summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-23drm/bridge: anx7625: Prevent endless probe loopNícolas F. R. A. Prado
During probe, the driver registers i2c dummy devices and populates the aux bus, which registers a device for the panel. After doing that, the driver can still defer probe if needed. This ordering of operations is troublesome however, because the deferred probe work will retry probing all pending devices every time a new device is registered. Therefore, if modules need to be loaded in order to satisfy the dependencies for this driver to complete probe, the kernel will stall, since it'll keep trying to probe the anx7625 driver, but never succeed, given that modules would only be loaded after the deferred probe work completes. Two changes are required to avoid this issue: * Move of_find_mipi_dsi_host_by_node(), which can defer probe, to before anx7625_register_i2c_dummy_clients() and devm_of_dp_aux_populate_ep_devices(), which register devices. * Make use of the done_probing callback when populating the aux bus, so that the bridge registration is only done after the panel is probed. This is required because the panel might need to defer probe, but the aux bus population needs the i2c dummy devices working, so this call couldn't just be moved to an earlier point in probe. One caveat is that if the panel is described outside the aux bus, the probe loop issue can still happen, but we don't have a way to avoid it in that case since there's no callback available. With this patch applied, it's possible to boot on mt8192-asurada-spherion with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=m CONFIG_BACKLIGHT_PWM=y and also with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=y CONFIG_BACKLIGHT_PWM=m Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel") Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230518193902.891121-1-nfraprado@collabora.com
2023-05-23drm/msm: Use struct fb_info.screen_bufferThomas Zimmermann
The fbdev framebuffer is in system memory. Store the address in the field 'screen_buffer'. Fixes the following sparse warning. ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: warning: incorrect type in assignment (different address spaces) ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: expected char [noderef] __iomem *screen_base ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: got void * Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522191701.13406-1-tzimmermann@suse.de
2023-05-23drm/gma500: Clear fbdev framebuffer with fb_memset_io()Thomas Zimmermann
The fbdev framebuffer is I/O memory, so clear it with fb_memset_io(). Fixes the following sparse warning: ../drivers/gpu/drm/gma500/fbdev.c:234:20: warning: incorrect type in argument 1 (different address spaces) ../drivers/gpu/drm/gma500/fbdev.c:234:20: expected void *s ../drivers/gpu/drm/gma500/fbdev.c:234:20: got char [noderef] __iomem *screen_base Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522190637.7039-1-tzimmermann@suse.de
2023-05-23drm/i915/mtl: end support for set caching ioctlFei Yang
The design is to keep Buffer Object's caching policy immutable through out its life cycle. This patch ends the support for set caching ioctl from MTL onward. While doing that we also set BO's to be 1-way coherent at creation time because GPU is no longer automatically snooping CPU cache. For userspace components needing to fine tune the caching policy for BO's, a follow up patch will extend the GEM_CREATE uAPI to allow them specify caching mode at BO creation time. Signed-off-by: Fei Yang <fei.yang@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519051103.3404990-2-fei.yang@intel.com
2023-05-22drm/i915/pmu: Export counters from all tilesTvrtko Ursulin
Start exporting frequency and RC6 counters from all tiles. Existing counters keep their names and config values and new one use the namespace added in the previous patch, with the "-gtN" added to their names. Interrupts counter is an odd one off. Because it is the global device counters (not only GT) we choose not to add per tile versions for now. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-8-umesh.nerlige.ramappa@intel.com
2023-05-22drm/i915/pmu: Prepare for multi-tile non-engine countersTvrtko Ursulin
Reserve some bits in the counter config namespace which will carry the tile id and prepare the code to handle this. No per tile counters have been added yet. v2: - Fix checkpatch issues - Use 4 bits for gt id in non-engine counters. Drop FIXME. - Set MAX GTs to 4. Drop FIXME. v3: (Ashutosh, Tvrtko) - Drop BUG_ON that would never fire - Make enable u64 - Pull in some code from next patch v4: Set I915_PMU_MAX_GTS to 2 (Tvrtko) v5: s/u64/u32 where needed (Ashutosh) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-7-umesh.nerlige.ramappa@intel.com
2023-05-22drm/i915/pmu: Add reference counting to the sampling timerTvrtko Ursulin
We do not want to have timers per tile and waste CPU cycles and energy via multiple wake-up sources, for a relatively un-important task of PMU sampling, so keeping a single timer works well. But we also do not want the first GT which goes idle to turn off the timer. Add some reference counting, via a mask of unparked GTs, to solve this. v2: Drop the check for unparked in i915_sample (Ashutosh) v3: Revert v2 (Tvrtko) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-6-umesh.nerlige.ramappa@intel.com
2023-05-22drm/i915/pmu: Transform PMU parking code to be GT basedTvrtko Ursulin
Trivial prep work for full multi-tile enablement later. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-5-umesh.nerlige.ramappa@intel.com
2023-05-22drm/i915/pmu: Skip sampling engines with no enabled countersTvrtko Ursulin
As we have more and more engines do not waste time sampling the ones no- one is monitoring. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-4-umesh.nerlige.ramappa@intel.com
2023-05-22drm/i915/pmu: Support PMU for all enginesTvrtko Ursulin
Given how the metrics are already exported, we also need to run sampling over engines from all GTs. Problem of GT frequencies is left for later. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-3-umesh.nerlige.ramappa@intel.com
2023-05-22drm/i915/pmu: Change bitmask of enabled events to u32Tvrtko Ursulin
Having it as u64 was a confusing (but harmless) mistake. Also add some asserts to make sure the internal field does not overflow in the future. v2: Fix WARN_ON firing for INTERRUPT event (Umesh) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-2-umesh.nerlige.ramappa@intel.com
2023-05-22drm/nouveau/acr/ga102: set variable ga102_gsps storage-class-specifier to staticTom Rix
smatch reports drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c:49:1: warning: symbol 'ga102_gsps' was not declared. Should it be static? This variable is only used in its defining file, so it should be static Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517133112.873856-1-trix@redhat.com
2023-05-22drm/nouveau: constify pointers to hwmon_channel_infoKrzysztof Kozlowski
Statically allocated array of pointers to hwmon_channel_info can be made const for safety. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511175443.281970-1-krzysztof.kozlowski@linaro.org
2023-05-22drm/nouveau: dispnv50: fix missing-prototypes warningArnd Bergmann
nv50_display_create() is declared in another header, along with a couple of declarations that are now outdated: drivers/gpu/drm/nouveau/dispnv50/disp.c:2517:1: error: no previous prototype for 'nv50_display_create' Fixes: ba801ef068c1 ("drm/nouveau/kms: display destroy/init/fini hooks can be static") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230417210329.2469722-1-arnd@kernel.org
2023-05-22drm: bridge: samsung-dsim: Implement support for clock/data polarity swapMarek Vasut
Implement support for DSI clock and data lane DN/DP polarity swap by means of decoding 'lane-polarities' DT property. The controller does support DN/DP swap of clock lane and all data lanes, the controller does not support polarity swap of individual data lane bundles, add a check which verifies all data lanes have the same polarity. This has been validated on an imx8mm board that actually has the MIPI DSI clock lanes inverted. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230514114625.98372-2-festevam@gmail.com
2023-05-22dt-bindings: samsung,mipi-dsim: Add 'lane-polarities'Fabio Estevam
The Samsung DSIM IP block allows the inversion of the clock and data lanes. Add an optional property called 'lane-polarities' that describes the polarities of the MIPI DSI clock and data lanes. This property is useful for properly describing the hardware when the board designer decided to switch the polarities of the MIPI DSI clock and/or data lanes. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230514114625.98372-1-festevam@gmail.com
2023-05-22MAINTAINERS: Add entry for Samsung S6D7AA0 LCD panel controller driverArtur Weber
Add myself as maintainer of the Samsung S6D7AA0 panel driver. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-4-aweber.kernel@gmail.com
2023-05-22drm/panel: Add Samsung S6D7AA0 panel controller driverArtur Weber
Initial driver for S6D7AA0-controlled panels. Currently, the following panels are supported: - S6D7AA0-LSL080AL02 (Samsung Galaxy Tab 3 8.0) - S6D7AA0-LSL080AL03 (Samsung Galaxy Tab A 8.0 2015) - S6D7AA0-LTL101AT01 (Samsung Galaxy Tab A 9.7 2015) It should be possible to extend this driver to work with other panels using this IC. Tested-by: Nikita Travkin <nikita@trvn.ru> #ltl101at01 Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-3-aweber.kernel@gmail.com
2023-05-22dt-bindings: display: panel: Add Samsung S6D7AA0 LCD panel controllerArtur Weber
Add bindings for the S6D7AA0 LCD panel controller, including the S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family of tablets, and the S6D7AA0-LSL080AL03 and S6D7AA0-LTL101AT01 panels used in the Samsung Galaxy Tab A 8.0 and 9.7 2015. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-2-aweber.kernel@gmail.com
2023-05-19drm/i915: Fix memory leaks in function live_nop_switchCong Liu
Be sure to properly free the allocated memory before exiting the live_nop_switch function. Signed-off-by: Cong Liu <liucong2@kylinos.cn> Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517050204.4111874-1-liucong2@kylinos.cn
2023-05-19drm/sched: Rename to drm_sched_wakeup_if_can_queue()Luben Tuikov
Rename drm_sched_wakeup() to drm_sched_wakeup_if_canqueue() since the former is misleading, as it wakes up the GPU scheduler _only if_ more jobs can be queued to the underlying hardware. This distinction is important to make, since the wake conditional in the GPU scheduler thread wakes up when other conditions are also true, e.g. when there are jobs to be cleaned. For instance, a user might want to wake up the scheduler only because there are more jobs to clean, but whether we can queue more jobs is irrelevant. v2: Separate "canqueue" to "can_queue". (Alex D.) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-2-luben.tuikov@amd.com Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
2023-05-19drm/sched: Rename to drm_sched_can_queue()Luben Tuikov
Rename drm_sched_ready() to drm_sched_can_queue(). "ready" can mean many things and is thus meaningless in this context. Instead, rename to a name which precisely conveys what is being checked. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Link: https://lore.kernel.org/r/20230517233550.377847-1-luben.tuikov@amd.com
2023-05-19Merge tag 'drm-misc-next-2023-05-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.5: UAPI Changes: Cross-subsystem Changes: - arch: Consolidate <asm/fb.h> Core Changes: - aperture: Ignore firmware framebuffers with non-primary devices - fbdev: Use fbdev's I/O helpers - sysfs: Expose DRM connector ID - tests: More tests for drm_rect Driver Changes: - armada: Implement fbdev emulation as a client - bridge: - fsl-ldb: Support i.MX6SX - lt9211: Remove blanking packets - lt9611: Remove blanking packets - tc358768: Implement input bus formats reporting, fix various timings and clocks settings - ti-sn65dsi86: Implement wait_hpd_asserted - nouveau: Improve NULL pointer checks before dereference - panel: - nt36523: Support Lenovo J606F - st7703: Support Anbernic RG353V-V2 - new panels: InnoLux G070ACE-L01 - sun4i: Fix MIPI-DSI dotclock - vc4: RGB Range toggle property, BT601 and BT2020 support for HDMI - vkms: Convert to drmm helpers, Add reflection and rotation support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/2pxmxdzsk2ekjy6xvbpj67zrhtwvkkhfspuvdm5pfm5i54hed6@sooct7yq6z4w
2023-05-18drm/i915/mtl: Extend Wa_16014892111 to MTL A-stepRadhakrishna Sripada
Like DG2, MTL a-step hardware is subject to Wa_16014892111 which requires that any changes made to the DRAW_WATERMARK register be done via an INDIRECT_CTX batch buffer rather than through a regular context workaround. The bspec gives the same non-default recommended tuning value for DRAW_WATERMARK as DG2, so we can re-use the INDIRECT_CTX code to apply that tuning setting on A-step hardware. Application of the tuning setting on B-step and later does not need INDIRECT_CTX handling and is already done in mtl_ctx_workarounds_init() as usual. v2: Limit the WA for A-step v3: Update the commit message. v4: Reorder platform checks and update commit message. Bspec: 68331 Cc: Haridhar Kalvala <haridhar.kalvala@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517233111.297542-2-radhakrishna.sripada@intel.com
2023-05-18drm/i915/mtl: Add MTL performance tuning changesRadhakrishna Sripada
MTL reuses the tuning parameters for DG2. Extend the dg2 performance tuning parameters to MTL. v2: Add DRAW_WATERMARK tuning parameter. v3: Limit DRAW_WATERMARK tuning to non A0 step. v4: Reorder platform checks. Restrict Blend fill caching optimization to Render GT. v5: Move mtl tuning params to its own function Bspec: 68331 Cc: Haridhar Kalvala <haridhar.kalvala@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517233111.297542-1-radhakrishna.sripada@intel.com
2023-05-18drm/i915/mtl: do not enable render power-gating on MTLAndrzej Hajda
Multiple CI tests fails with forcewake ack timeouts if render power gating is enabled. BSpec 52698 states it should be 0 for MTL, but apparently this info is outdated. Anyway since the patch makes MTL pass basic tests added FIXME tag informing this is temporary workaround. v2: added FIXME tag Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4983 Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517-mtl_disable_render_pg-v2-1-0b51180a43f0@intel.com
2023-05-18fbdev: Rename fb_mem*() helpersThomas Zimmermann
Update the names of the fb_mem*() helpers to be consistent with their regular counterparts. Hence, fb_memset() now becomes fb_memset_io(), fb_memcpy_fromfb() now becomes fb_memcpy_fromio() and fb_memcpy_tofb() becomes fb_memcpy_toio(). No functional changes. v6: * update new file fb_io_fops.c Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-8-tzimmermann@suse.de
2023-05-18fbdev: Move framebuffer I/O helpers into <asm/fb.h>Thomas Zimmermann
Implement framebuffer I/O helpers, such as fb_read*() and fb_write*(), in the architecture's <asm/fb.h> header file or the generic one. The common case has been the use of regular I/O functions, such as __raw_readb() or memset_io(). A few architectures used plain system- memory reads and writes. Sparc used helpers for its SBus. The architectures that used special cases provide the same code in their __raw_*() I/O helpers. So the patch replaces this code with the __raw_*() functions and moves it to <asm-generic/fb.h> for all architectures. v8: * remove garbage after commit-message tags v6: * fix fb_readq()/fb_writeq() on 64-bit mips (kernel test robot) v5: * include <linux/io.h> in <asm-generic/fb>; fix s390 build v4: * ia64, loongarch, sparc64: add fb_mem*() to arch headers to keep current semantics (Arnd) v3: * implement all architectures with generic helpers * support reordering and native byte order (Geert, Arnd) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-7-tzimmermann@suse.de
2023-05-18fbdev: Include <linux/fb.h> instead of <asm/fb.h>Thomas Zimmermann
Replace include statements for <asm/fb.h> with <linux/fb.h>. Fixes the coding style: if a header is available in asm/ and linux/, it is preferable to include the header from linux/. This only affects a few source files, most of which already include <linux/fb.h>. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-6-tzimmermann@suse.de
2023-05-18fbdev: Include <linux/io.h> in various driversThomas Zimmermann
The code uses writel() and similar I/O-memory helpers. Include the header file to get the declarations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-5-tzimmermann@suse.de
2023-05-18ipu-v3: Include <linux/io.h>Thomas Zimmermann
The code uses readl() and writel(). Include the header file to get the declarations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-4-tzimmermann@suse.de
2023-05-18fbdev/matrox: Remove trailing whitespacesThomas Zimmermann
Fix coding style. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-3-tzimmermann@suse.de
2023-05-18fbdev/hitfb: Cast I/O offset to addressThomas Zimmermann
Cast I/O offsets to pointers to use them with I/O functions. The I/O functions expect pointers of type 'volatile void __iomem *', but the offsets are plain integers. Build warnings are ../drivers/video/fbdev/hitfb.c: In function 'hitfb_accel_wait': ../arch/x86/include/asm/hd64461.h:18:33: warning: passing argument 1 of 'fb_readw' makes pointer from integer without a cast [-Wint-conversion] 18 | #define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x)) | ^~~~~~~~~~~~~~~~~~~~~~ | | | unsigned int ../arch/x86/include/asm/hd64461.h:93:33: note: in expansion of macro 'HD64461_IO_OFFSET' 93 | #define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */ | ^~~~~~~~~~~~~~~~~ ../drivers/video/fbdev/hitfb.c:47:25: note: in expansion of macro 'HD64461_GRCFGR' 47 | while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ; | ^~~~~~~~~~~~~~ In file included from ../arch/x86/include/asm/fb.h:15, from ../include/linux/fb.h:19, from ../drivers/video/fbdev/hitfb.c:22: ../include/asm-generic/fb.h:52:57: note: expected 'const volatile void *' but argument is of type 'unsigned int' 52 | static inline u16 fb_readw(const volatile void __iomem *addr) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ This patch only fixes the build warnings. It's not clear if the I/O offsets can legally be passed to the I/O helpers. It was apparently broken in 2007 when custom inw()/outw() helpers got removed by commit 34a780a0afeb ("sh: hp6xx pata_platform support."). Fixing the driver would require setting the I/O base address. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305102136.eMjTSPwH-lkp@intel.com/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Artur Rojek <contact@artur-rojek.eu> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230512102444.5438-2-tzimmermann@suse.de
2023-05-17drm/i915/guc/slpc: Disable rps_boost debugfsVinay Belgaumkar
rps_boost debugfs shows host turbo related info. This is not valid when SLPC is enabled. guc_slpc_info already shows the number of boosts. Add num_waiters there as well and disable rps_boost when SLPC is enabled. v2: Replace Bug with Link to resolve checkpatch warning Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7632 Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230516154905.1048006-1-vinay.belgaumkar@intel.com
2023-05-17drm/bridge: tc358767: Switch to devm MIPI-DSI helpersAlexander Stein
DSI device registering and attaching needs to be undone upon deregistration. This fixes module unload/load. Fixes: bbfd3190b656 ("drm/bridge: tc358767: Add DSI-to-DPI mode support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230517122107.1766673-1-alexander.stein@ew.tq-group.com
2023-05-17drm/ttm: let struct ttm_device_funcs be placed in rodataJani Nikula
Make the struct ttm_device_funcs pointers const so the data can be placed in rodata. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230309123700.528641-1-jani.nikula@intel.com
2023-05-17drm/drm_atomic_helper.c: fix a typoSui Jingfeng
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230517041602.3225325-1-suijingfeng@loongson.cn
2023-05-16drm/i915/guc: Dump error capture to dmesg on CTB errorJohn Harrison
In the past, There have been sporadic CTB failures which proved hard to reproduce manually. The most effective solution was to dump the GuC log at the point of failure and let the CI system do the repro. It is preferable not to dump the GuC log via dmesg for all issues as it is not always necessary and is not helpful for end users. But rather than trying to re-invent the code to do this each time it is wanted, commit the code but for DEBUG_GUC builds only. v2: Use IS_ENABLED for testing config options. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418181744.3251240-3-John.C.Harrison@Intel.com
2023-05-16drm/i915: Dump error capture to kernel logJohn Harrison
This is useful for getting debug information out in certain situations, such as failing kernel selftests and CI runs that don't log error captures. It is especially useful for things like retrieving GuC logs as GuC operation can't be tracked by adding printk or ftrace entries. v2: Add CONFIG_DRM_I915_DEBUG_GEM wrapper (review feedback by Rodrigo). Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418181744.3251240-2-John.C.Harrison@Intel.com
2023-05-16drm/panel: Modify innolux hj110iz panel initial codeCong Yang
There is a problem of screen shake on the old panel. So increase the panel GOP component pull-down circuit size in hardware, and update the initialization code at the same time. The new initialization code mainly modifles the following. a)adjusted for GOP timing. When Display sleep in, raise all GOP signals to VGHO and then drop to GND. b)Increased the Vertical back Porch and Vertical pulse width, so need to update vsync_end and vtotal and CLK in drm_display_mode. Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fixed spelling mistake in subject] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230509025153.1321446-1-yangcong5@huaqin.corp-partner.google.com
2023-05-16drm/bridge: tc358768: remove unneeded semicolonFrancesco Dolcini
Remove unneeded stray semicolon. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305152341.oiSjRpv6-lkp@intel.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515184408.9421-1-francesco@dolcini.it
2023-05-16gpu: drm: bridge: No need to set device_driver ownerAnup Sharma
There is no need to exclusively set the .owner member of the struct device_driver when defining the platform_driver struct. The Linux core takes care of setting the .owner member as part of the call to module_platform_driver() helper function. Issue identified using the platform_no_drv_owner.cocci Coccinelle semantic patch as: drivers/gpu/drm/bridge/samsung-dsim.c:1957:6-11: No need to set .owner here. The core will do it. No functional changes are intended. Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/ZF9igb/nvL6GRBsq@yoga
2023-05-16dt-bindings: display: bridge: tc358867: Document TC358867/TC9595 compatibleMarek Vasut
The TC358867/TC9595 devices are compatible with the predecessor TC358767. Document compatible strings for the new devices, so they can be discerned in board DTs. Update the title to match description in the process. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515162033.66986-1-marex@denx.de
2023-05-15drm/vkms: Fix RGB565 pixel conversionMaíra Canal
Currently, the pixel conversion isn't rounding the fixed-point values before assigning it to the RGB coefficients, which is causing the IGT pixel-format tests to fail. So, use the drm_fixp2int_round() fixed-point helper to round the values when assigning it to the RGB coefficients. Tested with igt@kms_plane@pixel-format and igt@kms_plane@pixel-format-source-clamping. [v2]: * Use drm_fixp2int_round() to fix the pixel conversion instead of casting the values to s32 (Melissa Wen). Fixes: 89b03aeaef16 ("drm/vkms: fix 32bit compilation error by replacing macros") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230512104044.65034-2-mcanal@igalia.com
2023-05-15drm: Add fixed-point helper to get rounded integer valuesMaíra Canal
Create a new fixed-point helper to allow us to return the rounded value of our fixed point value. [v2]: * Create the function drm_fixp2int_round() (Melissa Wen). [v3]: * Use drm_fixp2int() instead of shifting manually (Arthur Grillo). Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230512104044.65034-1-mcanal@igalia.com
2023-05-15drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequenceShuijing Li
For "boe,tv105wum-nw0" this special panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-3-shuijing.li@mediatek.com
2023-05-15drm/panel: boe-tv101wum-nl6: Remove extra delayShuijing Li
Reduce the delay after LCM reset by removing an extra delay in the initialization commands array. The required delay of at least 6ms after reset is guaranteed by boe_panel_prepare(). Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-2-shuijing.li@mediatek.com
2023-05-15drm/ssd130x: Fix include guard nameJavier Martinez Canillas
This is a leftover from an early iteration of the driver when it was still named ssd1307 instead of ssd130x. Change it for consistency with the rest. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230512120232.304603-1-javierm@redhat.com
2023-05-15drivers/firmware: Move sysfb_init() from device_initcall to subsys_initcall_syncHuacai Chen
Consider a configuration like this: 1, efifb (or simpledrm) is built-in; 2, a native display driver (such as radeon) is also built-in. As Javier said, this is not a common configuration (the native display driver is usually built as a module), but it can happen and cause some trouble. In this case, since efifb, radeon and sysfb are all in device_initcall() level, the order in practise is like this: efifb registered at first, but no "efi-framebuffer" device yet. radeon registered later, and /dev/fb0 created. sysfb_init() comes at last, it registers "efi-framebuffer" and then causes an error message "efifb: a framebuffer is already registered". Make sysfb_init() to be subsys_ initcall_sync() can avoid this. And Javier Martinez Canillas is trying to make a more general solution in commit 873eb3b11860 ("fbdev: Disable sysfb device registration when removing conflicting FBs"). However, this patch still makes sense because it can make the screen display as early as possible (We cannot move to subsys_initcall, since sysfb_init() should be executed after PCI enumeration). Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220704011704.1418055-1-chenhuacai@loongson.cn
2023-05-15drm/i915/hwmon: Silence UBSAN uninitialized bool variable warningAshutosh Dixit
Loading i915 on UBSAN enabled kernels (CONFIG_UBSAN/CONFIG_UBSAN_BOOL) causes the following warning: UBSAN: invalid-load in drivers/gpu/drm/i915/gt/uc/intel_uc.c:558:2 load of value 255 is not a valid value for type '_Bool' Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 __uc_init_hw+0x76a/0x903 [i915] ... i915_driver_probe+0xfb1/0x1eb0 [i915] i915_pci_probe+0xbe/0x2d0 [i915] The warning happens because during probe i915_hwmon is still not available which results in the output boolean variable *old remaining uninitialized. Silence the warning by initializing the variable to an arbitrary value. v2: Move variable initialization to the declaration (Andi) Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512203735.2635237-1-ashutosh.dixit@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 02:11:17 +0000