summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-19netfilter: nf_tables: Tolerate chains with no remaining hooksPhil Sutter
Do not drop a netdev-family chain if the last interface it is registered for vanishes. Users dumping and storing the ruleset upon shutdown to restore it upon next boot may otherwise lose the chain and all contained rules. They will still lose the list of devices, a later patch will fix that. For now, this aligns the event handler's behaviour with that for flowtables. The controversal situation at netns exit should be no problem here: event handler will unregister the hooks, core nftables cleanup code will drop the chain itself. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19netfilter: nf_tables: Compare netdev hooks based on stored namePhil Sutter
The 1:1 relationship between nft_hook and nf_hook_ops is about to break, so choose the stored ifname to uniquely identify hooks. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19netfilter: nf_tables: Use stored ifname in netdev hook dumpsPhil Sutter
The stored ifname and ops.dev->name may deviate after creation due to interface name changes. Prefer the more deterministic stored name in dumps which also helps avoiding inadvertent changes to stored ruleset dumps. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19netfilter: nf_tables: Store user-defined hook ifnamePhil Sutter
Prepare for hooks with NULL ops.dev pointer (due to non-existent device) and store the interface name and length as specified by the user upon creation. No functional change intended. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19netfilter: nf_tables: Flowtable hook's pf value never variesPhil Sutter
When checking for duplicate hooks in nft_register_flowtable_net_hooks(), comparing ops.pf value is pointless as it is always NFPROTO_NETDEV with flowtable hooks. Dropping the check leaves the search identical to the one in nft_hook_list_find() so call that function instead of open coding. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19netfilter: br_netfilter: remove unused conditional and dead codeAntoine Tenart
The SKB_DROP_REASON_IP_INADDRERRORS drop reason is never returned from any function, as such it cannot be returned from the ip_route_input call tree. The 'reason != SKB_DROP_REASON_IP_INADDRERRORS' conditional is thus always true. Looking back at history, commit 50038bf38e65 ("net: ip: make ip_route_input() return drop reasons") changed the ip_route_input returned value check in br_nf_pre_routing_finish from -EHOSTUNREACH to SKB_DROP_REASON_IP_INADDRERRORS. It turns out -EHOSTUNREACH could not be returned either from the ip_route_input call tree and this since commit 251da4130115 ("ipv4: Cache ip_error() routes even when not forwarding."). Not a fix as this won't change the behavior. While at it use kfree_skb_reason. Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19netfilter: nf_tables: fix set size with rbtree backendPablo Neira Ayuso
The existing rbtree implementation uses singleton elements to represent ranges, however, userspace provides a set size according to the number of ranges in the set. Adjust provided userspace set size to the number of singleton elements in the kernel by multiplying the range by two. Check if the no-match all-zero element is already in the set, in such case release one slot in the set size. Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-19io_uring/fdinfo: fix io_uring_show_fdinfo() misuse of ->d_inameAl Viro
Output of io_uring_show_fdinfo() has several problems: * racy use of ->d_iname * junk if the name is long - in that case it's not stored in ->d_iname at all * lack of quoting (names can contain newlines, etc. - or be equal to "<none>", for that matter). * lines for empty slots are pointless noise - we already have the total amount, so having just the non-empty ones would carry the same information. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-18Merge tag 'batadv-next-pullrequest-20250117' of ↵Jakub Kicinski
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Reorder includes for distributed-arp-table.c, by Sven Eckelmann - Fix translation table change handling, by Remi Pommarel (2 patches) - Map VID 0 to untagged TT VLAN, by Sven Eckelmann - Update MAINTAINERS/mailmap e-mail addresses, by the respective authors (4 patches) - netlink: reduce duplicate code by returning interfaces, by Linus Lüssing * tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge: batman-adv: netlink: reduce duplicate code by returning interfaces MAINTAINERS: mailmap: add entries for Antonio Quartulli mailmap: add entries for Sven Eckelmann mailmap: add entries for Simon Wunderlich MAINTAINERS: update email address of Marek Linder batman-adv: Map VID 0 to untagged TT VLAN batman-adv: Don't keep redundant TT change events batman-adv: Remove atomic usage for tt.local_changes batman-adv: Reorder includes for distributed-arp-table.c batman-adv: Start new development cycle ==================== Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge tag 'for-net-next-2025-01-15' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: Add new VID/PID 13d3/3610 for MT7922 - btusb: Add new VID/PID 13d3/3628 for MT7925 - btusb: Add MT7921e device 13d3:3576 - btusb: Add RTL8851BE device 13d3:3600 - btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x - btusb: add sysfs attribute to control USB alt setting - qca: Expand firmware-name property - qca: Fix poor RF performance for WCN6855 - L2CAP: handle NULL sock pointer in l2cap_sock_alloc - Allow reset via sysfs - ISO: Allow BIG re-sync - dt-bindings: Utilize PMU abstraction for WCN6750 - MGMT: Mark LL Privacy as stable * tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits) Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync Bluetooth: qca: Fix poor RF performance for WCN6855 Bluetooth: Allow reset via sysfs Bluetooth: Get rid of cmd_timeout and use the reset callback Bluetooth: Remove the cmd timeout count in btusb Bluetooth: Use str_enable_disable-like helpers Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc Bluetooth: btusb: Add RTL8851BE device 13d3:3600 dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750 Bluetooth: btusb: Add MT7921e device 13d3:3576 Bluetooth: btrtl: check for NULL in btrtl_setup_realtek() Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() Bluetooth: qca: Expand firmware-name to load specific rampatch Bluetooth: qca: Update firmware-name to support board specific nvm dt-bindings: net: bluetooth: qca: Expand firmware-name property Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925 Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922 Bluetooth: btusb: add sysfs attribute to control USB alt setting Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x ... ==================== Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge tag 'wireless-next-2025-01-17' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Most likely the last "new features" pull request for v6.14 and this is a bigger one. Multi-Link Operation (MLO) work continues both in stack in drivers. Few new devices supported and usual fixes all over. Major changes: cfg80211 * Emergency Preparedness Communication Services (EPCS) station mode support mac80211 * an option to filter a sta from being flushed * some support for RX Operating Mode Indication (OMI) power saving * support for adding and removing station links for MLO iwlwifi * new device ids * rework firmware error handling and restart rtw88 * RTL8812A: RFE type 2 support * LED support rtw89 * variant info to support RTL8922AE-VS mt76 * mt7996: single wiphy multiband support (preparation for MLO) * mt7996: support for more variants * mt792x: P2P_DEVICE support * mt7921u: TP-Link TXE50UH support ath12k * enable MLO for QCN9274 (although it seems to be broken with dual band devices) * MLO radar detection support * debugfs: transmit buffer OFDMA, AST entry and puncture stats * tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits) wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig wifi: wilc1000: unregister wiphy only after netdev registration wifi: cfg80211: adjust allocation of colocated AP data wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf() wifi: ath12k: fix key cache handling wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function wifi: ath12k: Remove ath12k_get_num_hw() helper function wifi: ath12k: Refactor the ath12k_hw get helper function argument wifi: ath12k: Refactor ath12k_hw set helper function argument wifi: mt76: mt7996: add implicit beamforming support for mt7992 wifi: mt76: mt7996: fix beacon command during disabling wifi: mt76: mt7996: fix ldpc setting wifi: mt76: mt7996: fix definition of tx descriptor wifi: mt76: connac: adjust phy capabilities based on band constraints wifi: mt76: mt7996: fix incorrect indexing of MIB FW event wifi: mt76: mt7996: fix HE Phy capability wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU wifi: mt76: mt7996: add max mpdu len capability wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain ... ==================== Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: introduce netdev_napi_exit()Eric Dumazet
After 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()") it makes sense to iterate through dev->napi_list while holding the device lock. Also call synchronize_net() at most one time. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250117232113.1612899-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: phy: remove leftovers from switch to linkmode bitmapsHeiner Kallweit
We have some leftovers from the switch to linkmode bitmaps which - have never been used - are not used any longer - have no user outside phy_device.c So remove them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/5493b96e-88bb-4230-a911-322659ec5167@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: sched: Disallow replacing of child qdisc from one parent to anotherJamal Hadi Salim
Lion Ackermann was able to create a UAF which can be abused for privilege escalation with the following script Step 1. create root qdisc tc qdisc add dev lo root handle 1:0 drr step2. a class for packet aggregation do demonstrate uaf tc class add dev lo classid 1:1 drr step3. a class for nesting tc class add dev lo classid 1:2 drr step4. a class to graft qdisc to tc class add dev lo classid 1:3 drr step5. tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024 step6. tc qdisc add dev lo parent 1:2 handle 3:0 drr step7. tc class add dev lo classid 3:1 drr step 8. tc qdisc add dev lo parent 3:1 handle 4:0 pfifo step 9. Display the class/qdisc layout tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 limit 1000p qdisc drr 3: dev lo parent 1:2 step10. trigger the bug <=== prevented by this patch tc qdisc replace dev lo parent 1:3 handle 4:0 step 11. Redisplay again the qdiscs/classes tc class ls dev lo class drr 1:1 root leaf 2: quantum 64Kb class drr 1:2 root leaf 3: quantum 64Kb class drr 1:3 root leaf 4: quantum 64Kb class drr 3:1 root leaf 4: quantum 64Kb tc qdisc ls qdisc drr 1: dev lo root refcnt 2 qdisc plug 2: dev lo parent 1:1 qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p qdisc drr 3: dev lo parent 1:2 Observe that a) parent for 4:0 does not change despite the replace request. There can only be one parent. b) refcount has gone up by two for 4:0 and c) both class 1:3 and 3:1 are pointing to it. Step 12. send one packet to plug echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001)) step13. send one packet to the grafted fifo echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003)) step14. lets trigger the uaf tc class delete dev lo classid 1:3 tc class delete dev lo classid 1:1 The semantics of "replace" is for a del/add _on the same node_ and not a delete from one node(3:1) and add to another node (1:3) as in step10. While we could "fix" with a more complex approach there could be consequences to expectations so the patch takes the preventive approach of "disallow such config". Joint work with Lion Ackermann <nnamrec@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: avoid race between device unregistration and ethnl opsAntoine Tenart
The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found. Fixes: dde91ccfa25f ("ethtool: do not perform operations on net devices being unregistered") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: destroy dev->lock later in free_netdev()Eric Dumazet
syzbot complained that free_netdev() was calling netif_napi_del() after dev->lock mutex has been destroyed. This fires a warning for CONFIG_DEBUG_MUTEXES=y builds. Move mutex_destroy(&dev->lock) near the end of free_netdev(). [1] DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 5971 at kernel/locking/mutex.c:564 __mutex_lock_common kernel/locking/mutex.c:564 [inline] WARNING: CPU: 0 PID: 5971 at kernel/locking/mutex.c:564 __mutex_lock+0xdac/0xee0 kernel/locking/mutex.c:735 Modules linked in: CPU: 0 UID: 0 PID: 5971 Comm: syz-executor Not tainted 6.13.0-rc7-syzkaller-01131-g8d20dcda404d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:564 [inline] RIP: 0010:__mutex_lock+0xdac/0xee0 kernel/locking/mutex.c:735 Code: 0f b6 04 38 84 c0 0f 85 1a 01 00 00 83 3d 6f 40 4c 04 00 75 19 90 48 c7 c7 60 84 0a 8c 48 c7 c6 00 85 0a 8c e8 f5 dc 91 f5 90 <0f> 0b 90 90 90 e9 c7 f3 ff ff 90 0f 0b 90 e9 29 f8 ff ff 90 0f 0b RSP: 0018:ffffc90003317580 EFLAGS: 00010246 RAX: ee0f97edaf7b7d00 RBX: ffff8880299f8cb0 RCX: ffff8880323c9e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003317710 R08: ffffffff81602ac2 R09: 1ffff110170c519a R10: dffffc0000000000 R11: ffffed10170c519b R12: 0000000000000000 R13: 0000000000000000 R14: 1ffff92000662ec4 R15: dffffc0000000000 FS: 000055557a046500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd581d46ff8 CR3: 000000006f870000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> netdev_lock include/linux/netdevice.h:2691 [inline] __netif_napi_del include/linux/netdevice.h:2829 [inline] netif_napi_del include/linux/netdevice.h:2848 [inline] free_netdev+0x2d9/0x610 net/core/dev.c:11621 netdev_run_todo+0xf21/0x10d0 net/core/dev.c:11189 nsim_destroy+0x3c3/0x620 drivers/net/netdevsim/netdev.c:1028 __nsim_dev_port_del+0x14b/0x1b0 drivers/net/netdevsim/dev.c:1428 nsim_dev_port_del_all drivers/net/netdevsim/dev.c:1440 [inline] nsim_dev_reload_destroy+0x28a/0x490 drivers/net/netdevsim/dev.c:1661 nsim_drv_remove+0x58/0x160 drivers/net/netdevsim/dev.c:1676 device_remove drivers/base/dd.c:567 [inline] Fixes: 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()") Reported-by: syzbot+85ff1051228a04613a32@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/678add43.050a0220.303755.0016.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250117224626.1427577-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18eth: bnxt: fix string truncation warning in FW versionJakub Kicinski
W=1 builds with gcc 14.2.1 report: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=] 4193 | "/pkg %s", buf); It's upset that we let buf be full length but then we use 5 characters for "/pkg ". The builds is also clear with clang version 19.1.5 now. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18mptcp: sysctl: add syn_retrans_before_tcp_fallbackMatthieu Baerts (NGI0)
The number of SYN + MPC retransmissions before falling back to TCP was fixed to 2. This is certainly a good default value, but having a fixed number can be a problem in some environments. The current behaviour means that if all packets are dropped, there will be: - The initial SYN + MPC - 2 retransmissions with MPC - The next ones will be without MPTCP. So typically ~3 seconds before falling back to TCP. In some networks where some temporally blackholes are unfortunately frequent, or when a client tries to initiate connections while the network is not ready yet, this can cause new connections not to have MPTCP connections. In such environments, it is now possible to increase the number of SYN retransmissions with MPTCP options to make sure MPTCP is used. Interesting values are: - 0: the first retransmission will be done without MPTCP options: quite aggressive, but also a higher risk of detecting false-positive MPTCP blackholes. - >= 128: all SYN retransmissions will keep the MPTCP options: back to the < 6.12 behaviour. The default behaviour is not changed here. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge branch 'fix-race-conditions-in-ndo_get_stats64'Jakub Kicinski
Shinas Rasheed says: ==================== Fix race conditions in ndo_get_stats64 Fix race conditions in ndo_get_stats64 by storing tx/rx stats locally and not availing per queue resources which could be torn down during interface stop. Also remove stats fetch from firmware which is currently unnecessary ==================== Link: https://patch.msgid.link/20250117094653.2588578-1-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep_vf: update tx/rx stats locally for persistenceShinas Rasheed
Update tx/rx stats locally, so that ndo_get_stats64() can use that and not rely on per queue resources to obtain statistics. The latter used to cause race conditions when the device stopped. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep_vf: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The corresponding warn log for the PF is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: c3fad23cdc06 ("octeon_ep_vf: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-4-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep: update tx/rx stats locally for persistenceShinas Rasheed
Update tx/rx stats locally, so that ndo_get_stats64() can use that and not rely on per queue resources to obtain statistics. The latter used to cause race conditions when the device stopped. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The warn log is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: 6a610a46bad1 ("octeon_ep: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-2-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge branch 'net-xilinx-axienet-enable-adaptive-irq-coalescing-with-dim'Jakub Kicinski
Sean Anderson says: ==================== net: xilinx: axienet: Report an error for bad coalesce settings ==================== Link: https://patch.msgid.link/20250116232954.2696930-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: xilinx: axienet: Report an error for bad coalesce settingsSean Anderson
Instead of silently ignoring invalid/unsupported settings, report an error. Additionally, relax the check for non-zero usecs to apply only when it will be used (i.e. when frames != 1). Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20250116232954.2696930-3-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: xilinx: axienet: Add some symbolic constants for IRQ delay timerSean Anderson
Instead of using literals, add some symbolic constants for the IRQ delay timer calculation. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20250116232954.2696930-2-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18nfc: mrvl: Don't use "proxy" headersAndy Shevchenko
Update header inclusions to follow IWYU (Include What You Use) principle. In this case replace of_gpio.h, which is subject to remove by the GPIOLIB subsystem, with the respective headers that are being used by the driver. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250116153119.148097-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18nfc: st21nfca: Remove unused of_gpio.hAndy Shevchenko
of_gpio.h is deprecated and subject to remove. The drivers in question don't use it, simply remove the unused header. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge tag 'trace-v6.13-rc7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Fix regression in GFP output in trace events It was reported that the GFP flags in trace events went from human readable to just their hex values: gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca This was caused by a change that added the use of enums in calculating the GFP flags. As defines get translated into their values in the trace event format files, the user space tooling could easily convert the GFP flags into their symbols via the __print_flags() helper macro. The problem is that enums do not get converted, and the names of the enums show up in the format files and user space tooling cannot translate them. Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is the tracing infrastructure macro that informs the tracing subsystem what the values for enums and it can then expose that to user space" * tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: gfp: Fix the GFP enum values shown for user space tracing tools
2025-01-17Merge branch 'ethtool-get_ts_stats-for-dsa-and-ocelot-driver'Jakub Kicinski
Vladimir Oltean says: ==================== ethtool get_ts_stats() for DSA and ocelot driver After a recent patch set with fixes and general restructuring, Jakub asked for the Felix DSA driver to start reporting standardized statistics for hardware timestamping: https://lore.kernel.org/netdev/20241207180640.12da60ed@kernel.org/ Testing follows the same procedure as in the aforementioned series, with PTP packet loss induced through taprio: $ ethtool -I --show-time-stamping swp3 Time stamping parameters for swp3: Capabilities: hardware-transmit software-transmit hardware-receive software-receive software-system-clock hardware-raw-clock PTP Hardware Clock: 1 Hardware Transmit Timestamp Modes: off on onestep-sync Hardware Receive Filter Modes: none ptpv2-l4-event ptpv2-l2-event ptpv2-event Statistics: tx_pkts: 14591 tx_lost: 85 tx_err: 0 v1: https://lore.kernel.org/20241213140852.1254063-1-vladimir.oltean@nxp.com/ ==================== Link: https://patch.msgid.link/20250116104628.123555-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: dsa: felix: report timestamping stats from the ocelot libraryVladimir Oltean
Make the linkage between the DSA user port ethtool_ops :: get_ts_info and the implementation from the Ocelot switch library. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-5-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: mscc: ocelot: add TX timestamping statisticsVladimir Oltean
Add an u64 hardware timestamping statistics structure for each ocelot port. Export a function from the common switch library for reporting them to ethtool. This is called by the ocelot switchdev front-end for now. Note that for the switchdev driver, we report the one-step PTP packets as unconfirmed, even though in principle, for some transmission mechanisms like FDMA, we may be able to confirm transmission and bump the "pkts" counter in ocelot_fdma_tx_cleanup() instead. I don't have access to hardware which uses the switchdev front-end, and I've kept the implementation simple. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: dsa: implement get_ts_stats ethtool operation for user portsVladimir Oltean
Integrate with the standard infrastructure for reporting hardware packet timestamping statistics. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: ethtool: ts: add separate counter for unconfirmed one-step TX timestampsVladimir Oltean
For packets with two-step timestamp requests, the hardware timestamp comes back to the driver through a confirmation mechanism of sorts, which allows the driver to confidently bump the successful "pkts" counter. For one-step PTP, the NIC is supposed to autonomously insert its hardware TX timestamp in the packet headers while simultaneously transmitting it. There may be a confirmation that this was done successfully, or there may not. None of the current drivers which implement ethtool_ops :: get_ts_stats() also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it is a bit unclear which model to follow. But there are NICs, such as DSA, where there is no transmit confirmation at all. Here, it would be wrong / misleading to increment the successful "pkts" counter, because one-step PTP packets can be dropped on TX just like any other packets. So introduce a special counter which signifies "yes, an attempt was made, but we don't know whether it also exited the port or not". I expect that for one-step PTP packets where a confirmation is available, the "pkts" counter would be bumped. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge branch 'mlxsw-move-tx-header-handling-to-pci-driver'Jakub Kicinski
Petr Machata says: ==================== mlxsw: Move Tx header handling to PCI driver Amit Cohen writes: Tx header should be added to all packets transmitted from the CPU to Spectrum ASICs. Historically, handling this header was added as a driver function, as Tx header is different between Spectrum and Switch-X. From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant code was removed. For now, there is no justification to handle Tx header as part of spectrum.c, we can handle this as part of PCI, in skb_transmit(). This change will also be useful when XDP support will be added to mlxsw, as for XDP_TX and XDP_REDIRECT actions, Tx header should be added before transmitting the packet. Patch set overview: Patches #1-#2 add structure to store Tx header info and initialize it Patch #3 moves definitions of Tx header fields to txheader.h Patch #4 moves Tx header handling to PCI driver Patch #5 removes unnecessary attribute ==================== Link: https://patch.msgid.link/cover.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Do not store Tx header length as driver parameterAmit Cohen
Tx header handling was moved to PCI code, as there is no several drivers which configure Tx header differently. Tx header length is stored as driver parameter, this is not really necessary as it always stores the same value. Remove this field and use the macro MLXSW_TXHDR_LEN explicitly. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/1fb7b3f007de4d311e559c8a954b673d0895d5e9.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Move Tx header handling to PCI driverAmit Cohen
Tx header should be added to all packets transmitted from the CPU to Spectrum ASICs. Historically, handling this header was added as a driver function, as Tx header is different between Spectrum and Switch-X. See SwitchX implementation in commit 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support"). From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant code was removed. For now, there is no justification to handle Tx header as part of spectrum.c, we can handle this as part of PCI, in skb_transmit(). A future patch set will add support for XDP in mlxsw driver, to support XDP_TX and XDP_REDIRECT actions, Tx header should be added before transmitting the packet. As preparation for this, move Tx header handling to PCI driver, so then XDP code will not have to call API from spectrum.c. This also improves the code as now Tx header is pushed just before transmitting, so it is not done from many flows which might miss something. Note that for PTP, we should configure Tx header differently, use the fields from mlxsw_txhdr_info to configure the packets correctly in PCI driver. Handle VLAN tagging in switch driver, verify that packet which should be transmitted as data is tagged, otherwise, tag it. Remove the calls for thxdr_construct() functions, as now this is done as part of skb_transmit(). Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/293a81e6f7d59a8ec9f9592edb7745536649ff11.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Define Tx header fields in txheader.hAmit Cohen
The next patch will move Tx header constructing to pci.c. As preparation, move the definitions of Tx header fields from spectrum.c to txheader.h, so pci.c will include this header and can access the fields. Remove 'etclass' which is not used. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/2250b5cb3998ab4850fc8251c3a0f5926d32e194.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Initialize txhdr_info according to PTP operationsAmit Cohen
A next patch will construct Tx header as part of pci.c. The switch driver (mlxsw_spectrum.ko) should encapsulate all the differences between the different ASICs and the bus driver (mlxsw_pci.ko) should remain unaware. As preparation, add the relevant info as part of mlxsw_txhdr_info structure, so later bus driver will merely construct the Tx header based on information passed from the switch driver. Most of the packets are transmitted as control packets, but PTP packets in Spectrum-2 and Spectrum-3 should be handled differently. The driver transmits them as data packets, and the default VLAN tag (4095) is added if the packet is not already tagged. Extend PTP operations to store a boolean which indicates whether packets should be transmitted as data packets. Set it for Spectrum-2 and Spectrum-3 only. Extend mlxsw_txhdr_info to store fields which will be used later to construct Tx header. Initialize such fields according to the new boolean which is stored in PTP operations. Note that for now, mlxsw_txhdr_info structure is initialized, but not used, a next patch will use it. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/efcaacd4bedef524e840a0c29f96cebf2c4bc0e0.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Add mlxsw_txhdr_info structureAmit Cohen
mlxsw_tx_info structure is used to store information that is needed to process Tx completions when Tx time stamps are requested. A next patch will move Tx header handling from spectrum.c to pci.c. For that, some additional fields which are related to Tx should be passed to pci driver. As preparation, create an extended structure, called mlxsw_txhdr_info, and store mlxsw_tx_info inside. The new fields should not be added to mlxsw_tx_info structure as it is stored in the SKB control block which is of limited size. The next patch will extend the new structure with some fields which are needed in order to construct Tx header. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/93aed1961f046f79f46869bab37a3faa5027751d.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net/mlx5: fix unintentional sign extension on shift of dest_attr->vport.vhca_idColin Ian King
Shifting dest_attr->vport.vhca_id << 16 results in a promotion from an unsigned 16 bit integer to a 32 bit signed integer, this is then sign extended to a 64 bit unsigned long on 64 bitarchitectures. If vhca_id is greater than 0x7fff then this leads to a sign extended result where all the upper 32 bits of idx are set to 1. Fix this by casting vhca_id to the same type as idx before performing the shift. Fixes: 8e2e08a6d1e0 ("net/mlx5: fs, add support for dest vport HWS action") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Moshe Shemesh <moshe@nvidia.com> Link: https://patch.msgid.link/20250116181700.96437-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: tc: improve qdisc error messagesJohn Ousterhout
The existing error message ("Invalid qdisc name") is confusing because it suggests that there is no qdisc with the given name. In fact, the name does refer to a valid qdisc, but it doesn't match the kind of an existing qdisc being modified or replaced. The new error message provides more detail to eliminate confusion. Signed-off-by: John Ousterhout <ouster@cs.stanford.edu> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250116195642.2794-1-ouster@cs.stanford.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: support FW Recovery Mode Konrad Knitter says: Enable update of card in FW Recovery Mode * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: support FW Recovery Mode devlink: add devl guard pldmfw: enable selected component update ==================== Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17hv_netvsc: Replace one-element array with flexible array memberThorsten Blum
Replace the deprecated one-element array with a modern flexible array member in the struct nvsp_1_message_send_receive_buffer_complete. Use struct_size_t(,,1) instead of sizeof() to maintain the same size. Compile-tested only. Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Tested-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://patch.msgid.link/20250116211932.139564-2-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17gtp: Prepare ip4_route_output_gtp() to .flowi4_tos conversion.Guillaume Nault
Use inet_sk_dscp() to get the socket DSCP value as dscp_t, instead of ip_sock_rt_tos() which returns a __u8. This will ease the conversion of fl4->flowi4_tos to dscp_t, which now just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/06bdb310a075355ff059cd32da2efc29a63981c9.1737034675.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17dccp: Prepare dccp_v4_route_skb() to .flowi4_tos conversion.Guillaume Nault
Use inet_sk_dscp() to get the socket DSCP value as dscp_t, instead of ip_sock_rt_tos() which returns a __u8. This will ease the conversion of fl4->flowi4_tos to dscp_t, which now just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/208dc5ca28bb5595d7a545de026bba18b1d63bda.1737032802.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net/mlxfw: Drop hard coded max FW flash image sizeMaher Sanalla
Currently, mlxfw kernel module limits FW flash image size to be 10MB at most, preventing the ability to burn recent BlueField-3 FW that exceeds the said size limit. Thus, drop the hard coded limit. Instead, rely on FW's max_component_size threshold that is reported in MCQI register as the size limit for FW image. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: let net.core.dev_weight always be non-zeroLiu Jian
The following problem was encountered during stability test: (NULL net_device): NAPI poll function process_backlog+0x0/0x530 \ returned 1, exceeding its budget of 0. ------------[ cut here ]------------ list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \ next=ffff88905f746e40. WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \ __list_add_valid_or_report+0xf3/0x130 CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+ RIP: 0010:__list_add_valid_or_report+0xf3/0x130 Call Trace: ? __warn+0xcd/0x250 ? __list_add_valid_or_report+0xf3/0x130 enqueue_to_backlog+0x923/0x1070 netif_rx_internal+0x92/0x2b0 __netif_rx+0x15/0x170 loopback_xmit+0x2ef/0x450 dev_hard_start_xmit+0x103/0x490 __dev_queue_xmit+0xeac/0x1950 ip_finish_output2+0x6cc/0x1620 ip_output+0x161/0x270 ip_push_pending_frames+0x155/0x1a0 raw_sendmsg+0xe13/0x1550 __sys_sendto+0x3bf/0x4e0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x5b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reproduction command is as follows: sysctl -w net.core.dev_weight=0 ping 127.0.0.1 This is because when the napi's weight is set to 0, process_backlog() may return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this napi to be re-polled in net_rx_action() until __do_softirq() times out. Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can be retriggered in enqueue_to_backlog(), causing this issue. Making the napi's weight always non-zero solves this problem. Triggering this issue requires system-wide admin (setting is not namespaced). Fixes: e38766054509 ("[NET]: Fix sysctl net.core.dev_weight") Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17selftests: net: give up on the cmsg_time accuracy on slow machinesJakub Kicinski
Commit b9d5f5711dd8 ("selftests: net: increase the delay for relative cmsg_time.sh test") widened the accepted value range 8x but we still see flakes (at a rate of around 7%). Return XFAIL for the most timing sensitive test on slow machines. Before: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK' FAIL - 1/36 cases failed After: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL) Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL) OK Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge tag 'devicetree-fixes-for-6.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: "Another fix and testcase to avoid the newly added WARN in the case of non-translatable addresses" * tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/address: Fix WARN when attempting translating non-translatable addresses of/unittest: Add test that of_address_to_resource() fails on non-translatable address
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:50:40 +0000