summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-02octeontx2-af: Add validation before accessing cgx and lmacHariprasad Kelam
with the addition of new MAC blocks like CN10K RPM and CN10KB RPM_USX, LMACs are noncontiguous and CGX blocks are also noncontiguous. But during RVU driver initialization, the driver is assuming they are contiguous and trying to access cgx or lmac with their id which is resulting in kernel panic. This patch fixes the issue by adding proper checks. [ 23.219150] pc : cgx_lmac_read+0x38/0x70 [ 23.219154] lr : rvu_program_channels+0x3f0/0x498 [ 23.223852] sp : ffff000100d6fc80 [ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27: 000000000000005a [ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24: fffffffffff0f000 Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-02octeontx2-af: Fix mapping for NIX block from CGX connectionHariprasad Kelam
Firmware configures NIX block mapping for all MAC blocks. The current implementation reads the configuration and creates the mapping between RVU PF and NIX blocks. But this configuration is only valid for silicons that support multiple blocks. For all other silicons, all MAC blocks map to NIX0. This patch corrects the mapping by adding a check for the same. Fixes: c5a73b632b90 ("octeontx2-af: Map NIX block from CGX connection") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-02octeontx2-af: cn10kb: fix interrupt csr addressesHariprasad Kelam
The current design is that, for asynchronous events like link_up and link_down firmware raises the interrupt to kernel. The previous patch which added RPM_USX driver has a bug where it uses old csr addresses for configuring interrupts. Which is resulting in losing interrupts from source firmware. This patch fixes the issue by correcting csr addresses. Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-02nvme-tcp: Fix comma-related oopsDavid Howells
Fix a comma that should be a semicolon. The comma is at the end of an if-body and thus makes the statement after (a bvec_set_page()) conditional too, resulting in an oops because we didn't fill out the bio_vec[]: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp] RIP: 0010:skb_splice_from_iter+0xf1/0x370 ... Call Trace: tcp_sendmsg_locked+0x3a6/0xdd0 tcp_sendmsg+0x31/0x50 inet_sendmsg+0x47/0x80 sock_sendmsg+0x99/0xb0 nvme_tcp_try_send_data+0x149/0x490 [nvme_tcp] nvme_tcp_try_send+0x1b7/0x300 [nvme_tcp] nvme_tcp_io_work+0x40/0xc0 [nvme_tcp] process_one_work+0x21c/0x430 worker_thread+0x54/0x3e0 kthread+0xf8/0x130 Fixes: 7769887817c3 ("nvme-tcp: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage") Reported-by: Aurelien Aptel <aaptel@nvidia.com> Link: https://lore.kernel.org/r/253mt0il43o.fsf@mtr-vdi-124.i-did-not-set--mail-host-address--so-tickle-me/ Signed-off-by: David Howells <dhowells@redhat.com> cc: Sagi Grimberg <sagi@grimberg.me> cc: Willem de Bruijn <willemb@google.com> cc: Keith Busch <kbusch@kernel.org> cc: Jens Axboe <axboe@fb.com> cc: Christoph Hellwig <hch@lst.de> cc: Chaitanya Kulkarni <kch@nvidia.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-nvme@lists.infradead.org cc: netdev@vger.kernel.org Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-02fs: move cleanup from init_file() into its callersAmir Goldstein
The use of file_free_rcu() in init_file() to free the struct that was allocated by the caller was hacky and we got what we deserved. Let init_file() and its callers take care of cleaning up each after their own allocated resources on error. Fixes: 62d53c4a1dfe ("fs: use backing_file container for internal files with "fake" f_path") # mainline only Reported-and-tested-by: syzbot+ada42aab05cf51b00e98@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Message-Id: <20230701171134.239409-1-amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-07-01Merge tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky update from Guo Ren: - Correct thread.trap_no restore of uprobe * tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux: csky: uprobes: Restore thread.trap_no
2023-07-01perf evsel amd: Fix IBS error messageRavi Bangoria
AMD IBS can do per-process profiling[1] and is no longer restricted to per-cpu or systemwide only. Remove stale error message. Also, checking just exclude_kernel is not sufficient since IBS does not support any privilege filters. So include all exclude_* checks. And finally, move these checks under tools/perf/arch/x86/ from generic code. Before: $ sudo ./perf record -e ibs_op//k -C 0 Error: AMD IBS may only be available in system-wide/per-cpu mode. Try using -a, or -C and workload affinity After: $ sudo ./perf record -e ibs_op//k -C 0 Error: AMD IBS doesn't support privilege filtering. Try again without the privilege modifiers (like 'k') at the end. [1] https://git.kernel.org/torvalds/c/30093056f7b2 Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: ananth.narayan@amd.com Cc: sandipan.das@amd.com Cc: santosh.shukla@amd.com Cc: irogers@google.com Cc: peterz@infradead.org Cc: adrian.hunter@intel.com Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lore.kernel.org/r/20230630085230.437-1-ravi.bangoria@amd.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01Merge tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Stable fixes and other bugfixes: - nfs: don't report STATX_BTIME in ->getattr - Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return' since it breaks NFSv4 state recovery. - NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION - Fix the NFSv4.2 xattr cache shrinker_id - Force a ctime update after a NFSv4.2 SETXATTR call Features and cleanups: - NFS and RPC over TLS client code from Chuck Lever - Support for use of abstract unix socket addresses with the rpcbind daemon - Sysfs API to allow shutdown of the kernel RPC client and prevent umount() hangs if the server is known to be permanently down - XDR cleanups from Anna" * tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits) Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return" NFS: Don't cleanup sysfs superblock entry if uninitialized nfs: don't report STATX_BTIME in ->getattr NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION NFSv4.2: fix wrong shrinker_id NFSv4: Clean up some shutdown loops NFS: Cancel all existing RPC tasks when shutdown NFS: add sysfs shutdown knob NFS: add a sysfs link to the acl rpc_client NFS: add a sysfs link to the lockd rpc_client NFS: Add sysfs links to sunrpc clients for nfs_clients NFS: add superblock sysfs entries NFS: Make all of /sys/fs/nfs network-namespace unique NFS: Open-code the nfs_kset kset_create_and_add() NFS: rename nfs_client_kobj to nfs_net_kobj NFS: rename nfs_client_kset to nfs_kset NFS: Add an "xprtsec=" NFS mount option NFS: Have struct nfs_client carry a TLS policy field SUNRPC: Add a TCP-with-TLS RPC transport class SUNRPC: Capture CMSG metadata on client-side receive ...
2023-07-01Merge tag 'x86-urgent-2023-07-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single regression fix for x86: Moving the invocation of arch_cpu_finalize_init() earlier in the boot process caused a boot regression on IBT enabled system. The root cause is not the move of arch_cpu_finalize_init() itself. The system fails to boot because the subsequent efi_enter_virtual_mode() code has a non-IBT safe EFI call inside. This was not noticed before because IBT was enabled after the EFI initialization. Switching the EFI call to use the IBT safe wrapper cures the problem" * tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Make efi_set_virtual_address_map IBT safe
2023-07-01perf: unwind: Fix symfs with libdwVincent Whitchurch
Pass the full path including the symfs (if any) to libdw. Without this unwinding fails with errors like this when a symfs is used: unwind: failed with 'No such file or directory'" Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: kernel@axis.com Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/r/20230630-perf-libdw-symfs-v2-1-469760dd4d5b@axis.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01perf symbol: Fix uninitialized return value in symbols__find_by_name()James Clark
found_idx and s aren't initialized, so if no symbol is found then the assert at the end will index off the end of the array causing a segfault. The function also doesn't return NULL when the symbol isn't found even if the assert passes. Fix it by initializing the values and only setting them when something is found. Fixes the following test failure: $ perf test 1 1: vmlinux symtab matches kallsyms : FAILED! Fixes: 259dce914e93 ("perf symbol: Remove symbol_name_rb_node") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/r/20230630153840.858668-1-james.clark@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01perf test: Test perf lock contention CSV outputNamhyung Kim
To verify CSV output, just check the number of separators (",") using the tr and wc commands like this. grep -v "^#" ${result} | tr -d -c | wc -c Now it expects 6 columns (and 5 separators) in the output, but it may be changed later so count the field in the header first and compare it to the actual output lines. $ cat ${result} # output: contended, total wait, max wait, avg wait, type, caller 1, 28787, 28787, 28787, spinlock, raw_spin_rq_lock_nested+0x1b The test looks like below now: $ sudo ./perf test -v contention 86: kernel lock contention analysis test : --- start --- test child forked, pid 2705822 Testing perf lock record and perf lock contention Testing perf lock contention --use-bpf Testing perf lock record and perf lock contention at the same time Testing perf lock contention --threads Testing perf lock contention --lock-addr Testing perf lock contention --type-filter (w/ spinlock) Testing perf lock contention --lock-filter (w/ tasklist_lock) Testing perf lock contention --callstack-filter (w/ unix_stream) Testing perf lock contention --callstack-filter with task aggregation Testing perf lock contention CSV output test child finished with 0 ---- end ---- kernel lock contention analysis test: Ok Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230628200141.2739587-5-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01perf lock contention: Add --output optionNamhyung Kim
To avoid formatting failures for example in CSV output due to debug messages, add --output option to put the result in a file. Unfortunately the short -o option was taken by the --owner already. $ sudo ./perf lock con -ab --output lock-out.txt -v sleep 1 Looking at the vmlinux_path (8 entries long) symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols $ head lock-out.txt contended total wait max wait avg wait type caller 3 76.79 us 26.89 us 25.60 us rwlock:R ep_poll_callback+0x2d 0xffffffff9a23f4b5 _raw_read_lock_irqsave+0x45 0xffffffff99bbd4dd ep_poll_callback+0x2d 0xffffffff999029f3 __wake_up_common+0x73 0xffffffff99902b82 __wake_up_common_lock+0x82 0xffffffff99fa5b1c sock_def_readable+0x3c 0xffffffff9a11521d unix_stream_sendmsg+0x18d 0xffffffff99f9fc9c sock_sendmsg+0x5c Suggested-by: Ian Rogers <irogers@google.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230628200141.2739587-4-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01perf lock contention: Add -x option for CSV style outputNamhyung Kim
Sometimes we want to process the output by external programs. Let's add the -x option to specify the field separator like perf stat. $ sudo ./perf lock con -ab -x, sleep 1 # output: contended, total wait, max wait, avg wait, type, caller 19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0 15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e 4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d 1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135 8, 67608, 27404, 8451, spinlock, __queue_work+0x174 3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff 3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248 2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad 1, 24619, 24619, 24619, spinlock, rcu_core+0xd4 The first line is a comment that shows the output format. Each line is separated by the given string ("," in this case). The time is printed in nsec without the unit so that it can be parsed easily. The characters can be used in the output like (":", "+" and ".") are not allowed for the -x option. $ ./perf lock con -x: Cannot use the separator that is already used Usage: perf lock contention [<options>] -x, --field-separator <separator> print result in CSV format with custom separator The stacktraces are printed in the same line separated by ":". The header is updated to show the stacktrace. Also the debug output is added at the end as a comment. $ sudo ./perf lock con -abv -x, -F wait_total sleep 1 Looking at the vmlinux_path (8 entries long) symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols # output: total wait, type, caller, stacktrace 37134, spinlock, rcu_core+0xd4, 0xffffffff9d0401e4 _raw_spin_lock_irqsave+0x44: 0xffffffff9c738114 rcu_core+0xd4: ... 21213, spinlock, raw_spin_rq_lock_nested+0x1b, 0xffffffff9d0407c0 _raw_spin_lock+0x30: 0xffffffff9c6d9cfb raw_spin_rq_lock_nested+0x1b: ... 20506, rwlock:W, ep_done_scan+0x2d, 0xffffffff9c9bc4dd ep_done_scan+0x2d: 0xffffffff9c9bd5f1 do_epoll_wait+0x6d1: ... 18044, rwlock:R, ep_poll_callback+0x2d, 0xffffffff9d040555 _raw_read_lock_irqsave+0x45: 0xffffffff9c9bc81d ep_poll_callback+0x2d: ... 17890, rwlock:W, do_epoll_wait+0x47b, 0xffffffff9c9bd39b do_epoll_wait+0x47b: 0xffffffff9c9be9ef __x64_sys_epoll_wait+0x6d1: ... 12114, spinlock, futex_wait_queue+0x60, 0xffffffff9d0407c0 _raw_spin_lock+0x30: 0xffffffff9d037cae __schedule+0xbe: ... # debug: total=7, bad=0, bad_task=0, bad_stack=0, bad_time=0, bad_data=0 Also note that some field (like lock symbols) can be empty. $ sudo ./perf lock con -abl -x, -E 10 sleep 1 # output: contended, total wait, max wait, avg wait, address, symbol, type 6, 275025, 61764, 45837, ffff9dcc9f7d60d0, , spinlock 18, 87716, 11196, 4873, ffff9dc540059000, , spinlock 2, 6472, 5499, 3236, ffff9dcc7f730e00, rq_lock, spinlock 3, 4429, 2341, 1476, ffff9dcc7f7b0e00, rq_lock, spinlock 3, 3974, 1635, 1324, ffff9dcc7f7f0e00, rq_lock, spinlock 4, 3290, 1326, 822, ffff9dc5f4e2cde0, , rwlock 3, 2894, 1023, 964, ffffffff9e0d7700, rcu_state, spinlock 1, 2567, 2567, 2567, ffff9dcc7f6b0e00, rq_lock, spinlock 4, 1259, 596, 314, ffff9dc69c2adde0, , rwlock 1, 934, 934, 934, ffff9dcc7f670e00, rq_lock, spinlock Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230628200141.2739587-3-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01perf lock: Remove stale commentsNamhyung Kim
The comment was for symbol_conf.sort_by_name which was deleted already. Let's get rid of the stale comments as well. Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230628200141.2739587-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-07-01Merge tag 'kbuild-v6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the deprecated rule to build *.dtbo from *.dts - Refactor section mismatch detection in modpost - Fix bogus ARM section mismatch detections - Fix error of 'make gtags' with O= option - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error with the latest LLVM version - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed - Ignore more compiler-generated symbols for kallsyms - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles - Enable more kernel-doc warnings with W=2 - Refactor <linux/export.h> by generating KSYMTAB data by modpost - Deprecate <asm/export.h> and <asm-generic/export.h> - Remove the EXPORT_DATA_SYMBOL macro - Move the check for static EXPORT_SYMBOL back to modpost, which makes the build faster - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm - Warn missing MODULE_DESCRIPTION when building modules with W=1 - Make 'make clean' robust against too long argument error - Exclude more objects from GCOV to fix CFI failures with GCOV - Allow 'make modules_install' to install modules.builtin and modules.builtin.modinfo even when CONFIG_MODULES is disabled - Include modules.builtin and modules.builtin.modinfo in the linux-image Debian package even when CONFIG_MODULES is disabled - Revive "Entering directory" logging for the latest Make version * tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits) modpost: define more R_ARM_* for old distributions kbuild: revive "Entering directory" for Make >= 4.4.1 kbuild: set correct abs_srctree and abs_objtree for package builds scripts/mksysmap: Ignore prefixed KCFI symbols kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb kbuild: builddeb: always make modules_install, to install modules.builtin* modpost: continue even with unknown relocation type modpost: factor out Elf_Sym pointer calculation to section_rel() modpost: factor out inst location calculation to section_rel() kbuild: Disable GCOV for *.mod.o kbuild: Fix CFI failures with GCOV kbuild: make clean rule robust against too long argument error script: modpost: emit a warning when the description is missing kbuild: make modules_install copy modules.builtin(.modinfo) linux/export.h: rename 'sec' argument to 'license' modpost: show offset from symbol for section mismatch warnings modpost: merge two similar section mismatch warnings kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion modpost: use null string instead of NULL pointer for default namespace modpost: squash sym_update_namespace() into sym_add_exported() ...
2023-07-01Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix memory corruption (overwriting the kmalloc redzone) when saving the SVE state while in SVE streaming mode" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
2023-07-01Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds
Pull CXL updates from Dan Williams: "The highlights in terms of new functionality are support for the standard CXL Performance Monitor definition that appeared in CXL 3.0, support for device sanitization (wiping all data from a device), secure-erase (re-keying encryption of user data), and support for firmware update. The firmware update support is notable as it reuses the simple sysfs_upload interface to just cat(1) a blob to a sysfs file and pipe that to the device. Additionally there are a substantial number of cleanups and reorganizations to get ready for RCH error handling (RCH == Restricted CXL Host == current shipping hardware generation / pre CXL-2.0 topologies) and type-2 (accelerator / vendor specific) devices. For vendor specific devices they implement a subset of what the generic type-3 (generic memory expander) driver expects. As a result the rework decouples optional infrastructure from the core driver context. For RCH topologies, where the specification working group did not want to confuse pre-CXL-aware operating systems, many of the standard registers are hidden which makes support standard bus features like AER (PCIe Advanced Error Reporting) difficult. The rework arranges for the driver to help the PCI-AER core. Bjorn is on board with this direction but a late regression disocvery means the completion of this functionality needs to cook a bit longer, so it is code reorganizations only for now. Summary: - Add infrastructure for supporting background commands along with support for device sanitization and firmware update - Introduce a CXL performance monitoring unit driver based on the common definition in the specification. - Land some preparatory cleanup and refactoring for the anticipated arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1 topology) error handling. - Rework CPU cache management with respect to region configuration (device hotplug or other dynamic changes to memory interleaving) - Fix region reconfiguration vs CXL decoder ordering rules" * tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits) cxl: Fix one kernel-doc comment cxl/pci: Use correct flag for sanitize polling docs: perf: Minimal introduction the the CXL PMU device and driver perf: CXL Performance Monitoring Unit driver tools/testing/cxl: add firmware update emulation to CXL memdevs tools/testing/cxl: Use named effects for the Command Effect Log tools/testing/cxl: Fix command effects for inject/clear poison cxl: add a firmware update mechanism using the sysfs firmware loader cxl/test: Add Secure Erase opcode support cxl/mem: Support Secure Erase cxl/test: Add Sanitize opcode support cxl/mem: Wire up Sanitization support cxl/mbox: Add sanitization handling machinery cxl/mem: Introduce security state sysfs file cxl/mbox: Allow for IRQ_NONE case in the isr Revert "cxl/port: Enable the HDM decoder capability for switch ports" cxl/memdev: Formalize endpoint port linkage cxl/pci: Unconditionally unmask 256B Flit errors cxl/region: Manage decoder target_type at decoder-attach time cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM ...
2023-07-01Merge tag 'libnvdimm-for-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm and DAX updates from Vishal Verma: "This is mostly small cleanups and fixes, with the biggest change being the change to the DAX fault handler allowing it to return VM_FAULT_HWPOISON. Summary: - DAX fixes and cleanups including a use after free, extra references, and device unregistration, and a redundant variable. - Allow the DAX fault handler to return VM_FAULT_HWPOISON - A few libnvdimm cleanups such as making some functions and variables static where sufficient. - Add a few missing prototypes for wrapped functions in tools/testing/nvdimm" * tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: enable dax fault handler to report VM_FAULT_HWPOISON nvdimm: make security_show static nvdimm: make nd_class variable static dax/kmem: Pass valid argument to memory_group_register_static fsdax: remove redundant variable 'error' dax: Cleanup extra dax_region references dax: Introduce alloc_dev_dax_id() dax: Use device_unregister() in unregister_dax_mapping() dax: Fix dax_mapping_release() use after free tools/testing/nvdimm: Drop empty platform remove function libnvdimm: mark 'security_show' static again testing: nvdimm: add missing prototypes for wrapped functions dax: fix missing-prototype warnings
2023-07-01Merge tag 'sysctl-fixes-v2-v6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull another sysctl fix from Luis Chamberlain: "Just one minor nit I forgot to merge" * tag 'sysctl-fixes-v2-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: set variable sysctl_mount_point storage-class-specifier to static
2023-07-01Merge tag 'flex-array-transformations-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array update from Gustavo Silva: "Transform a zero-length array into a C99 flexible-array member. This addresses a build failure with Clang by fixing multiple '-Warray-bounds' warnings in drivers/staging/ks7010/ks_wlan_net.c" * tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: uapi: wireless: Replace zero-length array with flexible-array member
2023-07-01pid: use struct_size_t() helperChristian Brauner
Before commit d67790ddf021 ("overflow: Add struct_size_t() helper") only struct_size() existed, which expects a valid pointer instance containing the flexible array. However, when we determine the default struct pid allocation size for the associated kmem cache of a pid namespace we need to take the nesting depth of the pid namespace into account without an variable instance necessarily being available. In commit b69f0aeb0689 ("pid: Replace struct pid 1-element array with flex-array") we used to handle this the old fashioned way and cast NULL to a struct pid pointer type. However, we do apparently have a dedicated struct_size_t() helper for exactly this case. So switch to that. Suggested-by: Kees Cook <keescook@chromium.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-01mm: Update do_vmi_align_munmap() return semanticsLiam R. Howlett
Since do_vmi_align_munmap() will always honor the downgrade request on the success, the callers no longer have to deal with confusing return codes. Since all callers that request downgrade actually want the lock to be dropped, change the downgrade to an unlock request. Note that the lock still needs to be held in read mode during the page table clean up to avoid races with a map request. Update do_vmi_align_munmap() to return 0 for success. Clean up the callers and comments to always expect the unlock to be honored on the success path. The error path will always leave the lock untouched. As part of the cleanup, the wrapper function do_vmi_munmap() and callers to the wrapper are also updated. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/linux-mm/20230629191414.1215929-1-willy@infradead.org/ Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-01mm: Always downgrade mmap_lock if requestedMatthew Wilcox (Oracle)
Now that stack growth must always hold the mmap_lock for write, we can always downgrade the mmap_lock to read and safely unmap pages from the page table, even if we're next to a stack. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-01xtensa: fix lock_mm_and_find_vma in case VMA not foundMax Filippov
MMU version of lock_mm_and_find_vma releases the mm lock before returning when VMA is not found. Do the same in noMMU version. This fixes hang on an attempt to handle protection fault. Fixes: d85a143b69ab ("xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-01selftests: Test RISC-V Vector's first-use handlerAndy Chiu
This add a test to check if the kernel zero-initializes all V registers after the first-use trap handler returns. If V registers are not zero-initialized, then the test should fail one out of several runs: ``` root@sifive-fpga:~# ./v_initval_nolibc # vl = 256 not ok 1 detect stale values on v-regesters 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4c 41 4e 47 3d 43 0 50 41 54 48 3d 2f 75 73 72 2f 6c 6f 63 61 6c 2f 73 62 69 6e 3a 2f 75 73 72 2f 6c 6f 63 61 6c 2f 62 69 6e 3a 2f 75 73 72 ff ff 81 0 0 0 0 0 0 0 0 0 0 0 0 0 ``` Otherwise, the test passes without errors each run. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230627015556.12329-3-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01riscv: vector: clear V-reg in the first-use trapAndy Chiu
If there is no context switch happens after we enable V for a process, then we return to user space with whatever left on the CPU's V registers accessible to the process. The leaked data could belong to another process's V-context saved from last context switch, impacting process's confidentiality on the system. To prevent this from happening, we clear V registers by restoring zero'd V context after turining on V. Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230627015556.12329-2-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01riscv: vector: only enable interrupts in the first-use trapAndy Chiu
The function irqentry_exit_to_user_mode() must be called with interrupt disabled. The caller of do_trap_insn_illegal() also assumes running without interrupts. So, we should turn off interrupts after riscv_v_first_use_handler() returns. Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230625155416.18629-1-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01Merge patch series "riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION"Palmer Dabbelt
Jisheng Zhang <jszhang@kernel.org> says: When trying to run linux with various opensource riscv core on resource limited FPGA platforms, for example, those FPGAs with less than 16MB SDRAM, I want to save mem as much as possible. One of the major technologies is kernel size optimizations, I found that riscv does not currently support HAVE_LD_DEAD_CODE_DATA_ELIMINATION, which passes -fdata-sections, -ffunction-sections to CFLAGS and passes the --gc-sections flag to the linker. This not only benefits my case on FPGA but also benefits defconfigs. Here are some notable improvements from enabling this with defconfigs: nommu_k210_defconfig: text data bss dec hex 1112009 410288 59837 1582134 182436 before 962838 376656 51285 1390779 1538bb after rv32_defconfig: text data bss dec hex 8804455 2816544 290577 11911576 b5c198 before 8692295 2779872 288977 11761144 b375f8 after defconfig: text data bss dec hex 9438267 3391332 485333 13314932 cb2b74 before 9285914 3350052 483349 13119315 c82f53 after patch1 and patch2 are clean ups. patch3 fixes a typo. patch4 finally enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for riscv. * b4-shazam-merge: riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION vmlinux.lds.h: use correct .init.data.* section name riscv: vmlinux-xip.lds.S: remove .alternative section riscv: move options to keep entries sorted riscv: Fix orphan section warnings caused by kernel/pi Link: https://lore.kernel.org/r/20230523165502.2592-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01RISC-V: Fix up some vector state related build failuresPalmer Dabbelt
I get a few build failures along the lines of ./arch/riscv/include/uapi/asm/sigcontext.h:19:36: error: field ‘v_state’ has incomplete type 19 | struct __riscv_v_ext_state v_state; | ^~~~~~~ ./arch/riscv/include/uapi/asm/sigcontext.h:32:49: error: field ‘sc_extdesc’ has incomplete type 32 | struct __riscv_extra_ext_header sc_extdesc; The V structures in question are defined for !assembly, so let's just do so for the others. Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230619172101.18692-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01RISC-V: Document that V registers are clobbered on syscallsPalmer Dabbelt
This is included in the ISA manual, but it's pretty common for bits of the ISA manual that are actually ABI to change. So let's document it explicitly. Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230619190142.26498-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-01docs: networking: Update codeaurora references for rmnetSubash Abhinov Kasiviswanathan
source.codeaurora.org is no longer accessible and so the reference link in the documentation is not useful. Use iproute2 instead as it has a rmnet module for configuration. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-01docs: netdev: broaden mailbot to all MAINTAINERSJakub Kicinski
Reword slightly now that all MAINTAINERS have access to the commands. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-01net: usb: cdc_ether: add u-blox 0x1313 composition.Davide Tronchin
Add CDC-ECM support for LARA-R6 01B. The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 configurations (default, RmNet, ECM) are the same. In CDC-ECM mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-01Merge tag 'kvm-x86-vmx-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM VMX changes for 6.5: - Fix missing/incorrect #GP checks on ENCLS - Use standard mmu_notifier hooks for handling APIC access page - Misc cleanups
2023-07-01Merge tag 'kvm-x86-svm-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM SVM changes for 6.5: - Drop manual TR/TSS load after VM-Exit now that KVM uses VMLOAD for host state - Fix a not-yet-problematic missing call to trace_kvm_exit() for VM-Exits that are handled in the fastpath - Print more descriptive information about the status of SEV and SEV-ES during module load - Assert that misc_cg_set_capacity() doesn't fail to avoid should-be-impossible memory leaks
2023-07-01Merge tag 'kvm-x86-selftests-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM selftests changes for 6.5: - Add a test for splitting and reconstituting hugepages during and after dirty logging - Add support for CPU pinning in demand paging test - Generate dependency files so that partial rebuilds work as expected - Misc cleanups and fixes
2023-07-01Merge tag 'kvm-x86-pmu-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86/pmu changes for 6.5: - Add support for AMD PerfMonV2, with a variety of cleanups and minor fixes included along the way
2023-07-01Merge tag 'kvm-x86-mmu-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86/mmu changes for 6.5: - Add back a comment about the subtle side effect of try_cmpxchg64() in tdp_mmu_set_spte_atomic() - Add an assertion in __kvm_mmu_invalidate_addr() to verify that the target KVM MMU is the current MMU - Add a "never" option to effectively avoid creating NX hugepage recovery threads
2023-07-01Merge tag 'kvm-x86-misc-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86 changes for 6.5: * Move handling of PAT out of MTRR code and dedup SVM+VMX code * Fix output of PIC poll command emulation when there's an interrupt * Add a maintainer's handbook to document KVM x86 processes, preferred coding style, testing expectations, etc. * Misc cleanups
2023-07-01Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
Common KVM changes for 6.5: - Fix unprotected vcpu->pid dereference via debugfs - Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals - Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code - Misc cleanups
2023-07-01Merge tag 'kvmarm-6.5' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.5 - Eager page splitting optimization for dirty logging, optionally allowing for a VM to avoid the cost of block splitting in the stage-2 fault path. - Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with services that live in the Secure world. pKVM intervenes on FF-A calls to guarantee the host doesn't misuse memory donated to the hyp or a pKVM guest. - Support for running the split hypervisor with VHE enabled, known as 'hVHE' mode. This is extremely useful for testing the split hypervisor on VHE-only systems, and paves the way for new use cases that depend on having two TTBRs available at EL2. - Generalized framework for configurable ID registers from userspace. KVM/arm64 currently prevents arbitrary CPU feature set configuration from userspace, but the intent is to relax this limitation and allow userspace to select a feature set consistent with the CPU. - Enable the use of Branch Target Identification (FEAT_BTI) in the hypervisor. - Use a separate set of pointer authentication keys for the hypervisor when running in protected mode, as the host is untrusted at runtime. - Ensure timer IRQs are consistently released in the init failure paths. - Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps (FEAT_EVT), as it is a register commonly read from userspace. - Erratum workaround for the upcoming AmpereOne part, which has broken hardware A/D state management. As a consequence of the hVHE series reworking the arm64 software features framework, the for-next/module-alloc branch from the arm64 tree comes along for the ride.
2023-07-01Merge tag 'kvm-riscv-6.5-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 6.5 - Redirect AMO load/store misaligned traps to KVM guest - Trap-n-emulate AIA in-kernel irqchip for KVM guest - Svnapot support for KVM Guest
2023-07-01Merge tag 'kvm-s390-next-6.5-1' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD * New uvdevice secret API * New CMM selftest * cmm fix * diag 9c racy access of target cpu fix
2023-07-01smb: client: remove redundant pointer 'server'Colin Ian King
The pointer 'server' is assigned but never read, the pointer is redundant and can be removed. Cleans up clang scan build warning: fs/smb/client/dfs.c:217:3: warning: Value stored to 'server' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-01cifs: fix session state transition to avoid use-after-free issueWinston Wen
We switch session state to SES_EXITING without cifs_tcp_ses_lock now, it may lead to potential use-after-free issue. Consider the following execution processes: Thread 1: __cifs_put_smb_ses() spin_lock(&cifs_tcp_ses_lock) if (--ses->ses_count > 0) spin_unlock(&cifs_tcp_ses_lock) return spin_unlock(&cifs_tcp_ses_lock) ---> **GAP** spin_lock(&ses->ses_lock) if (ses->ses_status == SES_GOOD) ses->ses_status = SES_EXITING spin_unlock(&ses->ses_lock) Thread 2: cifs_find_smb_ses() spin_lock(&cifs_tcp_ses_lock) list_for_each_entry(ses, ...) spin_lock(&ses->ses_lock) if (ses->ses_status == SES_EXITING) spin_unlock(&ses->ses_lock) continue ... spin_unlock(&ses->ses_lock) if (ret) cifs_smb_ses_inc_refcount(ret) spin_unlock(&cifs_tcp_ses_lock) If thread 1 is preempted in the gap and thread 2 start executing, thread 2 will get the session, and soon thread 1 will switch the session state to SES_EXITING and start releasing it, even though thread 1 had increased the session's refcount and still uses it. So switch session state under cifs_tcp_ses_lock to eliminate this gap. Signed-off-by: Winston Wen <wentao@uniontech.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-06-30Merge tag '6.5-rc-smb3-client-fixes-part1' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull smb client updates from Steve French: - Deferred close fix - Debugging improvements: display missing mount option, dump rc on invalidate inode failures, print client_guid in DebugData, log session id when matching session not found in reconnect, new dynamic tracepoint for session not found - Mount fixes including: potential null dereference, and possible memory leak and path name parsing when double slashes - Fix potential use after free in compounding - Two crediting (flow control) fixes: fix for crediting leak (stress scenario with excess lease credits) and better locking around updating credits - Three cleanups from issues pointed out by the kernel test robot - Session state check improvements (including for potential use after free) - DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS mounts to same share with different prefix paths, DFS mount error checking improvement * tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: cifs: new dynamic tracepoint to track ses not found errors cifs: log session id when a matching ses is not found smb: client: improve DFS mount check smb: client: fix shared DFS root mounts with different prefixes smb: client: fix parsing of source mount option smb: client: fix broken file attrs with nodfs mounts cifs: print client_guid in DebugData cifs: fix session state check in smb2_find_smb_ses cifs: fix session state check in reconnect to avoid use-after-free issue cifs: do all necessary checks for credits within or before locking cifs: prevent use-after-free by freeing the cfile later smb: client: fix warning in generic_ip_connect() smb: client: fix warning in CIFSFindNext() smb: client: fix warning in CIFSFindFirst() smb3: do not reserve too many oplock credits cifs: print more detail when invalidate_inode_mapping fails smb: client: fix warning in cifs_smb3_do_mount() smb: client: fix warning in cifs_match_super() cifs: print nosharesock value while dumping mount options SMB3: Do not send lease break acknowledgment if all file handles have been closed
2023-06-30Merge tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd server updates from Steve French: - two fixes for compounding bugs (make sure no out of bound reads with less common combinations of commands in the compound) - eight minor cleanup patches (e.g. simplifying return values, replace one element array, use of kzalloc where simpler) - fix for clang warning on possible overflow in filename conversion * tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd: ksmbd: avoid field overflow warning ksmbd: Replace one-element array with flexible-array member ksmbd: Use struct_size() helper in ksmbd_negotiate_smb_dialect() ksmbd: add missing compound request handing in some commands ksmbd: fix out of bounds read in smb2_sess_setup ksmbd: Replace the ternary conditional operator with min() ksmbd: use kvzalloc instead of kvmalloc ksmbd: Change the return value of ksmbd_vfs_query_maximal_access to void ksmbd: return a literal instead of 'err' in ksmbd_vfs_kern_path_locked() ksmbd: use kzalloc() instead of __GFP_ZERO ksmbd: remove unused ksmbd_tree_conn_share function
2023-06-30Merge tag 'nfsd-6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix ordering of attributes in NFSv4 GETATTR replies * tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: Fix creation time serialization order
2023-06-30Merge tag 'livepatching-for-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - Make a variable static to fix a sparse warning * tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Make 'klp_stack_entries' static
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 04:38:42 +0000