summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-24tools/kvm_stat: simplify the sortkey functionMarc Hartmayer
The 'sortkey' function references a value in its enclosing scope (closure). This is not common practice for a sort key function so let's replace it. Additionally, the function 'sorted' has already a parameter for reversing the result therefore the inversion of the values is unneeded. The check for stats[x][1] is also superfluous as it's ensured that this value is initialized with 0. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: X86: Fix SMRAM accessing even if VM is shutdownWanpeng Li
Reported by syzkaller: WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel] CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4 RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel] Call Trace: vmx_handle_exit+0xbd/0xe20 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm] kvm_vcpu_ioctl+0x3e9/0x720 [kvm] do_vfs_ioctl+0xa4/0x6a0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x25/0x9c The testcase creates a first thread to issue KVM_SMI ioctl, and then creates a second thread to mmap and operate on the same vCPU. This triggers a race condition when running the testcase with multiple threads. Sometimes one thread exits with a triple fault while another thread mmaps and operates on the same vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE in kvm_handle_bad_page(), which will go on to cause an emulation failure and an exit with KVM_EXIT_INTERNAL_ERROR. Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: nVMX: Don't halt vcpu when L1 is injecting events to L2Chao Gao
Although L2 is in halt state, it will be in the active state after VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity State. Halting the vcpu here means the event won't be injected to L2 and this decision isn't reported to L1. Thus L0 drops an event that should be injected to L2. Cc: Liran Alon <liran.alon@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Chao Gao <chao.gao@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24KVM: mmu: Fix overlap between public and private memslotsWanpeng Li
Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <signal.h> #include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> #include <linux/kvm.h> long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> --- virt/kvm/kvm_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
2018-02-24KVM/x86: remove WARN_ON() for when vm_munmap() failsEric Biggers
On x86, special KVM memslots such as the TSS region have anonymous memory mappings created on behalf of userspace, and these mappings are removed when the VM is destroyed. It is however possible for removing these mappings via vm_munmap() to fail. This can most easily happen if the thread receives SIGKILL while it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)' in __x86_set_memory_region(). syzkaller was able to hit this, using 'exit()' to send the SIGKILL. Note that while the vm_munmap() failure results in the mapping not being removed immediately, it is not leaked forever but rather will be freed when the process exits. It's not really possible to handle this failure properly, so almost every other caller of vm_munmap() doesn't check the return value. It's a limitation of having the kernel manage these mappings rather than userspace. So just remove the WARN_ON() so that users can't spam the kernel log with this warning. Fixes: f0d648bdf0a5 ("KVM: x86: map/unmap private slots in __x86_set_memory_region") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-24KVM: nVMX: preserve SECONDARY_EXEC_DESC without UMIPRadim Krčmář
L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS bit if UMIP is not being emulated. We must still set the bit when emulating UMIP as the feature can be passed to L2 where L0 will do the emulation and because L2 can change CR4 without a VM exit, we should clear the bit if UMIP is disabled. Fixes: 0367f205a3b7 ("KVM: vmx: add support for emulating UMIP") Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-24KVM: x86: move LAPIC initialization after VMCS creationPaolo Bonzini
The initial reset of the local APIC is performed before the VMCS has been created, but it tries to do a vmwrite: vmwrite error: reg 810 value 4a00 (err 18944) CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1 Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014 Call Trace: vmx_set_rvi [kvm_intel] vmx_hwapic_irr_update [kvm_intel] kvm_lapic_reset [kvm] kvm_create_lapic [kvm] kvm_arch_vcpu_init [kvm] kvm_vcpu_init [kvm] vmx_create_vcpu [kvm_intel] kvm_vm_ioctl [kvm] Move it later, after the VMCS has been created. Fixes: 4191db26b714 ("KVM: x86: Update APICv on APIC reset") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
2018-02-23Merge branch 'fixes-v4.16-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
2018-02-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and perf fixes: - build error when accessing MPIDR_HWID_BITMASK from .S - fix CTR_EL0 field definitions - remove/disable some kernel messages on user faults (unhandled signals, unimplemented syscalls) - fix kernel page fault in unwind_frame() with function graph tracing - fix perf sleeping while atomic errors when booting with ACPI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix unwind_frame() for filtered out fn for function graph tracing arm64: Enforce BBM for huge IO/VMAP mappings arm64: perf: correct PMUVer probing arm_pmu: acpi: request IRQs up-front arm_pmu: note IRQs and PMUs per-cpu arm_pmu: explicitly enable/disable SPIs at hotplug arm_pmu: acpi: check for mismatched PPIs arm_pmu: add armpmu_alloc_atomic() arm_pmu: fold platform helpers into platform code arm_pmu: kill arm_pmu_platdata ARM: ux500: remove PMU IRQ bouncer arm64: __show_regs: Only resolve kernel symbols when running at EL1 arm64: Remove unimplemented syscall log message arm64: Disable unhandled signal log messages by default arm64: cpufeature: Fix CTR_EL0 field definitions arm64: uaccess: Formalise types for access_ok() arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
2018-02-23Merge tag 'mips_fixes_4.16_3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
2018-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fixlet from Petr Mladek: "People expect to see the real pointer value for %px. Let's substitute '(null)' only for the other %p? format modifiers that need to deference the pointer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: avoid misleading "(null)" for %px
2018-02-23Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two bugfixes, one v4.16 regression fix, and two documentation fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Consider SCL GPIO optional i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula". i2c: bcm2835: Set up the rising/falling edge delays i2c: i801: Add missing documentation entries for Braswell and Kaby Lake i2c: designware: must wait for enable
2018-02-23block: pass inclusive 'lend' parameter to truncate_inode_pages_rangeMing Lei
The 'lend' parameter of truncate_inode_pages_range is required to be inclusive, so follow the rule. This patch fixes one memory corruption triggered by discard. Cc: <stable@vger.kernel.org> Cc: Dmitry Monakhov <dmonakhov@openvz.org> Fixes: 351499a172c0 ("block: Invalidate cache on discard v2") Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-23Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These are mostly fixes for problems with merge window code. In addition we have one doc update (alua) and two dead code removals (aiclib and octogon) a spurious assignment removal (csiostor) and a performance improvement for storvsc involving better interrupt spreading and increasing the command per lun handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla4xxx: skip error recovery in case of register disconnect. scsi: aacraid: fix shutdown crash when init fails scsi: qedi: Cleanup local str variable scsi: qedi: Fix truncation of CHAP name and secret scsi: qla2xxx: Fix incorrect handle for abort IOCB scsi: qla2xxx: Fix double free bug after firmware timeout scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els() scsi: scsi_dh: Document alua_rtpg_queue() arguments scsi: Remove Makefile entry for oktagon files scsi: aic7xxx: remove aiclib.c scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: csiostor: remove redundant assignment to pointer 'ln' scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info scsi: qla2xxx: Fix memory corruption during hba reset test scsi: mpt3sas: fix an out of bound write
2018-02-23memory: brcmstb: dpfe: support new way of passing data from the DCPUMarkus Mayer
The DCPU can now send message data in two ways: - via the data RAM, as before (this is now message type 0) - via the message RAM (this is message type 1) In order to support both methods, we check the message type of the response (bits 31:28) and then treat the offset (bits 27:0) accordingly. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23memory: brcmstb: dpfe: fix type declaration of variable "ret"Markus Mayer
In some functions, variable "ret" should be ssize_t, so we fix it. Fixes: 2f330caff577 ("memory: brcmstb: Add driver for DPFE") Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23memory: brcmstb: dpfe: properly mask vendor error bitsMarkus Mayer
We were printing the entire 32 bit register rather than just the lower 8 bits. Anything above bit 7 is reserved and may be any random value. Fixes: 2f330caff577 ("memory: brcmstb: Add driver for DPFE") Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-02-23Merge tag 'drm-fixes-for-v4.16-rc3' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes for rc3: Exynos: - fixes for using monotonic timestamps - register definitions - removal of unused file ipu-v3L - minor changes - make some register arrays const+static - fix some leaks meson: - fix for vsync atomic: - fix for memory leak EDID parser: - add quirks for some more non-desktop devices - 6-bit panel fix. drm_mm: - fix a bug in the core drm mm hole handling cirrus: - fix lut loading regression Lastly there is a deadlock fix around runtime suspend for secondary GPUs. There was a deadlock between one thread trying to wait for a workqueue job to finish in the runtime suspend path, and the workqueue job it was waiting for in turn waiting for a runtime_get_sync to return. The fixes avoids it by not doing the runtime sync in the workqueue as then we always wait for all those tasks to complete before we runtime suspend" * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tve200: fix kernel-doc documentation comment include drm/edid: quirk Sony PlayStation VR headset as non-desktop drm/edid: quirk Windows Mixed Reality headsets as non-desktop drm/edid: quirk Oculus Rift headsets as non-desktop drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker ...
2018-02-23Merge tag 'kvm-s390-master-4.16-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: fixes for multiple epoch facility We have certain cases where the multiple epoch facility is broken: - timer wakeup during epoch change - cpu hotplug - SCK instruction - stp sync checks Fix those.
2018-02-23Merge tag 'kvm-arm-fixes-for-v4.16-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Fixes for v4.16, Round 1 Fix the interaction of userspace irqchip VMs with in-kernl irqchip VMs and make sure we can build 32-bit KVM/ARM with gcc-8.
2018-02-23net_sched: gen_estimator: fix broken estimators based on percpu statsEric Dumazet
pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2018-02-22 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel. 2) cond_resched points in percpu array alloc/free paths, from Eric. 3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23gianfar: simplify FCS handling and fix memory leakAndy Spencer
Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: Jim Gruen <jgruen@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23media: Don't let tvp5150_get_vbi() go out of vbi_ram_default arrayMauro Carvalho Chehab
As pointed by Dan, possible values for bits[3:0] of te Line Mode Registers can range from 0x0 to 0xf, but the check logic allow values ranging from 0x0 to 0xe. As static arrays are initialized with zero, using a value without an explicit initializer at the array won't cause any harm. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dvb: update buffer mmaped flags and frame counterMauro Carvalho Chehab
Now that we have support for a buffer counter and for error flags, update them at DMX_DQBUF. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann
gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23macvlan: fix use-after-free in macvlan_common_newlink()Alexey Kodanev
The following use-after-free was reported by KASan when running LTP macvtap01 test on 4.16-rc2: [10642.528443] BUG: KASAN: use-after-free in macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450 ... [10642.963873] Call Trace: [10642.994352] dump_stack+0x5c/0x7c [10643.035325] print_address_description+0x75/0x290 [10643.092938] kasan_report+0x28d/0x390 [10643.137971] ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.207963] macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.275978] macvtap_newlink+0x171/0x260 [macvtap] [10643.334532] rtnl_newlink+0xd4f/0x1300 ... [10646.256176] Allocated by task 18450: [10646.299964] kasan_kmalloc+0xa6/0xd0 [10646.343746] kmem_cache_alloc_trace+0xf1/0x210 [10646.397826] macvlan_common_newlink+0x6de/0x14a0 [macvlan] [10646.464386] macvtap_newlink+0x171/0x260 [macvtap] [10646.522728] rtnl_newlink+0xd4f/0x1300 ... [10647.022028] Freed by task 18450: [10647.061549] __kasan_slab_free+0x138/0x180 [10647.111468] kfree+0x9e/0x1c0 [10647.147869] macvlan_port_destroy+0x3db/0x650 [macvlan] [10647.211411] rollback_registered_many+0x5b9/0xb10 [10647.268715] rollback_registered+0xd9/0x190 [10647.319675] register_netdevice+0x8eb/0xc70 [10647.370635] macvlan_common_newlink+0xe58/0x14a0 [macvlan] [10647.437195] macvtap_newlink+0x171/0x260 [macvtap] Commit d02fd6e7d293 ("macvlan: Fix one possible double free") handles the case when register_netdevice() invokes ndo_uninit() on error and as a result free the port. But 'macvlan_port_get_rtnl(dev))' check (returns dev->rx_handler_data), which was added by this commit in order to prevent double free, is not quite correct: * for macvlan it always returns NULL because 'lowerdev' is the one that was used to register rx handler (port) in macvlan_port_create() as well as to unregister it in macvlan_port_destroy(). * for macvtap it always returns a valid pointer because macvtap registers its own rx handler before macvlan_common_newlink(). Fixes: d02fd6e7d293 ("macvlan: Fix one possible double free") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23arm64: fix unwind_frame() for filtered out fn for function graph tracingPratyush Anand
do_task_stat() calls get_wchan(), which further does unwind_frame(). unwind_frame() restores frame->pc to original value in case function graph tracer has modified a return address (LR) in a stack frame to hook a function return. However, if function graph tracer has hit a filtered function, then we can't unwind it as ftrace_push_return_trace() has biased the index(frame->graph) with a 'huge negative' offset(-FTRACE_NOTRACE_DEPTH). Moreover, arm64 stack walker defines index(frame->graph) as unsigned int, which can not compare a -ve number. Similar problem we can have with calling of walk_stackframe() from save_stack_trace_tsk() or dump_backtrace(). This patch fixes unwind_frame() to test the index for -ve value and restore index accordingly before we can restore frame->pc. Reproducer: cd /sys/kernel/debug/tracing/ echo schedule > set_graph_notrace echo 1 > options/display-graph echo wakeup > current_tracer ps -ef | grep -i agent Above commands result in: Unable to handle kernel paging request at virtual address ffff801bd3d1e000 pgd = ffff8003cbe97c00 [ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000006 [#1] SMP [...] CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33 [...] task: ffff8003c21ba000 task.stack: ffff8003cc6c0000 PC is at unwind_frame+0x12c/0x180 LR is at get_wchan+0xd4/0x134 pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145 sp : ffff8003cc6c3ab0 x29: ffff8003cc6c3ab0 x28: 0000000000000001 x27: 0000000000000026 x26: 0000000000000026 x25: 00000000000012d8 x24: 0000000000000000 x23: ffff8003c1c04000 x22: ffff000008c83000 x21: ffff8003c1c00000 x20: 000000000000000f x19: ffff8003c1bc0000 x18: 0000fffffc593690 x17: 0000000000000000 x16: 0000000000000001 x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f x13: 0000000000000001 x12: 0000000000000000 x11: 00000000e8f4883e x10: 0000000154f47ec8 x9 : 0000000070f367c0 x8 : 0000000000000000 x7 : 00008003f7290000 x6 : 0000000000000018 x5 : 0000000000000000 x4 : ffff8003c1c03cb0 x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000 x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000 Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000) Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000) [...] [<ffff00000808892c>] unwind_frame+0x12c/0x180 [<ffff000008305008>] do_task_stat+0x864/0x870 [<ffff000008305c44>] proc_tgid_stat+0x3c/0x48 [<ffff0000082fde0c>] proc_single_show+0x5c/0xb8 [<ffff0000082b27e0>] seq_read+0x160/0x414 [<ffff000008289e6c>] __vfs_read+0x58/0x164 [<ffff00000828b164>] vfs_read+0x88/0x144 [<ffff00000828c2e8>] SyS_read+0x60/0xc0 [<ffff0000080834a0>] __sys_trace_return+0x0/0x4 Fixes: 20380bb390a4 (arm64: ftrace: fix a stack tracer's output under function graph tracer) Signed-off-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Jerome Marchand <jmarchan@redhat.com> [catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-23drm/nouveau: prefer XBGR2101010 for addfb ioctlIlia Mirkin
Nouveau only exposes support for XBGR2101010. Prior to the atomic conversion, drm would pass in the wrong format in the framebuffer, but it was always ignored -- both userspace (xf86-video-nouveau) and the kernel driver agreed on the layout, so the fact that the format was wrong didn't matter. With the atomic conversion, nouveau all of a sudden started caring about the exact format, and so the previously-working code in xf86-video-nouveau no longer functioned since the (internally-assigned) format from the addfb ioctl was wrong. This change adds infrastructure to allow a drm driver to specify that it prefers the XBGR format variant for the addfb ioctl, and makes nouveau's nv50 display driver set it. (Prior gens had no support for 30bpp at all.) Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org # v4.10+ Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180203191123.31507-1-imirkin@alum.mit.edu
2018-02-23EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNLAnna Karbownik
Commit 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4") decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights Landing which supports up to 6 channels. This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm variables which don't pay critical role on KNL code path, so the memory corruption wasn't causing any visible driver failures. The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that. An alternative solution would be to restructure the KNL part of the driver to 2MC/3channel representation. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anna Karbownik <anna.karbownik@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: jim.m.snow@intel.com Cc: krzysztof.paliswiat@intel.com Cc: lukasz.odzioba@intel.com Cc: qiuxu.zhuo@intel.com Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Fixes: 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4") Link: http://lkml.kernel.org/r/1519312693-4789-1-git-send-email-anna.karbownik@intel.com [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-02-23media: dvb: add continuity error indicators for memory mapped buffersMauro Carvalho Chehab
While userspace can detect discontinuity errors, it is useful to also let Kernelspace reporting discontinuity, as it can help to identify if the data loss happened either at Kernel or userspace side. Update documentation accordingly. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dmxdev: Fix the logic that enables DMA mmap supportMauro Carvalho Chehab
Some conditions required for DVB mmap support to work are reversed. Also, the logic is not too clear. So, improve the logic, making it easier to be handled. PS.: I'm pretty sure that I fixed it while testing, but, somehow, the change got lost. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dmxdev: fix error code for invalid ioctlsMauro Carvalho Chehab
Returning -EINVAL when an ioctl is not implemented is a very bad idea, as it is hard to distinguish from other error contitions that an ioctl could lead. Replace it by its right error code: -ENOTTY. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: m88ds3103: don't call a non-initalized functionMauro Carvalho Chehab
If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: au0828: add VIDEO_V4L2 dependencyArnd Bergmann
After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! This adds the same dependency in au0828 that the other users of videobuf2 have. Fixes: 03fbdb2fc2b8 ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a3693 ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dvb: fix DVB_MMAP dependencyArnd Bergmann
Enabling CONFIG_DVB_MMAP without CONFIG_VIDEOBUF2_VMALLOC results in a link error: drivers/media/dvb-core/dvb_vb2.o: In function `_stop_streaming': dvb_vb2.c:(.text+0x894): undefined reference to `vb2_buffer_done' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_init': dvb_vb2.c:(.text+0xbec): undefined reference to `vb2_vmalloc_memops' dvb_vb2.c:(.text+0xc4c): undefined reference to `vb2_core_queue_init' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_release': dvb_vb2.c:(.text+0xe14): undefined reference to `vb2_core_queue_release' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_stream_on': dvb_vb2.c:(.text+0xeb8): undefined reference to `vb2_core_streamon' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_stream_off': dvb_vb2.c:(.text+0xfe8): undefined reference to `vb2_core_streamoff' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_fill_buffer': dvb_vb2.c:(.text+0x13ec): undefined reference to `vb2_plane_vaddr' dvb_vb2.c:(.text+0x149c): undefined reference to `vb2_buffer_done' This adds a 'select' statement for it, plus a dependency that ensures that videobuf2 in turn works, as it in turn depends on VIDEO_V4L2 to link, and that must not be a module if videobuf2 is built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: dvb: fix DVB_MMAP symbol nameArnd Bergmann
CONFIG_DVB_MMAP was misspelled either as CONFIG_DVB_MMSP or DVB_MMAP, so it had no effect at all. This fixes that, to make it possible to build it again. Fixes: 4021053ed52d ("media: dvb-core: make DVB mmap API optional") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: videobuf2: fix build issues with vb2-traceMauro Carvalho Chehab
There was a trouble with vb2-trace: instead of being part of VB2 core, it was stored at V4L2 videodev. That was wrong, as it doesn't actually belong to V4L2 core. Now that vb2 is not part of v4l2-core, its trace functions should be moved altogether. So, move it to its rightful place: at videobuf2-core. That fixes those errors: drivers/media/common/videobuf2/videobuf2-core.o: In function `__read_once_size': ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x10): undefined reference to `__tracepoint_vb2_buf_queue' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x28): undefined reference to `__tracepoint_vb2_buf_done' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x40): undefined reference to `__tracepoint_vb2_qbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x58): undefined reference to `__tracepoint_vb2_dqbuf' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 partSakari Ailus
Videobuf2 is now separate from V4L2 and can be now built without it, at least in principle --- enabling videobuf2 in kernel configuration attempts to compile videobuf2-v4l2.c but that will fail if CONFIG_VIDEO_V4L2 isn't enabled. Solve this by adding a separate Kconfig option for videobuf2-v4l2 and make it a separate module as well. This means that drivers now need to choose both the appropriate videobuf2 memory type (VIDEOBUF2_{VMALLOC,DMA_CONTIG,DMA_SG}) and VIDEOBUF2_V4L2 if they need both. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across ↵Samuel Neves
CPU hotplug operations Without this fix, /proc/cpuinfo will display an incorrect amount of CPU cores, after bringing them offline and online again, as exemplified below: $ cat /proc/cpuinfo | grep cores cpu cores : 4 cpu cores : 8 cpu cores : 8 cpu cores : 20 cpu cores : 4 cpu cores : 3 cpu cores : 2 cpu cores : 2 This patch fixes this by always zeroing the booted_cores variable upon turning off a logical CPU. Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jgross@suse.com Cc: luto@kernel.org Cc: prarit@redhat.com Cc: vkuznets@redhat.com Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/topology: Fix function name in documentationDou Liyang
topology_sibling_cpumask() is the correct thread-related topology function in the kernel: s/topology_sibling_mask/topology_sibling_cpumask Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20180222084812.14497-1-douly.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugsAndrea Parri
Successful RMW operations are supposed to be fully ordered, but Alpha's xchg() and cmpxchg() do not meet this requirement. Will Deacon noticed the bug: > So MP using xchg: > > WRITE_ONCE(x, 1) > xchg(y, 1) > > smp_load_acquire(y) == 1 > READ_ONCE(x) == 0 > > would be allowed. ... which thus violates the above requirement. Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of ↵Andrea Parri
__ASM__MB Replace each occurrence of __ASM__MB with a (trailing) smp_mb() in xchg(), cmpxchg(), and remove the now unused __ASM__MB definitions; this improves readability, with no additional synchronization cost. Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1519291469-5702-1-git-send-email-parri.andrea@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR ↵Paolo Bonzini
path as unlikely() vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving branch hints to the compiler can actually make a substantial cycle difference by keeping the fast path contiguous in memory. With this optimization, the retpoline-guest/retpoline-host case is about 50 cycles faster. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23KVM/x86: Remove indirect MSR op calls from SPEC_CTRLPaolo Bonzini
Having a paravirt indirect call in the IBRS restore path is not a good idea, since we are trying to protect from speculative execution of bogus indirect branch targets. It is also slower, so use native_wrmsrl() on the vmentry path too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/intel_rdt: Fix incorrect returned value when creating rdgroup ↵Wang Hui
sub-directory in resctrl file system If no monitoring feature is detected because all monitoring features are disabled during boot time or there is no monitoring feature in hardware, creating rdtgroup sub-directory by "mkdir" command reports error: mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory But the sub-directory actually is generated and content is correct: cpus cpus_list schemata tasks The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after the sub-directory is created and the returned value is reported as an error to user. Clear the returned value to report to user that the sub-directory is actually created successfully. Signed-off-by: Wang Hui <john.wanghui@huawei.com> Signed-off-by: Zhang Yanfei <yanfei.zhang@huawei.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vikas <vikas.shivappa@intel.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/apic/vector: Handle vector release on CPU unplug correctlyThomas Gleixner
When a irq vector is replaced, then the previous vector is normally released when the first interrupt happens on the new vector. If the target CPU of the previous vector is already offline when the new vector is installed, then the previous vector is silently discarded, which leads to accounting issues causing suspend failures and other problems. Adjust the logic so that the previous vector is freed in the underlying matrix allocator to ensure that the accounting stays correct. Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23powerpc/powernv: Support firmware disable of RFI flushMichael Ellerman
Some versions of firmware will have a setting that can be configured to disable the RFI flush, add support for it. Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-23powerpc/pseries: Support firmware disable of RFI flushMichael Ellerman
Some versions of firmware will have a setting that can be configured to disable the RFI flush, add support for it. Fixes: 8989d56878a7 ("powerpc/pseries: Query hypervisor for RFI flush settings") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:31:15 +0000