summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-23ice: Fix multiple static analyser warningsAnirudh Venkataramanan
This patch fixes the following smatch errors: 1) Fix "odd binop '0x0 & 0xc'" when performing the bitwise-and with a constant value of zero (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128_FLAG). Remove a similar bitwise-and with 0 in ice_add_marker_act() and use the right mask ICE_LG_ACT_GENERIC_OFFSET_M in the expression. 2) Fix a similar issue "odd binop '0x0 & 0x1800' in ice_req_irq_msix_misc. 3) Fix "odd binop '0x380000 & 0x7fff8'" in ice_add_marker_act(). Also, use a new define ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX instead of magic number '7'. 4) Fix warn: odd binop '0x0 & 0x18' in ice_set_dflt_vsi_ctx() by removing unnecessary logic to explicitly unset bits 3 and 4 in port_vlan_bits. These bits are unset already by the memset on ctxt->info. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-23blk-wbt: don't maintain inflight counts if disabledJens Axboe
A previous commit removed the ability to have per-rq flags. We used those flags to maintain inflight counts. Since we don't have those anymore, we have to always maintain inflight counts, even if wbt is disabled. This is clearly suboptimal. Add a queue quiesce around changing the wbt latency settings from sysfs to work around this. With that, we can reliably put the enabled check in our bio_to_wbt_flags(), since we know the WBT_TRACKED flag will be consistent for the lifetime of the request. Fixes: c1c80384c8f ("block: remove external dependency on wbt_flags") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-23powerpc/mce: Fix SLB rebolting during MCE recovery path.Mahesh Salgaonkar
The commit e7e81847478 ("powerpc/64s: move machine check SLB flushing to mm/slb.c") introduced a bug in reloading bolted SLB entries. Unused bolted entries are stored with .esid=0 in the slb_shadow area, and that value is now used directly as the RB input to slbmte, which means the RB[52:63] index field is set to 0, which causes SLB entry 0 to be cleared. Fix this by storing the index bits in the unused bolted entries, which directs the slbmte to the right place. The SLB shadow area is also used by the hypervisor, but PAPR is okay with that, from LoPAPR v1.1, 14.11.1.3 SLB Shadow Buffer: Note: SLB is filled sequentially starting at index 0 from the shadow buffer ignoring the contents of RB field bits 52-63 Fixes: e7e81847478b ("powerpc/64s: move machine check SLB flushing to mm/slb.c") Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-23KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pagesPaul Mackerras
Commit 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in the pinned physical page", 2018-07-17) added some checks to ensure that guest DMA mappings don't attempt to map more than the guest is entitled to access. However, errors in the logic mean that legitimate guest requests to map pages for DMA are being denied in some situations. Specifically, if the first page of the range passed to mm_iommu_get() is mapped with a normal page, and subsequent pages are mapped with transparent huge pages, we end up with mem->pageshift == 0. That means that the page size checks in mm_iommu_ua_to_hpa() and mm_iommu_up_to_hpa_rm() will always fail for every page in that region, and thus the guest can never map any memory in that region for DMA, typically leading to a flood of error messages like this: qemu-system-ppc64: VFIO_MAP_DMA: -22 qemu-system-ppc64: vfio_dma_map(0x10005f47780, 0x800000000000000, 0x10000, 0x7fff63ff0000) = -22 (Invalid argument) The logic errors in mm_iommu_get() are: (a) use of 'ua' not 'ua + (i << PAGE_SHIFT)' in the find_linux_pte() call (meaning that find_linux_pte() returns the pte for the first address in the range, not the address we are currently up to); (b) use of 'pageshift' as the variable to receive the hugepage shift returned by find_linux_pte() - for a normal page this gets set to 0, leading to us setting mem->pageshift to 0 when we conclude that the pte returned by find_linux_pte() didn't match the page we were looking at; (c) comparing 'compshift', which is a page order, i.e. log base 2 of the number of pages, with 'pageshift', which is a log base 2 of the number of bytes. To fix these problems, this patch introduces 'cur_ua' to hold the current user address and uses that in the find_linux_pte() call; introduces 'pteshift' to hold the hugepage shift found by find_linux_pte(); and compares 'pteshift' with 'compshift + PAGE_SHIFT' rather than 'compshift'. The patch also moves the local_irq_restore to the point after the PTE pointer returned by find_linux_pte() has been dereferenced because otherwise the PTE could change underneath us, and adds a check to avoid doing the find_linux_pte() call once mem->pageshift has been reduced to PAGE_SHIFT, as an optimization. Fixes: 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in the pinned physical page") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-23powerpc/mm/radix: Only need the Nest MMU workaround for R -> RW transitionAneesh Kumar K.V
The Nest MMU workaround is only needed for RW upgrades. Avoid doing that for other PTE updates. We also avoid clearing the PTE while marking it invalid. This is because other page table walkers will find this PTE none and can result in unexpected behaviour due to that. Instead we clear _PAGE_PRESENT and set the software PTE bit _PAGE_INVALID. pte_present() is already updated to check for both bits. This makes sure page table walkers will find the PTE present and things like pte_pfn(pte) returns the right value. Based on an original patch from Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-23Merge tag 'perf-core-for-mingo-4.19-20180820' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: LLVM/clang/eBPF: (Arnaldo Carvalho de Melo) - Allow passing options to llc in addition to to clang. Hardware tracing: (Jack Henschel) - Improve error message for PMU address filters, clarifying availability of that feature in hardware having hardware tracing such as Intel PT. Python interface: (Jiri Olsa) - Fix read_on_cpu() interface. ELF/DWARF libraries: (Jiri Olsa) - Fix handling of the combo compressed module file + decompressed associated debuginfo file. Build (Rasmus Villemoes) - Disable parallelism for 'make clean', avoiding multiple submakes deleting the same files and causing the build to fail on systems such as Yocto. Kernel ABI copies: (Arnaldo Carvalho de Melo) - Update tools's copy of x86's cpufeatures.h. - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'. Miscellaneous: (Steven Rostedt) - Change libtraceevent to SPDX License format. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-08-23drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80Kai-Heng Feng
Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc instead of 8 bpc. Apply 6 bpc quirk for the panel to fix it. BugLink: https://bugs.launchpad.net/bugs/1788308 Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.com
2018-08-23ACPI: fix menuconfig presentation of ACPI submenuArnd Bergmann
My fix for a recursive Kconfig dependency caused another issue where the ACPI specific options end up in the top-level menu in 'menuconfig'. This was an unintended side-effect of having a silent option between 'menuconfig ACPI' and 'if ACPI'. Moving the ARCH_SUPPORTS_ACPI symbol ahead of the ACPI menu solves that problem and restores the previous presentation. Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 2c870e61132c (arm64: fix ACPI dependencies) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-22Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2018-08-23 Here are two important Bluetooth fixes for the MediaTek and RealTek HCI drivers. Please let me know if there are any issues pulling, thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22Merge branch 'hns3-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: bug fix & optimization for HNS3 driver This patchset presents a bug fix found out when CONFIG_ARM64_64K_PAGES enable and an optimization for HNS3 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: hns3: modify variable type in hns3_nic_reuse_pageHuazhong Tan
'truesize' is supposed to be u32, not int, so fix it. Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: hns3: fix page_offset overflow when CONFIG_ARM64_64K_PAGESHuazhong Tan
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE is 65536(64K). But the type of page_offset is u16, it will overflow. So change it to u32, when "CONFIG_ARM64_64K_PAGES" enabled. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net/ipv6: init ip6 anycast rt->dst.input as ip6_inputHangbin Liu
Commit 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path") forgot to handle anycast route and init anycast rt->dst.input to ip6_forward. Fix it by setting anycast rt->dst.input back to ip6_input. Fixes: 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22Merge branch 'hns-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns: bug fixes & optimization for HNS driver This patchset presents some bug fixes found out when CONFIG_ARM64_64K_PAGES enable and an optimization for HNS driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: hns: use eth_get_headlen interface instead of hns_nic_get_headlenHuazhong Tan
Update hns to drop the hns_nic_get_headlen function in favour of eth_get_headlen, and hence also removes now redundant hns_nic_get_headlen. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: hns: fix skb->truesize underestimationHuazhong Tan
skb->truesize is not meant to be tracking amount of used bytes in a skb, but amount of reserved/consumed bytes in memory. For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment. So skb_add_rx_frag needs to calculate the length of the entire buffer into turesize. Fixes: 9cbe9fd5214e ("net: hns: optimize XGE capability by reducing cpu usage") Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: hns: modify variable type in hns_nic_reuse_pageHuazhong Tan
'truesize' is supposed to be u32, not int, so fix it. Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGESHuazhong Tan
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE is 65536(64K). But the type of length and page_offset are u16, they will overflow. So change them to u32. Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22Merge branch 'tcp_bbr-PROBE_RTT-minor-bug-fixes'David S. Miller
Kevin Yang says: ==================== tcp_bbr: PROBE_RTT minor bug fixes This series includes two minor bug fixes for the TCP BBR PROBE_RTT mechanism, and one preparatory patch: (1) A preparatory patch to reorganize the PROBE_RTT logic by refactoring (into its own function) the code to exit PROBE_RTT, since the next patch will be using that code in a new context. (2) Fix: When BBR restarts from idle and if BBR is in PROBE_RTT mode, BBR should check if it's time to exit PROBE_RTT. If yes, then BBR should exit PROBE_RTT mode and restore the cwnd to its full value. (3) Fix: Apply the PROBE_RTT cwnd cap even if the count of fully-ACKed packets is 0. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22tcp_bbr: apply PROBE_RTT cwnd cap even if acked==0Kevin Yang
This commit fixes a corner case where TCP BBR would enter PROBE_RTT mode but not reduce its cwnd. If a TCP receiver ACKed less than one full segment, the number of delivered/acked packets was 0, so that bbr_set_cwnd() would short-circuit and exit early, without cutting cwnd to the value we want for PROBE_RTT. The fix is to instead make sure that even when 0 full packets are ACKed, we do apply all the appropriate caps, including the cap that applies in PROBE_RTT mode. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22tcp_bbr: in restart from idle, see if we should exit PROBE_RTTKevin Yang
This patch fix the case where BBR does not exit PROBE_RTT mode when it restarts from idle. When BBR restarts from idle and if BBR is in PROBE_RTT mode, BBR should check if it's time to exit PROBE_RTT. If yes, then BBR should exit PROBE_RTT mode and restore the cwnd to its full value. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22tcp_bbr: add bbr_check_probe_rtt_done() helperKevin Yang
This patch add a helper function bbr_check_probe_rtt_done() to 1. check the condition to see if bbr should exit probe_rtt mode; 2. process the logic of exiting probe_rtt mode. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Kevin Yang <yyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22ipv4: tcp: send zero IPID for RST and ACK sent in SYN-RECV and TIME-WAIT stateEric Dumazet
tcp uses per-cpu (and per namespace) sockets (net->ipv4.tcp_sk) internally to send some control packets. 1) RST packets, through tcp_v4_send_reset() 2) ACK packets in SYN-RECV and TIME-WAIT state, through tcp_v4_send_ack() These packets assert IP_DF, and also use the hashed IP ident generator to provide an IPv4 ID number. Geoff Alexander reported this could be used to build off-path attacks. These packets should not be fragmented, since their size is smaller than IPV4_MIN_MTU. Only some tunneled paths could eventually have to fragment, regardless of inner IPID. We really can use zero IPID, to address the flaw, and as a bonus, avoid a couple of atomic operations in ip_idents_reserve() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Geoff Alexander <alexandg@cs.unm.edu> Tested-by: Geoff Alexander <alexandg@cs.unm.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22addrconf: reduce unnecessary atomic allocationsCong Wang
All the 3 callers of addrconf_add_mroute() assert RTNL lock, they don't take any additional lock either, so it is safe to convert it to GFP_KERNEL. Same for sit_add_v4_addrs(). Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net_sched: fix unused variable warning in stmmacArnd Bergmann
The new tcf_exts_for_each_action() macro doesn't reference its arguments when CONFIG_NET_CLS_ACT is disabled, which leads to a harmless warning in at least one driver: drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c: In function 'tc_fill_actions': drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:64:6: error: unused variable 'i' [-Werror=unused-variable] Adding a cast to void lets us avoid this kind of warning. To be on the safe side, do it for all three arguments, not just the one that caused the warning. Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22sch_cake: Fix TC filter flow override and expand it to hosts as wellToke Høiland-Jørgensen
The TC filter flow mapping override completely skipped the call to cake_hash(); however that meant that the internal state was not being updated, which ultimately leads to deadlocks in some configurations. Fix that by passing the overridden flow ID into cake_hash() instead so it can react appropriately. In addition, the major number of the class ID can now be set to override the host mapping in host isolation mode. If both host and flow are overridden (or if the respective modes are disabled), flow dissection and hashing will be skipped entirely; otherwise, the hashing will be kept for the portions that are not set by the filter. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net/ncsi: Fixup .dumpit message flags and ID check in Netlink handlerSamuel Mendoza-Jonas
The ncsi_pkg_info_all_nl() .dumpit handler is missing the NLM_F_MULTI flag, causing additional package information after the first to be lost. Also fixup a sanity check in ncsi_write_package_info() to reject out of range package IDs. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22net: ethernet: renesas: use SPDX identifier for Renesas driversWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-23powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid.Aneesh Kumar K.V
When splitting a huge pmd pte, we need to mark the pmd entry invalid. We can do that by clearing _PAGE_PRESENT bit. But then that will be taken as a swap pte. In order to differentiate between the two use a software pte bit when invalidating. For regular pte, due to bd5050e38aec ("powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang") we need to mark the pte entry invalid when relaxing access permission. Instead of marking pte_none which can result in different page table walk routines possibly skipping this pte entry, invalidate it but still keep it marked present. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-23powerpc/nohash: fix pte_access_permitted()Christophe Leroy
Commit 5769beaf180a8 ("powerpc/mm: Add proper pte access check helper for other platforms") replaced generic pte_access_permitted() by an arch specific one. The generic one is defined as (pte_present(pte) && (!(write) || pte_write(pte))) The arch specific one is open coded checking that _PAGE_USER and _PAGE_WRITE (_PAGE_RW) flags are set, but lacking to check that _PAGE_RO and _PAGE_PRIVILEGED are unset, leading to a useless test on targets like the 8xx which defines _PAGE_RW and _PAGE_USER as 0. Commit 5fa5b16be5b31 ("powerpc/mm/hugetlb: Use pte_access_permitted for hugetlb access check") replaced some tests performed with pte helpers by a call to pte_access_permitted(), leading to the same issue. This patch rewrites powerpc/nohash pte_access_permitted() using pte helpers. Fixes: 5769beaf180a8 ("powerpc/mm: Add proper pte access check helper for other platforms") Fixes: 5fa5b16be5b31 ("powerpc/mm/hugetlb: Use pte_access_permitted for hugetlb access check") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-22apparmor: remove no-op permission check in policy_unpackJohn Johansen
The patch 736ec752d95e: "AppArmor: policy routines for loading and unpacking policy" from Jul 29, 2010, leads to the following static checker warning: security/apparmor/policy_unpack.c:410 verify_accept() warn: bitwise AND condition is false here security/apparmor/policy_unpack.c:413 verify_accept() warn: bitwise AND condition is false here security/apparmor/policy_unpack.c 392 #define DFA_VALID_PERM_MASK 0xffffffff 393 #define DFA_VALID_PERM2_MASK 0xffffffff 394 395 /** 396 * verify_accept - verify the accept tables of a dfa 397 * @dfa: dfa to verify accept tables of (NOT NULL) 398 * @flags: flags governing dfa 399 * 400 * Returns: 1 if valid accept tables else 0 if error 401 */ 402 static bool verify_accept(struct aa_dfa *dfa, int flags) 403 { 404 int i; 405 406 /* verify accept permissions */ 407 for (i = 0; i < dfa->tables[YYTD_ID_ACCEPT]->td_lolen; i++) { 408 int mode = ACCEPT_TABLE(dfa)[i]; 409 410 if (mode & ~DFA_VALID_PERM_MASK) 411 return 0; 412 413 if (ACCEPT_TABLE2(dfa)[i] & ~DFA_VALID_PERM2_MASK) 414 return 0; fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
2018-08-23Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Fixes for 4.19: - Fix build when KCOV is enabled - Misc display fixes - A couple of SR-IOV fixes - Fence fixes for eviction handling for KFD - Misc other fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822203813.2733-1-alexander.deucher@amd.com
2018-08-23Merge tag 'drm-misc-next-fixes-2018-08-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Add an unprepare delay to the tv123wam panel (Sean) - Update seanpaul's email in MAINTAINERS (Sean) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180822193850.GA214158@art_vandelay
2018-08-22x86/mm/tlb: Revert the recent lazy TLB patchesPeter Zijlstra
Revert commits: 95b0e6357d3e x86/mm/tlb: Always use lazy TLB mode 64482aafe55f x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs ac0315896970 x86/mm/tlb: Make lazy TLB mode lazier 61d0beb5796a x86/mm/tlb: Restructure switch_mm_irqs_off() 2ff6ddf19c0e x86/mm/tlb: Leave lazy TLB mode at page table free time In order to simplify the TLB invalidate fixes for x86 and unify the parts that need backporting. We'll try again later. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@surriel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22include/linux/compiler*.h: make compiler-*.h mutually exclusiveNick Desaulniers
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") recently exposed a brittle part of the build for supporting non-gcc compilers. Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and __GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't added compiler specific checks for __clang__ or __INTEL_COMPILER. This is brittle, as they happened to get compatibility by posing as a certain version of GCC. This broke when upgrading the minimal version of GCC required to build the kernel, to a version above what ICC and Clang claim to be. Rather than always including compiler-gcc.h then undefining or redefining macros in compiler-intel.h or compiler-clang.h, let's separate out the compiler specific macro definitions into mutually exclusive headers, do more proper compiler detection, and keep shared definitions in compiler_types.h. Fixes: cafa0010cd51 ("Raise the minimum required gcc version to 4.6") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Eli Friedman <efriedma@codeaurora.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22sunrpc: Add comment defining gssd upcall API keywordsChuck Lever
During review, it was found that the target, service, and srchost keywords are easily conflated. Add an explainer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22nfsd: Remove callback_credChuck Lever
Clean up: The global callback_cred is no longer used, so it can be removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22nfsd: Use correct credential for NFSv4.0 callback with GSSChuck Lever
I've had trouble when operating a multi-homed Linux NFS server with Kerberos using NFSv4.0. Lately, I've seen my clients reporting this (and then hanging): May 9 11:43:26 manet kernel: NFS: NFSv4 callback contains invalid cred The client-side commit f11b2a1cfbf5 ("nfs4: copy acceptor name from context to nfs_client") appears to be related, but I suspect this problem has been going on for some time before that. RFC 7530 Section 3.3.3 says: > For Kerberos V5, nfs/hostname would be a server principal in the > Kerberos Key Distribution Center database. This is the same > principal the client acquired a GSS-API context for when it issued > the SETCLIENTID operation ... In other words, an NFSv4.0 client expects that the server will use the same GSS principal for callback that the client used to establish its lease. For example, if the client used the service principal "nfs@server.domain" to establish its lease, the server is required to use "nfs@server.domain" when performing NFSv4.0 callback operations. The Linux NFS server currently does not. It uses a common service principal for all callback connections. Sometimes this works as expected, and other times -- for example, when the server is accessible via multiple hostnames -- it won't work at all. This patch scrapes the target name from the client credential, and uses that for the NFSv4.0 callback credential. That should be correct much more often. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22sunrpc: Extract target name into svc_credChuck Lever
NFSv4.0 callback needs to know the GSS target name the client used when it established its lease. That information is available from the GSS context created by gssproxy. Make it available in each svc_cred. Note this will also give us access to the real target service principal name (which is typically "nfs", but spec does not require that). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22sunrpc: Enable the kernel to specify the hostname part of service principalsChuck Lever
A multi-homed NFS server may have more than one "nfs" key in its keytab. Enable the kernel to pick the key it wants as a machine credential when establishing a GSS context. This is useful for GSS-protected NFSv4.0 callbacks, which are required by RFC 7530 S3.3.3 to use the same principal as the service principal the client used when establishing its lease. A complementary modification to rpc.gssd is required to fully enable this feature. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22sunrpc: Don't use stack buffer with scatterlistLaura Abbott
Fedora got a bug report from NFS: kernel BUG at include/linux/scatterlist.h:143! ... RIP: 0010:sg_init_one+0x7d/0x90 .. make_checksum+0x4e7/0x760 [rpcsec_gss_krb5] gss_get_mic_kerberos+0x26e/0x310 [rpcsec_gss_krb5] gss_marshal+0x126/0x1a0 [auth_rpcgss] ? __local_bh_enable_ip+0x80/0xe0 ? call_transmit_status+0x1d0/0x1d0 [sunrpc] call_transmit+0x137/0x230 [sunrpc] __rpc_execute+0x9b/0x490 [sunrpc] rpc_run_task+0x119/0x150 [sunrpc] nfs4_run_exchange_id+0x1bd/0x250 [nfsv4] _nfs4_proc_exchange_id+0x2d/0x490 [nfsv4] nfs41_discover_server_trunking+0x1c/0xa0 [nfsv4] nfs4_discover_server_trunking+0x80/0x270 [nfsv4] nfs4_init_client+0x16e/0x240 [nfsv4] ? nfs_get_client+0x4c9/0x5d0 [nfs] ? _raw_spin_unlock+0x24/0x30 ? nfs_get_client+0x4c9/0x5d0 [nfs] nfs4_set_client+0xb2/0x100 [nfsv4] nfs4_create_server+0xff/0x290 [nfsv4] nfs4_remote_mount+0x28/0x50 [nfsv4] mount_fs+0x3b/0x16a vfs_kern_mount.part.35+0x54/0x160 nfs_do_root_mount+0x7f/0xc0 [nfsv4] nfs4_try_mount+0x43/0x70 [nfsv4] ? get_nfs_version+0x21/0x80 [nfs] nfs_fs_mount+0x789/0xbf0 [nfs] ? pcpu_alloc+0x6ca/0x7e0 ? nfs_clone_super+0x70/0x70 [nfs] ? nfs_parse_mount_options+0xb40/0xb40 [nfs] mount_fs+0x3b/0x16a vfs_kern_mount.part.35+0x54/0x160 do_mount+0x1fd/0xd50 ksys_mount+0xba/0xd0 __x64_sys_mount+0x21/0x30 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is BUG_ON(!virt_addr_valid(buf)) triggered by using a stack allocated buffer with a scatterlist. Convert the buffer for rc4salt to be dynamically allocated instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1615258 Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22Merge tag 'platform-drivers-x86-v4.19-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. - Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. - ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. - ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. - Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. * tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits) platform/x86: acer-wmi: Silence "unsupported" message a bit platform/x86: intel_punit_ipc: fix build errors platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360 platform/x86: acer-wmi: refactor function has_cap platform/x86: thinkpad_acpi: Fix multi-battery bug platform/x86: thinkpad_acpi: extend battery quirk coverage platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init() platform/x86: mlx-platform: Remove unused define platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems platform/x86: mlx-platform: Add ASIC hotplug device configuration platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery platform/x86: mlx-platform: Add mlxreg-fan platform driver activation platform/x86: dell-laptop: Fix backlight detection platform/x86: toshiba_acpi: Fix defined but not used build warnings platform/x86: thinkpad_acpi: Support battery quirk ...
2018-08-22ia64: Fix allnoconfig section mismatch for ioc_init/ioc_iommu_infoTony Luck
This has been broken for an embarassingly long time (since v4.4). Just needs a couple of __init tags on functions to make the sections match up. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22blk-wbt: fix has-sleeper queueing checkJens Axboe
We need to do this inside the loop as well, or we can allow new IO to supersede previous IO. Tested-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22blk-wbt: use wq_has_sleeper() for wq active checkJens Axboe
We need the memory barrier before checking the list head, use the appropriate helper for this. The matching queue side memory barrier is provided by set_current_state(). Tested-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22blk-wbt: move disable check into get_limit()Jens Axboe
Check it in one place, instead of in multiple places. Tested-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22Merge branch 'parisc-4.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - fix boot failure of 64-bit kernel. It got broken by the unwind optimization commit in merge window. - fix 64-bit userspace support (static 64-bit applications only, e.g. we don't yet have 64-bit userspace support in glibc). - consolidate unwind initialization code. - add machine model description to stack trace. * 'parisc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add hardware description to stack traces parisc: Fix boot failure of 64-bit kernel parisc: Consolidate unwind initialization calls parisc: Update comments in syscall.S regarding wide userland parisc: Fix ptraced 64-bit applications to call 64-bit syscalls parisc: Restore possibility to execute 64-bit applications
2018-08-22bcache: release dc->writeback_lock properly in bch_writeback_thread()Shan Hai
The writeback thread would exit with a lock held when the cache device is detached via sysfs interface, fix it by releasing the held lock before exiting the while-loop. Fixes: fadd94e05c02 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set) Signed-off-by: Shan Hai <shan.hai@oracle.com> Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Cc: stable@vger.kernel.org #4.17+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22Merge tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa updates from Max Filippov: - switch xtensa arch to the generic noncoherent direct mapping operations - add support for DMA_ATTR_NO_KERNEL_MAPPING attribute - clean up users of platform/hardware.h in generic Xtensa code - fix assembly cache maintenance code for long cache lines - rework noMMU cache attributes initialization - add big-endian HiFi2 test_kc705_be CPU variant * tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: add test_kc705_be variant xtensa: clean up boot-elf/bootstrap.S xtensa: make bootparam parsing optional xtensa: drop variant IRQ support xtensa: drop unneeded platform/hardware.h headers xtensa: move PLATFORM_NR_IRQS to Kconfig xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE xtensa: rework noMMU cache attributes initialization xtensa: increase ranges in ___invalidate_{i,d}cache_all xtensa: limit offsets in __loop_cache_{all,page} xtensa: platform-specific handling of coherent memory xtensa: support DMA_ATTR_NO_KERNEL_MAPPING attribute xtensa: use generic dma_noncoherent_ops
2018-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull second set of KVM updates from Paolo Bonzini: "ARM: - Support for Group0 interrupts in guests - Cache management optimizations for ARMv8.4 systems - Userspace interface for RAS - Fault path optimization - Emulated physical timer fixes - Random cleanups x86: - fixes for L1TF - a new test case - non-support for SGX (inject the right exception in the guest) - fix lockdep false positive" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits) KVM: VMX: fixes for vmentry_l1d_flush module parameter kvm: selftest: add dirty logging test kvm: selftest: pass in extra memory when create vm kvm: selftest: include the tools headers kvm: selftest: unify the guest port macros tools: introduce test_and_clear_bit KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled KVM: vmx: Inject #UD for SGX ENCLS instruction in guest KVM: vmx: Add defines for SGX ENCLS exiting x86/kvm/vmx: Fix coding style in vmx_setup_l1d_flush() x86: kvm: avoid unused variable warning KVM: Documentation: rename the capability of KVM_CAP_ARM_SET_SERROR_ESR KVM: arm/arm64: Skip updating PTE entry if no change KVM: arm/arm64: Skip updating PMD entry if no change KVM: arm: Use true and false for boolean values KVM: arm/arm64: vgic: Do not use spin_lock_irqsave/restore with irq disabled KVM: arm/arm64: vgic: Move DEBUG_SPINLOCK_BUG_ON to vgic.h KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses KVM: arm64: vgic-v3: Add support for ICC_SGI0R_EL1 and ICC_ASGI1R_EL1 accesses KVM: arm/arm64: vgic-v3: Add core support for Group0 SGIs ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:24:48 +0000