| Age | Commit message (Collapse) | Author |
|---|
|
Indent this if statement one tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
====================
net: Add Half Duplex support for ICSSG Driver
This series adds support for half duplex operation for ICSSG driver.
In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG GPIO pin
(PRGx_PRU0/1_GPI10) so that firmware can detect collision signal and apply
the CSMA/CD algorithm applicable for half duplex operation. A DT property,
"ti,half-duplex-capable" is introduced for this purpose in the first patch
of the series. If board has PHY COL pin conencted to PRGx_PRU1_GPIO10,
this DT property can be added to eth node of ICSSG, MII port to support
half duplex operation at that port.
Second patch of the series configures driver to support half-duplex
operation if the DT property "ti,half-duplex-capable" is enabled.
This series addresses comments on [v2]. This series is based on the latest
net-next/main. This series has no dependency.
Changes from v1 to v2:
*) Changed the description of "ti,half-duplex-capable" property as asked
by Rob and Andrew to avoid confusion between capable and enable.
Changes from v1 to v2:
*) Dropped the RFC tag.
*) Added RB tags of Andrew and Roger.
[v1] https://lore.kernel.org/all/20230830113134.1226970-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20230911060200.2164771-1-danishanwar@ti.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for half duplex operation at 10M and 100M link
speeds for AM654x/AM64x devices.
- Driver configures rand_seed, a random number, in DMEM HD_RAND_SEED_OFFSET
field, which will be used by firmware for Back off time calculation.
- Driver informs FW about half duplex link operation in DMEM
PORT_LINK_SPEED_OFFSET field by setting bit 7 for 10/100M HD.
Hence, the half duplex operation depends on board design the
"ti,half-duplex-capable" property has to be enabled for ICSS-G ports if HW
is capable to perform half duplex.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG
GPIO pin (PRGx_PRU0/1_GPI10) so that firmware can detect collision signal
and apply the CSMA/CD algorithm applicable for half duplex operation. A DT
property, "ti,half-duplex-capable" is introduced for this purpose. If
board has PHY COL pin conencted to PRGx_PRU1_GPIO10, this DT property can
be added to eth node of ICSSG, MII port to support half duplex operation at
that port.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We auto-negotiate most ports in the RTL8366RB driver, but
the CPU port is hard-coded to 1Gbit, full duplex, tx and
rx pause.
This isn't very nice. People may configure speed and
duplex differently in the device tree.
Actually respect the arguments passed to the function for
the CPU port, which get passed properly after Russell's
patch "net: dsa: realtek: add phylink_get_caps implementation"
After this the link is still set up properly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PTP block supports generating PPS output signal on GPIO pin. This patch
adds the support in the PTP PHC driver using standard periodic output
interface.
User can enable/disable/configure PPS by writing to the below sysfs entry
echo perout.index start.sec start.nsec period.sec period.nsec >
/sys/class/ptp/ptp0/period
Example to generate 50% duty cycle PPS signal:
echo 0 0 0 0 500000000 > /sys/class/ptp/ptp0/period
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
ipv6: round of data-races fixes
This series is inspired by one related syzbot report.
Many inet6_sk(sk) fields reads or writes are racy.
Move 1-bit fields to inet->inet_flags to provide
atomic safety. inet6_{test|set|clear|assign}_bit() helpers
could be changed later if we need to make room in inet_flags.
Also add missing READ_ONCE()/WRITE_ONCE() when
lockless readers need access to specific fields.
np->srcprefs will be handled separately to avoid merge conflicts
because a prior patch was posted for net tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->sndflow reads are racy.
Use one bit ftom atomic inet->inet_flags instead,
IPV6_FLOWINFO_SEND setsockopt() can be lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most np->pmtudisc reads are racy.
Move this 3bit field on a full byte, add annotations
and make IPV6_MTU_DISCOVER setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reads from np->rtalert_isolate are racy.
Move this flag to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->repflow to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->recverr is moved to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->dontfrag flag to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->autoflowlabel and np->autoflowlabel_set in inet->inet_flags,
to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->mc_all to an atomic flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->recverr_rfc4884 to an atomic flag to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add one missing READ_ONCE() annotation in do_ipv6_getsockopt()
and make IPV6_MINHOPCOUNT setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->frag_size can be read/written without holding socket lock.
Add missing annotations and make IPV6_MTU setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes data-races around np->mcast_hops,
and make IPV6_MULTICAST_HOPS lockless.
Note that np->mcast_hops is never negative,
thus can fit an u8 field instead of s16.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add inet6_{test|set|clear|assign}_bit() helpers.
Note that I am using bits from inet->inet_flags,
this might change in the future if we need more flags.
While solving data-races accessing np->mc_loop,
this patch also allows to implement lockless accesses
to np->mcast_hops in the following patch.
Also constify sk_mc_loop() argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some np->hop_limit accesses are racy, when socket lock is not held.
Add missing annotations and switch to full lockless implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current code charges modmem for regular trampoline, but not for struct_ops
trampoline. Add bpf_jit_[charge|uncharge]_modmem() to struct_ops so the
trampoline is charged in both cases.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230914222542.2986059-1-song@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This test relies on bpf_testmod, so skip it if the module is not available.
Fixes: aa3d65de4b900 ("bpf/selftests: Test fentry attachment to shadowed functions")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
|
|
Magnus Karlsson says:
====================
seltests/xsk: various improvements to xskxceiver
This patch set implements several improvements to the xsk selftests
test suite that I thought were useful while debugging the xsk
multi-buffer code and tests. The largest new feature is the ability to
be able to execute a single test instead of the whole test suite. This
required some surgery on the current code, details below.
Anatomy of the path set:
1: Print useful info on a per packet basis with the option -v
2: Add a timeout in the transmission loop too. We only used to have
one for the Rx thread, but Tx can lock up too waiting for
completions.
3: Add an option (-m) to only run the tests (or a single test with a
later patch) in a single mode: skb, drv, or zc (zero-copy).
4-5: Preparatory patches to be able to specify a test to run. Need to
define the test names in a single structure and their entry
points, so we can use this when wanting to run a specific test.
6: Adds a command line option (-l) that lists all the tests.
7: Adds a command line option (-t) that runs a specific test instead
of the whole test suite. Can be combined with -m to specify a
single mode too.
8: Use ksft_print_msg() uniformly throughout the tests. It was a mix
of printf() and ksft_print_msg() before.
9: In some places, we failed the whole test suite instead of a single
test in certain circumstances. Fix this so only the test in
question is failed and the rest of the test suite continues.
10: Display the available command line options with -h
v3 -> v4:
* Fixed another spelling error in patch #9 [Maciej]
* Only allow the actual strings for the -m command [Maciej]
* Move some code from patch #7 to #3 [Maciej]
v2 -> v3:
* Drop the support for environment variables. Probably not useful. [Maciej]
* Fixed spelling mistake in patch #9 [Maciej]
* Fail gracefully if unsupported mode is chosen [Maciej]
* Simplified test run loop [Maciej]
v1 -> v2:
* Introduce XSKTEST_MODE env variable to be able to set the mode to
use [Przemyslaw]
* Introduce XSKTEST_ETH env variable to be able to set the ethernet
interface to use by introducing a new patch (#11) [Magnus]
* Fixed spelling error in patch #5 [Przemyslaw, Maciej]
* Fixed confusing documentation in patch #10 [Przemyslaw]
* The -l option can now be used without being root [Magnus, Maciej]
* Fixed documentation error in patch #7 [Maciej]
* Added error handling to the -t option [Maciej]
* -h now displayed as an option [Maciej]
Thanks: Magnus
====================
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-1-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the -h option to display all available command line options
available for test_xsk.sh and xskxceiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In a number of places at en error, exit_with_error() is called that
terminates the whole test suite. This is not always desirable as it
would be more logical to only fail that test and then go along with
the other ones. So change this in a number of places in which I
thought it would be more logical to just fail the test in
question. Examples of this are in code that is only used by a single
test.
Also delete a pointless if-statement in receive_pkts() that has an
exit_with_error() in it. It can never occur since the return value is
an unsigned and the test is for less than zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use ksft_print_msg() instead of printf() and fprintf() in all places
as the ksefltests framework is being used. There is only one exception
and that is for the list-of-tests print out option, since no tests are
run in that case.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a command line option to be able to run a single test. This option
(-t) takes a number from the list of tests available with the "-l"
option. Here are two examples:
Run test number 2, the "receive single packet" test in all available modes:
./test_xsk.sh -t 2
Run test number 21, the metadata copy test in skb mode only
./test_xsh.sh -t 21 -m skb
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a command line option (-l) that lists all the tests. The number
before the test will be used in the next commit for specifying a
single test to run. Here is an example of the output:
Tests:
0: SEND_RECEIVE
1: SEND_RECEIVE_2K_FRAME
2: SEND_RECEIVE_SINGLE_PKT
3: POLL_RX
4: POLL_TX
5: POLL_RXQ_FULL
6: POLL_TXQ_FULL
7: SEND_RECEIVE_UNALIGNED
:
:
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Declare the test names statically in a struct so that we can refer to
them when adding the support to execute a single test in the next
commit. Before this patch, the names of them were not declared in a
single place which made it not possible to refer to them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prepare for the capability to be able to run a single test by moving
all the tests to their own functions. This function can then be called
to execute that test in the next commit.
Also, the tests named RUN_TO_COMPLETION_* were not named well, so
change them to SEND_RECEIVE_* as it is just a basic send and receive
test of 4K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add an option -m on the command line that allows the user to run the
tests in a single mode instead of all of them. Valid modes are skb,
drv, and zc (zero-copy). An example:
To run test suite in drv mode only:
./test_xsk.sh -m drv
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a timeout for the transmission thread. If packets are not
completed properly, for some reason, the test harness would previously
get stuck forever in a while loop. But with this patch, this timeout
will trigger, flag the test as a failure, and continue with the next
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Print info about every packet in verbose mode, both for Tx and
Rx. This is useful to have when a test fails or to validate that a
test is really doing what it was designed to do. Info on what is
supposed to be received and sent is also printed for the custom packet
streams since they differ from the base line. Here is an example:
Tx addr: 37e0 len: 64 options: 0 pkt_nb: 8
Tx addr: 4000 len: 64 options: 0 pkt_nb: 9
Rx: addr: 100 len: 64 options: 0 pkt_nb: 0 valid: 1
Rx: addr: 1100 len: 64 options: 0 pkt_nb: 1 valid: 1
Rx: addr: 2100 len: 64 options: 0 pkt_nb: 4 valid: 1
Rx: addr: 3100 len: 64 options: 0 pkt_nb: 8 valid: 1
Rx: addr: 4100 len: 64 options: 0 pkt_nb: 9 valid: 1
One pointless verbose print statement is also deleted and another one
is made clearer.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084100.1502379-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084039.1501984-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Eric Dumazet says:
====================
udp: round of data-races fixes
This series is inspired by multiple syzbot reports.
Many udp fields reads or writes are racy.
Add a proper udp->udp_flags and move there all
flags needing atomic safety.
Also add missing READ_ONCE()/WRITE_ONCE() when
lockless readers need access to specific fields.
====================
Link: https://lore.kernel.org/r/20230912091730.1591459-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy.
Move udp->pcflag to udp->udp_flags for atomicity,
and add READ_ONCE()/WRITE_ONCE() annotations for pcslen and pcrlen.
Fixes: ba4e58eca8aa ("[NET]: Supporting UDP-Lite (RFC 3828) in Linux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This flag is set but never read, we can remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot/KCSAN complained about UDP_ENCAP_L2TPINUDP setsockopt() racing.
Add READ_ONCE()/WRITE_ONCE() to document races on this lockless field.
syzbot report was:
BUG: KCSAN: data-race in udp_lib_setsockopt / udp_lib_setsockopt
read-write to 0xffff8881083603fa of 1 bytes by task 16557 on cpu 0:
udp_lib_setsockopt+0x682/0x6c0
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read-write to 0xffff8881083603fa of 1 bytes by task 16554 on cpu 1:
udp_lib_setsockopt+0x682/0x6c0
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x05
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16554 Comm: syz-executor.5 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move udp->encap_enabled to udp->udp_flags.
Add udp_test_and_set_bit() helper to allow lockless
udp_tunnel_encap_enable() implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These are read locklessly, move them to udp_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
UDP_ENCAP_ESPINUDP_NON_IKE setsockopt() writes over up->encap_rcv
while other cpus read it.
Fixes: 067b207b281d ("[UDP]: Cleanup UDP encapsulation code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported that udp->gro_enabled can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported that udp->no_check6_rx can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported that udp->no_check6_tx can be read locklessly.
Use one atomic bit from udp->udp_flags
Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to syzbot, it is time to use proper atomic flags
for various UDP flags.
Add udp_flags field, and convert udp->corkflag to first
bit in it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Check if update_wo_rx_stats function pointer is properly set in
mtk_wed_update_rx_stats routine before accessing it.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/b0d233386e059bccb59f18f69afb79a7806e5ded.1694507226.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
