summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-24drm/amdgpu: Use heavy weight for tlb invalidation on xgmi configurationshaoyunl
There is a bug found in vml2 xgmi logic: mtype is always sent as NC on the VMC to TC interface for a page walk, regardless of whether the request is being sent to local or remote GPU. NC means non-coherent and will cause the VMC return data to be cached in the TCC (versus UC – uncached will not cache the data). Since the page table updates are being done by SDMA/HDP, then TCC will never be updated and the GC VML2 will continue to hit on the TCC and never get the updated page tables and result in a fault. Heave weigh tlb invalidation does a WB/INVAL of the L1/L2 GL data caches so TCC will not be hit on next request Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Preserve ttmp[4:5] instead of ttmp[14:15]Jay Cornwall
ttmp[4:5] is initialized by the SPI with SPI_GDBG_TRAP_DATA* values. These values are more useful to the debugger than ttmp[14:15], which carries dispatch_scratch_base*. There are too few registers to preserve both. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix gfx9 XNACK state save/restoreJay Cornwall
SQ_WAVE_IB_STS.RCNT grew from 4 bits to 5 in gfx9. Do not truncate when saving in the high bits of TTMP1. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Preserve wave state after instruction fetch MEM_VIOLJay Cornwall
If instruction fetch fails the wave cannot be halted and returned to the shader without raising MEM_VIOL again. Currently the wave is terminated if this occurs, but this loses information about the cause of the fault. The debugger would prefer the faulting wave state to be context-saved. Poll inside the trap handler until TRAPSTS.SAVECTX indicates context save is ready. Exit the poll loop and complete the remainder of the exception handler, then return to the shader. The next instruction fetch will be from the trap handler and not the faulting PC. Context save will then deschedule the wave and save its state. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix gfx8 MEM_VIOL exception handlerJay Cornwall
When MEM_VIOL is asserted the context save handler rewinds the program counter. This is incorrect for any source of the exception. MEM_VIOL may be raised in normal operation by out-of-bounds access to LDS or GDS and does not require special handling. Remove PC adjustment when MEM_VIOL has been raised. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix compute profile switchingHarish Kasiviswanathan
Fix compute profile switching on process termination. Add a dedicated reference counter to keep track of entry/exit to/from compute profile. This enables switching compute profiles for other reasons than process creation or termination. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Shift sdma_engine_id and sdma_queue_id in mqdOak Zeng
FW of some new ASICs requires sdma mqd size to be not more than 128 dwords. Repurpose the last 2 reserved fields of sdma mqd for driver internal use, so the total mqd size is no bigger than 128 dwords Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Differentiate b/t sdma_id and sdma_queue_idOak Zeng
sdma_queue_id is sdma queue index inside one sdma engine. sdma_id is sdma queue index among all sdma engines. Use those two names properly. Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Add sdma allocation debug messageOak Zeng
Add debug messages during SDMA queue allocation. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Use 64 bit sdma_bitmapOak Zeng
Maximumly support 64 sdma queues Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: enable ppfeaturemask module parameter support on Vega20Evan Quan
Support DPM/DS/ULV related bitmasks of ppfeaturemask module parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: use pcie_bandwidth_available rather than open coding itAlex Deucher
It does the same thing we were doing already. I though it needed work for gen3/4 speeds, but that seems to be covered already. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24gpu: fix typos in code commentsWeitao Hou
fix eror to error Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: fix sw SMU wrong UVD/VCE powergate settingEvan Quan
The UVD/VCE bits are set wrongly. This causes the UVD/VCE clocks are not brought back correctly on needed. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: use div64_ul for 32-bit compatibility v1Slava Abramov
v1: replace casting to unsigned long with div64_ul Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: Enable "disable dpm" feature to support swSMU debug (v2)Chengming Gui
add pm_enabled to control the dpm off/on. v2: Directly return 0 to replace return ret and merge some check code. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Hawking Zhang <hawking.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: Fix maybe-uninitialized in get_ppfeature_statusBhawanpreet Lakha
This fixes the warning below error: ‘feature_mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] *features_enabled = ((((uint64_t)feature_mask[0] << SMU_FEATURES_LOW_SHIFT) & SMU_FEATURES_LOW_MASK) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ (((uint64_t)feature_mask[1] << SMU_FEATURES_HIGH_SHIFT) & SMU_FEATURES_HIGH_MASK)); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: fix spelling mistake "retrived" -> "retrieved"Colin Ian King
There is a spelling mistake in a DRM_ERROR error message. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/vega20: use mode1 reset for RAS and XGMIAlex Deucher
If RAS or XGMI are enabled, you have to use mode1 reset rather than BACO. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: 3.2.31Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Disable ABM before destroy ABM structPaul Hsieh
[Why] When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled. [How] Send ABM disable command before destroy ABM construct Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: dont set otg offsetJun Lei
move the update of otg instance outside of hw programming logic, since this is sw state, it should always be updated and should never be optimized away. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Explicitly specify update type per plane info changeNicholas Kazlauskas
[Why] The bit for flip addr is being set causing the determination for FAST vs MEDIUM to always return MEDIUM when plane info is provided as a surface update. This causes extreme stuttering for the typical atomic update path on Linux. [How] Don't use update_flags->raw for determining FAST vs MEDIUM. It's too fragile to changes like this. Explicitly specify the update type per update flag instead. It's not as clever as checking the bits itself but at least it's correct. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eryk Brol <Eryk.Brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Rename EDID_BLOCK_SIZE to DC_EDID_BLOCK_SIZEJoshua Aberback
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Use VCP for extended colorimetryAric Cyr
DPRX should send the VCP extended colorimetry packet if the sink supports DPCD rev1.4 and reports the extended colorimetry bit. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Use DCN functions instead of DCEWesley Chalmers
[WHY] DCN code should make as few references to DCE as possible [HOW] Copy DCE110 implementation of find_first_free_match_stream_enc_for_link into DCN10 Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Engine-specific encoder allocationWesley Chalmers
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: enabling stream after HPD low to high happenedCharlene Liu
[Why] 1. No real HPD plug in/out but HPD happens, the driver notifies OS connection changed. 2. No display in target. When HPD goes low to high, the driver should regard as HPD and enter setmode flow. [How] In this case, even stream didn't change but still retrain. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Program VTG params after programming Global SyncJoshua Aberback
[Why] VTG has a parameter FP2, which is defined as: if VSTARTUP is before VSYNC: FP2 = number of lines in between VSTARTUP and VSYNC else FP2 = 0 Currently, FP2 is only programmed during "program_timing". However, the position of VSTARTUP is affected by the prefetching requirements on all pipes, so the position might change when we do memory request control on another pipe, so we need to make sure that FP2 stays up-to-date whenever we adjust VSTARTUP. [How] - refactor VTG_CONTROL programming into a new function "set_vtg_params" - call it after calling "program_global_sync" - make sure it's called after because it relies on the cached dlg params Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: add null checks and set update flagsDmytro Laktyushkin
* add plane state null checks * add and set update surface flags Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: 3.2.30Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Reuse MPC OGRAM for 1D blenderVitaly Prosyak
[Why & How] Reuse existent code path and in order to do that apply de gamma in 1D blender LUT and re use MPC OGAM. Follow up is required. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Remove DPMS state dependency for fast bootSivapiriyanKumarasamy
[Why] The DPMS state of a display should not impact whether we want to enable fast boot. Currently fast boot is not enabled when resuming from S4 because of this. [How] Remove check for DPMS state when determining if fast boot can be applied. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Hook up CRC capture support for dce120Nicholas Kazlauskas
[Why] Many IGT tests require CRC capture in order to confirm that the output is visually correct. These skip on dce120 because configure_crc and get_crc aren't set. [How] Hook up is_tg_enabled, configure_crc and get_crc functions on dce120's timing generator. The logic should be the same as DCE and DCN with some minor register naming differences. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: define v_total_min and max parametersCharlene Liu
add these parameters for future use Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: support sw smu hotspot and memory temperature retrievalEvan Quan
Support hotspot and memory temperature retrieval on sw smu routine. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: support uclk activity retrieve on sw smu routineEvan Quan
Support realtime uclk activity report. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: honor hw limit on fetching metrics dataEvan Quan
Request too frequently may get corrupt data. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: support ppfeatures sysfs interface on sw smu routineEvan Quan
Support ppfeatures sysfs interface on Vega20 sw smu routine. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: drop redundant smu callEvan Quan
smu_get_clk_info_from_vbios() was called repeatedly. It seems a merge error. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: drop unnecessary sw smu checkEvan Quan
There is already sw smu check on IP block adding. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Drop DCN1_01 guardsHarry Wentland
[WHY] These were only needed for bringup. They're not needed anymore. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Don't load DMCU for Raven 1 (v2)Harry Wentland
[WHY] Some early Raven boards had a bad SBIOS that doesn't play nicely with the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU load but that doesn't seem to be the case. We've still seen reports of users unable to boot their systems at all. [HOW] Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso. v2: Fix ifdef (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Add ASICREV_IS_PICASSOHarry Wentland
[WHY] We only want to load DMCU FW on Picasso and Raven 2, not on Raven 1. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-24drm/amdgpu: Report firmware versions with sysfs v2Ori Messinger
Firmware versions can be found as separate sysfs files at: /sys/class/drm/cardX/device/fw_version (where X is the card number) The firmware versions are displayed in hexadecimal. v2: Moved sysfs files to subfolder Signed-off-by: Ori Messinger <ori.messinger@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: make VCN DPG pause mode detached from general VCNLeo Liu
It should be attached to VCN 1.0 Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: move the VCN DPG mode read and write to VCNLeo Liu
Since this is VCN specific and only used by VCN Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/sriov: Need to initialize the HDP_NONSURFACE_BAStETiecheng Zhou
it requires to initialize HDP_NONSURFACE_BASE, so as to avoid using the value left by a previous VM under sriov scenario. v2: it should not hurt baremetal, generalize it for both sriov and baremetal Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: suppress repeating tmo reportMonk Liu
only report once per TMO job and the timer would be restarted upon the job finished if it's just slow. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: remove static GDS, GWS and OA allocationChristian König
As far as we know this was never used by userspace and so should be removed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 08:07:09 +0000