summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-23drm/amdgpu: only set DP subconnector type on DP and eDP connectorsAlex Deucher
Fixes a crash in drm_object_property_set_value() because the property is not set for internal DP ports that connect to a bridge chips (e.g., DP to VGA or DP to LVDS). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739 Fixes: 65bf2cf95d3ade ("drm/amdgpu: utilize subconnector property for DP through atombios") Tested-By: Kris Karas <bugs-a17@moonlit-rail.com> Cc: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2020-12-23drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfwEvan Quan
This can suppress the annoying but unharmful prompts. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: add getter routine to retrieve mpcc muxJosip Pavic
[Why & How] Add function to identify which MPCC is providing input to a specified OPP Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: always program DPPDTO unless not safe to lowerJake Wang
[Why] We defer clock updates to after pipes have been programmed. In some instances we use DPPCLK that have been previously set to be "unused". This results in a brief window of time where underflow could occur. [How] During prepare bandwidth allow rn_update_clocks_update_dpp_dto to check each instance and compare previous clock to new clock. If new clock is higher than previous clock, program DPPDTO. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: [FW Promotion] Release 0.0.47Yongqiang Sun
- restore lvtma_pwrseq_delay2 from vbios integrated info table - restore MVID/NVID after power up. - Enable timer wake up mask when enable timer interrupt. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: updated wm table for RenoirJake Wang
[Why] For certain timings, Renoir may underflow due to sr exit latency being too slow. [How] Updated wm table for renoir. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Acquire DSC during split stream for ODM only if top_pipeSung Lee
[WHY] DSC should only be acquired per OPP. Therefore, DSC should only be acquired for the top_pipe when ODM is enabled. Not doing this check may lead to acquiring more DSC's than needed when doing MPO + ODM Combine. [HOW] Only acquire DSC if pipe is top_pipe. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Multi-display underflow observedAric Cyr
[Why] FP2 programming not happening when topology changes occur with multiple displays. [How] Ensure FP2 is programmed whenever global sync changes occur but wait for VACTIVE first to avoid underflow. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Remove unnecessary NULL checkEryk Brol
[Why] new_crtc_state is already dereferenced earlier in the function [How] Remove the check Signed-off-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Update RN/VGH active display count workaroundMichael Strauss
[WHY] Virtual signals were previously counted as a workaround to S0i2 hang which is fixed on Renoir. This blocks S0i3 diags testing. [HOW] Stop counting virtual signals as S0i2 hang is fixed on Renoir. Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: change SMU repsonse timeout to 2s.Yongqiang Sun
[Why] there is some garbage showing up during reboot test. Reason: SMU might handle display driver msg defered and driver will send next msg to SMU after 10ms timeout, once SMU FW handle previous msg, parameters are changed to next one, which result in a wrong value be programmed. [How] Extend timeout to 2s so SMU will have enough time to handle driver msg. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: gradually ramp ABM intensityRizvi
[Why] Need driver to pass values of backlight ramp start and ramp reduction so that intensity can be ramped down appropriately. [How] Using abm_parameters structure to get these values from driver. Signed-off-by: Rizvi <syerizvi@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: To modify the condition in indicating branch deviceMartin Tsai
[why] The sink count change HPD_IRQ will be ignored if the branch device has only DP DFP. [how] To remove the port type restriction. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Modify the hdcp device count check conditionMartin Tsai
[why] Some MST display may not report the internal panel to DEVICE_COUNT, that makes the check condition always failed. [how] To update this condition with the reported device count + 1 (because the immediate repeater's internal panel is possibly not included in DEVICE_COUNT) Signed-off-by: Martin Tsai <martin.tsai@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Interfaces for hubp blank and soft resetWesley Chalmers
[WHY] HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank and also toggle HUBP_DISABLE, which should instead be called HUBP_SOFT_RESET for what it does in HW. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: handler not correctly checked at remove_irq_handlerQingqing Zhuo
[why] handler is supposedly passed in as a function pointer; however, the entire struct amdgpu_dm_irq_handler_data gets from the list is used to check match. [how] use the interrupt_handler within amdgpu_dm_irq_handler_data for checking match. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: check gfx pipe availability before toggling its interruptsHawking Zhang
GUI_IDLE interrupts controlled by CP_INT_CNTL_RING0 are only applicable to me0 pipe0. For ASICs that have gfx pipe removed, don't toggle those bits. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: remove unnecessary asic type checkHawking Zhang
The number of crtc should be 0 for ASICs that don't have display engine. Remove the unnecessary asic type check then. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: check number of gfx ring before init cp gfxHawking Zhang
Check number of gfx ring, rather than asic type, before cp gfx engine initialization so driver just need to make sure number of gfx ring is initialized correctly in gfx early_init phase. No need to add additional asic type check everywhere when there is new asic with gfx pipe removed. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23net: ipa: fix interconnect enable bugAlex Elder
When the core clock rate and interconnect bandwidth specifications were moved into configuration data, a copy/paste bug was introduced, causing the memory interconnect bandwidth to be set three times rather than enabling the three different interconnects. Fix this bug. Fixes: 91d02f9551501 ("net: ipa: use config data for clocking") Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201222151613.5730-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23virtio_net: Fix recursive call to cpus_read_lock()Jeff Dike
virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS and CONFIG_HOTPLUG are enabled. The path is: virtnet_set_channels - calls get_online_cpus(), which is a trivial wrapper around cpus_read_lock() netif_set_real_num_tx_queues netif_reset_xps_queues_gt netif_reset_xps_queues - calls cpus_read_lock() This call chain and potential deadlock happens when the number of TX queues is reduced. This commit the removes netif_set_real_num_[tr]x_queues calls from inside the get/put_online_cpus section, as they don't require that it be held. Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive") Signed-off-by: Jeff Dike <jdike@akamai.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23md/bcache: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Coly Li <colyli@sue.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-23bcache:remove a superfluous check in register_bcacheYi Li
There have no reassign the bdev after check It is IS_ERR. the double check !IS_ERR(bdev) is superfluous. After commit 4e7b5671c6a8 ("block: remove i_bdev"), "Switch the block device lookup interfaces to directly work with a dev_t so that struct block_device references are only acquired by the blkdev_get variants (and the blk-cgroup special case). This means that we now don't need an extra reference in the inode and can generally simplify handling of struct block_device to keep the lookups contained in the core block layer code." so after lookup_bdev call, there no need to do bdput. remove a superfluous check the bdev & don't call bdput after lookup_bdev. Fixes: 4e7b5671c6a8("block: remove i_bdev") Signed-off-by: Yi Li <yili@winhong.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-23crypto: qat - add CRYPTO_AES to Kconfig dependenciesMarco Chiappero
This patch includes a missing dependency (CRYPTO_AES) which may lead to an "undefined reference to `aes_expandkey'" linking error. Fixes: 5106dfeaeabe ("crypto: qat - add AES-XTS support for QAT GEN4 devices") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-23crypto: keembay - Add dependency on HAS_IOMEMDaniele Alessandrelli
Add dependency for CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 on HAS_IOMEM to prevent build failures. Fixes: 88574332451380f4 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-23crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAYGeert Uytterhoeven
The Intel Keem Bay Offload and Crypto Subsystem (OCS) is only present on Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about this driver when configuring a kernel without Intel Keem Bay platform support. While at it, fix a misspelling of "cipher". Fixes: 88574332451380f4 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-22Merge tag 'wireless-drivers-2020-12-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22qede: fix offload for IPIP tunnel packetsManish Chopra
IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22docs: netdev-FAQ: fix question headers formattingBaruch Siach
Join adjacent questions to a single question line. This fixes the formatting of questions that were not part of the heading. Also, drop Q: and A: prefixes. We don't need them now that questions and answers are visually separated. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/f76078ba5547744f2ec178984c32fbc7dcd29a2b.1608454187.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22net: ethernet: mvneta: Fix error handling in mvneta_probeDinghao Liu
When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22ibmvnic: fix login buffer memory leakLijun Pan
Commit 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") frees login_rsp_buffer in release_resources() and send_login() because handle_login_rsp() does not free it. Commit f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp(). It seems unnecessary to free it in release_resources() and send_login(). There are chances that handle_login_rsp returns earlier without freeing buffers. Double-checking the buffer is harmless since release_login_buffer and release_login_rsp_buffer will do nothing if buffer is already freed. Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22MAINTAINERS: remove names from mailing list maintainersJakub Kicinski
When searching for inactive maintainers it's useful to filter out mailing list addresses. Such "maintainers" will obviously never feature in a "From:" line of an email or a review tag. Since "L:" entries only provide the address of a mailing list without a fancy name extend this pattern to "M:" entries. Alternatively we could reserve M: entries for humans only and move the fake "maintainers" to L:. While I'd personally prefer to reserve M: for humans only, I'm not 100% that's a great choice either, given most L: entries are in fact open mailing lists with public archives. Link: https://lore.kernel.org/r/20201219185538.750076-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22net: stmmac: dwmac-meson8b: ignore the second clock inputMartin Blumenstingl
The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock inputs: - Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to both inputs) - GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2 All known vendor kernels and u-boots are using the first input only. We let the common clock framework automatically choose the "right" parent. For some boards this causes a problem though, specificially with G12A and newer SoCs. The clock input is used for generating the 125MHz RGMII TX clock. For the two input clocks this means on G12A: - FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz - MPLL2: 499999993Hz / 4 = 124999998.25Hz In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz closer to the requested frequency than FCLK_DIV2. In reality however there is a resource conflict because MPLL2 is needed to generate some of the audio clocks. dwmac-meson8b probes first and sets up the clock tree with MPLL2. This works fine until the audio driver comes and "steals" the MPLL2 clocks and configures it with it's own rate (294909637Hz). The common clock framework happily changes the MPLL2 rate but does not reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz, which is more than 40% off the requested 125MHz. Don't use the second clock input for now to force the common clock framework to always select the first parent. This mimics the behavior from the vendor driver and fixes the clock resource conflict with the audio driver on G12A boards. Once the common clock framework can handle this situation this change can be reverted again. Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: thomas graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20201219135036.3216017-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22dt-bindings: Drop redundant maxItems/itemsRob Herring
'maxItems' equal to the 'items' list length is redundant. 'maxItems' is preferred for a single entry while greater than 1 should have an 'items' list. A meta-schema check for this is pending once these existing cases are fixed. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: dri-devel@lists.freedesktop.org Cc: dmaengine@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20201222040645.1323611-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-22dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'Rob Herring
'memory-region' is a common property, so it doesn't need a type ref here. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: netdev@vger.kernel.org Acked-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201222040121.1314370-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-22dt-bindings: Drop unnecessary *-supply schemas propertiesRob Herring
*-supply properties are always a single phandle, so binding schemas don't need a type $ref nor 'maxItems'. A meta-schema check for this is pending once these existing cases are fixed. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-media@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20201221234659.824881-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-22io_uring: hold uring_lock while completing failed polled io in ↵Xiaoguang Wang
io_wq_submit_work() io_iopoll_complete() does not hold completion_lock to complete polled io, so in io_wq_submit_work(), we can not call io_req_complete() directly, to complete polled io, otherwise there maybe concurrent access to cqring, defer_list, etc, which is not safe. Commit dad1b1242fd5 ("io_uring: always let io_iopoll_complete() complete polled io") has fixed this issue, but Pavel reported that IOPOLL apart from rw can do buf reg/unreg requests( IORING_OP_PROVIDE_BUFFERS or IORING_OP_REMOVE_BUFFERS), so the fix is not good. Given that io_iopoll_complete() is always called under uring_lock, so here for polled io, we can also get uring_lock to fix this issue. Fixes: dad1b1242fd5 ("io_uring: always let io_iopoll_complete() complete polled io") Cc: <stable@vger.kernel.org> # 5.5+ Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> [axboe: don't deref 'req' after completing it'] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-22io_uring: fix double io_uring freePavel Begunkov
Once we created a file for current context during setup, we should not call io_ring_ctx_wait_and_kill() directly as it'll be done by fput(file) Cc: stable@vger.kernel.org # 5.10 Reported-by: syzbot+c9937dfb2303a5f18640@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> [axboe: fix unused 'ret' for !CONFIG_UNIX] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-22Smack: Handle io_uring kernel thread privilegesCasey Schaufler
Smack assumes that kernel threads are privileged for smackfs operations. This was necessary because the credential of the kernel thread was not related to a user operation. With io_uring the credential does reflect a user's rights and can be used. Suggested-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2020-12-22Merge tag 'acpi-5.11-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These make the ACPI enumeration of devices take _DEP information into account more aggressively, fix device IDs matching in the ACPI part of the PNP devices framework and update the ACPI code related to suspend-to-idle to take systems based on AMD hardware into account properly. Specifics: - Modify the ACPI device enumeration code to defer the enumeration of devices with an _HID whose lists of operation region dependencies returned by _DEP are not empty after eliminating the entries representing known-benign dependencies from them (Rafael Wysocki, Hans de Goede). - Make the ACPI PNP code mathing device IDs also take the length of the given ID string into account (Hui Wang). - Add AMD systems support to the ACPI code handling suspend-to-idle via the PNP0D80 (System Power Management Controller) device _DSM interface (Shyam Sundar). - Move the suspend-to-idle handling code related to the PNP0D80 device _DSM interface, which is x86-specific, to a separate file in the x86/ subdirectory (Rafael Wysocki)" * tag 'acpi-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Move x86-specific code to the x86 directory ACPI: scan: Add Intel Baytrail Mailbox Device to acpi_ignore_dep_ids ACPI: scan: Avoid unnecessary second pass in acpi_bus_scan() ACPI: scan: Defer enumeration of devices with _DEP lists ACPI: scan: Evaluate _DEP before adding the device ACPI: PM: s2idle: Add AMD support to handle _DSM ACPI: PNP: compare the string length in the matching_id()
2020-12-22Merge tag 'pm-5.11-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update the CPPC cpufreq driver and intel_pstate (which involves updating the cpufreq core and the schedutil governor) and make janitorial changes in the ACPI code handling processor objects. Specifics: - Rework the passive-mode "fast switch" path in the intel_pstate driver to allow it receive the minimum (required) and target (desired) performance information from the schedutil governor so as to avoid running some workloads too fast (Rafael Wysocki). - Make the intel_pstate driver allow the policy max limit to be increased after the guaranteed performance value for the given CPU has increased (Rafael Wysocki). - Clean up the handling of CPU coordination types in the CPPC cpufreq driver and make it export frequency domains information to user space via sysfs (Ionela Voinescu). - Fix the ACPI code handling processor objects to use a correct coordination type when it fails to map frequency domains and drop a redundant CPU map initialization from it (Ionela Voinescu, Punit Agrawal)" * tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Use most recent guaranteed performance values cpufreq: intel_pstate: Implement the ->adjust_perf() callback cpufreq: Add special-purpose fast-switching callback for drivers cpufreq: schedutil: Add util to struct sg_cpu cppc_cpufreq: replace per-cpu data array with a list cppc_cpufreq: expose information on frequency domains cppc_cpufreq: clarify support for coordination types cppc_cpufreq: use policy->cpu as driver of frequency setting ACPI: processor: fix NONE coordination for domain mapping failure
2020-12-22Merge tag 'kconfig-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - Support only Qt5 for qconf - Validate signal/slot connection at compile time of qconf - Sanitize header includes * tag 'kconfig-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: doc: fix $(fileno) to $(filename) kconfig: fix return value of do_error_if() kconfig: clean up header inclusion kconfig: qconf: show Qt version in the About dialog kconfig: make lkc.h self-sufficient #include-wise kconfig: qconf: convert to Qt5 new signal/slot connection syntax kconfig: qconf: use a variable to pass packages to pkg-config kconfig: qconf: drop Qt4 support
2020-12-22Merge tag 'kbuild-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use /usr/bin/env for shebang lines in scripts - Remove useless -Wnested-externs warning flag - Update documents - Refactor log handling in modpost - Stop building modules without MODULE_LICENSE() tag - Make the insane combination of 'static' and EXPORT_SYMBOL an error - Improve genksyms to handle _Static_assert() * tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/kbuild: Document platform dependency practises Documentation/kbuild: Document COMPILE_TEST dependencies genksyms: Ignore module scoped _Static_assert() modpost: turn static exports into error modpost: turn section mismatches to error from fatal() modpost: change license incompatibility to error() from fatal() modpost: turn missing MODULE_LICENSE() into error modpost: refactor error handling and clarify error/fatal difference modpost: rename merror() to error() kbuild: don't hardcode depmod path kbuild: doc: document subdir-y syntax kbuild: doc: clarify the difference between extra-y and always-y kbuild: doc: split if_changed explanation to a separate section kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections kbuild: doc: fix 'List directories to visit when descending' section kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/ kbuild: doc: update the description about kbuild Makefiles Makefile.extrawarn: remove -Wnested-externs warning tweewide: Fix most Shebang lines
2020-12-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge KASAN updates from Andrew Morton. This adds a new hardware tag-based mode to KASAN. The new mode is similar to the existing software tag-based KASAN, but relies on arm64 Memory Tagging Extension (MTE) to perform memory and pointer tagging (instead of shadow memory and compiler instrumentation). By Andrey Konovalov and Vincenzo Frascino. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits) kasan: update documentation kasan, mm: allow cache merging with no metadata kasan: sanitize objects when metadata doesn't fit kasan: clarify comment in __kasan_kfree_large kasan: simplify assign_tag and set_tag calls kasan: don't round_up too much kasan, mm: rename kasan_poison_kfree kasan, mm: check kasan_enabled in annotations kasan: add and integrate kasan boot parameters kasan: inline (un)poison_range and check_invalid_free kasan: open-code kasan_unpoison_slab kasan: inline random_tag for HW_TAGS kasan: inline kasan_reset_tag for tag-based modes kasan: remove __kasan_unpoison_stack kasan: allow VMAP_STACK for HW_TAGS mode kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK kasan: introduce set_alloc_info kasan: rename get_alloc/free_info kasan: simplify quarantine_put call site kselftest/arm64: check GCR_EL1 after context switch ...
2020-12-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linuxLinus Torvalds
Pull ARM updates from Russell King: - Rework phys/virt translation - Add KASan support - Move DT out of linear map region - Use more PC-relative addressing in assembly - Remove FP emulation handling while in kernel mode - Link with '-z norelro' - remove old check for GCC <= 4.2 in ARM unwinder code - disable big endian if using clang's linker * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits) ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section ARM: 9038/1: Link with '-z norelro' ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro ARM: 9036/1: uncompress: Fix dbgadtb size parameter name ARM: 9035/1: uncompress: Add be32tocpu macro ARM: 9033/1: arm/smp: Drop the macro S(x,s) ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol ARM: 9044/1: vfp: use undef hook for VFP support detection ARM: 9034/1: __div64_32(): straighten up inline asm constraints ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler ARM: 9028/1: disable KASAN in call stack capturing routines ARM: 9026/1: unwind: remove old check for GCC <= 4.2 ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD ARM: 9024/1: Drop useless cast of "u64" to "long long" ARM: 9023/1: Spelling s/mmeory/memory/ ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak ARM: kvm: replace open coded VA->PA calculations with adr_l call ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET ...
2020-12-22Merge tag 'for-5.11/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add DM verity support for signature verification with 2nd keyring - Fix DM verity to skip verity work if IO completes with error while system is shutting down - Add new DM multipath "IO affinity" path selector that maps IO destined to a given path to a specific CPU based on user provided mapping - Rename DM multipath path selector source files to have "dm-ps" prefix - Add REQ_NOWAIT support to some other simple DM targets that don't block in more elaborate ways waiting for IO - Export DM crypt's kcryptd workqueue via sysfs (WQ_SYSFS) - Fix error return code in DM's target_message() if empty message is received - A handful of other small cleanups * tag 'for-5.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: simplify the return expression of load_mapping() dm ebs: avoid double unlikely() notation when using IS_ERR() dm verity: skip verity work if I/O error when system is shutting down dm crypt: export sysfs of kcryptd workqueue dm ioctl: fix error return code in target_message dm crypt: Constify static crypt_iv_operations dm: add support for REQ_NOWAIT to various targets dm: rename multipath path selector source files to have "dm-ps" prefix dm mpath: add IO affinity path selector dm verity: Add support for signature verification with 2nd keyring dm: remove unnecessary current->bio_list check when submitting split bio
2020-12-22Merge tag 'hwmon-for-v5.11-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull another hwmon update from Guenter Roeck: "The only patch in this series is removal of voltage and current reporting for AMD Zen CPUs. Turns out that was not worth the trouble, because it's all undocumented and not maintainable" * tag 'hwmon-for-v5.11-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs
2020-12-22Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - support for a partial IOMMU bypass (Alexey Kardashevskiy) - add a DMA API benchmark (Barry Song) - misc fixes (Tiezhu Yang, tangjianqiang) * tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping: selftests/dma: add test application for DMA_MAP_BENCHMARK dma-mapping: add benchmark support for streaming DMA APIs dma-contiguous: fix a typo error in a comment dma-pool: no need to check return value of debugfs_create functions powerpc/dma: Fallback to dma_ops when persistent memory present dma-mapping: Allow mixing bypass and mapped DMA operation
2020-12-22Merge tag 'configfs-5.11' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs update from Christoph Hellwig: "Fix a kerneldoc comment (Alex Shi)" * tag 'configfs-5.11' of git://git.infradead.org/users/hch/configfs: configfs: fix kernel-doc markup issue
2020-12-22Merge tag 'exfat-for-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat update from Namjae Jeon: "Avoid page allocation failure from upcase table allocation" * tag 'exfat-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: Avoid allocating upcase table using kcalloc()
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 18:20:56 +0000