summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-22perf ui/tui: Show fatal error message only if existsNamhyung Kim
When perf exits with some error it shows the error message with ui__error() or ui__warning() and then calls ui__exit() during exit_browser(). On TUI, it then shows a window titled "Fatal Error" to inform user a last message which might be related with this condition. However it sometimes contains no message and just annoyes users. The usual case for this is running perf top as normal user. (And /proc/sys/kernel/perf_event_paranoid being 1). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421736050-5283-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22perf tests: Fix typo in sample-parsing.cRasmus Villemoes
It was testing the same buffer for differences: memcmp(s1->user_stack.data, s1->user_stack.data, s1->user_stack.size) I'm pretty sure this wasn't supposed to be dead code. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421946083-29863-1-git-send-email-linux@rasmusvillemoes.dk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs debugfs: Check if debugfs is mounted when handling ENOENTArnaldo Carvalho de Melo
If debugfs was already mounted, then its a matter of not finding the tracepoint, tell the user that perhaps a CONFIG_ setting is not enabled. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6chfytoflyx3jwfqm7ebltu0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs debugfs: Introduce debugfs__strerror_open_tpArnaldo Carvalho de Melo
There will be other cases where not just a tracepoint event is being opened below the debugfs mountpoint, but it is rather common, so provide one helper for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-q6e6zct49ql6nbcw8kkg0lbj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22MAINTAINERS: Update Richard Zhu's email addressLucas Stach
The old cryptic address bounces, fix it by using a properly working one. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
2015-01-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Five more bug fixes from Michael for the s390 BPF jit" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/bpf: Zero extend parameters before calling C function s390/bpf: Fix sk_load_byte_msh() s390/bpf: Fix offset parameter for skb_copy_bits() s390/bpf: Fix skb_copy_bits() parameter passing s390/bpf: Fix JMP_JGE_K (A >= K) and JMP_JGT_K (A > K)
2015-01-23Merge tag 'nios2-fixes-v3.19-rc6' of ↵Linus Torvalds
git://git.rocketboards.org/linux-socfpga-next Pull one arch/nios2 fix from Ley Foon Tan: "Fix kuser trampoline address" * tag 'nios2-fixes-v3.19-rc6' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix kuser trampoline address
2015-01-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module and param fixes from Rusty Russell: "Surprising number of fixes this merge window :( The first two are minor fallout from the param rework which went in this merge window. The next three are a series which fixes a longstanding (but never previously reported and unlikely , so no CC stable) race between kallsyms and freeing the init section. Finally, a minor cleanup as our module refcount will now be -1 during unload" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: make module_refcount() a signed integer. module: fix race in kallsyms resolution during module load success. module: remove mod arg from module_free, rename module_memfree(). module_arch_freeing_init(): new hook for archs before module->module_init freed. param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC param: initialize store function to NULL if not available.
2015-01-22MAINTAINERS: ibmvscsi driver maintainer changeTyrel Datwyler
Change maintainer of ibmvscsi driver to Tyrel Datwyler. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-22MAINTAINERS: ibmvfc driver maintainer changeTyrel Datwyler
Change maintainer of ibmvfc driver to Tyrel Datwyler. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-22MAINTAINERS: Remove self as isci maintainerDave Jiang
Removing myself as a maintainer. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-22scsi_debug: test always evaluates to false, || should be used insteadColin Ian King
cppcheck found the following issue: (warning) Logical conjunction always evaluates to false: alloc_len < 4 && alloc_len > 65535. ..the test should be instead: if (alloc_len < 4 || alloc_len > 65536) This error was introduced by recent commit 38d5c8336e60bf6e53a1da9 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-22drm/radeon: Remove rdev->gart.pages_addr arrayMichel Dänzer
radeon_vm_map_gart can use rdev->gart.pages_entry instead. Also move the masking of the page address to radeon_vm_map_gart from its callers. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-22drm/radeon: Restore GART table contents after pinning it in VRAM v3Michel Dänzer
The GART table BO has to be moved out of VRAM for suspend/resume. Any updates to the GART table during that time were silently dropped without this change. This caused GPU lockups on resume in some cases, see the bug reports referenced below. This might also make GPU reset more robust in some cases, as we no longer rely on the GART table in VRAM being preserved across the GPU lockup/reset. v2: Add logic to radeon_gart_table_vram_pin directly instead of reinstating radeon_gart_restore v3: Move code after assignment of rdev->gart.table_addr so that the GART TLB flush can work as intended, add code comment explaining why we're doing this Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267 Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-22drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entryMichel Dänzer
get_page_entry calculates the GART page table entry, which is just written to the GART page table by set_page_entry. This is a prerequisite for the following fix. Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-22of/platform: Handle of_populate drivers in notifierPantelis Antoniou
When using overlays with drivers calling of_populate the notifier will try to create the device twice. Using the populated bit before proceeding protects against this. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-01-22of/overlay: Do not generate duplicate nodesPantelis Antoniou
During the course of the rewrites a bug sneaked in when dealing with children nodes of overlays, which ends up duplicating sub nodes. Simply remove the duplicate traversal of child nodes to fix. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-01-22cgroup: prevent mount hang due to memory controller lifetimeJohannes Weiner
Since b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups"), re-mounting the memory controller after using it is very likely to hang. The cgroup core assumes that any remaining references after deleting a cgroup are temporary in nature, and synchroneously waits for them, but the above-mentioned commit has left-over page cache pin its css until it is reclaimed naturally. That being said, swap entries and charged kernel memory have been doing the same indefinite pinning forever, the bug is just more likely to trigger with left-over page cache. Reparenting kernel memory is highly impractical, which leaves changing the cgroup assumptions to reflect this: once a controller has been mounted and used, it has internal state that is independent from mount and cgroup lifetime. It can be unmounted and remounted, but it can't be reconfigured during subsequent mounts. Don't offline the controller root as long as there are any children, dead or alive. A remount will no longer wait for these old references to drain, it will simply mount the persistent controller state again. Reported-by: "Suzuki K. Poulose" <Suzuki.Poulose@arm.com> Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-22perf trace: Fix error reporting for evsel pgfault constructorArnaldo Carvalho de Melo
In that case the only failure possible is not to have enough memory, as we are just creating the evsels, not trying to access any system facility such as debugfs files or syscalls. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7k6asvfhiwiu2zs6o2oknchk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs: Pass filename to debugfs__strerror_openArnaldo Carvalho de Melo
It was hardcoded for one specific tracepoint, leftover from its initial user: 'perf trace'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-j1jicvwljy5qx1nah4mkmyke@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs: Adopt debugfs open strerrno methodArnaldo Carvalho de Melo
As this is not specific to an evlist and may be used with other tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a9up9mivx1pzdf5tqrqsx62d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> tools/perf/util/include/asm/hash.h
2015-01-22Merge branch 'fortglx/3.19-stable/time' of ↵Thomas Gleixner
https://git.linaro.org/people/john.stultz/linux into timers/urgent Pull urgent fixes from John Stultz: Two urgent fixes for user triggerable time related overflow issues
2015-01-22drm/amdkfd: Fix bug in call to init_pipelines()Oded Gabbay
This patch fixes a bug where the first_pipe index passed into init_pipelines() was a #define instead of the value that is passed into amdkfd by radeon Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-01-22nios2: fix kuser trampoline addressLey Foon Tan
__kuser_sigtramp address should be 0x1044 instead of 0x1040. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-01-22drm/amdkfd: Fix bug in pipelines initializationOded Gabbay
This patch fixes a bug when calling to init_pipeline() interface. The index that was passed to that function didn't take into account the first_pipe value, which represents the first pipe index that is under amdkfd's responsibility. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-01-22drm/radeon: Don't increment pipe_id in kgd_init_pipelineOded Gabbay
This patch fixes the behavior of kgd_init_pipeline in that this function shouldn't automatically increase the pipe_id argument by 1 right at the start of the function. This is because the first_pipe value might not be always 1, and because a proper interface function should not hide this info inside its implementation. In other words, the calling function should provide the real pipe_id and not count on kgd_init_pipeline to "fix" it. Signed-off-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-01-22powerpc/powernv: Restore LPCR with LPCR_PECE1 clearedShreyas B. Prabhu
LPCR_PECE1 bit controls whether decrementer interrupts are allowed to cause exit from power-saving mode. While waking up from winkle, restoring LPCR with LPCR_PECE1 set (i.e Decrementer interrupts allowed) can cause issue in the following scenario: - All the threads in a core are offlined. The core enters deep winkle. - Spurious interrupt wakes up a thread in the core. Here LPCR is restored with LPCR_PECE1 bit set. - Since it was a spurious interrupt on a offline thread, the thread clears the interrupt and goes back to winkle. - Here before the thread executes winkle and puts the core into deep winkle, if a decrementer interrupt occurs on any of the sibling threads in the core that thread wakes up. - Since in offline loop we are flushing interrupt only in case of external interrupt, the decrementer interrupt does not get flushed. So at this stage the thread is stuck in this is loop of waking up at 0x100 due to decrementer interrupt, not flushing the interrupt as only external interrupts get flushed, entering winkle, waking up at 0x100 again. Fix this by programming PORE to restore LPCR with LPCR_PECE1 bit cleared when waking up from winkle. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21Merge tag 'renesas-soc-fixes2-for-v3.19' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Second Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: * Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779 * tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-22module: make module_refcount() a signed integer.Rusty Russell
James Bottomley points out that it will be -1 during unload. It's only used for diagnostics, so let's not hide that as it could be a clue as to what's gone wrong. Cc: Jason Wessel <jason.wessel@windriver.com> Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-22Merge branch 'vmwgfx-fixes-3.19' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes fix a vmwgfx regression sleeping wrong task state. * 'vmwgfx-fixes-3.19' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Replace the hw mutex with a hw spinlock
2015-01-21[media] omap3isp: Correctly set QUERYCAP capabilitiesSakari Ailus
device_caps in struct v4l2_capability were inadequately set in VIDIOC_QUERYCAP. Fix this. Without this a WARN_ON in the v4l2 core is triggered. This WARN_ON was added for kernel 3.19 exactly to detect these situations. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] cx23885: fix free interrupt bugHans Verkuil
First free the interrupt, then disable the PCI device. The other way around will lead to this warning: Jan 19 11:42:02 telek kernel: [ 1440.161234] WARNING: CPU: 0 PID: 2191 at kernel/irq/manage.c:1311 __free_irq+0x97/0x1f0() Jan 19 11:42:02 telek kernel: [ 1440.161236] Trying to free already-free IRQ 0 Jan 19 11:42:02 telek kernel: [ 1440.161237] Modules linked in: tda8290 tda10048 cx25840 cx23885(-) altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core v4l2_common videodev media nouveau x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci Jan 19 11:42:02 telek kernel: [ 1440.161266] CPU: 0 PID: 2191 Comm: rmmod Tainted: G W 3.19.0-rc1-telek #345 Jan 19 11:42:02 telek kernel: [ 1440.161268] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 Jan 19 11:42:02 telek kernel: [ 1440.161270] ffffffff81bf1fce ffff8808958b7cc8 ffffffff8194a97f 0000000000000000 Jan 19 11:42:02 telek kernel: [ 1440.161274] ffff8808958b7d18 ffff8808958b7d08 ffffffff810c56b0 0000000000000286 Jan 19 11:42:02 telek kernel: [ 1440.161279] 0000000000000000 0000000000000000 ffff88089f808890 ffff88089f808800 Jan 19 11:42:02 telek kernel: [ 1440.161284] Call Trace: Jan 19 11:42:02 telek kernel: [ 1440.161290] [<ffffffff8194a97f>] dump_stack+0x4f/0x7b Jan 19 11:42:02 telek kernel: [ 1440.161295] [<ffffffff810c56b0>] warn_slowpath_common+0x80/0xc0 Jan 19 11:42:02 telek kernel: [ 1440.161299] [<ffffffff810c5731>] warn_slowpath_fmt+0x41/0x50 Jan 19 11:42:02 telek kernel: [ 1440.161303] [<ffffffff81955d36>] ? _raw_spin_lock_irqsave+0x56/0x70 Jan 19 11:42:02 telek kernel: [ 1440.161307] [<ffffffff81114849>] ? __free_irq+0x49/0x1f0 Jan 19 11:42:02 telek kernel: [ 1440.161311] [<ffffffff81114897>] __free_irq+0x97/0x1f0 Jan 19 11:42:02 telek kernel: [ 1440.161316] [<ffffffff81114a88>] free_irq+0x48/0xd0 Jan 19 11:42:02 telek kernel: [ 1440.161323] [<ffffffffa00e6deb>] cx23885_finidev+0x4b/0x90 [cx23885] Jan 19 11:42:02 telek kernel: [ 1440.161329] [<ffffffff814529fa>] pci_device_remove+0x3a/0xc0 Jan 19 11:42:02 telek kernel: [ 1440.161334] [<ffffffff8153b4ea>] __device_release_driver+0x7a/0xf0 Jan 19 11:42:02 telek kernel: [ 1440.161338] [<ffffffff8153bc98>] driver_detach+0xc8/0xd0 Jan 19 11:42:02 telek kernel: [ 1440.161341] [<ffffffff8153b1de>] bus_remove_driver+0x4e/0xb0 Jan 19 11:42:02 telek kernel: [ 1440.161345] [<ffffffff8153c2eb>] driver_unregister+0x2b/0x60 Jan 19 11:42:02 telek kernel: [ 1440.161349] [<ffffffff814525c5>] pci_unregister_driver+0x25/0x70 Jan 19 11:42:02 telek kernel: [ 1440.161355] [<ffffffffa00f6ddc>] cx23885_fini+0x10/0x12 [cx23885] Jan 19 11:42:02 telek kernel: [ 1440.161360] [<ffffffff81139a98>] SyS_delete_module+0x1a8/0x1f0 Jan 19 11:42:02 telek kernel: [ 1440.161364] [<ffffffff819561a9>] system_call_fastpath+0x12/0x17 Jan 19 11:42:02 telek kernel: [ 1440.161367] ---[ end trace a9c07cb5f3357020 ]--- Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] pvrusb2: fix missing device_caps in querycapHans Verkuil
The VIDIOC_QUERYCAP function should set device_caps, but this was missing. In addition, it set the version field as well, but that should be done by the core, not by the driver. If a driver doesn't set device_caps the v4l2 core will issue a WARN_ON, so it's important that this is set correctly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] vb2: fix vb2_thread_stop race conditionsHans Verkuil
The locking scheme inside the vb2 thread is unsafe when stopping the thread. In particular kthread_stop was called *after* internal data structures were cleaned up instead of doing that before. In addition, internal vb2 functions were called after threadio->stop was set to true and vb2_internal_streamoff was called. This is also not allowed. All this led to a variety of race conditions and kernel warnings and/or oopses. Fixed by moving the kthread_stop call up before the cleanup takes place, and by checking threadio->stop before calling internal vb2 queuing operations. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v3.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] rcar_vin: Update device_caps and capabilities in querycapNobuhiro Iwamatsu
The V4L2 API requires both .capabilities and .device_caps fields of struct v4l2_capability to be set. Otherwise the compliance checker complains and since commit "v4l2-ioctl: WARN_ON if querycap didn't fill device_caps" a compile-time warning is issued. Fix this non-compliance in the rcar_vin driver. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] soc-camera: fix device capabilities in multiple camera host driversGuennadi Liakhovetski
The V4L2 API requires both .capabilities and .device_caps fields of struct v4l2_capability to be set. Otherwise the compliance checker complains and since commit "v4l2-ioctl: WARN_ON if querycap didn't fill device_caps" a compile-time warning is issued. Fix this non-compliance in several soc-camera camera host drivers. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] Fix Mygica T230 supportJonathan McDowell
Commit 2adb177e57417cf8409e86bda2c516e5f99a2099 removed 2 devices from the cxusb device table but failed to fix up the T230 properties that follow, meaning that this device no longer gets detected properly. Adjust the cxusb_table index appropriate so detection works. Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entryMatthias Schwarzott
Unconditionally attaching Si2161/Si2165 demod driver breaks Hauppauge WinTV Starburst. So create own card entry for this. Add card name comments to the subsystem ids. This fixes a regression introduced in 3.17 by 36efec48e2e6016e05364906720a0ec350a5d768 ([media] cx23885: Add si2165 support for HVR-5500) Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> CC: stable@vger.kernel.org # for 3.17 and upper Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21[media] tlg2300: Fix media dependenciesMauro Carvalho Chehab
X-Patchwork-Delegate: m.chehab@samsung.com Changeset ea2e813e8cc3 moved the driver to staging, but it forgot to preserve the existing dependency. Fixes: ea2e813e8cc3 ("[media] tlg2300: move to staging in preparation for removal") Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-21NFS: Fix use of nfs_attr_use_mounted_on_fileid()Anna Schumaker
This function call was being optimized out during nfs_fhget(), leading to situations where we have a valid fileid but still want to use the mounted_on_fileid. For example, imagine we have our server configured like this: server % df Filesystem Size Used Avail Use% Mounted on /dev/vda1 9.1G 6.5G 1.9G 78% / /dev/vdb1 487M 2.3M 456M 1% /exports /dev/vdc1 487M 2.3M 456M 1% /exports/vol1 /dev/vdd1 487M 2.3M 456M 1% /exports/vol2 If our client mounts /exports and tries to do a "chown -R" across the entire mountpoint, we will get a nasty message warning us about a circular directory structure. Running chown with strace tells me that each directory has the same device and inode number: newfstatat(AT_FDCWD, "/nfs/", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0 newfstatat(4, "vol1", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0 newfstatat(4, "vol2", {st_dev=makedev(0, 38), st_ino=2, ...}) = 0 With this patch the mounted_on_fileid values are used for st_ino, so the directory loop warning isn't reported. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-21NFSv4.1: Fix an Oops in nfs41_walk_client_listTrond Myklebust
If we start state recovery on a client that failed to initialise correctly, then we are very likely to Oops. Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de> Link: http://lkml.kernel.org/r/130621862.279655.1421851650684.JavaMail.zimbra@desy.de Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-21nfs: fix dio deadlock when O_DIRECT flag is flippedPeng Tao
We only support swap file calling nfs_direct_IO. However, application might be able to get to nfs_direct_IO if it toggles O_DIRECT flag during IO and it can deadlock because we grab inode->i_mutex in nfs_file_direct_write(). So return 0 for such case. Then the generic layer will fall back to buffer IO. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-01-21can: c_can: end pending transmission on network stop (ifdown)Viktor Babrian
Put controller into init mode in network stop to end pending transmissions. The issue is observed in cases when transmitted frame is not acked. Signed-off-by: Viktor Babrian <babrian.viktor@renyi.mta.hu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-01-22Merge tag 'trace-sh-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull superh tracing fix from Steven Rostedt: "It's been reported that function tracing does not work on the sh architecture because gcc 4.8 for superH does not support -m32, and the recordmcount.pl script adds "-m32" when re-compiling the object files with the mcount locations. I was not able to reproduce this problem, as it seems that -m32 works fine for my cross compiler gcc 4.6.3, but I have to assume that -m32 was deprecated somewhere between 4.6 and 4.8. As it still seems to compile fine without -m32, I have no reason not to add this patch, as having -m32 seems to cause trouble for others" * tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
2015-01-21perf diff: Fix -o/--order option behaviorNamhyung Kim
The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Fix output ordering to honor next columnNamhyung Kim
When perf diff prints output, it sorts the entries using baseline field by default, but entries which don't have baseline are not sorted properly. This patch makes it sorted by values of next column. Before: # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... # 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt 1.31% +0.03% -0.06% a.out [.] malloc@plt 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 After: # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... # 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt 1.31% +0.03% -0.06% a.out [.] malloc@plt 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-7-git-send-email-namhyung@kernel.org [ Fixed up hist_entry__cmp_ method signatures, fallout from making previous cset buildable ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Pass struct perf_hpp_fmt to its callbacksNamhyung Kim
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Introduce fmt_to_data_file() helperNamhyung Kim
The fmt_to_data_file() is to retrieve struct data__file from perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort callback functions later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Print diff result more preciselyNamhyung Kim
Current perf diff result is somewhat confusing since it sometimes hide small result and sometimes there's no result. So do not hide small result (less than 0.01%) and print "N/A" if baseline is not recorded (for ratio and wdiff only). Blank means the baseline is available but its pairs are not. Before: # Baseline Delta Shared Object Symbol # ........ ....... ................. ......................... # ... 0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% [kernel.kallsyms] [k] native_read_msr_safe 0.00% [kernel.kallsyms] [k] __rcu_read_unlock [kernel.kallsyms] [k] _raw_spin_lock +0.01% [kernel.kallsyms] [k] apic_timer_interrupt [kernel.kallsyms] [k] read_tsc After: # Baseline Delta Shared Object Symbol # ........ ....... ................. ......................... # ... 0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% [kernel.kallsyms] [k] native_read_msr_safe 0.00% [kernel.kallsyms] [k] __rcu_read_unlock +0.01% [kernel.kallsyms] [k] _raw_spin_lock +0.01% [kernel.kallsyms] [k] apic_timer_interrupt +0.01% [kernel.kallsyms] [k] read_tsc Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Get rid of hists__compute_resort()Namhyung Kim
The hists__compute_resort() is to sort output fields based on the given field/criteria. This was done without the sort list but as we added the field to the sort list, we can do it with normal hists__output_resort() using the ->sort callback. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 04:49:50 +0000