| Age | Commit message (Collapse) | Author |
|---|
|
When udc_dev = NULL, it is not necessary to goto out to return, just
return NULL directly. And the out goto label can be removed.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230805045631.1858638-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 8be174835f07 ("usb: ftdi-elan: Delete driver") this include file
is not used anymore, so can remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230807141128.39092-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 32fee1df5110 ("usb: musb: remove unused davinci support")
removed these implementations but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230807140928.35932-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for UCSI commands through the following debugfs:
# /sys/kernel/debug/usb/ucsi/$UCSI_DEVICE/command
# /sys/kernel/debug/usb/ucsi/$UCSI_DEVICE/response
Eg: To execute UCSI GetCapabilities:
# echo 0x6 > /sys/kernel/debug/usb/ucsi/<ucsi device>/command
Then read the result,
# cat /sys/kernel/debug/usb/ucsi/<ucsi device>/response
0x02000320000000020000ff0400000445
UCSI command will be written into the command file and the
response for the command can be viewed under the response file.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Co-developed-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Signed-off-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230807105205.742819-1-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for PPS to CDC devices. Changes to the DCD pin
are monitored and passed to the ldisc system, which is used by
pps-ldisc.
Signed-off-by: Dan Drown <dan-netdev@drown.org>
Link: https://lore.kernel.org/r/ZM8ExV6bAvJtIA1d@vps3.drown.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Assign copyright to indicate driver rewrite is done for RACOM s.r.o.
As David no longer works for Marvell (Cavium), I'm to blame for breakage.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: David Daney <daviddaney@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/ZMeAAYx6Z3hlQBNQ@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It might be interesting to know control register value in case
clock fails to enable.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/5OX9szEMnhQH@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Parse and verify device tree node first, then setup UCTL bridge
using verified values. This avoids needless allocations
in case DT misconfiguration was found in the middle of setup.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/x3MHA4/QowMO@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Power gpio configuration is done from the middle of
dwc3_octeon_clocks_start leaving hardware in half-initialized
state if it fails. As that indicates dwc3_octeon_clocks_start
does more than just initialize the clocks rename it appropriately
and verify power gpio configuration in advance at the beginning
of device probe.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/oMRx8ze22/kK@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass dwc3_octeon instead of just the base. It fits with the
function names and it requires less change in the future if
access to dwc3_octeon is needed.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/gt58laSlqAAT@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While driver is intended to run on 64bit machines, it is compile time
tested for 32bit targets as well. Here shift count overflow is reported
for bits greater than 31, so use _ULL versions of BIT and GENMASK macros
to silence these warnings.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260537.MROrhVNM-lkp@intel.com/
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/aa2ncz6tJGNU@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DWC3 as implemented in Cavium SoC is using UCTL bridge unit
between I/O interconnect and USB controller.
Currently there is no bond with dwc3 core code, so if anything goes
wrong in UCTL setup dwc3 is left in reset, which leads to bus error
while trying to read any device register. Thus any failure in UCTL
initialization ends with kernel panic.
To avoid this move Octeon DWC3 glue code from arch/mips and make it
proper glue driver which is used instead of dwc3-of-simple.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ZMd/ReyiY7wS6DvN@lenoch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-6-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-5-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-4-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-3-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804093253.91647-2-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD3.0 Spec 6.4.1.3.1 said:
For a Sink requiring no power from the Source, the Voltage (B19-10)
shall be set to 5V and the Operational Current Shall be set to 0mA.
Therefore, we can keep sink path closed if the operational current of
the first fixed PDO is 0mA.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230801070110.1653394-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are following smatch warning:
drivers/phy/realtek/phy-rtk-usb2.c:901 get_phy_data_by_efuse()
error: 'buf' dereferencing possible ERR_PTR()
drivers/phy/realtek/phy-rtk-usb2.c:942 get_phy_data_by_efuse()
error: 'buf' dereferencing possible ERR_PTR()
drivers/phy/realtek/phy-rtk-usb3.c:460
get_phy_data_by_efuse() error: 'buf' dereferencing possible ERR_PTR()
The nvmem_cell_read may fail to read. So, driver must handle failure cases.
Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-phy/e7ff2870-c30c-4d8d-a7a9-d2d6a4962eb5@kadam.mountain/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20230801071509.20096-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
imx35.dtsi has three USB clocks. Adjust the maxItems to fix the following
schema warnings:
imx35-eukrea-mbimxsd35-baseboard.dtb: usb@53ff4400: clock-names: ['ipg', 'ahb', 'per'] is too long
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230731144422.1532498-2-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "fsl,imx35-usb" entry is missing in the supported compatible
string list.
Add it to the list.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230731144422.1532498-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In current design of the PPS APDO selection, TCPM power supply only
accepts the requested voltage which is inside the range of the selected
PPS profile. To extend the flexibility and usability, remove the checks
about the voltage range in current profile. And try to search all PPS
APDOs of the Source that fit the requested voltage.
Also remove some redundant checks in tcpm_pd_build_pps_request.
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230731162159.19483-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20230802031236.2272196-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a warning reported by coccinelle:
./drivers/usb/gadget/udc/renesas_usbf.c:3381:3-8:
No need to set .owner here. The core will do it.
The module_platform_driver() will set "THIS_MODULE" to driver.owner
when register a driver for platform-level devices, so it is redundant
initialization to set driver.owner in udc_driver statement. Remove it
to silence the warning.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230803032838.3045730-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ther are many redundant spaces, which is not consistent with
the kernel code style, so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230804091713.41503-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When platform_get_irq() fails, it may return -EPROBE_DEFER, which
suggested deferred probing, it is very important to propagate it
upstream. We cannot override it with other error code.
Commit ce753ad1549c ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk") makes sure IRQ0 is not returned.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230804110005.97061-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When platform_get_irq() is called, the error message has been printed,
so it need not to call dev_err_probe() to present error messages.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230801122834.89168-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When platform_get_irq_byname() fails, it may return -EPROBE_DEFER,
which suggested deferred probing, it is very important to propagate it
upstream. We cannot override it with other error code.
Commit ce753ad1549c ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk") makes sure IRQ0 is not returned.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230804105430.95773-1-wangzhu9@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here for testing and for other patches to be
applied on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
with the newly added DMA mode - it had a number of issues exposed when
tested in a wider range of use cases, both race condition style issues
and issues with different inputs to those that had been used in test"
* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the the mt6358 driver, fixing error
reporting and a bootstrapping issue"
* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6358: Fix incorrect VCN33 sync error message
regulator: mt6358: Sync VCN33_* enable status after checking ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a set of USB driver fixes for 6.5-rc4. Include in here are:
- new USB serial device ids
- dwc3 driver fixes for reported issues
- typec driver fixes for reported problems
- gadget driver fixes
- reverts of some problematic USB changes that went into -rc1
All of these have been in linux-next with no reported problems"
* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: misc: ehset: fix wrong if condition
usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
usb: gadget: call usb_gadget_check_config() to verify UDC capability
usb: typec: Use sysfs_emit_at when concatenating the string
usb: typec: Iterate pds array when showing the pd list
usb: typec: Set port->pd before adding device for typec_port
usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
Revert "usb: xhci: tegra: Fix error check"
USB: gadget: Fix the memory leak in raw_gadget driver
usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
USB: quirks: add quirk for Focusrite Scarlett
usb: xhci-mtk: set the dma max_seg_size
MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
usb: dwc3: don't reset device side if dwc3 was configured as host-only
usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
usb: ohci-at91: Fix the unhandle interrupt when resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems"
* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Preserve original value of DLF register
tty: serial: sh-sci: Fix sleeping in atomic context
serial: sifive: Fix sifive_serial_console_setup() section
Documentation: devices.txt: reconcile serial/ucc_uart minor numers
MAINTAINERS: Update TTY layer for lists and recently added files
tty: n_gsm: fix UAF in gsm_cleanup_mux
TIOCSTI: always enable for CAP_SYS_ADMIN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.5-rc4 that resolve
some reported problems. These fixes are:
- fix for an old bug in the r8712 driver
- fbtft driver fix for a spi device
- potential overflow fix in the ks7010 driver
All of these have been in linux-next with no reported problems"
* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
staging: r8712: Fix memory leak in _r8712_init_xmit_priv()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char driver and Documentation fixes from Greg KH:
"Here is a char driver fix and some documentation updates for 6.5-rc4
that contain the following changes:
- sram/genalloc bugfix for reported problem
- security-bugs.rst update based on recent discussions
- embargoed-hardware-issues minor cleanups and then partial revert
for the project/company lists
All of these have been in linux-next for a while with no reported
problems, and the documentation updates have all been reviewed by the
relevant developers"
* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/genalloc: Name subpools by of_node_full_name()
Documentation: embargoed-hardware-issues.rst: add AMD to the list
Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
Documentation: security-bugs.rst: clarify CVE handling
Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a rtmutex race condition resulting from sharing of the sort key
between the lock waiters and the PI chain tree (->pi_waiters) of a
task by giving each tree their own sort key
* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix task->pi_waiters integrity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD's automatic IBRS doesn't enable cross-thread branch target
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
x86: Fix kthread unwind
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Work around an erratum on GIC700, where a race between a CPU handling
a wake-up interrupt, a change of affinity, and another CPU going to
sleep can result in a lack of wake-up event on the next interrupt
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
CPU in the system
* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
irq-bcm6345-l1: Do not assume a fixed block to cpu mapping
|
|
The HX3 family comes in different variants (up to 4 USB 3.0 ports;
multi-TT), e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x.
This initial version of the binding only describes USB related aspects
of the HX3 family, it does not cover the option of connecting the
controller as an i2c slave.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230620-hx3-v7-3-f79b4b22a1bf@skidata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The HX3 comes in different variants (up to 4 USB 3.0 ports; multi-TT),
e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x. It operates with two
different power supplies: 1V2 and 3V3.
Add the support for this hub, for controlling the reset pin and the
power supplies.
Reset time is extracted from data sheet, page 24:
"The RESETN pin can be tied to VDD_IO through an external resistor and
to ground (GND) through an external capacitor (minimum 5 ms time
constant)."
V_IH min is given at 0.7 * 3V3 (page 34), therefore use 10ms.
Also add USB PIDs for the USB 2.0 and USB 3.0 root hub.
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230620-hx3-v7-2-f79b4b22a1bf@skidata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As some of the onboard hubs require multiple power supplies, provide the
environment to support them.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230620-hx3-v7-1-f79b4b22a1bf@skidata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When USB_COMMON are not enabled, phy-rtk-usb2 and phy-rtk-usb3 suffers
a build error due to a missing usb_debug_root that is provided
by CONFIG_USB_COMMON, so make the driver select USB_COMMON.
or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb2.o: in function `create_phy_debug_root':
>> drivers/phy/realtek/phy-rtk-usb2.c:715: undefined reference to `usb_debug_root'
>> or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb2.c:715: undefined reference to `usb_debug_root'
or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb3.o: in function `create_phy_debug_root':
>> drivers/phy/realtek/phy-rtk-usb3.c:349: undefined reference to `usb_debug_root'
>> or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb3.c:349: undefined reference to `usb_debug_root'
Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Fixed: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307290733.weSlHrGp-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202307291022.3pVeTR9z-lkp@intel.com/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20230729053029.6226-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.
According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setting "hibernated" argument of
ohci_resume().
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230728120648.5878-1-aarongt.shen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document at91sam9g45-ehci compatible for usb-ehci.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230728102318.265360-1-varshini.rajendran@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the error path in f_midi2_block_opts_create(), mutex_unlock() is missed,
fix it by move the unlock after 'out' label.
Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230728085120.3192474-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull smb client fixes from Steve French:
"Four small SMB3 client fixes:
- two reconnect fixes (to address the case where non-default
iocharset gets incorrectly overridden at reconnect with the
default charset)
- fix for NTLMSSP_AUTH request setting a flag incorrectly)
- Add missing check for invalid tlink (tree connection) in ioctl"
* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add missing return value check for cifs_sb_tlink
smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
cifs: fix charset issue in reconnection
fs/nls: make load_nls() take a const parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.
If a resize shrinks the buffer it clears the read count to notify
readers that they need to reset. But the read count is also used for
accounting and this causes the numbers to be off. Instead, create a
separate variable to use to notify readers to reset.
- Fix the ref counts of the "soft disable" mode. The wrong value was
used for testing if soft disable mode should be enabled or disable,
but instead, just change the logic to do the enable and disable in
place when the SOFT_MODE is set or cleared.
- Several kernel-doc fixes
- Removal of unused external declarations
* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warning in trace_buffered_event_disable()
ftrace: Remove unused extern declarations
tracing: Fix kernel-doc warnings in trace_seq.c
tracing: Fix kernel-doc warnings in trace_events_trigger.c
tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
ring-buffer: Fix kernel-doc warnings in ring_buffer.c
ring-buffer: Fix wrong stat of cpu_buffer->read
|
