| Age | Commit message (Collapse) | Author |
|---|
|
This property has always been supported by the Linux driver; see
commit 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i"). In fact, the
original driver submission includes the phy-supply code but no mention
of it in the binding, so the omission appears to be accidental. In
addition, the property is documented in the binding for the previous
hardware generation, allwinner,sun7i-a20-gmac.
Document phy-supply in the binding to fix devicetree validation for the
25+ boards that already use this property.
Fixes: 0441bde003be ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is now possible for a system to have more than 32 endpoints. As
a result, registers related to endpoint suspend are parameterized,
with 32 endpoints represented in one more registers.
In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register
offset is determined properly, but the bit mask used still assumes
the number of enpoints won't exceed 32. This is a bug. Fix it.
Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Po-Hsu Lin says:
====================
selftests: net: fix for arp_ndisc_evict_nocarrier test
This patchset will fix a false-positive issue caused by the command in
cleanup_v6() of the arp_ndisc_evict_nocarrier test.
Also, it will make the test to return a non-zero value for any failure
reported in the test for us to avoid false-negative results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
arp_ndisc_evict_nocarrier
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.
Fixes: 7642cc28fd37 ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
|
|
Christian Marangi says:
====================
net: dsa: qca8k: multiple fix on mdio read/write
Due to some problems in reading the Documentation and elaborating it
some wrong assumption were done. The error was reported and notice only
now due to how things are setup in the code flow.
First 2 patch fix mgmt eth where the lenght calculation is very
confusing and in step of word size. (the related commit description have
an extensive description about how this mess works)
Last 3 patch revert the broken mdio cache and apply a correct version
that should still save some extra mdio in phy poll secnario.
These 5 patch fix each related problem and apply what the Documentation
actually say.
Changes v2:
- Add cover letter
- Fix typo in revert patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Improve mdio master read/write by using singe mii read/write lo/hi.
In a read and write we need to poll the mdio master regs in a busy loop
to check for a specific bit present in the upper half of the reg. We can
ignore the other half since it won't contain useful data. This will save
an additional useless read for each read and write operation.
In a read operation the returned data is present in the mdio master reg
lower half. We can ignore the other half since it won't contain useful
data. This will save an additional useless read for each read operation.
In a read operation it's needed to just set the hi half of the mdio
master reg as the lo half will be replaced by the result. This will save
an additional useless write for each read operation.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It may be useful to read/write just the lo or hi half of a reg.
This is especially useful for phy poll with the use of mdio master.
The mdio master reg is composed by the first 16 bit related to setup and
the other half with the returned data or data to write.
Refactor the mii function to permit single mii read/write of lo or hi
half of the reg.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 2481d206fae7884cd07014fd1318e63af35e99eb.
The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.
What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.
Revert the change in favor of a better and correct implementation.
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.
Update the define with the real world value.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.
As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...
Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)
This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.
In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.
To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
|
|
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
|
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove the irq_chip from pmic_eic structure,
use the various calls by defining the statically
irq_chip structure.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove the irq_chip from pmic_eic structure,
use the various calls by defining the statically
irq_chip structure.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There is a variable pinctrl declared without initializer. And then
has the case (switch operation chose the default case) to directly
use this uninitialized value, this is not a safe behavior. So here
initialize the pinctrl as 0 to avoid this issue.
This is reported by Coverity.
Fixes: 13c5d4ce8060 ("gpio: pca953x: Add support for PCAL6534")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Commit 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups") refactors
fwnode_get_named_gpiod() and gpiod_get_index() into a unified
gpiod_find_and_request() helper.
The old functions both initialized their local lookupflags variable to
GPIO_LOOKUP_FLAGS_DEFAULT, but the new code leaves it uninitialized.
This is a problem for at least ACPI platforms, where acpi_find_gpio()
only does a bunch of *lookupflags |= GPIO_* statements and thus relies
on the variable being initialized.
The variable not being initialized leads to:
1. Potentially the wrong flags getting used
2. The check for conflicting lookup flags in gpiod_configure_flags():
"multiple pull-up, pull-down or pull-disable enabled, invalid config"
sometimes triggering, making the GPIO unavailable
Restore the initialization of lookupflags to GPIO_LOOKUP_FLAGS_DEFAULT
to fix this.
Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.
Fixes: 963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c571798868b5fa42198427a7e6df56c09)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fcff58044f7aa3b284965af47f472fb0)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is unneeded since commit 69304379ff03 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
|
|
commit 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f959b ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.
Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.
Fixes: 016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit 4071d98b296a5bc5fd4b15ec651bd05800ec9510)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.
v2 (Mani)
- Also revamp the docs for the different passes.
Testcase: igt@gem_ppgtt@shrink-vs-evict-*
Fixes: 7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570
References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Mani Milani <mani@chromium.org>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Mani Milani <mani@chromium.org>
Tested-by: Mani Milani <mani@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com
(cherry picked from commit 801fa7a81f6da533cc5442fc40e32c72b76cd42a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit 50490ce05b7a50b0bd4108fa7d6db3ca2972fa83)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.
Fixes: 77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit 4d5cf7b1680a1e6db327e3c935ef58325cbedb2c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
of_phy_find_device() return device node with refcount incremented.
Call put_device() to relese it when not needed anymore.
Fixes: ab4e6ee578e8 ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Arinzon says:
====================
ENA driver bug fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device supports a PCIe optimization hint, which indicates on
which NUMA the queue is currently processed. This hint is utilized
by PCIe in order to reduce its access time by accessing the
correct NUMA resources and maintaining cache coherence.
The driver calls the register update for the hint (called TPH -
TLP Processing Hint) during the NAPI loop.
Though the update is expected upon a NUMA change (when a queue
is moved from one NUMA to the other), the current logic performs
a register update when the queue is moved to a different CPU,
but the CPU is not necessarily in a different NUMA.
The changes include:
1. Performing the TPH update only when the queue has switched
a NUMA node.
2. Moving the TPH update call to be triggered only when NAPI was
scheduled from interrupt context, as opposed to a busy-polling loop.
This is due to the fact that during busy-polling, the frequency
of CPU switches for a particular queue is significantly higher,
thus, the likelihood to switch NUMA is much higher. Therefore,
providing the frequent updates to the device upon a NUMA update
are unlikely to be beneficial.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RX ring can be NULL in XDP use cases where only TX queues
are configured. In this scenario, the RX interrupt moderation
value sent to the device remains in its default value of 0.
In this change, setting the default value of the RX interrupt
moderation to be the same as of the TX.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the upper bound on rx_copybreak tighter, by
making sure it is smaller than the minimum of mtu and
ENA_PAGE_SIZE. With the current upper bound of mtu,
rx_copybreak can be larger than a page. Such large
rx_copybreak will not bring any performance benefit to
the user and therefore makes no sense.
In addition, the value update was only reflected in
the adapter structure, but not applied for each ring,
causing it to not take effect.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Osama Abboud <osamaabb@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Redirecting packets with XDP Redirect is done in two phases:
1. A packet is passed by the driver to the kernel using
xdp_do_redirect().
2. After finishing polling for new packets the driver lets the kernel
know that it can now process the redirected packet using
xdp_do_flush_map().
The packets' redirection is handled in the napi context of the
queue that called xdp_do_redirect()
To avoid calling xdp_do_flush_map() each time the driver first checks
whether any packets were redirected, using
xdp_flags |= xdp_verdict;
and
if (xdp_flags & XDP_REDIRECT)
xdp_do_flush_map()
essentially treating XDP instructions as a bitmask, which isn't the case:
enum xdp_action {
XDP_ABORTED = 0,
XDP_DROP,
XDP_PASS,
XDP_TX,
XDP_REDIRECT,
};
Given the current possible values of xdp_action, the current design
doesn't have a bug (since XDP_REDIRECT = 100b), but it is still
flawed.
This patch makes the driver use a bitmask instead, to avoid future
issues.
Fixes: a318c70ad152 ("net: ena: introduce XDP redirect implementation")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The size of packets that were forwarded or dropped by XDP wasn't added
to the total processed bytes statistic.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the queues aren't destroyed when we only exchange XDP programs,
there's no need to re-register them again.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On driver initialization, RSS hash initial value is set to zero,
instead of the default value. This happens because we pass NULL as
the RSS key parameter, which caused us to never initialize
the RSS hash value.
This patch fixes it by making sure the initial value is set, no matter
what the value of the RSS key is.
Fixes: 91a65b7d3ed8 ("net: ena: fix potential crash when rxfh key is NULL")
Signed-off-by: Nati Koler <nkoler@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the
infinity loop for argument parsing in cmsg_sender.
Variable "o" in cs_parse_args() for taking getopt() should be an int,
otherwise it will be 255 when getopt() returns -1 on non-amd64 system
and thus causing infinity loop.
Link: https://lore.kernel.org/lkml/CA+G9fYsM2k7mrF7W4V_TrZ-qDauWM394=8yEJ=-t1oUg8_40YA@mail.gmail.com/t/
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-fixes-2022-12-28
|
|
The driver does not call tasklet_kill in several places.
Add the calls to fix it.
Fixes: 85b85c853401 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the PF check the VF alive by the KEEP_ALVE
mailbox from VF. VF keep sending the mailbox per 2
seconds. Once PF lost the mailbox for more than 8
seconds, it will regards the VF is abnormal, and stop
notifying the state change to VF, include link state,
vf mac, reset, even though it receives the KEEP_ALIVE
mailbox again. It's inreasonable.
This patch fixes it. PF will record the state change which
need to notify VF when lost the VF's KEEP_ALIVE mailbox.
And notify VF when receive the mailbox again. Introduce a
new flag HCLGE_VPORT_STATE_INITED, used to distinguish the
case whether VF driver loaded or not. For VF will query
these states when initializing, so it's unnecessary to
notify it in this case.
Fixes: aa5c4f175be6 ("net: hns3: add reset handling for VF when doing PF reset")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
