| Age | Commit message (Collapse) | Author |
|---|
|
Generally, in the path manager interfaces, the local address is defined
as an mptcp_pm_addr_entry type address, while the remote address is
defined as an mptcp_addr_info type one:
(struct mptcp_pm_addr_entry *local, struct mptcp_addr_info *remote)
But the set_flags() interface uses two mptcp_pm_addr_entry type
parameters.
This patch changes the second one to mptcp_addr_info type and use helper
mptcp_pm_parse_addr() to parse it instead of using mptcp_pm_parse_entry().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The first parameter 'skb' in mptcp_pm_nl_set_flags() is only used to
obtained the network namespace, which can also be obtained through the
second parameters 'info' by using genl_info_net() helper.
This patch drops these useless parameters 'skb' in all three set_flags()
interfaces.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The netlink messages are sent both in mptcp_pm_nl_get_addr() and
mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive.
This is because the netlink PM and userspace PM use different locks to
protect the address entry that needs to be sent via the netlink message.
The former uses rcu read lock, and the latter uses msk->pm.lock.
The current get_addr() flow looks like this:
lock();
entry = get_entry();
send_nlmsg(entry);
unlock();
After holding the lock, get the entry from the list, send the entry, and
finally release the lock.
This patch changes the process by getting the entry while holding the lock,
then making a copy of the entry so that the lock can be released. Finally,
the copy of the entry is sent without locking:
lock();
entry = get_entry();
*copy = *entry;
unlock();
send_nlmsg(copy);
This way we can reuse the send_nlmsg() code in get_addr() interfaces
between the netlink PM and userspace PM. They only need to implement their
own get_addr() interfaces to hold the different locks, get the entry from
the different lists, then release the locks.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The address id is parsed both in mptcp_pm_nl_get_addr() and
mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive.
So this patch adds a new parameter 'id' for all get_addr() interfaces.
The address id is only parsed in mptcp_pm_nl_get_addr_doit(), then pass
it to both mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The first parameters 'skb' of get_addr() interfaces are now useless
since mptcp_userspace_pm_get_sock() helper is used. This patch drops
these useless parameters of them.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Three netlink functions:
mptcp_pm_nl_get_addr_doit()
mptcp_pm_nl_get_addr_dumpit()
mptcp_pm_nl_set_flags_doit()
are generic, implemented for each PM, in-kernel PM and userspace PM. It's
clearer to move them from pm_netlink.c to pm.c.
And the linked three path manager wrappers
mptcp_pm_get_addr()
mptcp_pm_dump_addr()
mptcp_pm_set_flags()
can be changed as static functions, no need to export them in protocol.h.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of only returning a text message with GENL_SET_ERR_MSG(),
NL_SET_ERR_MSG_ATTR() can help the userspace developers by also
reporting which attribute is faulty.
When the error is specific to an attribute, NL_SET_ERR_MSG_ATTR() is now
used. The error messages have not been modified in this commit.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mptcp_pm_parse_entry() will check if the given attribute is defined. If
not, it will return a generic error: "missing address info".
It might then not be clear for the userspace developer which attribute
is missing, especially when the command takes multiple addresses.
By using GENL_REQ_ATTR_CHECK(), the userspace will get a hint about
which attribute is missing, making thing clearer. Note that this is what
was already done for most of the other MPTCP NL commands, this patch
simply adds the missing ones.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mptcp_pm_parse_entry() and mptcp_pm_parse_addr() will already set a
error message in case of parsing issue.
Then, no need to override this error message with another less precise
one: "error parsing address".
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A more general way to check if MPTCP_PM_ATTR_* exists in 'info'
is to use GENL_REQ_ATTR_CHECK(info, MPTCP_PM_ATTR_*) instead of
directly reading info->attrs[MPTCP_PM_ATTR_*] and then checking
if it's NULL.
So this patch uses GENL_REQ_ATTR_CHECK() for userspace PM in
mptcp_pm_nl_announce_doit(), mptcp_pm_nl_remove_doit(),
mptcp_pm_nl_subflow_create_doit(), mptcp_pm_nl_subflow_destroy_doit()
and mptcp_userspace_pm_get_sock().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some error messages were:
- too generic: "missing input", "invalid request"
- not precise enough: "limit greater than maximum" but what's the max?
- missing: subflow not found, or connect error.
This can be easily improved by being more precise, or adding new error
messages.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some errors reported by the userspace PM were vague: "this or that is
invalid".
It is easier for the userspace to know which part is wrong, instead of
having to guess that.
While at it, in mptcp_userspace_pm_set_flags() move the parsing after
the check linked to the local attribute.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since its introduction in commit 892f396c8e68 ("mptcp: netlink: issue
MP_PRIO signals from userspace PMs"), it was mandatory to specify the
remote address, because of the 'if (rem->addr.family == AF_UNSPEC)'
check done later one.
In theory, this attribute can be optional, but it sounds better to be
precise to avoid sending the MP_PRIO on the wrong subflow, e.g. if there
are multiple subflows attached to the same local ID. This can be relaxed
later on if there is a need to act on multiple subflows with one
command.
For the moment, the check to see if attr_rem is NULL can be removed,
because mptcp_pm_parse_entry() will do this check as well, no need to do
that differently here.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only use of 'info' parameter of userspace_pm_remove_id_zero_address()
is to set an error message into it.
Plus, this helper will only fail when it cannot find any subflows with a
local address ID 0.
This patch drops this parameter and sets the error message where this
function is called in mptcp_pm_nl_remove_doit().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change introduces a new selftest case to verify the functionality
of dumping IPv4 multicast addresses using the RTM_GETMULTICAST netlink
message. The test utilizes the ynl library to interact with the
netlink interface and validate that the kernel correctly reports the
joined IPv4 multicast addresses.
To run the test, execute the following command:
$ vng -v --user root --cpus 16 -- \
make -C tools/testing/selftests TARGETS=net \
TEST_PROGS=rtnetlink.py TEST_GEN_PROGS="" run_tests
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-2-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extended RTM_GETMULTICAST to support dumping joined IPv4 multicast
addresses, in addition to the existing IPv6 functionality. This allows
userspace applications to retrieve both IPv4 and IPv6 multicast
addresses through similar netlink command and then monitor future
changes by registering to RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.
For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.
To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The device is able to checksum plain TCP / UDP packets over IPv4 / IPv6
when the 'ipcs' bit in the send descriptor is set. Advertise support for
the 'NETIF_F_IP{,6}_CSUM' features in net devices registered by the
driver and VLAN uppers and set the 'ipcs' bit when the stack requests Tx
checksum offload.
Note that the device also calculates the IPv4 checksum, but it first
zeroes the current checksum so there should not be any difference
compared to the checksum calculated by the kernel.
On SN5600 (Spectrum-4) there is about 10% improvement in Tx packet rate
with 1400 byte packets when using pktgen.
Tested on Spectrum-{1,2,3,4} with all the combinations of IPv4 / IPv6,
TCP / UDP, with and without VLAN.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8dc86c95474ce10572a0fa83b8adb0259558e982.1738950446.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have separate Env classes for local tests and tests with a remote
endpoint. Make it easier to share the code by creating a base class.
Make env loading a method of this class.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem doesn't need libmnl, remove the unnecessary include.
Since YNL doesn't depend on libmnl either, any more, it's actually
possible to build selftests without having libmnl installed.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250207183119.1721424-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
fib: rules: Convert RTM_NEWRULE and RTM_DELRULE to per-netns RTNL.
Patch 1 ~ 2 are small cleanup, and patch 3 ~ 8 make fib_nl_newrule()
and fib_nl_delrule() hold per-netns RTNL.
v1: https://lore.kernel.org/20250206084629.16602-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250207072502.87775-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fib_nl_delrule() is the doit() handler for RTM_DELRULE but also called
from vrf_newlink() in case something fails in vrf_add_fib_rules().
In the latter case, RTNL is already held and the 4th arg is true.
Let's hold per-netns RTNL in fib_delrule() if rtnl_held is false.
Now we can place ASSERT_RTNL_NET() in call_fib_rule_notifiers().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will hold RTNL just before calling fib_nl2rule_rtnl() in
fib_delrule() and release it before kfree(nlrule).
Let's add a new rule to make the following change cleaner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fib_nl_newrule() is the doit() handler for RTM_NEWRULE but also called
from vrf_newlink().
In the latter case, RTNL is already held and the 4th arg is true.
Let's hold per-netns RTNL in fib_newrule() if rtnl_held is false.
Note that we call fib_rule_get() before releasing per-netns RTNL to call
notify_rule_change() without RTNL and prevent freeing the new rule.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fib_nl_newrule() / fib_nl_delrule() is the doit() handler for
RTM_NEWRULE / RTM_DELRULE but also called from vrf_newlink().
Currently, we hold RTNL on both paths but will not on the former.
Also, we set dev_net(dev)->rtnl to skb->sk in vrf_fib_rule() because
fib_nl_newrule() / fib_nl_delrule() fetch net as sock_net(skb->sk).
Let's Factorise the two functions and pass net and rtnl_held flag.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following patch will not set skb->sk from VRF path.
Let's fetch net from fib_rule->fr_net instead of sock_net(skb->sk)
in fib[46]_rule_configure().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will move RTNL down to fib_nl_newrule() and fib_nl_delrule().
Some operations in fib_nl2rule() require RTNL: fib_default_rule_pref()
and __dev_get_by_name().
Let's split the RTNL parts as fib_nl2rule_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb is not used in fib_nl2rule() other than sock_net(skb->sk),
which is already available in callers, fib_nl_newrule() and
fib_nl_delrule().
Let's pass net directly to fib_nl2rule().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fib_nl_newrule() / fib_nl_delrule() looks up struct fib_rules_ops
in sock_net(skb->sk) and calls rule_exists() / rule_find() respectively.
fib_nl_newrule() creates a new rule and links it to the found ops, so
struct fib_rule never belongs to a different netns's ops->rules_list.
Let's remove redundant netns check in rule_exists() and rule_find().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Akihiko Odaki says:
====================
tun: Unify vnet implementation
When I implemented virtio's hash-related features to tun/tap [1],
I found tun/tap does not fill the entire region reserved for the virtio
header, leaving some uninitialized hole in the middle of the buffer
after read()/recvmesg().
This series fills the uninitialized hole. More concretely, the
num_buffers field will be initialized with 1, and the other fields will
be inialized with 0. Setting the num_buffers field to 1 is mandated by
virtio 1.0 [2].
The change to virtio header is preceded by another change that refactors
tun and tap to unify their virtio-related code.
[1]: https://lore.kernel.org/r/20241008-rss-v5-0-f3cf68df005d@daynix.com
[2]: https://lore.kernel.org/r/20241227084256-mutt-send-email-mst@kernel.org/
====================
Link: https://patch.msgid.link/20250207-tun-v6-0-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tun and tap implements the same vnet-related features so reuse the code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-7-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hdr_len is repeatedly used so keep it in a local variable.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-6-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The vnet handling code will be reused by tap.
Functions are renamed to ensure that their names contain "vnet" to
clarify that they are part of the decoupled vnet handling code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-5-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Decouple the vnet handling code so that we can reuse it for tap.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-4-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Decouple vnet-related functions from tun_struct so that we can reuse
them for tap in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-3-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hdr_len is repeatedly used so keep it in a local variable.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-2-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check IS_ENABLED(CONFIG_TUN_VNET_CROSS_LE) to save some lines and make
future changes easier.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250207-tun-v6-1-fb49cf8b103e@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sean Anderson says:
====================
net: xilinx: axienet: Enable adaptive IRQ coalescing with DIM
To improve performance without sacrificing latency under low load,
enable DIM. While I appreciate not having to write the library myself, I
do think there are many unusual aspects to DIM, as detailed in the last
patch.
====================
Link: https://patch.msgid.link/20250206201036.1516800-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default RX IRQ coalescing settings of one IRQ per packet can represent
a significant CPU load. However, increasing the coalescing unilaterally
can result in undesirable latency under low load. Adaptive IRQ
coalescing with DIM offers a way to adjust the coalescing settings based
on load.
This device only supports "CQE" mode [1], where each packet resets the
timer. Therefore, an interrupt is fired either when we receive
coalesce_count_rx packets or when the interface is idle for
coalesce_usec_rx. With this in mind, consider the following scenarios:
Link saturated
Here we want to set coalesce_count_rx to a large value, in order to
coalesce more packets and reduce CPU load. coalesce_usec_rx should
be set to at least the time for one packet. Otherwise the link will
be "idle" and we will get an interrupt for each packet anyway.
Bursts of packets
Each burst should be coalesced into a single interrupt, although it
may be prudent to reduce coalesce_count_rx for better latency.
coalesce_usec_rx should be set to at least the time for one packet
so bursts are coalesced. However, additional time beyond the packet
time will just increase latency at the end of a burst.
Sporadic packets
Due to low load, we can set coalesce_count_rx to 1 in order to
reduce latency to the minimum. coalesce_usec_rx does not matter in
this case.
Based on this analysis, I expected the CQE profiles to look something
like
usec = 0, pkts = 1 // Low load
usec = 16, pkts = 4
usec = 16, pkts = 16
usec = 16, pkts = 64
usec = 16, pkts = 256 // High load
Where usec is set to 16 to be a few us greater than the 12.3 us packet
time of a 1500 MTU packet at 1 GBit/s. However, the CQE profile is
instead
usec = 2, pkts = 256 // Low load
usec = 8, pkts = 128
usec = 16, pkts = 64
usec = 32, pkts = 64
usec = 64, pkts = 64 // High load
I found this very surprising. The number of coalesced packets
*decreases* as load increases. But as load increases we have more
opportunities to coalesce packets without affecting latency as much.
Additionally, the profile *increases* the usec as the load increases.
But as load increases, the gaps between packets will tend to become
smaller, making it possible to *decrease* usec for better latency at the
end of a "burst".
I consider the default CQE profile unsuitable for this NIC. Therefore,
we use the first profile outlined in this commit instead.
coalesce_usec_rx is set to 16 by default, but the user can customize it.
This may be necessary if they are using jumbo frames. I think adjusting
the profile times based on the link speed/mtu would be good improvement
for generic DIM.
In addition to the above profile problems, I noticed the following
additional issues with DIM while testing:
- DIM tends to "wander" when at low load, since the performance gradient
is pretty flat. If you only have 10p/ms anyway then adjusting the
coalescing settings will not affect throughput very much.
- DIM takes a long time to adjust back to low indices when load is
decreased following a period of high load. This is because it only
re-evaluates its settings once every 64 interrupts. However, at low
load 64 interrupts can be several seconds.
Finally: performance. This patch increases receive throughput with
iperf3 from 840 Mbits/sec to 938 Mbits/sec, decreases interrupts from
69920/sec to 316/sec, and decreases CPU utilization (4x Cortex-A53) from
43% to 9%.
[1] Who names this stuff?
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250206201036.1516800-5-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cr variables now contain the same values as the control registers
themselves. Extract/calculate the values from the variables instead of
saving the user-specified values. This allows us to remove some
bookeeping, and also lets the user know what the actual coalesce
settings are.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250206201036.1516800-4-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for adaptive IRQ coalescing, we first need to support
adjusting the settings at runtime. The existing code doesn't require any
locking because
- dma_start is the only function that modifies rx/tx_dma_cr. It is
always called with IRQs and NAPI disabled, so nothing else is touching
the hardware.
- The IRQs don't race with poll, since the latter is a softirq.
- The IRQs don't race with dma_stop since they both just clear the
control registers.
- dma_stop doesn't race with poll since the former is called with NAPI
disabled.
However, once we introduce another function that modifies rx/tx_dma_cr,
we need to have some locking to prevent races. Introduce two locks to
protect these variables and their registers.
The control register values are now generated where the coalescing
settings are set. Converting coalescing settings to control register
values may require sleeping because of clk_get_rate. However, the
read/modify/write of the control registers themselves can't sleep
because it needs to happen in IRQ context. By pre-calculating the
control register values, we avoid introducing an additional mutex.
Since axienet_dma_start writes the control settings when it runs, we
don't bother updating the CR registers when rx/tx_dma_started is false.
This prevents any issues from writing to the control registers in the
middle of a reset sequence.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250206201036.1516800-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Combine the common parts of the CR calculations for better code reuse.
While we're at it, simplify the code a bit.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250206201036.1516800-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexander Lobakin says:
====================
xsk: the lost bits from Chapter III
Before introducing libeth_xdp, we need to add a couple more generic
helpers. Notably:
* 01: add generic loop unrolling hint helpers;
* 04: add helper to get both xdp_desc's DMA address and metadata
pointer in one go, saving several cycles and hotpath object
code size in drivers (especially when unrolling).
Bonus:
* 02, 03: convert two drivers which were using custom macros to
generic unrolled_count() (trivial, no object code changes).
====================
Link: https://patch.msgid.link/20250206182630.3914318-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when your driver supports XSk Tx metadata and you want to
send an XSk frame, you need to do the following:
* call external xsk_buff_raw_get_dma();
* call inline xsk_buff_get_metadata(), which calls external
xsk_buff_raw_get_data() and then do some inline checks.
This effectively means that the following piece:
addr = pool->unaligned ? xp_unaligned_add_offset_to_addr(addr) : addr;
is done twice per frame, plus you have 2 external calls per frame, plus
this:
meta = pool->addrs + addr - pool->tx_metadata_len;
if (unlikely(!xsk_buff_valid_tx_metadata(meta)))
is always inlined, even if there's no meta or it's invalid.
Add xsk_buff_raw_get_ctx() (xp_raw_get_ctx() to be precise) to do that
in one go. It returns a small structure with 2 fields: DMA address,
filled unconditionally, and metadata pointer, non-NULL only if it's
present and valid. The address correction is performed only once and
you also have only 1 external call per XSk frame, which does all the
calculations and checks outside of your hotpath. You only need to
check `if (ctx.meta)` for the metadata presence.
To not copy any existing code, derive address correction and getting
virtual and DMA address into small helpers. bloat-o-meter reports no
object code changes for the existing functionality.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice, same as i40e, has a custom loop unrolling macros for unrolling
Tx descriptors filling on XSk xmit.
Replace ice defs with generic unrolled_count(), which is also more
convenient as it allows passing defines as its argument, not hardcoded
values, while the loop declaration will still be usual for-loop.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
i40e, as well as ice, has a custom loop unrolling macro for unrolling
Tx descriptors filling on XSk xmit.
Replace i40e defs with generic unrolled_count(), which is also more
convenient as it allows passing defines as its argument, not hardcoded
values, while the loop declaration will still be a usual for-loop.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are cases when we need to explicitly unroll loops. For example,
cache operations, filling DMA descriptors on very high speeds etc.
Add compiler-specific attribute macros to give the compiler a hint
that we'd like to unroll a loop.
Example usage:
#define UNROLL_BATCH 8
unrolled_count(UNROLL_BATCH)
for (u32 i = 0; i < UNROLL_BATCH; i++)
op(priv, i);
Note that sometimes the compilers won't unroll loops if they think this
would have worse optimization and perf than without unrolling, and that
unroll attributes are available only starting GCC 8. For older compiler
versions, no hints/attributes will be applied.
For better unrolling/parallelization, don't have any variables that
interfere between iterations except for the iterator itself.
Co-developed-by: Jose E. Marchesi <jose.marchesi@oracle.com> # pragmas
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add LED brightness, mode, HW control and polarity functions to enable
external LED control in the TI DP83TD510 PHY.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250205103846.2273833-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
