| Age | Commit message (Collapse) | Author |
|---|
|
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything
when it fails.
Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init()
but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in
case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak.
Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the
error path.
Note that we can remove the fib6_nh_release() call in nh_create_ipv6()
later in net-next.git.
Fixes: 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-03-14
this is a pull request of 6 patches for net/main.
The first patch is by Vincent Mailhol and fixes an out of bound read
in strscpy() in the ucan driver.
Oliver Hartkopp contributes a patch for the af_can statistics to use
atomic access in the hot path.
The next 2 patches are by Biju Das, target the rcar_canfd driver and
fix the page entries in the AFL list.
The 2 patches by Haibo Chen for the flexcan driver fix the suspend and
resume functions.
linux-can-fixes-for-6.14-20250314
* tag 'linux-can-fixes-for-6.14-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: flexcan: disable transceiver during system PM
can: flexcan: only change CAN state when link up in system PM
can: rcar_canfd: Fix page entries in the AFL list
dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties for R-Car V4M
can: statistics: use atomic access in hot path
can: ucan: fix out of bound read in strscpy() source
====================
Link: https://patch.msgid.link/20250314130909.2890541-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When updating the source/destination address, the TCP/UDP checksum needs to
be updated as well.
Fixes: bee88cd5bd83 ("net: add support for segmenting TCP fraglist GSO packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20250311212530.91519-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to GDMA protocol, holes (zeros) are allowed at the beginning
or middle of the gdma_list_devices_resp message. The existing code
cannot properly handle this, and may miss some devices in the list.
To fix, scan the entire list until the num_of_devs are found, or until
the end of the list.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Registering the interrupts for TX or RX DMA Channels prior to registering
their respective NAPI callbacks can result in a NULL pointer dereference.
This is seen in practice as a random occurrence since it depends on the
randomness associated with the generation of traffic by Linux and the
reception of traffic from the wire.
Fixes: 681eb2beb3ef ("net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Co-developed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250311154259.102865-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
the ATI AHCI controllers specified board type 'board_ahci' rather than
board type 'board_ahci'. This means that LPM was historically not enabled
for the ATI AHCI controllers.
By looking at commit 7a8526a5cd51 ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI
for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason,
that Samsung SSDs do not play nice with ATI AHCI controllers. (When using
other AHCI controllers, NCQ can be enabled on these Samsung SSDs without
issues.)
In a similar way, from user reports, it is clear the ATI AHCI controllers
can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM
on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected
by the ATI AHCI controller even after a COMRESET.)
Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g.
Intel AHCI controllers, these Samsung drives appear to work perfectly fine.
Considering that the combination of ATI + Samsung, for some unknown reason,
does not seem to work well, disable LPM when detecting an ATI AHCI
controller with a problematic Samsung SSD.
Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have
already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Eric <eric.4.debian@grabatoulnz.fr>
Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/
Tested-by: Eric <eric.4.debian@grabatoulnz.fr>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$nm vmlinux | grep ' _R'.*SeqFile | rustfilt
ffff8000805b78ac T <kernel::seq_file::SeqFile>::call_printf
This Rust symbol is trivial wrappers around the C functions seq_printf.
It doesn't make sense to go through a trivial wrapper for its functions,
so mark it inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317030418.2371265-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$ nm vmlinux | grep ' _R'.*FileDescriptorReservation | rustfilt
... T <kernel::fs::file::FileDescriptorReservation>::fd_install
... T <kernel::fs::file::FileDescriptorReservation>::get_unused_fd_flags
... T <kernel::fs::file::FileDescriptorReservation as core::ops::drop::Drop>::drop
These Rust symbols are trivial wrappers around the C functions
fd_install, put_unused_fd and put_task_struct. It
doesn't make sense to go through a trivial wrapper for these
functions, so mark them inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317023702.2360726-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
LSMs often inspect the path.mnt of files in the security hooks, and this
causes a NULL deref in efivarfs_pm_notify() because the path is
constructed with a NULL path.mnt.
Fix by obtaining from vfs_kern_mount() instead, and being very careful
to ensure that deactivate_super() (potentially triggered by a racing
userspace umount) is not called directly from the notifier, because it
would deadlock when efivarfs_kill_sb() tried to unregister the notifier
chain.
[ Al notes:
Umm... That's probably safe, but not as a long-term solution -
it's too intimately dependent upon fs/super.c internals. The
reasons why you can't run into ->s_umount deadlock here are
non-trivial... ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/r/e54e6a2f-1178-4980-b771-4d9bafc2aa47@tnxip.de
Link: https://lore.kernel.org/r/3e998bf87638a442cbc6864cdcd3d8d9e08ce3e3.camel@HansenPartnership.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes. 7 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
13 are for MM and the other two are for squashfs and procfs.
All are singletons. Please see the individual changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_alloc: fix memory accept before watermarks gets initialized
mm: decline to manipulate the refcount on a slab page
memcg: drain obj stock on cpu hotplug teardown
mm/huge_memory: drop beyond-EOF folios with the right number of refs
selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation
mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT
mm: memcontrol: fix swap counter leak from offline cgroup
mm/vma: do not register private-anon mappings with khugepaged during mmap
squashfs: fix invalid pointer dereference in squashfs_cache_delete
mm/migrate: fix shmem xarray update during migration
mm/hugetlb: fix surplus pages in dissolve_free_huge_page()
mm/damon/core: initialize damos->walk_completed in damon_new_scheme()
mm/damon: respect core layer filters' allowance decision on ops layer
filemap: move prefaulting out of hot write path
proc: fix UAF in proc_get_inode()
|
|
Unfortunately I no longer have time to meaningfully take part in the
linux kernel development.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The guidelines mention that firmware updates can't break the kernel,
but it doesn't state directly that they can't break userspace programs.
Make it explicit that firmware updates cannot break UAPI.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
[jc: fixed "no trailing newline"]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250314100137.2972355-1-jacek.lawrynowicz@linux.intel.com
|
|
Guest FPUs manage vCPU FPU states. They are allocated via
fpu_alloc_guest_fpstate() and are resized in fpstate_realloc() when XFD
features are enabled.
Since the introduction of guest FPUs, there have been inconsistencies in
the kernel buffer size and xfeatures:
1. fpu_alloc_guest_fpstate() uses fpu_user_cfg since its introduction. See:
69f6ed1d14c6 ("x86/fpu: Provide infrastructure for KVM FPU cleanup")
36487e6228c4 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
2. __fpstate_reset() references fpu_kernel_cfg to set storage attributes.
3. fpu->guest_perm uses fpu_kernel_cfg, affecting fpstate_realloc().
A recent commit in the tip:x86/fpu tree partially addressed the inconsistency
between (1) and (3) by using fpu_kernel_cfg for size calculation in (1),
but left fpu_guest->xfeatures and fpu_guest->perm still referencing
fpu_user_cfg:
https://lore.kernel.org/all/20250218141045.85201-1-stanspas@amazon.de/
1937e18cc3cf ("x86/fpu: Fix guest FPU state buffer allocation size")
The inconsistencies within fpu_alloc_guest_fpstate() and across the
mentioned functions cause confusion.
Fix them by using fpu_kernel_cfg consistently in fpu_alloc_guest_fpstate(),
except for fields related to the UABI buffer. Referencing fpu_kernel_cfg
won't impact functionalities, as:
1. fpu_guest->perm is overwritten shortly in fpu_init_guest_permissions()
with fpstate->guest_perm, which already uses fpu_kernel_cfg.
2. fpu_guest->xfeatures is solely used to check if XFD features are enabled.
Including supervisor xfeatures doesn't affect the check.
Fixes: 36487e6228c4 ("x86/fpu: Prepare guest FPU for dynamically enabled FPU features")
Suggested-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/20250317140613.1761633-1-chao.gao@intel.com
|
|
Point out that explicit permission is usually needed to tag other people
in changes, but mention that implicit permission can be sufficient in
certain cases. This fixes slight inconsistencies between Reported-by:
and Suggested-by: and makes the usage more intuitive.
While at it, explicitly mention the dangers of our bugzilla instance, as
it makes it easy to forget that email addresses visible there are only
shown to logged-in users.
The latter is not a theoretical issue, as one maintainer mentioned that
his employer received a EU GDPR (general data protection regulation)
complaint after exposing a email address used in bugzilla through a tag
in a patch description.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/588cf2763baa8fea1f4825f4eaa7023fe88bb6c1.1738852082.git.linux@leemhuis.info
|
|
The highuid.rst document describes a transition that is outdated and no
longer relevant. Additionally, it references filesystems (ncpfs and smbfs),
which have been removed or replaced.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Kang Taeho <kangtaeho2456@gmail.com>
Link: https://lore.kernel.org/r/20250313145650.278346-1-kangtaeho2456@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The IBS software filter is filtering kernel samples for regular users in
the PMI handler. It checks the instruction address in the IBS register to
determine if it was in kernel mode or not.
But it turns out that it's possible to report a kernel data address even
if the instruction address belongs to user-space. Matteo Rizzo
found that when an instruction raises an exception, IBS can report some
kernel data addresses like IDT while holding the faulting instruction's
RIP. To prevent an information leak, it should double check if the data
address in PERF_SAMPLE_DATA is in the kernel space as well.
[ mingo: Clarified the changelog ]
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250317163755.1842589-1-namhyung@kernel.org
|
|
If @server->tcpStatus is set to CifsNeedReconnect after acquiring
@ses->session_mutex in smb2_reconnect() or cifs_reconnect_tcon(), it
means that a concurrent thread failed to negotiate, in which case the
server is no longer responding to any SMB requests, so there is no
point making the caller retry the IO by returning -EAGAIN.
Fix this by returning -EHOSTDOWN to the callers on soft mounts.
Cc: David Howells <dhowells@redhat.com>
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The majority of these last fixes are for devicetree files.
These address two important regressions for the Qualcomm SMMU and the
Raspberry Pi 4 USB controller, as well as a larger number of patches
fixing minor mistakes in board specific files for Rockchips, i.MX,
starfive and broadcom.
The non-DT changes are
- A fix for an old boot regression on Renesas shmobile chips
- Another boot time regression for for the Qualcomm PDR SoC driver,
among a few other Qualcomm firmware driver fixes for efivars and
tzmem
- Minor Kconfig fixes for davinci and OMAP1
- Minor code fixes for sparx5 reset controllers, OMAP memory
controller, i.MX SCU, cpufreq and SoC drivers and a Hisilicon SoC
driver
- One more update to the Asahi maintainers, adding Neal Gompa as a
reviewer"
* tag 'soc-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: davinci: da850: fix selecting ARCH_DAVINCI_DA8XX
soc: hisilicon: kunpeng_hccs: Fix incorrect string assembly
memory: omap-gpmc: drop no compatible check
reset: mchp: sparx5: Fix for lan966x
ARM: shmobile: smp: Enforce shmobile_smp_* alignment
MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support
MAINTAINERS: Add apple-spi driver & binding files
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP
arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi
arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
arm64: dts: bcm2712: PL011 UARTs are actually r1p5
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Clean up tprobe correctly when module unload
Tracepoint probes do not set TRACEPOINT_STUB on the 'tpoint' pointer
when unloading a module, thus they show as a normal 'fprobe' instead
of 'tprobe' and never come back
- Fix leakage of tprobe module refcount
When a tprobe's target module is loaded, it gets the module's
refcount in the module notifier but forgot to put it after
registering the probe on it.
Fix it by getting the refcount only when registering tprobe.
* tag 'probes-fixes-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix leakage of module refcount
tracing: tprobe-events: Fix to clean up tprobe correctly when module unload
|
|
syzbot warns about a potential deadlock, but this is a false positive
resulting from a missing lockdep annotation: iterate_dir() locks the
parent whereas the inode_lock() it warns about locks the child, which is
guaranteed to be a different lock.
So use inode_lock_nested() instead with the appropriate lock class.
Reported-by: syzbot+019072ad24ab1d948228@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Tie together the %[xa] in the XSAVE/XRSTOR definitions with the
respective usage in the asm macros so that it is perfectly clear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d89 ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This entry has a wrong list, i2c instead of hwmon. Also, it states to
maintain Kconfig and Makefile which is not suitable for a single driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 7707cf82e138 ("dt-bindings: hwmon: Add lltc ltc4286 driver bindings")
Link: https://lore.kernel.org/r/20250317091459.41462-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Recent Ubuntu enforces 3-argument open() with O_CREAT:
CC /home/mingo/tip/tools/objtool/builtin-check.o
In file included from /usr/include/fcntl.h:341,
from builtin-check.c:9:
In function ‘open’,
inlined from ‘copy_file’ at builtin-check.c:201:11:
/usr/include/x86_64-linux-gnu/bits/fcntl2.h:52:11: error: call to ‘__open_missing_mode’ declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
52 | __open_missing_mode ();
| ^~~~~~~~~~~~~~~~~~~~~~
Use 0400 as the most restrictive mode for the new file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
|
|
Objtool warnings can be indicative of crashes, broken live patching, or
even boot failures. Ignoring them is not recommended.
Add CONFIG_OBJTOOL_WERROR to upgrade objtool warnings to errors by
enabling the objtool --Werror option. Also set --backtrace to print the
branches leading up to the warning, which can help considerably when
debugging certain warnings.
To avoid breaking bots too badly for now, make it the default for real
world builds only (!COMPILE_TEST).
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/3e7c109313ff15da6c80788965cc7450115b0196.1741975349.git.jpoimboe@kernel.org
|
|
With bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address
space qualifier") the normal compilers start caring about the __percpu
annotation, as such f67d1ffd841f ("perf/core: Detach 'struct
perf_cpu_pmu_context' and 'struct pmu' lifetimes") needs a fixup.
Fixes: f67d1ffd841f ("perf/core: Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes")
Fixes: bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address space qualifier")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: jirislaby@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
cqhci timeouts observed on brcmstb platforms during suspend:
...
[ 164.832853] mmc0: cqhci: timeout for tag 18
...
Adding cqhci_suspend()/resume() calls to disable cqe
in sdhci_brcmstb_suspend()/resume() respectively to fix
CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Cc: stable@vger.kernel.org
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Recreating objtool errors can be a manual process. Kbuild removes the
object, so it has to be compiled or linked again before running objtool.
Then the objtool args need to be reversed engineered.
Make that all easier by automatically making a backup of the object file
on error, and print a modified version of the args which can be used to
recreate.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/7571e30636359b3e173ce6e122419452bb31882f.1741975349.git.jpoimboe@kernel.org
|
|
This is similar to GCC's behavior and makes it more obvious why the
build failed.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/56f0565b15b4b4caa9a08953fa9c679dfa973514.1741975349.git.jpoimboe@kernel.org
|
|
Any objtool warning has the potential of reflecting (or triggering) a
major bug in the kernel or compiler which could result in crashing the
kernel or breaking the livepatch consistency model.
In preparation for failing the build on objtool errors/warnings, add a
new --Werror option.
[ jpoimboe: commit log, comments, error out on fatal errors too ]
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e423ea4ec297f510a108aa6c78b52b9fe30fa8c1.1741975349.git.jpoimboe@kernel.org
|
|
Add option to allow writing the changed binary to a separate file rather
than changing it in place.
Libelf makes this suprisingly hard, so take the easy way out and just
copy the file before editing it.
Also steal the -o short option from --orc. Nobody will notice ;-)
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/0da308d42d82b3bbed16a31a72d6bde52afcd6bd.1741975349.git.jpoimboe@kernel.org
|
|
Force the user to fix their cmdline if they forget the '--link' option.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8380bbf3a0fa86e03fd63f60568ae06a48146bc1.1741975349.git.jpoimboe@kernel.org
|
|
The option validations are a bit scattered, consolidate them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8f886502fda1d15f39d7351b70d4ebe5903da627.1741975349.git.jpoimboe@kernel.org
|
|
With unret validation enabled and IBT/LTO disabled, objtool runs on TUs
with --rethunk and on vmlinux.o with --unret. So this dependency isn't
valid as they don't always run on the same object.
This error never triggered before because --unret is always coupled with
--noinstr, so the first conditional in opts_valid() returns early due to
opts.noinstr being true.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/c6f5635784a28ed4b10ac4307b1858e015e6eff0.1741975349.git.jpoimboe@kernel.org
|
|
Increase the per-function WARN_FUNC() rate limit from 1 to 2. If the
number of warnings for a given function goes beyond 2, print "skipping
duplicate warning(s)". This helps root out additional warnings in a
function that might be hiding behind the first one.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/aec318d66c037a51c9f376d6fb0e8ff32812a037.1741975349.git.jpoimboe@kernel.org
|
|
Fix some outdated information in the objtool doc.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/2552ee8b48631127bf269359647a7389edf5f002.1741975349.git.jpoimboe@kernel.org
|
|
Clarify what needs to be done to resolve the missing __noreturn warning.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/ab835a35d00bacf8aff0b56257df93f14fdd8224.1741975349.git.jpoimboe@kernel.org
|
|
Make sure all fatal errors are funneled through the 'out' label with a
negative ret.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/0f49d6a27a080b4012e84e6df1e23097f44cc082.1741975349.git.jpoimboe@kernel.org
|
|
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a11 ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
|
|
dl_rebuild_rd_accounting() is defined in cpuset.c, so it makes more
sense to move related declarations to cpuset.h.
Implement the move.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSOVMpU7jpVrMU@jlelli-thinkpadt14gen4.remote.csb
|
|
The are no callers of partition_sched_domains_locked() outside
topology.c.
Stop exposing such function.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSC96a8FcqWV3G@jlelli-thinkpadt14gen4.remote.csb
|
|
partition_and_rebuild_sched_domains() and partition_sched_domains() are
now equivalent.
Remove the former as a nice clean up.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MR4ryNDJZDzsSG@jlelli-thinkpadt14gen4.remote.csb
|
|
We completely clean and restore root domains bandwidth accounting after
every root domains change, so the dl_clear_root_domain() call in
partition_sched_domains_locked() is redundant.
Remove it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRtcX4tz4tcLRR@jlelli-thinkpadt14gen4.remote.csb
|
|
Rebuilding of root domains accounting information (total_bw) is
currently broken on some cases, e.g. suspend/resume on aarch64. Problem
is that the way we keep track of domain changes and try to add bandwidth
back is convoluted and fragile.
Fix it by simplify things by making sure bandwidth accounting is cleared
and completely restored after root domains changes (after root domains
are again stable).
To be sure we always call dl_rebuild_rd_accounting while holding
cpuset_mutex we also add cpuset_reset_sched_domains() wrapper.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Co-developed-by: Waiman Long <llong@redhat.com>
Signed-off-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRfeJKJUOyUSto@jlelli-thinkpadt14gen4.remote.csb
|
|
Bandwidth checks and updates that work on root domains currently employ
a cookie mechanism for efficiency. This mechanism is very much tied to
when root domains are first created and initialized.
Generalize the cookie mechanism so that it can be used also later at
runtime while updating root domains. Also, additionally guard it with
sched_domains_mutex, since domains need to be stable while updating them
(and it will be required for further dynamic changes).
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MQaiXPvEeW_v7x@jlelli-thinkpadt14gen4.remote.csb
|
|
Create wrappers for sched_domains_mutex so that it can transparently be
used on both CONFIG_SMP and !CONFIG_SMP, as some function will need to
do.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MP5Oq9RB8jBs3y@jlelli-thinkpadt14gen4.remote.csb
|
|
SCHED_DEADLINE special tasks get a fake bandwidth that is only used to
make sure sleeping and priority inheritance 'work', but it is ignored
for runtime enforcement and admission control.
Be consistent with it also when rebuilding root domains.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250313170011.357208-2-juri.lelli@redhat.com
|
|
Use preempt_model_str() instead of manually conducting the preemption
model.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-10-bigeasy@linutronix.de
|
