| Age | Commit message (Collapse) | Author |
|---|
|
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Reported-by: Slavin Liu <slavin-ayu@qq.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
modprobe drm_hdmi_state_helper_test and then rmmod it, the following
memory leak occurs.
The `mode` allocated in drm_mode_duplicate() called by
drm_display_mode_from_cea_vic() is not freed, which cause the memory leak:
unreferenced object 0xffffff80ccd18100 (size 128):
comm "kunit_try_catch", pid 1851, jiffies 4295059695
hex dump (first 32 bytes):
57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ .....
ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................
backtrace (crc c2f1aa95):
[<000000000f10b11b>] kmemleak_alloc+0x34/0x40
[<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c
[<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98
[<0000000019daaacf>] 0xffffffedc11ae69c
[<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac
[<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000a0b2e9e>] kthread+0x2e8/0x374
[<00000000bd668858>] ret_from_fork+0x10/0x20
......
Free `mode` by using drm_kunit_display_mode_from_cea_vic()
to fix it.
Cc: stable@vger.kernel.org
Fixes: 4af70f19e559 ("drm/tests: Add RGB Quantization tests")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-4-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
modprobe drm_connector_test and then rmmod drm_connector_test,
the following memory leak occurs.
The `mode` allocated in drm_mode_duplicate() called by
drm_display_mode_from_cea_vic() is not freed, which cause the memory leak:
unreferenced object 0xffffff80cb0ee400 (size 128):
comm "kunit_try_catch", pid 1948, jiffies 4294950339
hex dump (first 32 bytes):
14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8.
3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e...........
backtrace (crc 90e9585c):
[<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40
[<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000c2062161>] drm_mode_duplicate+0x44/0x19c
[<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98
[<00000000d8f2c8b4>] 0xffffffdc982a4868
[<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac
[<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000006ea56ca0>] kthread+0x2e8/0x374
[<000000000676063f>] ret_from_fork+0x10/0x20
......
Free `mode` by using drm_kunit_display_mode_from_cea_vic()
to fix it.
Cc: stable@vger.kernel.org
Fixes: abb6f74973e2 ("drm/tests: Add HDMI TDMS character rate tests")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-3-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
As Maxime suggested, add a new helper
drm_kunit_display_mode_from_cea_vic(), it can replace the direct call
of drm_display_mode_from_cea_vic(), and it will help solving
the `mode` memory leaks.
Acked-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Some page flags (page->flags) were converted to page types
(page->page_types). A recent example is PG_hugetlb.
From the exclusive writer's perspective, e.g., a thread doing
__folio_set_hugetlb(), there is a difference between the page flag and
type APIs: the former allows the same non-atomic operation to be repeated
whereas the latter does not. For example, calling __folio_set_hugetlb()
twice triggers VM_BUG_ON_FOLIO(), since the second call expects the type
(PG_hugetlb) not to be set previously.
Using add_hugetlb_folio() as an example, it calls __folio_set_hugetlb() in
the following error-handling path. And when that happens, it triggers the
aforementioned VM_BUG_ON_FOLIO().
if (folio_test_hugetlb(folio)) {
rc = hugetlb_vmemmap_restore_folio(h, folio);
if (rc) {
spin_lock_irq(&hugetlb_lock);
add_hugetlb_folio(h, folio, false);
...
It is possible to make hugeTLB comply with the new requirements from the
page type API. However, a straightforward fix would be to just allow the
same page type to be set or cleared again inside the API, to avoid any
changes to its callers.
Link: https://lkml.kernel.org/r/20241020042212.296781-1-yuzhao@google.com
Fixes: d99e3140a4d3 ("mm: turn folio_test_hugetlb into a PageType")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c39 ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints.
Link: https://lkml.kernel.org/r/20241020050003.4308-1-konishi.ryusuke@gmail.com
Fixes: 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9ef37ac20608f4836256
Tested-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reports a slab out of bounds access in squashfs_readpage_block().
This is caused by an attempt to read page index 0x2000000000. This value
(start_index) is stored in an integer loop variable which overflows
producing a value of 0. This causes a loop which iterates over pages
start_index -> end_index to iterate over 0 -> end_index, which ultimately
causes an out of bounds page array access.
Fix by changing variable to a loff_t, and rename to index to make it
clearer it is a page index, and not a loop count.
Link: https://lkml.kernel.org/r/20241020232200.837231-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZwzcnCAosIPqQ9Ie@ly-workstation/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 1a2473f0cbc0 ("kasan: improve vmalloc tests") added the
vmalloc_percpu KASAN test with the assumption that __alloc_percpu always
uses vmalloc internally, which is tagged by KASAN.
However, __alloc_percpu might allocate memory from the first per-CPU
chunk, which is not allocated via vmalloc(). As a result, the test might
fail.
Remove the test until proper KASAN annotation for the per-CPU allocated
are added; tracked in https://bugzilla.kernel.org/show_bug.cgi?id=215019.
Link: https://lkml.kernel.org/r/20241022160706.38943-1-andrey.konovalov@linux.dev
Fixes: 1a2473f0cbc0 ("kasan: improve vmalloc tests")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/all/4a245fff-cc46-44d1-a5f9-fd2f1c3764ae@sifive.com/
Reported-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/all/CACzwLxiWzNqPBp4C1VkaXZ2wDwvY3yZeetCi1TLGFipKW77drA@mail.gmail.com/
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit e6d2c436ff693 ("tools/mm: allow users to provide additional
cflags/ldflags") passes now CFLAGS to Makefile. With this, build systems
with default -Werror enabled found:
slabinfo.c:1300:25: error: ignoring return value of 'chdir'
declared with attribute 'warn_unused_result' [-Werror=unused-result]
chdir("..");
^~~~~~~~~~~
page-types.c:397:35: error: format '%lu' expects argument of type
'long unsigned int', but argument 2 has type 'uint64_t'
{aka 'long long unsigned int'} [-Werror=format=]
printf("%lu\t", mapcnt0);
~~^ ~~~~~~~
..
Fix page-types by using PRIu64 for uint64_t prints and check in slabinfo
for return code on chdir("..").
Link: https://lkml.kernel.org/r/c1ceb507-94bc-461c-934d-c19b77edd825@gmail.com
Fixes: e6d2c436ff69 ("tools/mm: allow users to provide additional cflags/ldflags")
Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running low on usable slots, cluster allocator will try to reclaim
the full clusters aggressively to reclaim HAS_CACHE slots. This
guarantees that as long as there are any usable slots, HAS_CACHE or not,
the swap device will be usable and workload won't go OOM early.
Before the cluster allocator, swap allocator fails easily if device is
filled up with reclaimable HAS_CACHE slots. Which can be easily
reproduced with following simple program:
#include <stdio.h>
#include <string.h>
#include <linux/mman.h>
#include <sys/mman.h>
#define SIZE 8192UL * 1024UL * 1024UL
int main(int argc, char **argv) {
long tmp;
char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
memset(p, 0, SIZE);
madvise(p, SIZE, MADV_PAGEOUT);
for (unsigned long i = 0; i < SIZE; ++i)
tmp += p[i];
getchar(); /* Pause */
return 0;
}
Setup an 8G non ramdisk swap, the first run of the program will swapout 8G
ram successfully. But run same program again after the first run paused,
the second run can't swapout all 8G memory as now half of the swap device
is pinned by HAS_CACHE. There was a random scan in the old allocator that
may reclaim part of the HAS_CACHE by luck, but it's unreliable.
The new allocator's added reclaim of full clusters when device is low on
usable slots. But when multiple CPUs are seeing the device is low on
usable slots at the same time, they ran into a thundering herd problem.
This is an observable problem on large machine with mass parallel
workload, as full cluster reclaim is slower on large swap device and
higher number of CPUs will also make things worse.
Testing using a 128G ZRAM on a 48c96t system. When the swap device is
very close to full (eg. 124G / 128G), running build linux kernel with
make -j96 in a 1G memory cgroup will hung (not a softlockup though)
spinning in full cluster reclaim for about ~5min before go OOM.
To solve this, split the full reclaim into two parts:
- Instead of do a synchronous aggressively reclaim when device is low,
do only one aggressively reclaim when device is strictly full with a
kworker. This still ensures in worst case the device won't be unusable
because of HAS_CACHE slots.
- To avoid allocation (especially higher order) suffer from HAS_CACHE
filling up clusters and kworker not responsive enough, do one synchronous
scan every time the free list is drained, and only scan one cluster. This
is kind of similar to the random reclaim before, keeps the full clusters
rotated and has a minimal latency. This should provide a fair reclaim
strategy suitable for most workloads.
Link: https://lkml.kernel.org/r/20241022175512.10398-1-ryncsn@gmail.com
Fixes: 2cacbdfdee65 ("mm: swap: add a adaptive full cluster cache reclaim")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to PSWPOUT, we should count the number of base pages instead of
large folios.
Link: https://lkml.kernel.org/r/20241023210201.2798-1-21cnbao@gmail.com
Fixes: 242d12c98174 ("mm: support large folios swap-in for sync io devices")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
An anonymous large folio can be split into non order-0 folios,
try_to_map_unused_to_zeropage() should not VM_BUG_ON compound pages but
just return false. This fixes the crash when splitting anonymous large
folios to non order-0 folios.
Link: https://lkml.kernel.org/r/20241023171236.1122535-1-ziy@nvidia.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When we compile and load lib/slub_kunit.c,it will cause a panic.
The root cause is that __kmalloc_cache_noprof was directly called instead
of kmem_cache_alloc,which resulted in no alloc_tag being allocated.This
caused current->alloc_tag to be null,leading to a null pointer dereference
in alloc_tag_ref_set.
Despite the fact that my colleague Pei Xiao will later fix the code in
slub_kunit.c,we still need fix null pointer check logic for ref and tag to
avoid panic caused by a null pointer dereference.
Here is the log for the panic:
[ 74.779373][ T2158] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 74.780130][ T2158] Mem abort info:
[ 74.780406][ T2158] ESR = 0x0000000096000004
[ 74.780756][ T2158] EC = 0x25: DABT (current EL), IL = 32 bits
[ 74.781225][ T2158] SET = 0, FnV = 0
[ 74.781529][ T2158] EA = 0, S1PTW = 0
[ 74.781836][ T2158] FSC = 0x04: level 0 translation fault
[ 74.782288][ T2158] Data abort info:
[ 74.782577][ T2158] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 74.783068][ T2158] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 74.783533][ T2158] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 74.784010][ T2158] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000105f34000
[ 74.784586][ T2158] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000
[ 74.785293][ T2158] Internal error: Oops: 0000000096000004 [#1] SMP
[ 74.785805][ T2158] Modules linked in: slub_kunit kunit ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle 4
[ 74.790661][ T2158] CPU: 0 UID: 0 PID: 2158 Comm: kunit_try_catch Kdump: loaded Tainted: G W N 6.12.0-rc3+ #2
[ 74.791535][ T2158] Tainted: [W]=WARN, [N]=TEST
[ 74.791889][ T2158] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 74.792479][ T2158] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 74.793101][ T2158] pc : alloc_tagging_slab_alloc_hook+0x120/0x270
[ 74.793607][ T2158] lr : alloc_tagging_slab_alloc_hook+0x120/0x270
[ 74.794095][ T2158] sp : ffff800084d33cd0
[ 74.794418][ T2158] x29: ffff800084d33cd0 x28: 0000000000000000 x27: 0000000000000000
[ 74.795095][ T2158] x26: 0000000000000000 x25: 0000000000000012 x24: ffff80007b30e314
[ 74.795822][ T2158] x23: ffff000390ff6f10 x22: 0000000000000000 x21: 0000000000000088
[ 74.796555][ T2158] x20: ffff000390285840 x19: fffffd7fc3ef7830 x18: ffffffffffffffff
[ 74.797283][ T2158] x17: ffff8000800e63b4 x16: ffff80007b33afc4 x15: ffff800081654c00
[ 74.798011][ T2158] x14: 0000000000000000 x13: 205d383531325420 x12: 5b5d383734363537
[ 74.798744][ T2158] x11: ffff800084d337e0 x10: 000000000000005d x9 : 00000000ffffffd0
[ 74.799476][ T2158] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008219d188 x6 : c0000000ffff7fff
[ 74.800206][ T2158] x5 : ffff0003fdbc9208 x4 : ffff800081edd188 x3 : 0000000000000001
[ 74.800932][ T2158] x2 : 0beaa6dee1ac5a00 x1 : 0beaa6dee1ac5a00 x0 : ffff80037c2cb000
[ 74.801656][ T2158] Call trace:
[ 74.801954][ T2158] alloc_tagging_slab_alloc_hook+0x120/0x270
[ 74.802494][ T2158] __kmalloc_cache_noprof+0x148/0x33c
[ 74.802976][ T2158] test_kmalloc_redzone_access+0x4c/0x104 [slub_kunit]
[ 74.803607][ T2158] kunit_try_run_case+0x70/0x17c [kunit]
[ 74.804124][ T2158] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit]
[ 74.804768][ T2158] kthread+0x10c/0x118
[ 74.805141][ T2158] ret_from_fork+0x10/0x20
[ 74.805540][ T2158] Code: b9400a80 11000400 b9000a80 97ffd858 (f94012d3)
[ 74.806176][ T2158] SMP: stopping secondary CPUs
[ 74.808130][ T2158] Starting crashdump kernel...
Link: https://lkml.kernel.org/r/20241020070819.307944-1-hao.ge@linux.dev
Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a driver tries to call any of the pin_user_pages*(FOLL_LONGTERM) family
of functions, and requests "too many" pages, then the call will
erroneously leave pages pinned. This is visible in user space as an
actual memory leak.
Repro is trivial: just make enough pin_user_pages(FOLL_LONGTERM) calls to
exhaust memory.
The root cause of the problem is this sequence, within
__gup_longterm_locked():
__get_user_pages_locked()
rc = check_and_migrate_movable_pages()
...which gets retried in a loop. The loop error handling is incomplete,
clearly due to a somewhat unusual and complicated tri-state error API.
But anyway, if -ENOMEM, or in fact, any unexpected error is returned from
check_and_migrate_movable_pages(), then __gup_longterm_locked() happily
returns the error, while leaving the pages pinned.
In the failed case, which is an app that requests (via a device driver)
30720000000 bytes to be pinned, and then exits, I see this:
$ grep foll /proc/vmstat
nr_foll_pin_acquired 7502048
nr_foll_pin_released 2048
And after applying this patch, it returns to balanced pins:
$ grep foll /proc/vmstat
nr_foll_pin_acquired 7502048
nr_foll_pin_released 7502048
Note that the child routine, check_and_migrate_movable_folios(), avoids
this problem, by unpinning any folios in the **folios argument, before
returning an error.
Fix this by making check_and_migrate_movable_pages() behave in exactly the
same way as check_and_migrate_movable_folios(): unpin all pages in
**pages, before returning an error.
Also, documentation was an aggravating factor, so:
1) Consolidate the documentation for these two routines, now that they
have identical external behavior.
2) Rewrite the consolidated documentation:
a) Clearly list the three return code cases, and what happens in
each case.
b) Mention that one of the cases unpins the pages or folios, before
returning an error code.
Link: https://lkml.kernel.org/r/20241018223411.310331-1-jhubbard@nvidia.com
Fixes: 24a95998e9ba ("mm/gup.c: simplify and fix check_and_migrate_movable_pages() return codes")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988
Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the
'mediatek/mt7988' directory while driver current expects the files in
the 'mediatek' directory.
Change path in the driver header now that the firmware has been added.
Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
mlxsw: Fixes
In this patchset:
- Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make
sure that there is both enough room to push the Tx header and that the
SKB header is not cloned and can be modified.
- Commit b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers
allocation") converted mlxsw to use page pool for Rx buffers allocation.
Sync for CPU and for device should be done for Rx pages. In patches #2
and #3, add the missing calls to sync pages for, respectively, CPU and
the device.
- Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds
a generic forwarding test that fails with mlxsw ports prior to the fix.
====================
Link: https://patch.msgid.link/cover.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that after changing the remote address of an ip6gre net device
traffic is forwarded as expected. Test with both flat and hierarchical
topologies and with and without an input / output keys.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/02b05246d2cdada0cf2fccffc0faa8a424d0f51b.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
<TASK>
mlxsw_sp_router_netdevice_event+0x55f/0x1240
notifier_call_chain+0x5a/0xd0
call_netdevice_notifiers_info+0x39/0x90
unregister_netdevice_many_notify+0x63e/0x9d0
rtnl_dellink+0x16b/0x3a0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x1de/0x420
____sys_sendmsg+0x2bd/0x320
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[3]
unreferenced object 0xffff898081f597a0 (size 32):
comm "ip", pid 1626, jiffies 4294719324
hex dump (first 32 bytes):
20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ...............
21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia.............
backtrace (crc fd9be911):
[<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260
[<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340
[<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240
[<00000000743e7757>] notifier_call_chain+0x5a/0xd0
[<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90
[<000000002509645d>] register_netdevice+0x5f7/0x7a0
[<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130
[<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120
[<000000004df7c7cc>] rtnl_newlink+0x471/0xa20
[<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0
[<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100
[<00000000908bca63>] netlink_unicast+0x242/0x390
[<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420
[<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320
[<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0
[<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0
Fixes: cf42911523e0 ("mlxsw: spectrum_ipip: Use common hash table for IPv6 address mapping")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/e91012edc5a6cb9df37b78fd377f669381facfcb.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Non-coherent architectures, like ARM, may require invalidating caches
before the device can use the DMA mapped memory, which means that before
posting pages to device, drivers should sync the memory for device.
Sync for device can be configured as page pool responsibility. Set the
relevant flag and define max_len for sync.
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/92e01f05c4f506a4f0a9b39c10175dcc01994910.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When Rx packet is received, drivers should sync the pages for CPU, to
ensure the CPU reads the data written by the device and not stale
data from its cache.
Add the missing sync call in Rx path, sync the actual length of data for
each fragment.
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/461486fac91755ca4e04c2068c102250026dcd0b.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. The cited commit moved the call to skb_cow_head() from
mlxsw_sp_port_xmit() to functions which handle Tx header.
In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx
header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is
no call for skb_cow_head() before pushing Tx header size to SKB. This flow
is relevant for Spectrum-1 and Spectrum-4, for PTP packets.
Add the missing call to skb_cow_head() to make sure that there is both
enough room to push the Tx header and that the SKB header is not cloned and
can be modified.
An additional set will be sent to net-next to centralize the handling of
the Tx header by pushing it to every packet just before transmission.
Cc: Richard Cochran <richardcochran@gmail.com>
Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5145780b07ebbb5d3b3570f311254a3a2d554a44.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.
This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.
But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).
The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.
Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.
Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u
Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The llvm fix [1] did not make it for 19.0.0, but ended up getting
backported to llvm 19.1.3 [2]. Thus, fix the version requirement to
correctly specify which versions have the bug.
Link: https://github.com/llvm/llvm-project/pull/104826 [1]
Link: https://github.com/llvm/llvm-project/pull/113938 [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410281414.c351044e-oliver.sang@intel.com
Fixes: 8b8ca9c25fe6 ("cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241030-cfi-icall-1913-v1-1-ab8a26e13733@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Commit 98442f0ccd82 ("sched: Fix delayed_dequeue vs
switched_from_fair()") forgot about scx :/
Fixes: 98442f0ccd82 ("sched: Fix delayed_dequeue vs switched_from_fair()")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20241030104934.GK14555@noisy.programming.kicks-ass.net
|
|
The barrier_nospec() in 64-bit copy_from_user() is slow. Instead use
pointer masking to force the user pointer to all 1's for an invalid
address.
The kernel test robot reports a 2.6% improvement in the per_thread_ops
benchmark [1].
This is a variation on a patch originally by Josh Poimboeuf [2].
Link: https://lore.kernel.org/202410281344.d02c72a2-oliver.sang@intel.com [1]
Link: https://lore.kernel.org/5b887fe4c580214900e21f6c61095adf9a142735.1730166635.git.jpoimboe@kernel.org [2]
Tested-and-reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update more header copies with the kernel sources, including const.h,
msr-index.h, arm64's cputype.h, kvm's, bits.h and unaligned.h
- The return from 'write' isn't a pid, fix cut'n'paste error in 'perf
trace'
- Fix up the python binding build on architectures without
HAVE_KVM_STAT_SUPPORT
- Add some more bounds checks to augmented_raw_syscalls.bpf.c (used to
collect syscall pointer arguments in 'perf trace') to make the
resulting bytecode to pass the kernel BPF verifier, allowing us to go
back accepting clang 12.0.1 as the minimum version required for
compiling BPF sources
- Add __NR_capget for x86 to fix a regression on running perf + intel
PT (hw tracing) as non-root setting up the capabilities as described
in https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html
- Fix missing syscalltbl in non-explicitly listed architectures,
noticed on ARM 32-bit, that still needs a .tbl generator for the
syscall id<->name tables, should be added for v6.13
- Handle 'perf test' failure when handling broken DWARF for ASM files
* tag 'perf-tools-fixes-for-v6.12-2-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cap: Add __NR_capget to arch/x86 unistd
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers: Synchronize {uapi/}linux/bits.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf python: Fix up the build on architectures without HAVE_KVM_STAT_SUPPORT
perf test: Handle perftool-testsuite_probe failure due to broken DWARF
tools headers UAPI: Sync kvm headers with the kernel sources
perf trace: Fix non-listed archs in the syscalltbl routines
perf build: Change the clang check back to 12.0.1
perf trace augmented_raw_syscalls: Add more checks to pass the verifier
perf trace augmented_raw_syscalls: Add extra array index bounds checking to satisfy some BPF verifiers
perf trace: The return from 'write' isn't a pid
tools headers UAPI: Sync linux/const.h with the kernel headers
|
|
Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs
to have a matching xa_destroy() in rpcrdma_remove_one() to release
underlying memory that the xarray might have accrued during
operation.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Fixes: 7e86845a0346 ("rpcrdma: Implement generic device removal")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Hou Tao says:
====================
The patch set fixes several issues in bits iterator. Patch #1 fixes the
kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem
of nr_bits. Patch #4 fixes the potential stack corruption when bits
iterator is used on 32-bit host. Patch #5 adds more test cases for bits
iterator.
Please see the individual patches for more details. And comments are
always welcome.
---
v4:
* patch #1: add ack from Yafang
* patch #3: revert code-churn like changes:
(1) compute nr_bytes and nr_bits before the check of nr_words.
(2) use nr_bits == 64 to check for single u64, preventing build
warning on 32-bit hosts.
* patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)"
v3: https://lore.kernel.org/bpf/20241025013233.804027-1-houtao@huaweicloud.com/T/#t
* split the bits-iterator related patches from "Misc fixes for bpf"
patch set
* patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration
* patch #2: add a new helper for the overflow problem
* patch #3: decrease the limitation from 512 to 511 and check whether
nr_bytes is too large for bpf memory allocator explicitly
* patch #5: add two more test cases for bit iterator
v2: http://lore.kernel.org/bpf/d49fa2f4-f743-c763-7579-c3cab4dd88cb@huaweicloud.com
====================
Link: https://lore.kernel.org/r/20241030100516.3633640-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add more test cases for bits iterator:
(1) huge word test
Verify the multiplication overflow of nr_bits in bits_iter. Without
the overflow check, when nr_words is 67108865, nr_bits becomes 64,
causing bpf_probe_read_kernel_common() to corrupt the stack.
(2) max word test
Verify correct handling of maximum nr_words value (511).
(3) bad word test
Verify early termination of bits iteration when bits iterator
initialization fails.
Also rename bits_nomem to bits_too_big to better reflect its purpose.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On 32-bit hosts (e.g., arm32), when a bpf program passes a u64 to
bpf_iter_bits_new(), bpf_iter_bits_new() will use bits_copy to store the
content of the u64. However, bits_copy is only 4 bytes, leading to stack
corruption.
The straightforward solution would be to replace u64 with unsigned long
in bpf_iter_bits_new(). However, this introduces confusion and problems
for 32-bit hosts because the size of ulong in bpf program is 8 bytes,
but it is treated as 4-bytes after passed to bpf_iter_bits_new().
Fix it by changing the type of both bits and bit_count from unsigned
long to u64. However, the change is not enough. The main reason is that
bpf_iter_bits_next() uses find_next_bit() to find the next bit and the
pointer passed to find_next_bit() is an unsigned long pointer instead
of a u64 pointer. For 32-bit little-endian host, it is fine but it is
not the case for 32-bit big-endian host. Because under 32-bit big-endian
host, the first iterated unsigned long will be the bits 32-63 of the u64
instead of the expected bits 0-31. Therefore, in addition to changing
the type, swap the two unsigned longs within the u64 for 32-bit
big-endian host.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes.
Fixes: 4665415975b0 ("bpf: Add bits iterator")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_mem_alloc_check_size() to check whether the allocation
size exceeds the limitation for the kmalloc-equivalent allocator. The
upper limit for percpu allocation is LLIST_NODE_SZ bytes larger than
non-percpu allocation, so a percpu argument is added to the helper.
The helper will be used in the following patch to check whether the size
parameter passed to bpf_mem_alloc() is too big.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:
unreferenced object 0xffff88812628c8c0 (size 32):
comm "swapper/0", pid 1, jiffies 4294727320
hex dump (first 32 bytes):
b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U...........
f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 ..............
backtrace (crc 781e32cc):
[<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80
[<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0
[<00000000597124d6>] __alloc.isra.0+0x89/0xb0
[<000000004ebfffcd>] alloc_bulk+0x2af/0x720
[<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0
[<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610
[<000000008b616eac>] bpf_global_ma_init+0x19/0x30
[<00000000fc473efc>] do_one_initcall+0xd3/0x3c0
[<00000000ec81498c>] kernel_init_freeable+0x66a/0x940
[<00000000b119f72f>] kernel_init+0x20/0x160
[<00000000f11ac9a7>] ret_from_fork+0x3c/0x70
[<0000000004671da4>] ret_from_fork_asm+0x1a/0x30
That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.
Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.
Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch.
Fixes: 4665415975b0 ("bpf: Add bits iterator")
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline]
hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline]
hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline]
hci_init_sync net/bluetooth/hci_sync.c:4742 [inline]
hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline]
hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994
hci_dev_do_open net/bluetooth/hci_core.c:483 [inline]
hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015
process_one_work kernel/workqueue.c:3267 [inline]
process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348
worker_thread+0x91f/0xe50 kernel/workqueue.c:3429
kthread+0x2cb/0x360 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers (ufs and scsi_debug)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix another deadlock during RTC update
scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
|
|
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If we don't do that, the group is considered usable by userspace, but
all further GROUP_SUBMIT will fail with -EINVAL.
Changes in v3:
- Add R-bs
Changes in v2:
- New patch
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029152912.270346-3-boris.brezillon@collabora.com
|
|
Userspace can use GROUP_SUBMIT errors as a trigger to check the group
state and recreate the group if it became unusable. Make sure we
report an error when the group became unusable.
Changes in v3:
- None
Changes in v2:
- Add R-bs
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029152912.270346-2-boris.brezillon@collabora.com
|
|
The system and GPU MMU page size might differ, which becomes a
problem for FW sections that need to be mapped at explicit addresses
since our PAGE_SIZE alignment might cover a VA range that's
expected to be used for another section.
Make sure we never map more than we need.
Changes in v3:
- Add R-bs
Changes in v2:
- Plan for per-VM page sizes so the MCU VM and user VM can
have different pages sizes
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030150231.768949-1-boris.brezillon@collabora.com
|
|
This was previously fixed with commit 1147dd0503564fa0e0348
("nvme: fix error-handling for io_uring nvme-passthrough"), but the
change was mistakenly undone in a later commit.
Fixes: d6aacee9255e7f ("nvme: use bio_integrity_map_user")
Cc: stable@vger.kernel.org
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 7a277c37d352 ("nvmet-auth: Diffie-Hellman key exchange support")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
A recent commit enables integrity checks for formats the previous kernel
versions registered with the "nop" integrity profile. This means
namespaces using that format become unreadable when upgrading the kernel
past that commit.
Introduce a module parameter to restore the "nop" integrity profile so
that storage can be readable once again. This could be a boot device, so
the setting needs to happen at module load time.
Fixes: 921e81db524d17 ("nvme: allow integrity when PI is not in first bytes")
Reported-by: David Wei <dw@davidwei.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Quirk is needed to enable headset microphone on missing pin 0x19.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029151653.80726-2-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Quirk is needed to enable headset microphone on missing pin 0x19.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029151653.80726-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
The biggest set of changes here is Hans' fixes and quirks for various
Baytrail based platforms with RT5640 CODECs, and there's one core fix
for a missed length assignment for __counted_by() checking. Otherwise
it's small device specific fixes, several of them in the DT bindings.
|
|
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
eth_header+0x38/0x1f0 net/ethernet/eth.c:83
dev_hard_header include/linux/netdevice.h:3208 [inline]
nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358
nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:277 [inline]
br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424
__netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562
__netif_receive_skb_one_core net/core/dev.c:5666 [inline]
__netif_receive_skb+0x12f/0x650 net/core/dev.c:5781
netif_receive_skb_internal net/core/dev.c:5867 [inline]
netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926
tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550
tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xa6d/0xc90 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdbeeb7d1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48
RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff
RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8
RBP: 00007fdbeebf12be R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000008e R11: 0000000000000293 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fdbeed36058 R15: 00007ffc38de06e8
</TASK>
Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
<TASK>
get_info+0x128/0x180
do_ip6t_get_ctl+0x6a/0x430
nf_getsockopt+0x46/0x80
ipv6_getsockopt+0xb9/0x100
rawv6_getsockopt+0x42/0x190
do_sock_getsockopt+0xaa/0x180
__sys_getsockopt+0x70/0xc0
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0xa2/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it.
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
err is never used, remove it.
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Directly return the error from xfs_bmap_longest_free_extent instead
of breaking from the loop and handling it there, and use a done
label to directly jump to the exist when we found a suitable perag
structure to reduce the indentation level and pag/max_pag check
complexity in the tail of the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
