| Age | Commit message (Collapse) | Author |
|---|
|
The website http://www.linux-iscsi.org/ disappeared more than a year ago.
DNS records have been removed for linux-iscsi.org. The company that
sponsored this website (Datera; formerly called Rising Tide) has been
liquidated in early 2021 according to
https://blocksandfiles.com/2021/03/19/datera-is-being-liquidated/. Since
it is unlikely that the website http://www.linux-iscsi.org/ will be
restored, remove the references to that website.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230920200232.3721784-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a per target protocol field so target code can determine correct
protocol specific actions as well as identify the correct channel group
target list.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-12-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The target discovery buffer that the VIOS populates with targets is
currently a host adapter field. To facilitate the discovery of NVMe targets
as well as SCSI another discovery buffer is required. Move the discovery
buffer out of the host struct and into the ibmvfc_channels struct so that
each channels instance for a given protocol has its own discovery buffer.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-11-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are cases in the generic code where protocol specific configuration
or actions may need to be taken. Add a protocol field to struct
ibmvfc_channels and initial IBMVFC_PROTO_[SCSI/NVME] definitions.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-10-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With the coming of NVMeoF support the driver will need to also allocate
channels for NVMe. Implement generic channel allocation wrappers that can
be used for both SCSI and NVMeoF protocol setup.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-9-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add fields for desired and max number of queues to ibmvfc_channels. With
support for NVMeoF protocol coming these sorts of values should be tracked
in the protocol specific channel struct instead of the overarching host
adapter.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-8-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is nothing scsi specific about the ibmvfc_scsi_channels struct. It is
meant to encapsulate a set of channels regardless of protocol.
Remove _scsi from the struct name to reflect this genric nature.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-7-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are currently 9 binary flag fields in the ibmvfc host
structure. Converting each of these to a single bitfield reduces the foot
print of the structure by 32 bytes.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-6-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ
during cleanup") wrongly changed the busy loop check to use
rtas_busy_delay() instead of H_BUSY and H_IS_LONG_BUSY(). The busy return
codes for RTAS and hypercalls are not the same.
Fix this issue by restoring the use of H_BUSY and H_IS_LONG_BUSY().
Fixes: 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ during cleanup")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-5-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
An LPAR could potentially be configured with a small logical cpu count that
is less then the default hardware queue max. Ensure that we don't allocate
more hw queues than available cpus.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-4-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Extend ibmvfc_queue, ibmvfc_event, and ibmvfc_event_pool to provide queue
depths for general I/O commands and reserved commands as well as proper
accounting of the free events of each type from the general event
pool. Further, calculate the negotiated max command limit with the VIOS at
NPIV login time as a function of the number of queues times their total
queue depth (general and reserved depths combined).
This does away with the legacy max_request value, and allows the driver to
better manage and track it resources.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-3-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In practice the driver should never send more commands than are allocated
to a queue's event pool. In the unlikely event that this happens, the code
asserts a BUG_ON, and in the case that the kernel is not configured to
crash on panic returns a junk event pointer from the empty event list
causing things to spiral from there. This BUG_ON is a historical artifact
of the ibmvfc driver first being upstreamed, and it is well known now that
the use of BUG_ON is bad practice except in the most unrecoverable
scenario. There is nothing about this scenario that prevents the driver
from recovering and carrying on.
Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL
pointer in the case of an empty event pool. Update all call sites to
ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate
failure or recovery action.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-2-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, if CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is enabled, the
memory space used by DFX is allocated during device initialization, which
occupies a large number of memory resources. The memory usage before and
after the driver is loaded is as follows:
Memory usage before the driver is loaded:
$ free -m
total used free shared buff/cache available
Mem: 867352 2578 864037 11 735 861681
Swap: 4095 0 4095
Memory usage after the driver which include 4 HBAs is loaded:
$ insmod hisi_sas_v3_hw.ko
$ free -m
total used free shared buff/cache available
Mem: 867352 4760 861848 11 743 859495
Swap: 4095 0 4095
The driver with 4 HBAs connected will allocate about 110 MB of memory
without enabling debugfs.
Therefore, to avoid wasting memory resources, DFX memory is allocated
during dump triggering. The dump may fail due to memory allocation
failure. After this change, each dump costs about 10 MB of memory, and each
dump lasts about 100 ms.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, register information dump is performed via workqueue, regardless
of the trigger mode (automatic or manual). There is a delay in dumping
register through workqueue, the exact register information at trigger time
cannot be obtained.
Call register snapshot directly instead of through a workqueue.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If init debugfs failed during device registration due to memory allocation
failure, debugfs_remove_recursive() is called, after which debugfs_dir is
not set to NULL. debugfs_remove_recursive() will be called again during
device removal. As a result, illegal pointer is accessed.
[ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs!
...
[ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 1669.872669] pc : down_write+0x24/0x70
[ 1669.876315] lr : down_write+0x1c/0x70
[ 1669.879961] sp : ffff000036f53a30
[ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8
[ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000
[ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270
[ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8
[ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310
[ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10
[ 1669.914982] x17: 0000000000000000 x16: 0000000000000000
[ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870
[ 1669.925555] x13: 0000000000000040 x12: 0000000000000228
[ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0
[ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10
[ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff
[ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00
[ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000
[ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001
[ 1669.962563] Call trace:
[ 1669.965000] down_write+0x24/0x70
[ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0
[ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main]
[ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw]
[ 1669.984175] pci_device_remove+0x48/0xd8
[ 1669.988082] device_release_driver_internal+0x1b4/0x250
[ 1669.993282] device_release_driver+0x28/0x38
[ 1669.997534] pci_stop_bus_device+0x84/0xb8
[ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40
[ 1670.007244] remove_store+0xfc/0x140
[ 1670.010802] dev_attr_store+0x44/0x60
[ 1670.014448] sysfs_kf_write+0x58/0x80
[ 1670.018095] kernfs_fop_write+0xe8/0x1f0
[ 1670.022000] __vfs_write+0x60/0x190
[ 1670.025472] vfs_write+0xac/0x1c0
[ 1670.028771] ksys_write+0x6c/0xd8
[ 1670.032071] __arm64_sys_write+0x24/0x30
[ 1670.035977] el0_svc_common+0x78/0x130
[ 1670.039710] el0_svc_handler+0x38/0x78
[ 1670.043442] el0_svc+0x8/0xc
To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1694571327-78697-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To
improve here there is a quest to make the remove callback return void. In
the first step of this quest all drivers are converted to .remove_new()
which already returns void. Eventually after all drivers are converted,
.remove_new() is renamed to .remove().
All platform drivers below drivers/ufs/ unconditionally return zero in
their remove callback and so can be converted trivially to the variant
returning void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917145722.1131557-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Damien Le Moal <dlemoal@kernel.org> says:
The first patch of this series fixes an issue with IRQ setup which
prevents the controller from resuming after a system suspend. The
following patches are code cleanup without any functional changes.
[mkp: The first patch went into v6.6-rc2 and thus this merge
constitutes the remaining patches of the series]
Link: https://lore.kernel.org/r/20230911232745.325149-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the macro PM8001_READ_VPD used to define if a controller WWN should
be retrieved from the device. Instead, define the better named boolean
module parameter "read_wwn" to control this.
The code to set a fixed address for a phy device address when read_wwn is
set to false is simplified and fixed to avoid sparse warnings.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-11-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the macro PM8001_USE_TASKLET used to conditionally use tasklets for
MSI-X interrupts handling and replace it with the boolean module parameter
pm8001_use_tasklet. This parameter defaults to true and can be true only if
pm8001_use_msix is also true.
Code conditionnaly defined with PM8001_USE_TASKLET is modified to instead
use the parameter pm8001_use_tasklet.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-10-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The pm8001 driver does not compile if PM8001_USE_MSIX is not defined in
pm8001_sas.h because various fields and functions conditionally defined are
used unconditionally without a "#ifdef PM8001_USE_MSIX" protection. This
macro is rather useless anyway and not convenient as diabling MSI-X use
requires recompiling the driver.
Remove this macro and replace it with the bool module parameter "use_msix"
which defaults to true. The use of MSI-X interrupts for an adapter is gated
by this module parameter for adapters that actually support MSI-X. The
"use_msix" boolean field is added to struct pm8001_hba_info and all code
defined depending on PM8001_USE_MSIX is modified to rely on
pm8001_hba_info->use_msix instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-9-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the functions pm80xx_chip_intx_interrupt_enable() and
pm80xx_chip_intx_interrupt_disable() and open code them respectively in
pm80xx_chip_interrupt_enable() and pm80xx_chip_interrupt_disable().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-8-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
pm8001_chip_msix_interrupt_enable() and
pm8001_chip_msix_interrupt_disable() are always cold with the vector
argument equal to 0. This allows simplifying the code for these
functions. With this change, the functions are simple enough and can be
removed by open coding them directly in pm8001_chip_interrupt_enable() and
pm8001_chip_interrupt_disable(). Also do the same for the functions
pm8001_chip_intx_interrupt_enable() and
pm8001_chip_intx_interrupt_disable() and remove these functions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-7-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Factor out the common code of pm8001_interrupt_handler_msix and of
pm8001_interrupt_handler_intx() into the new function pm8001_handle_irq()
and use this new helper in these two functions to simplify the code.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-6-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Factor out the identical code for killing tasklets in pm8001_pci_remove()
and pm8001_pci_suspend() and instead use the new function
pm8001_kill_tasklet().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-5-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Factor out the identical code for initializing tasklets in
pm8001_pci_alloc() and pm8001_pci_resume() and instead use the new function
pm8001_init_tasklet().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-4-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of repeating the same code twice in pm8001_pci_remove() and
pm8001_pci_suspend() to free IRQs, introduuce the function
pm8001_free_irq() to do that.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-3-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Nitin Rawat <quic_nitirawa@quicinc.com> says:
This patch series adds programming support for Qualcomm UFS V4 and
above to align avoid with Hardware Specification. This patch series
will address stability and performance issues.
In this patch series below changes are taken care.
1) Register layout for DME_VS_CORE_CLK_CTRL has changed for v4 and above.
2) Adds Support to configure PA_VS_CORE_CLK_40NS_CYCLES attibute for UFS V4
and above.
3) Adds Support to configure multiple unipro frequencies like 403MHz,
300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz for Qualcomm UFS Controller V4
and above.
4) Allow configuration of SYS1CLK_1US_REG for UFS V4 and above.
Link: https://lore.kernel.org/r/20230905052400.13935-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "hs_gear" variable is used to cache the gear setting for the PHY that
will be used during ufs_qcom_power_up_sequence(). But it creates ambiguity
with the gear setting used by the ufshcd driver.
So let's rename it to "phy_gear" to make it explicit that this variable
caches the gear setting for the PHY.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-2-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "hs_gear" variable is used to program the PHY settings (submode) during
ufs_qcom_power_up_sequence(). Currently, it is being updated every time the
agreed gear changes. Due to this, if the gear got downscaled before suspend
(runtime/system), then while resuming, the PHY settings for the lower gear
will be applied first and later when scaling to max gear with REINIT, the
PHY settings for the max gear will be applied.
This adds a latency while resuming and also really not needed as the PHY
gear settings are backwards compatible i.e., we can continue using the PHY
settings for max gear with lower gear speed.
So let's update the "hs_gear" variable _only_ when the agreed gear is
greater than the current one. This guarantees that the PHY settings will be
changed only during probe time and fatal error condition.
Due to this, UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH can now be skipped
when the PM operation is in progress.
Cc: stable@vger.kernel.org
Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Reported-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230908145329.154024-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SYS1CLK_1US represents the required number of system 1-clock cycles for one
microsecond. UFS Host Controller V4.0 and above mandates to write
SYS1CLK_1US_REG register and also these timer configuration needs to be
called from clk scaling pre ops as per HPG.
Refactor ufs_qcom_cfg_timers and add the below code support to align
with HPG.
a)Configure SYS1CLK_1US_REG for UFS V4 and above.
b)Introduce a new argument is_pre_scale_up for ufs_qcom_cfg_timers
to configure SYS1CLK_1US for max freq during prescale and link startup
condition.
c)Move ufs_qcom_cfg_timers from clk scaling post change ops
to clk scaling pre change ops.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-6-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES are configured
in clk scaling post change ops. This is not aligning to HPG.
Move this to clk scaling pre change ops to align completely with hardware
specification.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-5-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PA_VS_CORE_CLK_40NS_CYCLES attribute represents the required number of
Qunipro core clock for 40 nanoseconds. For UFS host controller V4 and above
PA_VS_CORE_CLK_40NS_CYCLES needs to be programmed as per frequency of
unipro core clk of UFS host controller.
Add Support to configure PA_VS_CORE_CLK_40NS_CYCLES for Controller V4 and
above to align with the hardware specification and to avoid functionality
issues like h8 enter/exit failure, command timeout.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-4-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Qualcomm UFS Controller V4 and above supports multiple unipro frequencies
like 403MHz, 300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz. Current code
supports only 150MHz and 75MHz which have performance impact due to low UFS
controller frequencies.
For targets which supports frequencies other than 150 MHz and 75 Mhz, needs
an update of MAX_CORE_CLK_1US_CYCLES to match the configured frequency to
avoid functionality issues. Add multiple frequency support for
MAX_CORE_CLK_1US_CYCLES based on the frequency configured.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-3-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS Controller V4 and above, the register layout for DME_VS_CORE_CLK_CTRL
register has changed. MAX_CORE_CLK_1US_CYCLES offset has changed from 0 to
0x10 and length of attrbute is changed from 8bit to 12bit.
Add support to configure MAX_CORE_CLK_1US_CYCLES for UFS V4 and above as
per new register layout.
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230905052400.13935-2-quic_nitirawa@quicinc.com
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix in the imm driver the same problem that was fixed in the ppa driver by
commit 68a4f84a17c1 ("scsi: ppa: Add a module parameter for the transfer
mode").
Tested and confirmed working with an Iomega Z250P zip drive and a StarTech
PEX1P2 AX99100 PCIe parallel port.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20230831054620.515611-1-alexhenrie24@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sas_discover_end_dev() is defined and used only in sas_discover.c. Define
this function as static.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230912230551.454357-4-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sas_set_phy_speed() is used only within sas_init.c. Declare this function
as static.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230912230551.454357-3-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the declarations of functions used only within libsas from
include/scsi/libsas.h to drivers/scsi/libsas/sas_internal.h
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230912230551.454357-2-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bindings do not allow vdd-hba-max-microamp property and the driver does not
use it (does not control load of vdd-hba supply). Skip looking for this
property to avoid misleading dmesg messages:
ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: unable to find vdd-hba-max-microamp
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230906113302.201888-1-krzysztof.kozlowski@linaro.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use FIELD_GET() to extract PCIe capability registers field instead of
custom masking and shifting.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230913122748.29530-9-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use FIELD_GET() to extract PCIe capability register fields instead of
custom masking and shifting. Also remove the unnecessary cast to u8, the
value in those fields always fits to u8.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230913122748.29530-8-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During rmmod, when dev_loss_tmo callback is called, an ndlp kref count is
decremented twice. Once for SCSI transport registration and second to
remove the initial node allocation kref. If there is also an NVMe
transport registration, another reference count decrement is expected in
lpfc_nvme_unregister_port().
Race conditions between the NVMe transport remoteport_delete and
dev_loss_tmo callbacks sometimes results in premature ndlp object release
resulting in use-after-free issues.
Fix by not dropping the ndlp object in dev_loss_tmo callback with an
outstanding NVMe transport registration. Inversely, mark the final
NLP_DROPPED flag in lpfc_nvme_unregister_port when rmmod flag is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230908211923.37603-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a dev_loss_tmo event occurs, an ndlp lock is taken before checking
nlp_flag for NLP_DROPPED. There is an attempt to restore the ndlp lock
when exiting the if statement, but the nlp_put kref could be the final
decrement causing a use-after-free memory access on a released ndlp object.
Instead of trying to reacquire the ndlp lock after checking nlp_flag, just
return after calling nlp_put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230908211852.37576-1-justintee8345@gmail.com
Reviewed-by: "Ewan D. Milne" <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since debugfs_create_file() returns ERR_PTR and never NULL, use IS_ERR() to
check the return value.
Fixes: 2fcbc569b9f5 ("scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSI")
Fixes: 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures")
Fixes: 6a828b0f6192 ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues")
Fixes: 95bfc6d8ad86 ("scsi: lpfc: Make FW logging dynamically configurable")
Fixes: 9f77870870d8 ("scsi: lpfc: Add debugfs support for cm framework buffers")
Fixes: c490850a0947 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230906030809.2847970-1-ruanjinjie@huawei.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The logical unit information is missing from the UFS command tracing
output. Although the device name is logged, e.g. 13200000.ufs, this name
does not include logical unit information. Hence this patch that replaces
the device name with the SCSI ID in the tracing output. An example of
tracing output with this patch applied:
kworker/8:0H-80 [008] ..... 89.106063: ufshcd_command: send_req: 0:0:0:4: tag: 10, DB: 0x7ffffbff, size: 524288, IS: 0, LBA: 1085538, opcode: 0x8a (WRITE_16), group_id: 0x0
dd-4225 [000] d.h.. 89.106219: ufshcd_command: complete_rsp: 0:0:0:4: tag: 11, DB: 0x7ffff7ff, size: 524288, IS: 0, LBA: 1081728, opcode: 0x8a (WRITE_16), group_id: 0x0
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230907183739.905938-1-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The target_cmd_counter struct allocated via target_alloc_cmd_counter() is
never freed, resulting in leaks across various transport types, e.g.:
unreferenced object 0xffff88801f920120 (size 96):
comm "sh", pid 102, jiffies 4294892535 (age 713.412s)
hex dump (first 32 bytes):
07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8.......
backtrace:
[<00000000e58a6252>] kmalloc_trace+0x11/0x20
[<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod]
[<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod]
[<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop]
[<000000006a80e021>] configfs_write_iter+0xb1/0x120
[<00000000e9f4d860>] vfs_write+0x2e4/0x3c0
[<000000008143433b>] ksys_write+0x80/0xb0
[<00000000a7df29b2>] do_syscall_64+0x42/0x90
[<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Free the structure alongside the corresponding iscsit_conn / se_sess
parent.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20230831183459.6938-1-ddiss@suse.de
Fixes: becd9be6069e ("scsi: target: Move sess cmd counter to new struct")
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which
leads all drives being removed from the system.
Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that MSI-X setup is performed both during
normal initialization and resume operations.
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
OPC_INB_SET_CONTROLLER_CONFIG command
Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed
when we receive the response.
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some cards have more than one SAS address. Using an incorrect address
causes communication issues with some devices like expanders.
Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in staged fixes for 6.6.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
