summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-20mt76: unify channel survey update codeFelix Fietkau
Host time is used to calculate the channel active time on mt7603 and mt7615. Use the same on mt76x02 and move the lock to core code to get rid of some duplicated code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: switch to a different counter for survey busy timeFelix Fietkau
MT_MIB_STAT_PSCCA only counts rx CCA busy time, which does not include tx time. MT_MIB_STAT_CCA counts full busy time, including Rx, Tx and NAV Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: track tx airtime for airtime fairness and surveyFelix Fietkau
Poll per-station hardware counters after tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: track rx airtime for airtime fairness and surveyFelix Fietkau
Report total rx airtime for valid stations as BSS rx time in survey mt7615 is left out for now, it will be supported later by reading hardware counters instead of calculating airtime in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: store current channel survey_state in struct mt76_devFelix Fietkau
Move mt76_channel_state() from mt76.h to mac80211.c Preparation for updating channel state from more places in the drivers/core Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4Felix Fietkau
This reduces the struct size and is useful for adding more flags later Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: report rx a-mpdu subframe statusFelix Fietkau
This can be used in monitor mode to figure out which subframes were sent as part of which A-MPDU Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: remove q_rx field from struct mt7603_devFelix Fietkau
It is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: collect aggregation statsLorenzo Bianconi
Introduce ampdu_stat entry in mt7603 debugfs in order to dump 802.11 aggr cumulative statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: collect aggregation statsLorenzo Bianconi
Introduce ampdu_stat entry in mt7615 debugfs in order to dump 802.11 aggr cumulative statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move aggr_stats array in mt76_devLorenzo Bianconi
Move aggr_stats array from mt76x02_dev to mt76_dev in order to be reused adding aggregation stats for mt7603/mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: add queue entry in debugfsLorenzo Bianconi
Introduce mt7615_queues_read routine to dump hw queue related info. Add hw ac queues statistics in mt7615 debugfs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move queue debugfs entry to driver specific codeLorenzo Bianconi
Move queue debugfs entry to driver specific code since mt7615 devices rely on a different queue layout Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb moduleLorenzo Bianconi
Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the code is shared between both drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0u: reset counter starting the deviceLorenzo Bianconi
Remove mt76x02_mac_reset_counters from mt76x0_init_hardware since it will be run starting the device Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_startLorenzo Bianconi
Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move mac_reset_counter in mt76x02_lib moduleLorenzo Bianconi
Unify mac_reset_counter routine and move it in mt76x02_lib module since it is shared by all mt76x02 drivers (pci/usb) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: enable SCS by defaultLorenzo Bianconi
Enable Smart Carrier Sense algorithm by default in order to improve performances in a noisy environment Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smallerColin Ian King
Don't populate the array mt76x0_chan_map on the stack but instead make it static const. Makes the object code smaller by 80 bytes. Before: text data bss dec hex filename 7685 1192 0 8877 22ad mediatek/mt76/mt76x0/eeprom.o After: text data bss dec hex filename 7541 1256 0 8797 225d mediatek/mt76/mt76x0/eeprom.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: usb: add lockdep_assert_held in __mt76u_vendor_requestLorenzo Bianconi
Introduce lockdep_assert_held macro in __mt76u_vendor_request routine and remove comments regarding usb_ctrl_mtx lock Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove empty flag in mt76_txq_schedule_listLorenzo Bianconi
Remove empty flag in mt76_txq_schedule_list and mt76_txq_send_burst since we just need retry_q length to notify mac80211 to reschedule the current tx queue Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdownFelix Fietkau
The workqueue item needs to be fully shut down before the struct can be freed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove aggr_work field from struct mt76_wcidFelix Fietkau
It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: fix control frame rx in monitor modeFelix Fietkau
Adjust filters and ensure frames don't get sent to MCU instead of host Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20rtl8xxxu: Remove set but not used variable 'vif','dev','len'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable] They are introduced by commit e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna"), but never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: remove monitor interface when detachingRafał Miłecki
This fixes a minor WARNING in the cfg80211: [ 130.658034] ------------[ cut here ]------------ [ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: disable PCIe interrupts before bus resetRafał Miłecki
Keeping interrupts on could result in brcmfmac freeing some resources and then IRQ handlers trying to use them. That was obviously a straight path for crashing a kernel. Example: CPU0 CPU1 ---- ---- brcmf_pcie_reset brcmf_pcie_bus_console_read brcmf_detach ... brcmf_fweh_detach brcmf_proto_detach brcmf_pcie_isr_thread ... brcmf_proto_msgbuf_rx_trigger ... drvr->proto->pd brcmf_pcie_release_irq [ 363.789218] Unable to handle kernel NULL pointer dereference at virtual address 00000038 [ 363.797339] pgd = c0004000 [ 363.800050] [00000038] *pgd=00000000 [ 363.803635] Internal error: Oops: 17 [#1] SMP ARM (...) [ 364.029209] Backtrace: [ 364.031725] [<bf243838>] (brcmf_proto_msgbuf_rx_trigger [brcmfmac]) from [<bf2471dc>] (brcmf_pcie_isr_thread+0x228/0x274 [brcmfmac]) [ 364.043662] r7:00000001 r6:c8ca0000 r5:00010000 r4:c7b4f800 Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: allows to enable/disable HCI link PS mechanismYan-Hsuan Chuang
Different interfaces have its own link-related power save mechanism. Such as PCI can enter L1 state based on the traffic on the link, and sometimes driver needs to enable/disable it to avoid some issues, like throughput degrade when PCI trying to enter L1 state even if driver is having heavy traffic. For now, rtw88 only supports PCIE chips, and they just need to disable ASPM L1 when driver is not in power save mode, such as IPS and LPS. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: enable CLKREQ function if host supports itYan-Hsuan Chuang
By Realtek's design, there are two HW modules associated for CLKREQ, one is responsible to follow the PCIE host settings, and another is to actually working on it. But the module that is actually working on it is default disabled, and driver should enable that module if host and device have successfully sync'ed with each other. The module is default disabled because sometimes the host does not support it, and if there is any incorrect settings (ex. CLKREQ# is not Bi-Direction), device can be lost and disconnected to the host. So driver should first check after host and device are sync'ed, and the host does support the function and set it in configuration space, then driver can turn on the HW module to working on it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use for loop instead of while loop for DBI/MDIOYan-Hsuan Chuang
Use a for loop to polling DBI/MDIO read/write flags to avoid infinite loop happens Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use macros to access PCI DBI/MDIO registersYan-Hsuan Chuang
Add some register and bit macros to access DBI/MDIO register. This should not change the logic. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: process HE capabilities requestsMikhail Karpenko
Pass HE interface type data requests between firmware and driver. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: add TLV for extension IEsMikhail Karpenko
Extension information elements have additional field for ID. This commit adds TLV for such elements and a structure for interface HE capabilities communication with firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: signal that all packets coming from device are already floodedIgor Mitsyanko
Firmware floods all packets that need to be flooded (multicast, broadcast, unknown unicast) as required. Tell kernel bridge subsystem it does not need to flood packet itself by marking each incoming frame with skb->offload_fwd_mark flag. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: advertise netdev port parent IDIgor Mitsyanko
Use MAC address of the first active radio as a unique device ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: add interface ID to each packetIgor Mitsyanko
Add interface ID information to the tail of each transmitted packet so that firmware can know to which interface the packet belongs to. This is only needed if device supports HW switch capability. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: track broadcast domain of each interfaceIgor Mitsyanko
If firmware reports that it supports hardware switch capabilities, driver needs to track and notify device whenever broadcast domain of a particular network device changes (ie. whenever it's upper master device changes). Firmware needs a unique ID to tell broadcast domains from each other which is an opaque number otherwise. For that purpose we can use netspace:ifidx pair to uniquely identify each broadcast domain: - if netdev is not part of a bridge, then use it's own ifidx as a broadcast domain ID - if netdev is part of a bridge, then use bridge netdev ifidx as broadcast domain ID Firmware makes sure that packets are only forwarded between interfaces marked with the same broadcast domain ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: remove VIF in firmware in case of errorIgor Mitsyanko
Currently in case of error when registering network device with the kernel, we won't properly cleanup VIF state in firmware due to DEL_VIF command will not be send to wifi card. Make sure it does. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: set proper udelay within rf_serial_readPing-Ke Shih
Since read RF register is an indirect access that hardware needs time to accomplish read action, but there's no ready bit, so delay is required to guarantee the read value is correct. After investigating internal documents, these delays are reduced as proper values. Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: rf_lock use non-irqsave spin_lockPing-Ke Shih
rf_lock is used to protect RF register access, but they will not called from interrupt context, so *_irqsave version isn't necessary. Then, these delays don't affect IRQ services. The old code holds spin_lock_irqsave() that will be detected a long delay as below: kworker/-276 4d... 0us : _raw_spin_lock_irqsave kworker/-276 4d... 0us : rtl8723_phy_rf_serial_read <-rtl8723de_phy_set_rf_reg kworker/-276 4d... 1us : rtl8723_phy_query_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 3us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us : __const_udelay <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us!: delay_mwaitx <-rtl8723_phy_rf_serial_read kworker/-276 4d... 1004us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read [...] Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20ipw2x00: remove set but not used variable 'force_update'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2100.c: In function shim__set_security: drivers/net/wireless/intel/ipw2x00/ipw2100.c:5582:9: warning: variable force_update set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20ipw2x00: remove set but not used variable 'reason'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ipw_wx_set_mlme: drivers/net/wireless/intel/ipw2x00/ipw2200.c:6805:9: warning: variable reason set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: remove set but not used variable 'mpnum','nsp','nmp'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_get_regaddr: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:790:5: warning: variable mpnum set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:10: warning: variable nsp set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:5: warning: variable nmp set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This reverts a number of changes to the khwrng thread which feeds the kernel random number pool from hwrng drivers. They were trying to fix issues with suspend-and-resume but ended up causing regressions" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "hwrng: core - Freeze khwrng thread during suspend"
2019-11-17Revert "hwrng: core - Freeze khwrng thread during suspend"Herbert Xu
This reverts commit 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend"), ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()") and 59b569480dc8 ("random: Use wait_event_freezable() in add_hwgenerator_randomness()"). These patches introduced regressions and we need more time to get them ready for mainline. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixes: disable unreliable HPET on Intel Coffe Lake platforms, and fix a lockdep splat in the resctrl code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Fix potential lockdep warning x86/quirks: Disable HPET on Intel Coffe Lake platforms
2019-11-16Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix integer truncation bug in __do_adjtimex()" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp/y2038: Remove incorrect time_t truncation
2019-11-16Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: a handful of AUX event handling related fixes, a Sparse fix and two ABI fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix missing static inline on perf_cgroup_switch() perf/core: Consistently fail fork on allocation failures perf/aux: Disallow aux_output for kernel events perf/core: Reattach a misplaced comment perf/aux: Fix the aux_output group inheritance fix perf/core: Disallow uncore-cgroup events
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in xfrm_state code, from Steffen Klassert. 2) Fix races between devlink reload operations and device setup/cleanup, from Jiri Pirko. 3) Null deref in NFC code, from Stephan Gerhold. 4) Refcount fixes in SMC, from Ursula Braun. 5) Memory leak in slcan open error paths, from Jouni Hogander. 6) Fix ETS bandwidth validation in hns3, from Yonglong Liu. 7) Info leak on short USB request answers in ax88172a driver, from Oliver Neukum. 8) Release mem region properly in ep93xx_eth, from Chuhong Yuan. 9) PTP config timestamp flags validation, from Richard Cochran. 10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer. 11) Missing free_netdev() in gemini driver, from Chuhong Yuan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits) ipmr: Fix skb headroom in ipmr_get_route(). net: hns3: cleanup of stray struct hns3_link_mode_mapping net/smc: fix fastopen for non-blocking connect() rds: ib: update WR sizes when bringing up connection net: gemini: add missed free_netdev net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid seg6: fix skb transport_header after decap_and_validate() seg6: fix srh pointer in get_srh() net: stmmac: Use the correct style for SPDX License Identifier octeontx2-af: Use the correct style for SPDX License Identifier ptp: Extend the test program to check the external time stamp flags. mlx5: Reject requests to enable time stamping on both edges. igb: Reject requests that fail to enable time stamping on both edges. dp83640: Reject requests to enable time stamping on both edges. mv88e6xxx: Reject requests to enable time stamping on both edges. ptp: Introduce strict checking of external time stamp options. renesas: reject unsupported external timestamp flags mlx5: reject unsupported external timestamp flags igb: reject unsupported external timestamp flags dp83640: reject unsupported external timestamp flags ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 21:22:34 +0000