summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-23ath10k: store msdu_id instead of txbuf pointersMichal Kazior
Txbuf is no longer a DMA pool and can be easily tracked with a mere msdu_id. This saves 10 bytes on 64bit systems and 6 bytes on 32bit systems of precious sk_buff control buffer. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: replace vdev_id and tid in skb cbMichal Kazior
This prepares the driver for future ieee80211_txq and wake_tx_queue() support. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: fix tx header parsingMichal Kazior
Frames are not guaranteed to be 802.11 frames in ath10k_htt_tx() and the tx completion handler. In some cases, like TDLS, they can be Ethernet. Hence checking, e.g. frame_control could yield bogus results and behavior. Fortunately this wasn't a real problem so far because there's no FW/HW combination to encounter this problem. However it is good to fix this in advance. Fixes: 75d85fd9993c ("ath10k: introduce basic tdls functionality") Fixes: eebc67fef3ee ("ath10k: fix pmf for wmi-tlv on qca6174") Fixes: 7b7da0a02192 ("ath10k: drop probe responses when too many are queued") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: pack up flags in skb_cbMichal Kazior
It was wasteful to have all the flags as separate bools. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: remove freq from skb_cbMichal Kazior
It was wasteful to keep it in the struct. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: remove is_offchanMichal Kazior
It was wasteful to keep it in the struct. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: remove txmode from skb_cbMichal Kazior
It was wasteful to keep it in the struct because it can be passed as function argument down the tx path. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: rename function to adhere to naming conventionMichal Kazior
All functions should have ath10k_{filename}_ prefixes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: merge is_protected with nohwcryptMichal Kazior
It was wasteful to have two flags describing the same thing. While at it fix code style of ath10k_tx_h_use_hwcrypto(). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-23ath10k: adjust the RX packet pad offset at QCA99X0 4addr modeYanbo Li
The QCA99X0 4 addresses RX packets pad 2 bytes at the beginning of MSDU instead the end of ieee80211 header to keep alignment. The currently RX data path can't parse the header correctly in this case. This patch fixes it for QCA99X0. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> [kvalo@qca.qualcomm.com: checkpatch fixes and naming changes] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-16wil6210: hold wil->mutex while managing vringsVladimir Kondratiev
To prevent race when connect flow may run in parallel with the disconnect event. Scenario leading to the bug is: while running connect flow on the AP, STA sends disconnect. log follows. <7>[ 668.736269] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Configure for connection CID 1 <7>[ 668.736269] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_init_tx() max_mpdu_size 2048 <7>[ 668.736301] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_alloc() <7>[ 668.736363] wil6210 0000:01:00.0: wlan0: DBG[MISC]vring[1024] 0xffbe8000:d962ce08 0xdb244000 <7>[ 668.736394] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Head 0x00880300 -> 0x00880308 <7>[ 668.736394] wil6210 0000:01:00.0: wlan0: DBG[ WMI]WMI command 0x0821 [28] <7>[ 668.736426] DBG[ WMI]Cmd 00000000: 20 00 24 00 00 00 00 00 00 00 21 08 00 00 00 00 .$.......!..... <7>[ 668.736426] DBG[ WMI]cmd 00000000: 00 00 00 00 00 00 5f 5c 00 00 00 00 00 04 00 08 ......_\........ <7>[ 668.736457] DBG[ WMI]cmd 00000010: 01 01 00 00 00 00 00 00 00 00 ff 0f ............ <7>[ 668.736488] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Pseudo IRQ 0x00000004 <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1824 (reply_id 0x1821) <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]wil6210_mask_irq_pseudo() <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]ISR MISC 0x20000000 <7>[ 668.736551] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1003 (reply_id 0x1821) <7>[ 668.736551] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Disconnect 04:ce:14:00:07:70 reason [proto 3 wmi 4] <7>[ 668.736582] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil6210_disconnect() <7>[ 668.736613] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Thread IRQ <7>[ 668.736613] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Thread ISR MISC 0x20000000 <7>[ 668.736644] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]MBOX event <7>[ 668.736644] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Mbox head 00880330 tail 00880328 <7>[ 668.736676] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Mbox evt 001a 0010 0000 00 <7>[ 668.736676] wil6210 0000:01:00.0: wlan0: DBG[ WMI]WMI event 0x1821 MID 0 @3255145 msec <7>[ 668.736707] DBG[ WMI]evt 00000000: 1a 00 10 00 00 00 00 10 00 00 21 18 69 ab 31 00 ..........!.i.1. <7>[ 668.736707] DBG[ WMI]evt 00000010: 01 01 00 00 00 00 00 00 ........ <7>[ 668.736738] wil6210 0000:01:00.0: wlan0: DBG[ WMI]queue_work -> 0 <7>[ 668.736738] wil6210 0000:01:00.0: wlan0: DBG[ WMI]wmi_recv_cmd -> 1 events queued <7>[ 668.736769] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]wil6210_unmask_irq_pseudo() <7>[ 668.736832] wil6210 0000:01:00.0: wlan0: DBG[MISC]Disconnect 04:ce:14:00:07:70, CID=1, reason=3 <7>[ 668.736832] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_disconnect_cid(CID 1, status 1) <7>[ 668.736894] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_fini_tx() id=1 <7>[ 668.736894] wil6210 0000:01:00.0: wlan0: DBG[MISC]free Tx vring 1 [1024] 0xffbe8000:d962ce08 0xdb244000 <7>[ 668.736957] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1821 (reply_id 0x1821) <7>[ 668.736988] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Complete WMI 0x1821 <7>[ 668.737019] wil6210 0000:01:00.0: wlan0: DBG[ WMI]wmi_call(0x0821->0x1821) completed in 0 msec <3>[ 668.737019] wil6210 0000:01:00.0: wlan0: Tx config failed, status 0x01 <7>[ 668.739518] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_cfg80211_del_station(04:ce:14:00:07:70, reason=2) <7>[ 668.739550] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil6210_disconnect() <7>[ 668.739550] wil6210 0000:01:00.0: wlan0: DBG[MISC]_wil6210_disconnect(bssid=04:ce:14:00:07:70, reason=2, ev-) <7>[ 668.739581] wil6210 0000:01:00.0: wlan0: DBG[MISC]Disconnect 04:ce:14:00:07:70, CID=-2, reason=2 <7>[ 668.742705] wil6210 0000:01:00.0: wlan0: DBG[MISC]free Tx vring 1 [1024] 0x (null):d962ce08 0x (null) <3>[ 668.742736] __dma_free_remap: trying to free invalid coherent area: (null) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-16ath10k: fix the wrong RX rate idx report at 11G modeYanbo Li
The RX rate idx is not correct for 11G mode OFDM packet. Because the bitrate table start with CCK index instead of OFDM. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: fix peerid configuration in htt tx desc for htt version < 3.4Vasanthakumar Thiagarajan
Of a word in struct htt_data_tx_desc htt version >= 3.4 firmware uses LSB 16-bit for frequency configuration which is used for offchannel tx and MSB 16-bit is for peerid. But other firmwares using version 2.X (10.1, 10.2.2, 10.2.4 and 10.4) are using 32-bit for peerid in htt tx desc. So far no issue is found with the existing code setting peerid and freq for HTT version 2.X, this could be mainly because of 0 as frequecy (home channel) is being always passed with those firmwares. There may be issues when non-zero freq is passed with firmware using < 3.4 htt version. To be safe use target_version_major and target_version_minor along with htt-op-version before configuring peer id and freq in htt tx desc. This patch extends ath10k_mac_tx_frm_has_freq() to check for htt_op_version_tlv and uses the helper while setting peerid in htt_tx_desc. Fixes: 8d6d36243610 ("ath10k: fix offchan reliability") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: rename the helper which is used for off-channel txVasanthakumar Thiagarajan
Rename ath10k_mac_need_offchan_tx_work() to ath10k_mac_tx_frm_has_freq() to make it more meaningful. This helper will be used in the future change. No functionality change. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12ath10k: fix peer assoc complete WMI command for 10.4Vasanthakumar Thiagarajan
There is an extra 4-byte member when compared to WMI 10.2 added to assoc complete command in WMI 10.4. This new member is used for 160Mhz related configuration. This WMI command mismatch between host and firmware does not cause any real issues because this new member is not used in 10.4 firmwares so far (10.4.1.00030-1). This difference in WMI command interface brings in a new wmi_ops for 10.4 gen_peer_assoc(). No noticeable functionality differences with this change can be seen with the current 10.4 firmwares, but the WMI interface has to be fixed to work with future 10.4 firmwares which may be using this new member. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: debugfs file to enable Bluetooth coexistence featureYanbo Li
As not all QCA98XX radios are not connected to Bluetooth modules, enabling the BT coex feature in firmware will have side effects if the radio's GPIO are connected with other (non-BT) HW modules. Add debugfs file to control the firmware BT coex logic and set the feature as disable by default to avoid that btcoex is accidentally enabled. To enable this feature, execute: echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex To disable: echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex The firmware support this feature since 10.2.4.54 on 2G-only board, dual band or 5G boards don't support this. The feature's name is WMI_SERVICE_COEX_GPIO and the btcoex file is not created if firmware doesn't support it. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> [kvalo@qca.qualcomm.com: use btcoex filename and other smaller fixes] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add support for pktlog in QCA99X0Vivek Natarajan
This patch adds pktlog support for 10.4 fw versions. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new pdev params defines to 10.4Vasanthakumar Thiagarajan
No functionality change, just sync to the latest pdev params that 10.4 firmware defines. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new WMI cmd/event defines for 10.4Vasanthakumar Thiagarajan
No real functionality change, add WMI command/event defines to be in sync with 10.4 firmware. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add new service defines for 10.4Vasanthakumar Thiagarajan
No functional changes, adds new wmi service bits for 10.4 firmware to be sync with 10.4 firmware. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add thermal throttling support for 10.4 firmwareTamizh chelvam
This patch enables thermal throttling support for 10.4 firmware. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: set peer MFP flag in peer assoc commandTamizh chelvam
Set peer's management frame protection flag in peer assoc command, this setting will enable/disable encrytion of management frames in fw. Setting of this flag is based on whether MFP is enabled/disabled at STA and a firmware feature flag ATH10K_FW_FEATURE_MFP_SUPPORT. This is because only firmwares 10.1.561 and above have support for MFP. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Manikanta pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: add abstraction layer for peer flagsTamizh chelvam
Abstraction layer for peer flags is added to fix ABI breakage. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-04ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rxManikanta Pubbisetty
This patch replaces multiple if conditional checks with a single if condition in WMI management rx handler. Found during code review. Signed-off-by: Manikanta Pubbisetty <manikanta.pubbisetty@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: implement ethtool statsBen Greear
This supports a way to get target stats through normal ethtool stats API. For instance: # ethtool -S wlan1 NIC statistics: tx_pkts_nic: 353 tx_bytes_nic: 25142 rx_pkts_nic: 6 rx_bytes_nic: 996 d_tx_ucast_pkts: 89 d_tx_bcast_pkts: 264 d_tx_ucast_bytes: 3020 d_tx_bcast_bytes: 22122 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: break stats gathering code into separate methodBen Greear
This will allow us to call it from elsewhere when implementing ethtool stats. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: fix firmware version assignmentBen Greear
Improper use of strlcpy caused garbage to be appended to the firmware version string. Fix this by paying attention to the ie_lenth. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: add error message to explain lack of HTBen Greear
It can take a user a while to understand why their NIC that advertises 802.11n support cannot actually do 802.11n. Print out a warning in the logs to save the next poor person to use this NIC some trouble. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: report antenna configurationBen Greear
This lets 'iw phy phy0 info' report antennas for the radio device: ... Available Antennas: TX 0x2 RX 0x2 Configured Antennas: TX 0x2 RX 0x2 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: handle failure in Tx vring configVladimir Kondratiev
When configuring Tx vring for new connection, WMI call to the firmware may fail. In this case, need to clean up properly. In particular, need to call cfg80211_del_sta() in case of AP like interface. Perform full "disconnect" procedure for proper clean up Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: fix device ready detectionVladimir Kondratiev
Adjust driver behavior during FW boot. Proper sequence of events after reset and FW download, is as following: - FW prepares mailbox structure and reports IRQ "FW_READY" - driver caches mailbox registers, marks mailbox readiness - FW sends WMI_FW_READY event, ignore it - FW sends WMI_READY event with some data - driver stores relevant data marks FW is operational Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: Fix TSO overflow handlingHamad Kadmany
When Tx ring full is encountered with TSO, printout of "DMA error" was wrongly printed. In addition, in case of Tx ring full return proper error code so that NETDEV_TX_BUSY is returned to network stack in order not to drop the packets and retry transmission of the packets when ring is emptied. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: ignore selected WMI eventsVladimir Kondratiev
Some events are ignored for purpose; such events should not be treated as "unhandled events". Replace info message saying "unhandled" with debug one saying "ignore", to reduce dmesg pollution Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add QCA9377 chipset supportBartosz Markowski
Add the hardware name, revision and update the pci_id table. Currently there're two HW ref. designs available I'm aware of, with 1.0.2 and 1.1 chip revisions. I've access and been using the first one so far and this patch cover only it. QCA9377 inherits most of the stuff (e.g. fw interfaces) from QCA61x4 design, so the integration was pretty straightforward. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: reload HT/VHT capabilities on antenna changeRajkumar Manoharan
To reflect configured antenna settings in HT/VHT MCS map, reload the HT/VHT capabilities upon antenna change. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: move static HT/VHT capability setup functionsRajkumar Manoharan
Move HT and VHT capabiltity setup static functions to avoid forward declaration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: fill HT/VHT MCS rateset only for configured chainmaskRajkumar Manoharan
HT/VHT MCS rateset should be filled only for configured chainmask rather that max supported chainmask. Fix that by checking configured chainmask while filling HT/VHT MCS rate map. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove supported chain maskRajkumar Manoharan
Removing supported chainmask fields as it can be always derived from num_rf_chains. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove shadow copy of CE descriptors for source ringRajkumar Manoharan
For the messages from host to target, shadow copy of CE descriptors are maintained in source ring. Before writing actual CE descriptor, first shadow copy is filled and then it is copied to CE address space. To optimize in download path and to reduce d-cache pressure, removing shadow copy of CE descriptors. This will also reduce driver memory consumption by 33KB during on device probing. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: cleanup copy engine send completionRajkumar Manoharan
The physical address necessary to unmap DMA ('bufferp') is stored in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id when handling send completion (htc ep id is stored in sk_buff control buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp} are removed from CE send completion. This change is needed before removing the shadow copy of copy engine (CE) descriptors in follow up patch. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove send completion validation in diag read/writeRajkumar Manoharan
CE diag window access is serialized (it has to be by design) so there's no way to get a different send completion. so there's no need for post completion validation. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: use local memory instead of shadow descriptor in ce_sendRajkumar Manoharan
Currently to avoid uncached memory access while filling up copy engine descriptors, shadow descriptors are used. This can be optimized further by removing shadow descriptors. To achieve that first shadow ring dependency in ce_send is removed by creating local copy of the descriptor on stack and make a one-shot copy into the "uncached" descriptor. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add fw_stats support to 10.4 firmwareManikanta Pubbisetty
This patch adds support for getting firmware debug stats in 10.4 fw. Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add FW API support to test modeAlan Liu
Add WMI-TLV and FW API support in ath10k testmode. Ath10k can get right wmi command format from UTF image to communicate UTF firmware. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-28ath10k: enable adaptive CCAMaharaja
European Union has made it mandatory that all devices working in 2.4 GHz has to adhere to the ETSI specification (ETSI EN 300 328 V1.9.1) beginnig this year. The standard basically speaks about interferences in 2.4Ghz band. For example, when 802.11 device detects interference, TX must be stopped as long as interference is present. Adaptive CCA is a feature, when enabled the device learns from the environment and configures CCA levels adaptively. This will improve detecting interferences and the device can stop trasmissions till the interference is present eventually leading to good performances in varying interference conditions. The patch includes code for enabling adaptive CCA for 10.2.4 firmware on QCA988X. Signed-off-by: Maharaja <c_mkenna@qti.qualcomm.com> Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-28ssb: add Kconfig entry for compiling SoC related codeRafał Miłecki
This allows saving a little of space when not using ssb on Broadcom SoC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28ssb: move functions specific to SoC hosted bus to separated fileRafał Miłecki
This cleans main.c a bit and will allow us to compile SoC related code conditionally in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28ssb: pick PCMCIA host code support from b43 driverRafał Miłecki
ssb bus can be found on various "host" devices like PCI/PCMCIA/SDIO. Every ssb bus contains cores AKA devices. The main idea is to have ssb driver scan/initialize bus and register ready-to-use cores. This way ssb drivers can operate on a single core mostly ignoring underlaying details. For some reason PCMCIA support was split between ssb and b43. We got PCMCIA host device probing in b43, then bus scanning in ssb and then wireless core probing back in b43. The truth is it's very unlikely we will ever see PCMCIA ssb device with no 802.11 core but I still don't see any advantage of the current architecture. With proposed change we get the same functionality with a simpler architecture, less Kconfig symbols, one killed EXPORT and hopefully cleaner b43. Since b43 supports both: ssb & bcma I prefer to keep ssb specific code in ssb driver. This mostly moves code from b43's pcmcia.c to bridge_pcmcia_80211.c. We already use similar solution with b43_pci_bridge.c. I didn't use "b43" in name of this new file as in theory any driver can operate on wireless core. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28mwifiex: toggle carrier state in start_ap/stop_ap.Marty Faltesek
In uap mode the carrier is not enabled until after the first STA joins. The carrier triggers the bridge to start its state machine, and if STP is enabled, it takes 4 seconds as it transitions from disabled to forwarding. During this time the bridge drops all traffic, and the EAPOL handshake times out after 3 seconds, preventing stations from joining. Follow the logic used in mac80211 and start the carrier in start_ap and disable it in stop_ap. This has a nice benefit of allowing the first station connection time to be reduced by up to 75% when STP is in use. Signed-off-by: Martin Faltesek <mfaltesek@google.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-28wcn36xx: Remove warning message when dev is NULL for arm64 dma_alloc.yfw
arm64 has requirement that all the dma operations have actual device. Otherwise, following warnning message shown and dma allocation fails: WARNING: CPU: 0 PID: 954 at arch/arm64/mm/dma-mapping.c:106 __dma_alloc+0x24c/0x258() Use an actual device structure for DMA allocation Modules linked in: wcn36xx wcn36xx_platform CPU: 0 PID: 954 Comm: ifconfig Not tainted 4.0.0+ #14 Hardware name: Qualcomm Technologies, Inc. MSM 8916 MTP (DT) Call trace: [<ffffffc000089904>] dump_backtrace+0x0/0x124 [<ffffffc000089a38>] show_stack+0x10/0x1c [<ffffffc000627114>] dump_stack+0x80/0xc4 [<ffffffc0000b2e64>] warn_slowpath_common+0x98/0xd0 [<ffffffc0000b2ee8>] warn_slowpath_fmt+0x4c/0x58 [<ffffffc00009487c>] __dma_alloc+0x248/0x258 [<ffffffbffc009270>] wcn36xx_dxe_allocate_mem_pools+0xc4/0x108 [wcn36xx] [<ffffffbffc0079c4>] wcn36xx_start+0x38/0x240 [wcn36xx] [<ffffffc0005f161c>] ieee80211_do_open+0x1b0/0x9a4 [<ffffffc0005f1e68>] ieee80211_open+0x58/0x68 [<ffffffc00051693c>] __dev_open+0xb0/0x120 [<ffffffc000516c10>] __dev_change_flags+0x88/0x150 [<ffffffc000516cf4>] dev_change_flags+0x1c/0x5c [<ffffffc000570950>] devinet_ioctl+0x644/0x6f0 Signed-off-by: Yin, Fengwei <fengwei.yin@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 09:55:44 +0000