summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-09mlxsw: spectrum: pass local_port to mlxsw_sp_port_fdb_uc_opJiri Pirko
Do not pass struct mlxsw_sp_port to mlxsw_sp_port_fdb_uc_op and rather just pass local_port. This is needed in case this is called from SFN process function and mlxsw_sp_port is not existent for particular local_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09vxlan: fix test which detect duplicate vxlan ifaceNicolas Dichtel
When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a9159dde, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a9159dde ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by: Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09net: plip: use new parport device modelSudip Mukherjee
Modify plip driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09cdc-acm: fix NULL pointer referenceOliver Neukum
The union descriptor must be checked. Its usage was conditional before the parser was introduced. This is important, because many RNDIS device, which also use the common parser, have bogus extra descriptors. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Vasily Galkin <galkin-vv@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for machines with pages > 4k (PPC mostly). There's a bug in our optimal transfer size code where we don't account for pages > 4k and can set the transfer size to be less than the page size causing nasty failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Reject optimal transfer length smaller than page size
2016-01-09Merge tag 'pci-v4.4-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixlet from Bjorn Helgaas: "This marks the TI DRA7xx host bridge driver as broken. Apparently it has never worked without some additional out-of-tree code, so I'm going to mark it broken now and remove it completely next cycle unless it's fixed" * tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dra7xx: Mark driver as broken
2016-01-09Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Allow using trace events fields as sort order keys, making 'perf evlist --trace_fields' show those, and then the user can select a subset and use like: perf top -e sched:sched_switch -s prev_comm,next_comm That works as well in 'perf report' when handling files containing tracepoints. The default when just tracepoint events are found in a perf.data file is to format it like ftrace, using the libtraceevent formatters, plugins, etc (Namhyung Kim) - Add support in 'perf script' to process 'perf stat record' generated files, culminating in a python perf script that calculates CPI (Cycles per Instruction) (Jiri Olsa) - Show random perf tool tips in the 'perf report' bottom line (Namhyung Kim) - perf report now defaults to --group if the perf.data file has grouped events, try it with: # perf record -e '{cycles,instructions}' -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ] # perf report # Samples: 1K of event 'anon group { cycles, instructions }' # Event count (approx.): 1955219195 # # Overhead Command Shared Object Symbol 2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle 1.05% 0.33% firefox libxul.so [.] js::SetObjectElement 1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno 0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab 0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1> 0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay 0.62% 1.27% firefox libxul.so [.] js::GetIterator 0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty 0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining User visible fixes: - Coect data mmaps so that the DWARF unwinder can handle usecases needing them, like softice (Jiri Olsa) - Decay callchains in fractal mode, fixing up cases where 'perf top -g' would show entries with more than 100% (Namhyung Kim) Infrastructure changes: - Sync tools/lib with the lib/ in the kernel sources for find_bit.c and move bitmap.[ch] from tools/perf/util/ to tools/lib/ (Arnaldo Carvalho de Melo) - No need to set attr.sample_freq in some 'perf test' entries that only want to deal with PERF_RECORD_ meta-events, improve a bit error output for CQM test (Arnaldo Carvalho de Melo) - Fix python binding build, adding some missing object files now required due to cpumap using find_bit stuff (Arnaldo Carvalho de Melo) - tools/build improvemnts (Jiri Olsa) - Add more files to cscope/ctags databases (Jiri Olsa) - Do not show 'trace' in 'perf help' if it is not compiled in (Jiri Olsa) - Make perf_evlist__open() open evsels with their cpus and threads, like perf record does, making them consistent (Adrian Hunter) - Fix pmu snapshot initialization bug (Stephane Eranian) - Add missing headers in perf's MANIFEST (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-09hwmon: (nct6683) Add basic support for NCT6683 on Mitac boardsGuenter Roeck
Mitac microcode differs from Intel microcode. One key difference is that pwm values can be written. Detect vendor from customer ID field and no longer use DMI data to identify which microcode is running on the chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-09batman-adv: Add kerneldoc for batadv_neigh_node::refcountSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Remove kerneldoc for missing struct membersSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Fix kerneldoc member names in for main structsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Fix kernel-doc parsing of main structsSven Eckelmann
kernel-doc is not able to skip an #ifdef between the kernel documentation block and the start of the struct. Moving the #ifdef before the kernel doc block avoids this problem Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Change ifconfig examples to iproute2Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Split a condition checkMarkus Elfring
Let us split a check for a condition at the beginning of the batadv_is_ap_isolated() function so that a direct return can be performed in this function if the variable "vlan" contained a null pointer. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Delete an unnecessary check before the function call ↵Markus Elfring
"batadv_softif_vlan_free_ref" The batadv_softif_vlan_free_ref() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Less checks in batadv_tvlv_unicast_send()Markus Elfring
* Let us return directly if a call of the batadv_orig_hash_find() function returned a null pointer. * Omit the initialisation for the variable "skb" at the beginning. * Replace an assignment by a call of the kfree_skb() function and delete the affected variable "ret" then. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Delete unnecessary checks before the function call "kfree_skb"Markus Elfring
The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Add function to convert string to batadv throughputSven Eckelmann
The code to convert the throughput information from a string to the batman-adv internal (100Kibit/s) representation is duplicated in batadv_parse_gw_bandwidth. Move this functionality to its own function batadv_parse_throughput to reduce the code complexity. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: only call post function if something changedSimon Wunderlich
Currently, the post function is also called on errors or if there were no changes, which is redundant for the functions currently using these facilities. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: increase BLA wait periods to 6Simon Wunderlich
If networks take a long time to come up, e.g. due to lossy links, then the bridge loop avoidance wait time to suppress broadcasts may not wait long enough and detect a backbone before the mesh is brought up. Increasing the wait period further to 60 seconds makes this scenario less likely. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: purge bridge loop avoidance when its disabledSimon Wunderlich
When bridge loop avoidance is disabled through sysfs, the internal datastructures are not disabled, but only BLA operations are disabled. To be sure that they are removed, purge the data immediately. That is especially useful if a firmwares network state is changed, and the BLA wait periods should restart on the new network. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: remove leftovers of unused BATADV_PRIMARIES_FIRST_HOP flagMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Fix lockdep annotation of batadv_tlv_container_removeSven Eckelmann
The function handles tlv containers and not tlv handlers. Thus the lockdep_assert_held has to check for the container_list lock. Fixes: 2c72d655b044 ("batman-adv: Annotate deleting functions with external lock via lockdep") Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09nfsd: don't hold i_mutex over userspace upcallsNeilBrown
We need information about exports when crossing mountpoints during lookup or NFSv4 readdir. If we don't already have that information cached, we may have to ask (and wait for) rpc.mountd. In both cases we currently hold the i_mutex on the parent of the directory we're asking rpc.mountd about. We've seen situations where rpc.mountd performs some operation on that directory that tries to take the i_mutex again, resulting in deadlock. With some care, we may be able to avoid that in rpc.mountd. But it seems better just to avoid holding a mutex while waiting on userspace. It appears that lookup_one_len is pretty much the only operation that needs the i_mutex. So we could just drop the i_mutex elsewhere and do something like mutex_lock() lookup_one_len() mutex_unlock() In many cases though the lookup would have been cached and not required the i_mutex, so it's more efficient to create a lookup_one_len() variant that only takes the i_mutex when necessary. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09fs:affs:Replace time_t with time64_tDengChao
The affs code uses "time_t" and "get_seconds()". This will cause problems on 32-bit architectures in 2038 when time_t overflows. This patch replaces them with "time64_t" and "ktime_get_real_seconds()". This patch introduces expensive 64-bit divsion in "secs_to_datestamp()", considering this function is not called so often, the cost should be acceptable. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: DengChao <chao.deng@linaro.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09fs/9p: use fscache mutex rather than spinlockSasha Levin
We may sleep inside a the lock, so use a mutex rather than spinlock. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09proc: add a reschedule point in proc_readfd_common()Eric Dumazet
User can pass an arbitrary large buffer to getdents(). It is typically a 32KB buffer used by libc scandir() implementation. When scanning /proc/{pid}/fd, we can hold cpu way too long, so add a cond_resched() to be kind with other tasks. We've seen latencies of more than 50ms on real workloads. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09logfs: constify logfs_block_ops structuresJulia Lawall
The logfs_block_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09fcntl: allow to set O_DIRECT flag on pipeStanislav Kinsburskiy
With packetized mode for pipes, it's not possible to set O_DIRECT on pipe file via sys_fcntl, because of unsupported sanity checks. Ability to set this flag will be used by CRIU to migrate packetized pipes. v2: Fixed typos and mode variable to check. Signed-off-by: Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGEAbhi Das
During testing, I discovered that __generic_file_splice_read() returns 0 (EOF) when aops->readpage fails with AOP_TRUNCATED_PAGE on the first page of a single/multi-page splice read operation. This EOF return code causes the userspace test to (correctly) report a zero-length read error when it was expecting otherwise. The current strategy of returning a partial non-zero read when ->readpage returns AOP_TRUNCATED_PAGE works only when the failed page is not the first of the lot being processed. This patch attempts to retry lookup and call ->readpage again on pages that had previously failed with AOP_TRUNCATED_PAGE. With this patch, my tests pass and I haven't noticed any unwanted side effects. This version removes the thrice-retry loop and instead indefinitely retries lookups on AOP_TRUNCATED_PAGE errors from ->readpage. This behavior is now similar to do_generic_file_read(). Signed-off-by: Abhi Das <adas@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09fs: xattr: Use kvfree()Richard Weinberger
... instead of open coding it. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-08vmstat: allocate vmstat_wq before it is usedMichal Hocko
kernel test robot has reported the following crash: BUG: unable to handle kernel NULL pointer dereference at 00000100 IP: [<c1074df6>] __queue_work+0x26/0x390 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53 Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe #1 Workqueue: events vmstat_shepherd task: cb684600 ti: cb7ba000 task.ti: cb7ba000 EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0 EIP is at __queue_work+0x26/0x390 EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0 Stack: Call Trace: __queue_delayed_work+0xa1/0x160 queue_delayed_work_on+0x36/0x60 vmstat_shepherd+0xad/0xf0 process_one_work+0x1aa/0x4c0 worker_thread+0x41/0x440 kthread+0xb0/0xd0 ret_from_kernel_thread+0x21/0x40 The reason is that start_shepherd_timer schedules the shepherd work item which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates that workqueue so if the further initialization takes more than HZ we might end up scheduling on a NULL vmstat_wq. This is really unlikely but not impossible. Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-09[s390] page_to_phys() always returns a multiple of PAGE_SIZEAl Viro
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-08drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.cPaul Gortmaker
In commit c39dfebc7798956fd2140ae6321786ff35da30c3 ("drivers/tty/serial: make serial/atmel_serial.c explicitly non-modular") we removed the code relating to modular support since it currently only supports built in. However, when redoing my build coverage for mips allmodconfig, which sets CONFIG_OF, I noticed a remaining line that needs to be removed, else we will get a build failure for an undefined module macro. Unfortunately this didn't appear for any of the other arch I tested more frequently, such as ARM. Since MODULE_DEVICE_TABLE is a no-op for non-modular code, we can just remove the offending line. Fixes: c39dfebc7798 ("drivers/tty/serial: make serial/atmel_serial.c explicitly non-modular") Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-08Revert "arm64: dts: Add dts files to enable ION on Hi6220 SoC."Greg Kroah-Hartman
This reverts commit 59dfafd03fc67d38307d2ba30bbfdd1224b8a75d Mark Brown reports that the dts file should not be accepted at this time as it is not following the convention that has been agreed on for the ion drivers. Reported-by: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Yu Dongbin <yudongbin@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-08Merge branch 'r8152-adjustments'David S. Miller
Hayes Wang says: ==================== r8152: code adjustment Adjust test_bit(), clear_bit(), disable_aldps(), and enable_aldps(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08r8152: adjust ALDPS functionhayeswang
Replace disable_aldps() and enable_aldps() with aldps_en(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08r8152: use test_and_clear_bithayeswang
Replace test_bit() followed by clear_bit() with test_and_clear_bit(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08r8152: fix the wake eventhayeswang
When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08phy: micrel: Fix finding PHY properties in MAC node for KSZ9031.Roosen Henri
Commit 651df2183543 ("phy: micrel: Fix finding PHY properties in MAC node.") only fixes finding PHY properties in MAC node for KSZ9021. This commit applies the same fix for KSZ9031. Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included change: - Fix invalid read while copying bat_iv.bcast_own by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08bpf: cleanup bpf_prog_run_{save,clear}_cb helpersDaniel Borkmann
Move the details behind the cb[] access into a small helper to decouple and make them generic for bpf_prog_run_save_cb()/bpf_prog_run_clear_cb() that was introduced via commit ff936a04e5f2 ("bpf: fix cb access in socket filter programs"). Also add a comment to better clarify what is done in bpf_skb_cb(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08Merge branch 'net-sparse-warnings'David S. Miller
Lance Richardson says: ==================== ipv4: fix various issues reported by sparse This trivial patch series addresses a number of endianness- and lock-related issues reported by sparse. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08ipv4: eliminate lock count warnings in ping.cLance Richardson
Add lock release/acquire annotations to ping_seq_start() and ping_seq_stop() to satisfy sparse. Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08ipv4: eliminate endianness warnings in ip_fib.hLance Richardson
fib_multipath_hash() computes a hash using __be32 values, force cast these to u32 to pacify sparse. Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08ipv4: fix endianness warnings in ip_tunnel_core.cLance Richardson
Eliminate endianness mismatch warnings (reported by sparse) in this file by using appropriate nla_put_*()/nla_get_*() calls. Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08nbd: use ->compat_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-08Merge branch 'for-linus' into work.miscAl Viro
2016-01-08compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)Jann Horn
This replaces all code in fs/compat_ioctl.c that translated ioctl arguments into a in-kernel structure, then performed do_ioctl under set_fs(KERNEL_DS), with code that allocates data on the user stack and can call the VFS ioctl handler under USER_DS. This is done as a hardening measure because the caller does not know what kind of ioctl handler will be invoked, only that no corresponding compat_ioctl handler exists and what the ioctl command number is. The accidental invocation of an unlocked_ioctl handler that unexpectedly calls copy_to_user could be a severe security issue. Signed-off-by: Jann Horn <jann@thejh.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 09:37:36 +0000