summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-18KVM: x86: hyper-v: Track Hyper-V TSC page statusVitaly Kuznetsov
Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it was updated from guest/host side or if we've failed to set it up (because e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no need to retry. Also, in a hypothetical situation when we are in 'always catchup' mode for TSC we can now avoid contending 'hv->hv_lock' on every guest enter by setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters() returns false. Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in get_time_ref_counter() to properly handle the situation when we failed to write the updated TSC page values to the guest. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandlesDmitry Osipenko
The tegra_smmu_probe_device() handles only the first IOMMU device-tree phandle, skipping the rest. Devices like 3D module on Tegra30 have multiple IOMMU phandles, one for each h/w block, and thus, only one IOMMU phandle is added to fwspec for the 3D module, breaking GPU. Previously this problem was masked by tegra_smmu_attach_dev() which didn't use the fwspec, but parsed the DT by itself. The previous commit to tegra-smmu driver partially reverted changes that caused problems for T124 and now we have tegra_smmu_attach_dev() that uses the fwspec and the old-buggy variant of tegra_smmu_probe_device() which skips secondary IOMMUs. Make tegra_smmu_probe_device() not to skip the secondary IOMMUs. This fixes a partially attached IOMMU of the 3D module on Tegra30 and now GPU works properly once again. Fixes: 765a9d1d02b2 ("iommu/tegra-smmu: Fix mc errors on tegra124-nyan") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210312155439.18477-1-digetx@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-03-18iommu/amd: Keep track of amd_iommu_irq_remap stateJoerg Roedel
The amd_iommu_irq_remap variable is set to true in amd_iommu_prepare(). But if initialization fails it is not set to false. Fix that and correctly keep track of whether irq remapping is enabled or not. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Fixes: b34f10c2dc59 ("iommu/amd: Stop irq_remapping_select() matching when remapping is disabled") Cc: stable@vger.kernel.org # v5.11 Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20210317091037.31374-4-joro@8bytes.org Acked-by: Huang Rui <ray.huang@amd.com>
2021-03-18iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabledJoerg Roedel
Don't even try to initialize the AMD IOMMU hardware when amd_iommu=off has been passed on the kernel command line. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Cc: stable@vger.kernel.org # v5.11 Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20210317091037.31374-3-joro@8bytes.org Acked-by: Huang Rui <ray.huang@amd.com>
2021-03-18iommu/amd: Move Stoney Ridge check to detect_ivrs()Joerg Roedel
The AMD IOMMU will not be enabled on AMD Stoney Ridge systems. Bail out even earlier and refuse to even detect the IOMMU there. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Cc: stable@vger.kernel.org # v5.11 Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20210317091037.31374-2-joro@8bytes.org Acked-by: Huang Rui <ray.huang@amd.com>
2021-03-18staging: vt665x: fix alignment constraintsEdmundo Carmona Antoranz
Removing 2 instances of alignment warnings drivers/staging/vt6655/rxtx.h:153:1: warning: alignment 1 of ‘struct vnt_cts’ is less than 2 [-Wpacked-not-aligned] drivers/staging/vt6655/rxtx.h:163:1: warning: alignment 1 of ‘struct vnt_cts_fb’ is less than 2 [-Wpacked-not-aligned] The root cause seems to be that _because_ struct ieee80211_cts is marked as __aligned(2), this requires any encapsulating struct to also have an alignment of 2. Fixes: 2faf12c57efe ("staging: vt665x: fix alignment constraints") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com> Link: https://lore.kernel.org/r/20210316181736.2553318-1-eantoranz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-18usb: typec: tcpm: Skip sink_cap query only when VDM sm is busyBadhri Jagan Sridharan
When port partner responds "Not supported" to the DiscIdentity command, VDM state machine can remain in NVDM_STATE_ERR_TMOUT and this causes querying sink cap to be skipped indefinitely. Hence check for vdm_sm_running instead of checking for VDM_STATE_DONE. Fixes: 8dc4bd073663f ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)") Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210318064805.3747831-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-18nvmet-tcp: fix kmap leak when data digest in useElad Grupi
When data digest is enabled we should unmap pdu iovec before handling the data digest pdu. Signed-off-by: Elad Grupi <elad.grupi@dell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18nvmet: don't check iosqes,iocqes for discovery controllersSagi Grimberg
From the base spec, Figure 78: "Controller Configuration, these fields are defined as parameters to configure an "I/O Controller (IOC)" and not to configure a "Discovery Controller (DC). ... If the controller does not support I/O queues, then this field shall be read-only with a value of 0h Just perform this check for I/O controllers. Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Reported-by: Belanger, Martin <Martin.Belanger@dell.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18nvme-rdma: fix possible hang when failing to set io queuesSagi Grimberg
We only setup io queues for nvme controllers, and it makes absolutely no sense to allow a controller (re)connect without any I/O queues. If we happen to fail setting the queue count for any reason, we should not allow this to be a successful reconnect as I/O has no chance in going through. Instead just fail and schedule another reconnect. Reported-by: Chao Leng <lengchao@huawei.com> Fixes: 711023071960 ("nvme-rdma: add a NVMe over Fabrics RDMA host driver") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18nvme-tcp: fix possible hang when failing to set io queuesSagi Grimberg
We only setup io queues for nvme controllers, and it makes absolutely no sense to allow a controller (re)connect without any I/O queues. If we happen to fail setting the queue count for any reason, we should not allow this to be a successful reconnect as I/O has no chance in going through. Instead just fail and schedule another reconnect. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18nvme-tcp: fix misuse of __smp_processor_id with preemption enabledSagi Grimberg
For our pure advisory use-case, we only rely on this call as a hint, so fix the warning complaints of using the smp_processor_id variants with preemption enabled. Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Fixes: ada831772188 ("nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDUSagi Grimberg
When the controller sends us a 0-length r2t PDU we should not attempt to try to set up a h2cdata PDU but rather conclude that this is a buggy controller (forward progress is not possible) and simply fail it immediately. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Belanger, Martin <Martin.Belanger@dell.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18nvme: fix Write Zeroes limitationsChristoph Hellwig
We voluntarily limit the Write Zeroes sizes to the MDTS value provided by the hardware, but currently get the units wrong, so fix that. Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
2021-03-18nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAITChristoph Hellwig
To avoid an error recovery deadlock where the keep alive work is waiting for a request and thus can't be flushed to make progress for tearing down the controller. Also print the error code returned from blk_mq_alloc_request to help debugging any future issues in this code. Based on an earlier patch from Hannes Reinecke <hare@suse.de>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de>
2021-03-18nvme: merge nvme_keep_alive into nvme_keep_alive_workChristoph Hellwig
Merge nvme_keep_alive into its only caller to prepare for additional changes to this code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de>
2021-03-18nvme-fabrics: only reserve a single tagChristoph Hellwig
Fabrics drivers currently reserve two tags on the admin queue. But given that the connect command is only run on a freshly created queue or after all commands have been force aborted we only need to reserve a single tag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de>
2021-03-18drm/amd/display: Remove MPC gamut remap logic for DCN30Dillon Varone
[Why?] Should only reroute gamut remap to mpc unless 3D LUT is not used and all planes are using the same src->dest. [How?] Remove DCN30 specific logic for rerouting gamut remap to mpc. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-18drm/amd/display: Correct algorithm for reversed gammaCalvin Hou
[Why] DCN30 needs to correctly program reversed gamma curve, which DCN20 already has. Also needs to fix a bug that 252-255 values are clipped. [How] Apply two fixes into DCN30. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Calvin Hou <Calvin.Hou@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Acked-by: Vladimir Stempen <Vladimir.Stempen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-17usb: dwc3: gadget: Prevent EP queuing while stopping transfersWesley Cheng
In the situations where the DWC3 gadget stops active transfers, once calling the dwc3_gadget_giveback(), there is a chance where a function driver can queue a new USB request in between the time where the dwc3 lock has been released and re-aquired. This occurs after we've already issued an ENDXFER command. When the stop active transfers continues to remove USB requests from all dep lists, the newly added request will also be removed, while controller still has an active TRB for it. This can lead to the controller accessing an unmapped memory address. Fix this by ensuring parameters to prevent EP queuing are set before calling the stop active transfers API. Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller") Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1615507142-23097-1-git-send-email-wcheng@codeaurora.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-Badhri Jagan Sridharan
tcpm-source-psy- does not invoke power_supply_changed API when one of the published power supply properties is changed. power_supply_changed needs to be called to notify userspace clients(uevents) and kernel clients. Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210317181249.1062995-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg structElias Rudberg
Remove the unused "u32 vdo[3]" part in the tps6598x_rx_identity_reg struct. This helps avoid "failed to register partner" errors which happen when tps6598x_read_partner_identity() fails because the amount of data read is 12 bytes smaller than the struct size. Note that vdo[3] is already in usb_pd_identity and hence shouldn't be added to tps6598x_rx_identity_reg as well. Fixes: f6c56ca91b92 ("usb: typec: Add the Product Type VDOs to struct usb_pd_identity") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Elias Rudberg <mail@eliasrudberg.se> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311124710.6563-1-mail@eliasrudberg.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usb-storage: Add quirk to defeat Kindle's automatic unloadAlan Stern
Matthias reports that the Amazon Kindle automatically removes its emulated media if it doesn't receive another SCSI command within about one second after a SYNCHRONIZE CACHE. It does so even when the host has sent a PREVENT MEDIUM REMOVAL command. The reason for this behavior isn't clear, although it's not hard to make some guesses. At any rate, the results can be unexpected for anyone who tries to access the Kindle in an unusual fashion, and in theory they can lead to data loss (for example, if one file is closed and synchronized while other files are still in the middle of being written). To avoid such problems, this patch creates a new usb-storage quirks flag telling the driver always to issue a REQUEST SENSE following a SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the Kindle with the flag set. This is sufficient to prevent the Kindle from doing its automatic unload, without interfering with proper operation. Another possible way to deal with this would be to increase the frequency of TEST UNIT READY polling that the kernel normally carries out for removable-media storage devices. However that would increase the overall load on the system and it is not as reliable, because the user can override the polling interval. Changing the driver's behavior is safer and has minimal overhead. CC: <stable@vger.kernel.org> Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usb: gadget: configfs: Fix KASAN use-after-freeJim Lin
When gadget is disconnected, running sequence is like this. . composite_disconnect . Call trace: usb_string_copy+0xd0/0x128 gadget_config_name_configuration_store+0x4 gadget_config_name_attr_store+0x40/0x50 configfs_write_file+0x198/0x1f4 vfs_write+0x100/0x220 SyS_write+0x58/0xa8 . configfs_composite_unbind . configfs_composite_bind In configfs_composite_bind, it has "cn->strings.s = cn->configuration;" When usb_string_copy is invoked. it would allocate memory, copy input string, release previous pointed memory space, and use new allocated memory. When gadget is connected, host sends down request to get information. Call trace: usb_gadget_get_string+0xec/0x168 lookup_string+0x64/0x98 composite_setup+0xa34/0x1ee8 If gadget is disconnected and connected quickly, in the failed case, cn->configuration memory has been released by usb_string_copy kfree but configfs_composite_bind hasn't been run in time to assign new allocated "cn->configuration" pointer to "cn->strings.s". When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling memory is accessed, "BUG: KASAN: use-after-free" error occurs. Cc: stable@vger.kernel.org Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usbip: Fix incorrect double assignment to udc->ud.tcp_rxColin Ian King
Currently udc->ud.tcp_rx is being assigned twice, the second assignment is incorrect, it should be to udc->ud.tcp_tx instead of rx. Fix this. Fixes: 46613c9dfa96 ("usbip: fix vudc usbip_sockfd_store races leading to gpf") Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210311104445.7811-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17Merge tag 'mips-fixes_5.12_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: "Fix for fdt alignment when image is compressed" * tag 'mips-fixes_5.12_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: vmlinux.lds.S: Fix appended dtb not properly aligned
2021-03-17Merge tag 'thermal-v5.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal framework fix from Daniel Lezcano: "Fix NULL pointer access when the cooling device transition stats table failed to allocate due to a big number of states (Manaf Meethalavalappu Pallikunhi)" * tag 'thermal-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/core: Add NULL pointer check before using cooling device stats
2021-03-17drm/omap: dsi: fix unsigned expression compared with zeroJunlin Yang
r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero. so r < 0 condition is never accessible. Fixes coccicheck warnings: ./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6: WARNING: Unsigned expression compared with zero: r < 0 Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com
2021-03-17i915/perf: Start hrtimer only if sampling the OA bufferUmesh Nerlige Ramappa
SAMPLE_OA parameter enables sampling of OA buffer and results in a call to init the OA buffer which initializes the OA unit head/tail pointers. The OA_EXPONENT parameter controls the periodicity of the OA reports in the OA buffer and results in starting a hrtimer. Before gen12, all use cases required the use of the OA buffer and i915 enforced this setting when vetting out the parameters passed. In these platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked fine since it was implied that SAMPLE_OA is always passed. With gen12, this changed. Users can use perf without enabling the OA buffer as in OAR use cases. While an OAR use case should ideally not start the hrtimer, we see that passing an OA_EXPONENT parameter will start the hrtimer even though SAMPLE_OA is not specified. This results in an uninitialized OA buffer, so the head/tail pointers used to track the buffer are zero. This itself does not fail, but if we ran a use-case that SAMPLED the OA buffer previously, then the OA_TAIL register is still pointing to an old value. When the timer callback runs, it ends up calculating a wrong/large number of available reports. Since we do a spinlock_irq_save and start processing a large number of reports, NMI watchdog fires and causes a crash. Start the timer only if SAMPLE_OA is specified. v2: - Drop SAMPLE OA check when appending samples (Ashutosh) - Prevent read if OA buffer is not being sampled Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit be0bdd67fda9468156c733976688f6487d0c42f7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-03-17drm/i915: Workaround async flip + VT-d corruption on HSW/BDWVille Syrjälä
On HSW/BDW with VT-d active the first tile row scanned out after the first async flip of the frame often ends up corrupted. Whether the corruption happens or not depends on the scanline on which the async flip happens, but the behaviour seems very consistent. Ie. the same set of scanlines (which are most scanlines) always show the corruption. And another set of scanlines (far less of them) never shows the corruption. I discovered that disabling the fetch-stride stretching feature cures the corruption. This is some kind of TLB related prefetch thing AFAIK. We already disable it on SNB primary planes due to a documented workaround. The hardware folks indicated that disabling this should be fine, so let's go with that. And while we're here, let's document the relevant bits on all pre-skl platforms. Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com> (cherry picked from commit b7a7053ab2ec558b8ae4e55f62ea8f1f58e14f5c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-03-17locking/ww_mutex: Fix acquire/release imbalance in ↵Waiman Long
ww_acquire_init()/ww_acquire_fini() In ww_acquire_init(), mutex_acquire() is gated by CONFIG_DEBUG_LOCK_ALLOC. The dep_map in the ww_acquire_ctx structure is also gated by the same config. However mutex_release() in ww_acquire_fini() is gated by CONFIG_DEBUG_MUTEXES. It is possible to set CONFIG_DEBUG_MUTEXES without setting CONFIG_DEBUG_LOCK_ALLOC though it is an unlikely configuration. That may cause a compilation error as dep_map isn't defined in this case. Fix this potential problem by enclosing mutex_release() inside CONFIG_DEBUG_LOCK_ALLOC. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210316153119.13802-3-longman@redhat.com
2021-03-17locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handlingWaiman Long
The use_ww_ctx flag is passed to mutex_optimistic_spin(), but the function doesn't use it. The frequent use of the (use_ww_ctx && ww_ctx) combination is repetitive. In fact, ww_ctx should not be used at all if !use_ww_ctx. Simplify ww_mutex code by dropping use_ww_ctx from mutex_optimistic_spin() an clear ww_ctx if !use_ww_ctx. In this way, we can replace (use_ww_ctx && ww_ctx) by just (ww_ctx). Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20210316153119.13802-2-longman@redhat.com
2021-03-17thermal/core: Add NULL pointer check before using cooling device statsManaf Meethalavalappu Pallikunhi
There is a possible chance that some cooling device stats buffer allocation fails due to very high cooling device max state value. Later cooling device update sysfs can try to access stats data for the same cooling device. It will lead to NULL pointer dereference issue. Add a NULL pointer check before accessing thermal cooling device stats data. It fixes the following bug [ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 27.122960] Call trace: [ 27.122963] do_raw_spin_lock+0x18/0xe8 [ 27.122966] _raw_spin_lock+0x24/0x30 [ 27.128157] thermal_cooling_device_stats_update+0x24/0x98 [ 27.128162] cur_state_store+0x88/0xb8 [ 27.128166] dev_attr_store+0x40/0x58 [ 27.128169] sysfs_kf_write+0x50/0x68 [ 27.133358] kernfs_fop_write+0x12c/0x1c8 [ 27.133362] __vfs_write+0x54/0x160 [ 27.152297] vfs_write+0xcc/0x188 [ 27.157132] ksys_write+0x78/0x108 [ 27.162050] ksys_write+0xf8/0x108 [ 27.166968] __arm_smccc_hvc+0x158/0x4b0 [ 27.166973] __arm_smccc_hvc+0x9c/0x4b0 [ 27.186005] el0_svc+0x8/0xc Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeaurora.org
2021-03-17efivars: respect EFI_UNSUPPORTED return from firmwareShawn Guo
As per UEFI spec 2.8B section 8.2, EFI_UNSUPPORTED may be returned by EFI variable runtime services if no variable storage is supported by firmware. In this case, there is no point for kernel to continue efivars initialization. That said, efivar_init() should fail by returning an error code, so that efivarfs will not be mounted on /sys/firmware/efi/efivars at all. Otherwise, user space like efibootmgr will be confused by the EFIVARFS_MAGIC seen there, while EFI variable calls cannot be made successfully. Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-03-17KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUsVitaly Kuznetsov
When KVM_REQ_MASTERCLOCK_UPDATE request is issued (e.g. after migration) we need to make sure no vCPU sees stale values in PV clock structures and thus all vCPUs are kicked with KVM_REQ_CLOCK_UPDATE. Hyper-V TSC page clocksource is global and kvm_guest_time_update() only updates in on vCPU0 but this is not entirely correct: nothing blocks some other vCPU from entering the guest before we finish the update on CPU0 and it can read stale values from the page. Invalidate TSC page in kvm_gen_update_masterclock() to switch all vCPUs to using MSR based clocksource (HV_X64_MSR_TIME_REF_COUNT). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-17KVM: x86: hyper-v: Limit guest to writing zero to ↵Vitaly Kuznetsov
HV_X64_MSR_TSC_EMULATION_STATUS HV_X64_MSR_TSC_EMULATION_STATUS indicates whether TSC accesses are emulated after migration (to accommodate for a different host TSC frequency when TSC scaling is not supported; we don't implement this in KVM). Guest can use the same MSR to stop TSC access emulation by writing zero. Writing anything else is forbidden. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16riscv: Correct SPARSEMEM configurationKefeng Wang
There are two issues for RV32, 1) if use FLATMEM, it is useless to enable SPARSEMEM_STATIC. 2) if use SPARSMEM, both SPARSEMEM_VMEMMAP and SPARSEMEM_STATIC is enabled. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16RISC-V: kasan: Declare kasan_shallow_populate() staticPalmer Dabbelt
Without this I get a missing prototype warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16riscv: Ensure page table writes are flushed when initializing KASAN vmallocAlexandre Ghiti
Make sure that writes to kernel page table during KASAN vmalloc initialization are made visible by adding a sfence.vma. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16RISC-V: Fix out-of-bounds accesses in init_resources()Geert Uytterhoeven
init_resources() allocates an array of resources, based on the current total number of memory regions and reserved memory regions. However, allocating this array using memblock_alloc() might increase the number of reserved memory regions. If that happens, populating the array later based on the new number of regions will cause out-of-bounds writes beyond the end of the allocated array. Fix this by allocating one more entry, which may or may not be used. Fixes: 797f0375dd2ef5cd ("RISC-V: Do not allocate memblock while iterating reserved memblocks") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16riscv: Fix compilation error with Canaan SoCDamien Le Moal
When CONFIG_SOC_CANAAN is selected, the K210 sysctl driver is always compiled. Since this driver early init function calls the function k210_clk_early_init() implemented by the K210 clk driver, this driver must also always be selected for compilation ot avoid build failures. Avoid such build failures by always selecting CONFIG_COMMON_CLK and CONFIG_COMMON_CLK_K210 when CONFIG_SOC_CANAAN is enabled. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Fixes: c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16ftrace: Fix spelling mistake "disabed" -> "disabled"Colin Ian King
There is a spelling mistake in a comment, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16riscv: fix bugon.cocci warningskernel test robot
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") CC: Guo Ren <guoren@linux.alibaba.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-16scsi: mpt3sas: Do not use GFP_KERNEL in atomic contextChristophe JAILLET
mpt3sas_get_port_by_id() can be called when a spinlock is held. Use GFP_ATOMIC instead of GFP_KERNEL when allocating memory. Issue spotted by call_kern.cocci: ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL Link: https://lore.kernel.org/r/20210220093951.905362-1-christophe.jaillet@wanadoo.fr Fixes: 324c122fc0a4 ("scsi: mpt3sas: Add module parameter multipath_on_hba") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-17PCI: rpadlpar: Fix potential drc_name corruption in store functionsTyrel Datwyler
Both add_slot_store() and remove_slot_store() try to fix up the drc_name copied from the store buffer by placing a NUL terminator at nbyte + 1 or in place of a '\n' if present. However, the static buffer that we copy the drc_name data into is not zeroed and can contain anything past the n-th byte. This is problematic if a '\n' byte appears in that buffer after nbytes and the string copied into the store buffer was not NUL terminated to start with as the strchr() search for a '\n' byte will mark this incorrectly as the end of the drc_name string resulting in a drc_name string that contains garbage data after the n-th byte. Additionally it will cause us to overwrite that '\n' byte on the stack with NUL, potentially corrupting data on the stack. The following debugging shows an example of the drmgr utility writing "PHB 4543" to the add_slot sysfs attribute, but add_slot_store() logging a corrupted string value. drmgr: drmgr: -c phb -a -s PHB 4543 -d 1 add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19 Fix this by using strscpy() instead of memcpy() to ensure the string is NUL terminated when copied into the static drc_name buffer. Further, since the string is now NUL terminated the code only needs to change '\n' to '\0' when present. Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> [mpe: Reformat change log and add mention of possible stack corruption] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
2021-03-16scsi: ufs: ufs-mediatek: Correct operator & -> &&dongjian
The "lpm" and "->enabled" are all boolean. We should be using && rather than the bit operator. Link: https://lore.kernel.org/r/1615896915-148864-1-git-send-email-dj0227@163.com Fixes: 488edafb1120 ("scsi: ufs-mediatek: Introduce low-power mode for device power supply") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: dongjian <dongjian@yulong.com> Signed-off-by: Yue Hu <huyue2@yulong.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: sd_zbc: Update write pointer offset cacheJohannes Thumshirn
Recent changes changed the completion of SCSI commands from Soft-IRQ context to IRQ context. This triggers the following warning, when we're completing writes to zoned block devices that go through the zone append emulation: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc2+ #2 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 RIP: 0010:__local_bh_disable_ip+0x3f/0x50 RSP: 0018:ffff8883e1409ba8 EFLAGS: 00010006 RAX: 0000000080010001 RBX: 0000000000000001 RCX: 0000000000000013 RDX: ffff888129e4d200 RSI: 0000000000000201 RDI: ffffffff915b9dbd RBP: ffff888113e9a540 R08: ffff888113e9a540 R09: 00000000000077f0 R10: 0000000000080000 R11: 0000000000000001 R12: ffff888129e4d200 R13: 0000000000001000 R14: 00000000000077f0 R15: ffff888129e4d218 FS: 0000000000000000(0000) GS:ffff8883e1400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f8418ebc0 CR3: 000000021202a006 CR4: 00000000001706f0 Call Trace: <IRQ> _raw_spin_lock_bh+0x18/0x40 sd_zbc_complete+0x43d/0x1150 sd_done+0x631/0x1040 ? mark_lock+0xe4/0x2fd0 ? provisioning_mode_store+0x3f0/0x3f0 scsi_finish_command+0x31b/0x5c0 _scsih_io_done+0x960/0x29e0 [mpt3sas] ? mpt3sas_scsih_scsi_lookup_get+0x1c7/0x340 [mpt3sas] ? __lock_acquire+0x166b/0x58b0 ? _get_st_from_smid+0x4a/0x80 [mpt3sas] _base_process_reply_queue+0x23f/0x26e0 [mpt3sas] ? lock_is_held_type+0x98/0x110 ? find_held_lock+0x2c/0x110 ? mpt3sas_base_sync_reply_irqs+0x360/0x360 [mpt3sas] _base_interrupt+0x8d/0xd0 [mpt3sas] ? rcu_read_lock_sched_held+0x3f/0x70 __handle_irq_event_percpu+0x24d/0x600 handle_irq_event+0xef/0x240 ? handle_irq_event_percpu+0x110/0x110 handle_edge_irq+0x1f6/0xb60 __common_interrupt+0x75/0x160 common_interrupt+0x7b/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 Don't use spin_lock_bh() to protect the update of the write pointer offset cache, but use spin_lock_irqsave() for it. Link: https://lore.kernel.org/r/3cfebe48d09db73041b7849be71ffbcec7ee40b3.1615369586.git.johannes.thumshirn@wdc.com Fixes: 664f0dce2058 ("scsi: mpt3sas: Add support for shared host tagset for CPU hotplug") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-17zonefs: fix to update .i_wr_refcnt correctly in zonefs_open_zone()Chao Yu
In zonefs_open_zone(), if opened zone count is larger than .s_max_open_zones threshold, we missed to recover .i_wr_refcnt, fix this. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <stable@vger.kernel.org> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2021-03-16MIPS: vmlinux.lds.S: Fix appended dtb not properly alignedPaul Cercueil
Commit 6654111c893f ("MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes") changed the alignment from STRUCT_ALIGNMENT bytes to 8 bytes. The commit's message makes it sound like it was actually done on purpose, but this is not the case. The commit was written when raw appended dtb were not aligned at all. The STRUCT_ALIGN() was added a few days before, in commit 7a05293af39f ("MIPS: boot/compressed: Copy DTB to aligned address"). The true purpose of the commit was not to align specifically to 8 bytes, but to make sure that the generated vmlinux' size was properly padded to the alignment required for DTBs. While the switch to 8-byte alignment worked for vmlinux-appended dtb blobs, it broke vmlinuz-appended dtb blobs, as the decompress routine moves the blob to a STRUCT_ALIGNMENT aligned address. Fix this by changing the raw appended dtb blob alignment from 8 bytes back to STRUCT_ALIGNMENT bytes in vmlinux.lds.S. Fixes: 6654111c893f ("MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes") Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 09:38:54 +0000