summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-18perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo
In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-18iommu/vt-d: Remove incorrect PSI capability checkLu Baolu
The PSI (Page Selective Invalidation) bit in the capability register is only valid for second-level translation. Intel IOMMU supporting scalable mode must support page/address selective IOTLB invalidation for first-level translation. Remove the PSI capability check in SVA cache invalidation code. Fixes: 8744daf4b0699 ("iommu/vt-d: Remove global page flush support") Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18staging: wfx: fix wrong error messageJérôme Pouiller
The driver checks that the number of retries made by the device is coherent with the rate policy. However, this check make sense only if the device has returned RETRY_EXCEEDED. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-11-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix hif_set_mfp() with big endian hostsJérôme Pouiller
struct hif_mib_protected_mgmt_policy is an array of u8. There is no reason to swap its bytes. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-10-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: detect race condition in WEP authenticationJérôme Pouiller
Current code has a special case to handle association with WEP. Before to rework the tx data handling, let's try to detect any possible misuse of this code. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-9-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1MbpsJérôme Pouiller
When not using HT mode, minstrel always includes 1Mbps as fallback rate. But, when using HT mode, this fallback is not included. Yet, it seems that it could save some frames. So, this patch add it unconditionally. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-8-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix rate control handlingJérôme Pouiller
A tx_retry_policy (the equivalent of a list of ieee80211_tx_rate in hardware API) is not able to include a rate multiple time. So currently, the driver merges the identical rates from the policy provided by minstrel (and it try to do the best choice it can in the associated flags) before to sent it to firmware. Until now, when rates are merged, field "count" is set to max(count1, count2). But, it means that the sum of retries for all rates could be far less than initial number of retries. So, this patch changes the value of field "count" to count1 + count2. Thus, sum of all retries for all rates stay the same. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-7-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: firmware does not support more than 32 total retriesJérôme Pouiller
The sum of all retries for a Tx frame cannot be superior to 32. There are 4 rates at most. So this patch limits number of retries per rate to 8. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: use boolean appropriatelyJérôme Pouiller
The field 'uploaded' is used as a boolean, so call it a boolean. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix counter overflowJérôme Pouiller
Some weird behaviors were observed when connection is really good and packets are small. It appears that sometime, number of packets in queues can exceed 255 and generate an overflow in field usage_count. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix case of lack of tx_retry_policiesJérôme Pouiller
In some rare cases, driver may not have any available tx_retry_policies. In this case, the driver asks to mac80211 to stop sending data. However, it seems that a race is possible and a few frames can be sent to the driver. In this case, driver can't wait for free tx_retry_policies since wfx_tx() must be atomic. So, this patch fix this case by sending these frames with the special policy number 15. The firmware normally use policy 15 to send internal frames (PS-poll, beacons, etc...). So, it is not a so bad fallback. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix the cache of rate policies on interface resetJérôme Pouiller
Device and driver maintain a cache of rate policies (aka. tx_retry_policy in hardware API). When hif_reset() is sent to hardware, device resets its cache of rate policies. In order to keep driver in sync, it is necessary to do the same on driver. Note, when driver tries to use a rate policy that has not been defined on device, data is sent at 1Mbps. So, this patch should fix abnormal throughput observed sometime after a reset of the interface. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18kconfig: remove ---help--- from documentationMasahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), scripts/checkpatch.pl warns the use of ---help---. Kconfig still supports ---help---, but new code should avoid using it. Let's stop advertising it in documentation. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-18mmc: sdhci: Add a quirk for broken command queuingAdrian Hunter
Command queuing has been reported broken on some systems based on Intel GLK. A separate patch disables command queuing in some cases. This patch adds a quirk for broken command queuing, which enables users with problems to disable command queuing using sdhci module parameters for quirks. Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: sdhci: Workaround broken command queuing on Intel GLKAdrian Hunter
Command queuing has been reported broken on some Lenovo systems based on Intel GLK. This is likely a BIOS issue, so disable command queuing for Intel GLK if the BIOS vendor string is "LENOVO". Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: sdhci-of-esdhc: fix P2020 errata handlingYangbo Lu
Two previous patches introduced below quirks for P2020 platforms. - SDHCI_QUIRK_RESET_AFTER_REQUEST - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL The patches made a mistake to add them in quirks2 of sdhci_host structure, while they were defined for quirks. host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; This patch is to fix them. host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support") Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18Merge tag 'gvt-fixes-2019-12-18' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen
drm-intel-fixes gvt-fixes-2019-12-18 - vGPU state setting locking fix (Zhenyu) - Fix vGPU display dmabuf as read-only (Zhenyu) - Properly handle vGPU display dmabuf page pin when rendering (Tina) - Fix one guest boot warning to handle guc reset state (Fred) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218051657.GA21662@zhen-hp.sh.intel.com
2019-12-18drm/i915: Fix pid leak with banned clientsTvrtko Ursulin
Get_pid_task() needs to be paired with a put_pid or we leak a pid reference every time a banned client tries to create a context. v2: * task_pid_nr helper exists! (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: b083a0870c79 ("drm/i915: Add per client max context ban limit") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191217170933.8108-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit ba16a48af797db124ac100417f9229b1650ce1fb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-18drm/i915/gem: Keep request alive while attaching fencesChris Wilson
Since commit e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex"), the request retirement can happen outside of the struct_mutex serialised only by the timeline->mutex. We drop the timeline->mutex on submitting the request (i915_request_add) so after that point, it is liable to be freed. Make sure our local reference is kept alive until we have finished attaching it to the signalers. (Note that this erodes the argument that i915_request_add should consume the reference, but that is a slightly larger patch!) Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217134729.3297818-1-chris@chris-wilson.co.uk (cherry picked from commit e14177f19739d74839eb496a27f5f5d958beaa5b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-17net-sysfs: Call dev_hold always in rx_queue_add_kobjectJouni Hogander
Dev_hold has to be called always in rx_queue_add_kobject. Otherwise usage count drops below 0 in case of failure in kobject_init_and_add. Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") Reported-by: syzbot <syzbot+30209ea299c09d8785c9@syzkaller.appspotmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Miller <davem@davemloft.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17nfp: flower: fix stats id allocationJohn Hurley
As flower rules are added, they are given a stats ID based on the number of rules that can be supported in firmware. Only after the initial allocation of all available IDs does the driver begin to reuse those that have been released. The initial allocation of IDs was modified to account for multiple memory units on the offloaded device. However, this introduced a bug whereby the counter that controls the IDs could be decremented before the ID was assigned (where it is further decremented). This means that the stats ID could be assigned as -1/0xfffffff which is out of range. Fix this by only decrementing the main counter after the current ID has been assigned. Fixes: 467322e2627f ("nfp: flower: support multiple memory units for filter offloads") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: dsa: make unexported dsa_link_touch() staticBen Dooks (Codethink)
dsa_link_touch() is not exported, or defined outside of the file it is in so make it static to avoid the following warning: net/dsa/dsa2.c:127:17: warning: symbol 'dsa_link_touch' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: ag71xx: fix compile warningsOleksij Rempel
drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_probe': drivers/net/ethernet/atheros/ag71xx.c:1776:30: warning: passing argument 2 of 'of_get_phy_mode' makes pointer from integer without a cast [-Wint-conversion] In file included from drivers/net/ethernet/atheros/ag71xx.c:33: ./include/linux/of_net.h:15:69: note: expected 'phy_interface_t *' {aka 'enum <anonymous> *'} but argument is of type 'int' Fixes: 0c65b2b90d13c1 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: fix kernel-doc warning in <linux/netdevice.h>Randy Dunlap
Fix missing '*' kernel-doc notation that causes this warning: ../include/linux/netdevice.h:1779: warning: bad line: spinlock Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: annotate lockless accesses to sk->sk_pacing_shiftEric Dumazet
sk->sk_pacing_shift can be read and written without lock synchronization. This patch adds annotations to document this fact and avoid future syzbot complains. This might also avoid unexpected false sharing in sk_pacing_shift_update(), as the compiler could remove the conditional check and always write over sk->sk_pacing_shift : if (sk->sk_pacing_shift != val) sk->sk_pacing_shift = val; Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: qlogic: Fix error paths in ql_alloc_large_buffers()Ben Hutchings
ql_alloc_large_buffers() has the usual RX buffer allocation loop where it allocates skbs and maps them for DMA. It also treats failure as a fatal error. There are (at least) three bugs in the error paths: 1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the first buffer that couldn't be allocated will have .skb == NULL. But the qla_buf[] array is not zero-initialised. 2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is incorrect for the last allocated skb, if DMA mapping failed. 3. Commit 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any() after the skb is recorded in lrg_buf[], so ql_free_large_buffers() will double-free it. The bugs are somewhat inter-twined, so fix them all at once: * Clear each entry in qla_buf[] before attempting to allocate an skb for it. This goes half-way to fixing bug 1. * Set the .skb field only after the skb is DMA-mapped. This fixes the rest. Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue ...") Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() ...") Fixes: 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17sctp: fix memleak on err handling of stream initializationMarcelo Ricardo Leitner
syzbot reported a memory leak when an allocation fails within genradix_prealloc() for output streams. That's because genradix_prealloc() leaves initialized members initialized when the issue happens and SCTP stack will abort the current initialization but without cleaning up such members. The fix here is to always call genradix_free() when genradix_prealloc() fails, for output and also input streams, as it suffers from the same issue. Reported-by: syzbot+772d9e36c490b18d51d1@syzkaller.appspotmail.com Fixes: 2075e50caf5e ("sctp: convert to genradix") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18fs: call fsnotify_sb_delete after evict_inodesEric Sandeen
When a filesystem is unmounted, we currently call fsnotify_sb_delete() before evict_inodes(), which means that fsnotify_unmount_inodes() must iterate over all inodes on the superblock looking for any inodes with watches. This is inefficient and can lead to livelocks as it iterates over many unwatched inodes. At this point, SB_ACTIVE is gone and dropping refcount to zero kicks the inode out out immediately, so anything processed by fsnotify_sb_delete / fsnotify_unmount_inodes gets evicted in that loop. After that, the call to evict_inodes will evict everything else with a zero refcount. This should speed things up overall, and avoid livelocks in fsnotify_unmount_inodes(). Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-18fs: avoid softlockups in s_inodes iteratorsEric Sandeen
Anything that walks all inodes on sb->s_inodes list without rescheduling risks softlockups. Previous efforts were made in 2 functions, see: c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb() ac05fbb inode: don't softlockup when evicting inodes but there hasn't been an audit of all walkers, so do that now. This also consistently moves the cond_resched() calls to the bottom of each loop in cases where it already exists. One loop remains: remove_dquot_ref(), because I'm not quite sure how to deal with that one w/o taking the i_lock. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-17lib/Kconfig.debug: fix some messed up configurationsChangbin Du
Some configuration items are messed up during conflict resolving. For example, STRICT_DEVMEM should not in testing menu, but kunit should. This patch fixes all of them. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20191209155653.7509-1-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-17mm: vmscan: protect shrinker idr replace with CONFIG_MEMCGYang Shi
Since commit 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on memcg kmem"), shrinkers' idr is protected by CONFIG_MEMCG instead of CONFIG_MEMCG_KMEM, so it makes no sense to protect shrinker idr replace with CONFIG_MEMCG_KMEM. And in the CONFIG_MEMCG && CONFIG_SLOB case, shrinker_idr contains only shrinker, and it is deferred_split_shrinker. But it is never actually called, since idr_replace() is never compiled due to the wrong #ifdef. The deferred_split_shrinker all the time is staying in half-registered state, and it's never called for subordinate mem cgroups. Link: http://lkml.kernel.org/r/1575486978-45249-1-git-send-email-yang.shi@linux.alibaba.com Fixes: 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on memcg kmem") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> [5.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-17kasan: don't assume percpu shadow allocations will succeedDaniel Axtens
syzkaller and the fault injector showed that I was wrong to assume that we could ignore percpu shadow allocation failures. Handle failures properly. Merge all the allocated areas back into the free list and release the shadow, then clean up and return NULL. The shadow is released unconditionally, which relies upon the fact that the release function is able to tolerate pages not being present. Also clean up shadows in the recovery path - currently they are not released, which leaks a bit of memory. Link: http://lkml.kernel.org/r/20191205140407.1874-3-dja@axtens.net Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory") Signed-off-by: Daniel Axtens <dja@axtens.net> Reported-by: syzbot+82e323920b78d54aaed5@syzkaller.appspotmail.com Reported-by: syzbot+59b7daa4315e07a994f1@syzkaller.appspotmail.com Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-17kasan: use apply_to_existing_page_range() for releasing vmalloc shadowDaniel Axtens
kasan_release_vmalloc uses apply_to_page_range to release vmalloc shadow. Unfortunately, apply_to_page_range can allocate memory to fill in page table entries, which is not what we want. Also, kasan_release_vmalloc is called under free_vmap_area_lock, so if apply_to_page_range does allocate memory, we get a sleep in atomic bug: BUG: sleeping function called from invalid context at mm/page_alloc.c:4681 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 15087, name: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x199/0x216 lib/dump_stack.c:118 ___might_sleep.cold.97+0x1f5/0x238 kernel/sched/core.c:6800 __might_sleep+0x95/0x190 kernel/sched/core.c:6753 prepare_alloc_pages mm/page_alloc.c:4681 [inline] __alloc_pages_nodemask+0x3cd/0x890 mm/page_alloc.c:4730 alloc_pages_current+0x10c/0x210 mm/mempolicy.c:2211 alloc_pages include/linux/gfp.h:532 [inline] __get_free_pages+0xc/0x40 mm/page_alloc.c:4786 __pte_alloc_one_kernel include/asm-generic/pgalloc.h:21 [inline] pte_alloc_one_kernel include/asm-generic/pgalloc.h:33 [inline] __pte_alloc_kernel+0x1d/0x200 mm/memory.c:459 apply_to_pte_range mm/memory.c:2031 [inline] apply_to_pmd_range mm/memory.c:2068 [inline] apply_to_pud_range mm/memory.c:2088 [inline] apply_to_p4d_range mm/memory.c:2108 [inline] apply_to_page_range+0x77d/0xa00 mm/memory.c:2133 kasan_release_vmalloc+0xa7/0xc0 mm/kasan/common.c:970 __purge_vmap_area_lazy+0xcbb/0x1f30 mm/vmalloc.c:1313 try_purge_vmap_area_lazy mm/vmalloc.c:1332 [inline] free_vmap_area_noflush+0x2ca/0x390 mm/vmalloc.c:1368 free_unmap_vmap_area mm/vmalloc.c:1381 [inline] remove_vm_area+0x1cc/0x230 mm/vmalloc.c:2209 vm_remove_mappings mm/vmalloc.c:2236 [inline] __vunmap+0x223/0xa20 mm/vmalloc.c:2299 __vfree+0x3f/0xd0 mm/vmalloc.c:2356 __vmalloc_area_node mm/vmalloc.c:2507 [inline] __vmalloc_node_range+0x5d5/0x810 mm/vmalloc.c:2547 __vmalloc_node mm/vmalloc.c:2607 [inline] __vmalloc_node_flags mm/vmalloc.c:2621 [inline] vzalloc+0x6f/0x80 mm/vmalloc.c:2666 alloc_one_pg_vec_page net/packet/af_packet.c:4233 [inline] alloc_pg_vec net/packet/af_packet.c:4258 [inline] packet_set_ring+0xbc0/0x1b50 net/packet/af_packet.c:4342 packet_setsockopt+0xed7/0x2d90 net/packet/af_packet.c:3695 __sys_setsockopt+0x29b/0x4d0 net/socket.c:2117 __do_sys_setsockopt net/socket.c:2133 [inline] __se_sys_setsockopt net/socket.c:2130 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2130 do_syscall_64+0xfa/0x780 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Switch to using the apply_to_existing_page_range() helper instead, which won't allocate memory. [akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/] Link: http://lkml.kernel.org/r/20191205140407.1874-2-dja@axtens.net Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory") Signed-off-by: Daniel Axtens <dja@axtens.net> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-17mm/memory.c: add apply_to_existing_page_range() helperDaniel Axtens
apply_to_page_range() takes an address range, and if any parts of it are not covered by the existing page table hierarchy, it allocates memory to fill them in. In some use cases, this is not what we want - we want to be able to operate exclusively on PTEs that are already in the tables. Add apply_to_existing_page_range() for this. Adjust the walker functions for apply_to_page_range to take 'create', which switches them between the old and new modes. This will be used in KASAN vmalloc. [akpm@linux-foundation.org: reduce code duplication] [akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/] [akpm@linux-foundation.org: initialize __apply_to_page_range::err] Link: http://lkml.kernel.org/r/20191205140407.1874-1-dja@axtens.net Signed-off-by: Daniel Axtens <dja@axtens.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Qian Cai <cai@lca.pw> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-17kasan: fix crashes on access to memory mapped by vm_map_ram()Andrey Ryabinin
With CONFIG_KASAN_VMALLOC=y any use of memory obtained via vm_map_ram() will crash because there is no shadow backing that memory. Instead of sprinkling additional kasan_populate_vmalloc() calls all over the vmalloc code, move it into alloc_vmap_area(). This will fix vm_map_ram() and simplify the code a bit. [aryabinin@virtuozzo.com: v2] Link: http://lkml.kernel.org/r/20191205095942.1761-1-aryabinin@virtuozzo.comLink: http://lkml.kernel.org/r/20191204204534.32202-1-aryabinin@virtuozzo.com Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Alexander Potapenko <glider@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-18KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisorPaul Mackerras
Commit 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") added a call to uv_svm_terminate, which is an ultravisor call, without any check that the guest is a secure guest or even that the system has an ultravisor. On a system without an ultravisor, the ultracall will degenerate to a hypercall, but since we are not in KVM guest context, the hypercall will get treated as a system call, which could have random effects depending on what happens to be in r0, and could also corrupt the current task's kernel stack. Hence this adds a test for the guest being a secure guest before doing uv_svm_terminate(). Fixes: 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-12-17io_uring: warn about unhandled opcodeJens Axboe
Now that we have all the opcodes handled in terms of command prep and SQE reuse, add a printk_once() to warn about any potentially new and unhandled ones. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: read opcode and user_data from SQE exactly onceJens Axboe
If we defer a request, we can't be reading the opcode again. Ensure that the user_data and opcode fields are stable. For the user_data we already have a place for it, for the opcode we can fill a one byte hold and store that as well. For both of them, assign them when we originally read the SQE in io_get_sqring(). Any code that uses sqe->opcode or sqe->user_data is switched to req->opcode and req->user_data. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: make IORING_OP_TIMEOUT_REMOVE deferrableJens Axboe
If we defer this command as part of a link, we have to make sure that the SQE data has been read upfront. Integrate the timeout remove op into the prep handling to make it safe for SQE reuse. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: make IORING_OP_CANCEL_ASYNC deferrableJens Axboe
If we defer this command as part of a link, we have to make sure that the SQE data has been read upfront. Integrate the async cancel op into the prep handling to make it safe for SQE reuse. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: make IORING_POLL_ADD and IORING_POLL_REMOVE deferrableJens Axboe
If we defer these commands as part of a link, we have to make sure that the SQE data has been read upfront. Integrate the poll add/remove into the prep handling to make it safe for SQE reuse. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: make HARDLINK imply LINKPavel Begunkov
The rules are as follows, if IOSQE_IO_HARDLINK is specified, then it's a link and there is no need to set IOSQE_IO_LINK separately, though it could be there. Add proper check and ensure that IOSQE_IO_HARDLINK implies IOSQE_IO_LINK. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: any deferred command must have stable sqe dataJens Axboe
We're currently not retaining sqe data for accept, fsync, and sync_file_range. None of these commands need data outside of what is directly provided, hence it can't go stale when the request is deferred. However, it can get reused, if an application reuses SQE entries. Ensure that we retain the information we need and only read the sqe contents once, off the submission path. Most of this is just moving code into a prep and finish function. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: remove 'sqe' parameter to the OP helpers that take itJens Axboe
We pass in req->sqe for all of them, no need to pass it in as the request is always passed in. This is a necessary prep patch to be able to cleanup/fix the request prep path. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io_uring: fix pre-prepped issue with force_nonblock == trueJens Axboe
Some of these code paths assume that any force_nonblock == true issue is not prepped, but that's not true if we did prep as part of link setup earlier. Check if we already have an async context allocate before setting up a new one. Cleanup the async context setup in general, we have a lot of duplicated code there. Fixes: 03b1230ca12a ("io_uring: ensure async punted sendmsg/recvmsg requests copy data") Fixes: f67676d160c6 ("io_uring: ensure async punted read/write requests copy iovec") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17io-wq: re-add io_wq_current_is_worker()Jens Axboe
This reverts commit 8cdda87a4414, we now have several use csaes for this helper. Reinstate it. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17dt-bindings: Add missing 'properties' keyword enclosing 'snps,tso'Rob Herring
DT property definitions must be under a 'properties' keyword. This was missing for 'snps,tso' in an if/then clause. A meta-schema fix will catch future errors like this. Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas") Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-17Merge tag 'wireless-drivers-2019-12-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.5 First set of fixes for v5.5. Fixing security issues, some regressions and few major bugs. mwifiex * security fix for handling country Information Elements (CVE-2019-14895) * security fix for handling TDLS Information Elements ath9k * fix endian issue with ath9k_pci_owl_loader mt76 * fix default mac address handling iwlwifi * fix merge damage which lead to firmware crashing during boot on some devices * fix device initialisation regression on some devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17dpaa2-ptp: fix double free of the ptp_qoriq IRQIoana Ciornei
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was used on the remove path to free any allocated resources. The ptp_qoriq IRQ is among these resources that are freed in ptp_qoriq_free() even though it is also a managed one (allocated using devm_request_threaded_irq). Drop the resource managed version of requesting the IRQ in order to not trigger a double free of the interrupt as below: [ 226.731005] Trying to free already-free IRQ 126 [ 226.735533] WARNING: CPU: 6 PID: 749 at kernel/irq/manage.c:1707 __free_irq+0x9c/0x2b8 [ 226.743435] Modules linked in: [ 226.746480] CPU: 6 PID: 749 Comm: bash Tainted: G W 5.4.0-03629-gfd7102c32b2c-dirty #912 [ 226.755857] Hardware name: NXP Layerscape LX2160ARDB (DT) [ 226.761244] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 226.766022] pc : __free_irq+0x9c/0x2b8 [ 226.769758] lr : __free_irq+0x9c/0x2b8 [ 226.773493] sp : ffff8000125039f0 (...) [ 226.856275] Call trace: [ 226.858710] __free_irq+0x9c/0x2b8 [ 226.862098] free_irq+0x30/0x70 [ 226.865229] devm_irq_release+0x14/0x20 [ 226.869054] release_nodes+0x1b0/0x220 [ 226.872790] devres_release_all+0x34/0x50 [ 226.876790] device_release_driver_internal+0x100/0x1c0 Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver") Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17Merge tag 'for-5.5-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A mix of regression fixes and regular fixes for stable trees: - fix swapped error messages for qgroup enable/rescan - fixes for NO_HOLES feature with clone range - fix deadlock between iget/srcu lock/synchronize srcu while freeing an inode - fix double lock on subvolume cross-rename - tree log fixes * fix missing data checksums after replaying a log tree * also teach tree-checker about this problem * skip log replay on orphaned roots - fix maximum devices constraints for RAID1C -3 and -4 - send: don't print warning on read-only mount regarding orphan cleanup - error handling fixes" * tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: send: remove WARN_ON for readonly mount btrfs: do not leak reloc root if we fail to read the fs root btrfs: skip log replay on orphaned roots btrfs: handle ENOENT in btrfs_uuid_tree_iterate btrfs: abort transaction after failed inode updates in create_subvol Btrfs: fix hole extent items with a zero size after range cloning Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues Btrfs: make tree checker detect checksum items with overlapping ranges Btrfs: fix missing data checksums after replaying a log tree btrfs: return error pointer from alloc_test_extent_buffer btrfs: fix devs_max constraints for raid1c3 and raid1c4 btrfs: tree-checker: Fix error format string for size_t btrfs: don't double lock the subvol_sem for rename exchange btrfs: handle error in btrfs_cache_block_group btrfs: do not call synchronize_srcu() in inode_tree_del Btrfs: fix cloning range with a hole when using the NO_HOLES feature btrfs: Fix error messages in qgroup_rescan_init
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 16:49:57 +0000