This can be useful later for parsing since the parsing may differ based on the device's family / bus. Also add the human readable version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: remove MCS32 support declarationEliad Peller
MCS32 is currently not supported, so don't declare support for it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: don't use hardcoded num of scan channelsDavid Spinadel
Use num of scan channels as advertised by fw TLV. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: update the 7265 series HW IDsOren Givon
Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. CC: <stable@vger.kernel.org> [3.13+] Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
2014-06-24iwlwifi: mvm: add back support for low-priority scanJohannes Berg
The low-priority scan feature can be useful, e.g. for OBSS scans (if those are required by the AP); add back support for it, restoring the maximum out time to the value it was for low-priority scan before that was removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: use ksize to memset scan_commandDavid Spinadel
Use ksize to get scan command size instead of calculating it, to avoid nasty bugs. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: bump API version for 8000 devicesEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: rework sched scan channel configurationEliad Peller
The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-23mac80211: protect TDLS discovery sessionArik Nemtsov
After sending a TDLS discovery-request, we expect a reply to arrive on the AP's channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS setup-response is a direct packet not buffered by the AP. Add a new mac80211 driver callback to allow discovery session protection. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: make sure TDLS peer STA exists during setupArik Nemtsov
Make sure userspace added a TDLS peer station before invoking the transmission of the first setup frame. This ensures packets to the peer won't go through the AP path. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add API to request TDLS operation from userspaceArik Nemtsov
Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: implement proper Tx path flushing for TDLSArik Nemtsov
As the spec mandates, flush data in the AP path before transmitting the first setup frame. Data packets transmitted during setup are already dropped in the Tx path. For the teardown flow, flush all packets in the direct path before transmitting the teardown frame. Un-authorize the peer sta after teardown is sent, forcing all subsequent Tx to the peer through the AP. Make sure to flush the queues when disabling the link to get the teardown packet out. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> [adjust to Luca's new quuee API and stop only vif queues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: split tdls_mgmt functionArik Nemtsov
There are setup/teardown specific actions to be done that accompany the sending of a TDLS management packet. Split the main function to simplify future additions. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: use TDLS initiator in tdls_mgmt operationsArik Nemtsov
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Use the value from userspace in order to have a correct teardown packet. With the current code, a teardown from the responder side fails the TDLS MIC check because of a bad link identifier IE. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: pass TDLS initiator in tdls_mgmt operationsArik Nemtsov
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: cleanup TDLS state during failed setupArik Nemtsov
When setting up a TDLS session, register a delayed work to remove the peer if setup times out. Prevent concurrent setups to support this capacity. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: set auth flags after other station infoArik Nemtsov
For TDLS, the AUTHORIZED flag arrives with all other important station info (supported rates, HT/VHT caps, ...). Make sure to set the station state in the low-level driver after transferring this information to the mac80211 STA entry. This aligns the STA information during sta_state callbacks with the non-TDLS case. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: clarify TDLS Tx handlingArik Nemtsov
Rename the flags used in the Tx path and add an explanation for the reasons to drop, send directly or through the AP. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: stop only the queues assigned to the vif during channel switchLuciano Coelho
Instead of stopping all the hardware queues during channel switch, which is especially bad when we have large CSA counts, stop only the queues that are assigned to the vif that is performing the channel switch. Additionally, check for (sdata->csa_block_tx) instead of calling ieee80211_csa_needs_block_tx(), which can now be removed. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add functions to stop and wake all queues assigned to a vifLuciano Coelho
In some cases we may want to stop the queues of a single vif (for instance during a channel-switch). Add a function that stops all the queues that are assigned to a vif. If a queue is assigned to more than one vif, the corresponding netdev subqueue of the other vif(s) will also be stopped. If the HW doesn't set the IEEE80211_HW_QUEUE_CONTROL flag, then all queues are stopped. Also add a corresponding function to wake the queues of a vif back. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: introduce refcount for queue_stop_reasonsLuciano Coelho
Sometimes different vifs may be stopping the queues for the same reason (e.g. when several interfaces are performing a channel switch). Instead of using a bitmask for the reasons, use an integer that holds a refcount instead. In order to keep it backwards compatible, introduce a boolean in some functions that tell us whether the queue stopping should be refcounted or not. For now, use not refcounted for all calls to keep it functionally the same as before. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: don't stop all queues when flushingLuciano Coelho
There is no need to stop all queues when we want to flush specific queues, so stop only the queues that will be flushed. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23net: Mac80211: Remove silly timespec danceThomas Gleixner
Converting time from one format to another seems to give coders a warm and fuzzy feeling. Use the proper interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John W. Linville <linville@tuxdriver.com> [fix compile error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211_hwsim: clean up own address matchingJohannes Berg
Using perm_addr is always wrong, it may be reassigned by anyone using standard netdev APIs. Remove that from the match function and also use the match function where only the perm_addr was used now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: Use ktime_get_ts()Thomas Gleixner
do_posix_clock_monotonic_gettime() is a leftover from the initial posix timer implementation which maps to ktime_get_ts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: use csa counter offsets instead of csa_activeMichal Kazior
vif->csa_active is protected by mutexes only. This means it is unreliable to depend on it on codeflow in non-sleepable beacon and CSA code. There was no guarantee to have vif->csa_active update be visible before beacons are updated on SMP systems. Using csa counter offsets which are embedded in beacon struct (and thus are protected with single RCU assignment) is much safer. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: move csa counters from sdata to beacon/prespMichal Kazior
Having csa counters part of beacon and probe_resp structures makes it easier to get rid of possible races between setting a beacon and updating counters on SMP systems by guaranteeing counters are always consistent against given beacon struct. While at it relax WARN_ON into WARN_ON_ONCE to prevent spamming logs and racing. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [remove pointless array check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: allow tx via monitor iface when DFSJanusz Dziedzic
Allow send frames using monitor interface when DFS chandef and we pass CAC (beaconing allowed). This fix problem when old kernel and new backports used, in such case hostapd create/use also monitor interface. Before this patch all frames hostapd send using monitor iface were dropped when AP was configured on DFS channel. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: make ethtool the driver's responsibilityJohannes Berg
Currently, cfg80211 tries to implement ethtool, but that doesn't really scale well, with all the different operations. Make the lower-level driver responsible for it, which currently only has an effect on mac80211. It will similarly not scale well at that level though, since mac80211 also has many drivers. To cleanly implement this in mac80211, introduce a new file and move some code to appropriate places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: remove weak WEP IV accountingJohannes Berg
Since WEP is practically dead, there seems very little point in keeping WEP weak IV accounting. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23trivial: net/mac80211/mesh.c: fix typo s/Substract/Subtract/Antonio Ospite
Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: Luis Carlos Cobo <luisca@cozybit.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: remove ignore_plink_timer flagBob Copeland
The mesh_plink code is doing some interesting things with the ignore_plink_timer flag. It seems the original intent was to handle this race: cpu 0 cpu 1 ----- ----- start timer handler for state X acquire sta_lock change state from X to Y mod_timer() / del_timer() release sta_lock acquire sta_lock execute state Y timer too soon However, using the mod_timer()/del_timer() return values to detect these cases is broken. As a result, timers get ignored unnecessarily, and stations can get stuck in the peering state machine. Instead, we can detect the case by looking at the timer expiration. In the case of del_timer, just ignore the timers in the following (LISTEN/ESTAB) states since they won't have timers anyway. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: fix station/driver powersave raceJohannes Berg
It is currently possible to have a race due to the station PS unblock work like this: * station goes to sleep with frames buffered in the driver * driver blocks wakeup * station wakes up again * driver flushes/returns frames, and unblocks, which schedules the unblock work * unblock work starts to run, and checks that the station is awake (i.e. that the WLAN_STA_PS_STA flag isn't set) * we process a received frame with PM=1, setting the flag again * ieee80211_sta_ps_deliver_wakeup() runs, delivering all frames to the driver, and then clearing the WLAN_STA_PS_DRIVER and WLAN_STA_PS_STA flags In this scenario, mac80211 will think that the station is awake, while it really is asleep, and any TX'ed frames should be filtered by the device (it will know that the station is sleeping) but then passed to mac80211 again, which will not buffer it either as it thinks the station is awake, and eventually the packets will be dropped. Fix this by moving the clearing of the flags to exactly where we learn about the situation. This creates a problem of reordering, so introduce another flag indicating that delivery is being done, this new flag also queues frames and is cleared only while the spinlock is held (which the queuing code also holds) so that any concurrent delivery/TX is handled correctly. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: remove PID rate controlJohn W. Linville
Minstrel has long since proven its worth. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-20ath9k: Fix build error in ath_reset_internalRajkumar Manoharan
drivers/net/wireless/ath/ath9k/main.c:299 ath_reset_internal() error: we previously assumed 'hchan' could be null (see line 293) Cc: Felix Fietkau <nbd@openwrt.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: add config for (en|dis)abling G-PHY supportRafał Miłecki
This allows new devices users to save some space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: remove leftover code from old devices supportRafał Miłecki
Old devices (A-PHY or B-PHY) are supposed to be supported by b43legacy. We keep phy_a.c as it's needed for G-PHY which shares some design. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:52:47 +0000