| Age | Commit message (Collapse) | Author |
|---|
|
The module is supported, adding it.
Not all Loongson-2K1000 boards have an i2s interface, here is an example
of enabling it:
sound {
compatible = "loongson,ls-audio-card";
model = "Loongson-ASoC";
mclk-fs = <512>;
cpu {
sound-dai = <&i2s>;
};
codec {
sound-dai = <&uda1342>;
};
};
&apbdma2 {
status = "okay";
};
&apbdma3 {
status = "okay";
};
&i2c3 {
status = "okay";
pinctrl-0 = <&i2c1_pins_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
uda1342: codec@1a {
compatible = "nxp,uda1342";
reg = <0x1a>;
#sound-dai-cells = <0>;
};
};
&i2s {
status = "okay";
pinctrl-0 = <&hda_pins_default>;
pinctrl-names = "default";
};
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch has supported PREEMPT_RT now. It uses GENERIC_ENTRY, so just
add the TIF bit (TIF_NEED_RESCHED_LAZY) related definitions and select
the Kconfig symbol (ARCH_HAS_PREEMPT_LAZY) is enough to make it go.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
It is really time.
LoongArch has all the required architecture related changes, that have
been identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on LoongArch.
Below are the latency data from cyclictest on a 4-core Loongson-3A5000
machine, with a "make -j8" kernel building workload in the background.
1. PREEMPT kernel with default configuration:
./cyclictest -a -t -m -i200 -d0 -p99
policy: fifo: loadavg: 8.78 8.96 8.64 10/296 64800
T: 0 ( 4592) P:99 I:200 C:14838617 Min: 3 Act: 6 Avg: 8 Max: 844
T: 1 ( 4593) P:99 I:200 C:14838765 Min: 3 Act: 9 Avg: 8 Max: 909
T: 2 ( 4594) P:99 I:200 C:14838510 Min: 3 Act: 7 Avg: 8 Max: 832
T: 3 ( 4595) P:99 I:200 C:14838631 Min: 3 Act: 8 Avg: 8 Max: 931
2. PREEMPT_RT kernel with default configuration:
./cyclictest -a -t -m -i200 -d0 -p99
policy: fifo: loadavg: 10.38 10.47 10.35 9/336 77788
T: 0 ( 3941) P:99 I:200 C:19439626 Min: 3 Act: 12 Avg: 8 Max: 227
T: 1 ( 3942) P:99 I:200 C:19439624 Min: 2 Act: 11 Avg: 8 Max: 184
T: 2 ( 3943) P:99 I:200 C:19439623 Min: 3 Act: 4 Avg: 7 Max: 223
T: 3 ( 3944) P:99 I:200 C:19439623 Min: 2 Act: 10 Avg: 7 Max: 226
3. PREEMPT_RT kernel with tuned configuration:
./cyclictest -a -t -m -i200 -d0 -p99
policy: fifo: loadavg: 10.52 10.66 10.62 12/334 109397
T: 0 ( 4765) P:99 I:200 C:29335186 Min: 3 Act: 6 Avg: 8 Max: 62
T: 1 ( 4766) P:99 I:200 C:29335185 Min: 3 Act: 10 Avg: 8 Max: 52
T: 2 ( 4767) P:99 I:200 C:29335184 Min: 3 Act: 8 Avg: 8 Max: 64
T: 3 ( 4768) P:99 I:200 C:29335183 Min: 3 Act: 12 Avg: 8 Max: 53
Main instruments of tuned configuration include: Disable the boot rom
space in BIOS, in order to avoid kernel's speculative access to low-
speed memory (i.e. boot rom space); Disable CPUFreq scaling; Disable
RTC synchronization in the ntpd/chronyd service (also avoid other RTC
accesses when running low-latency workloads).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Move POSIX CPU timer expiry and signal delivery into task context to
allow PREEMPT_RT setups to coexist with KVM.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit bab1c299f3945ffe79 ("LoongArch: Fix sleeping in atomic context in
setup_tlb_handler()") changes the gfp flag from GFP_KERNEL to GFP_ATOMIC
for alloc_pages_node(). However, for PREEMPT_RT kernels we can still get
a "sleeping in atomic context" error:
[ 0.372259] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 0.372266] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[ 0.372268] preempt_count: 1, expected: 0
[ 0.372270] RCU nest depth: 1, expected: 1
[ 0.372272] 3 locks held by swapper/1/0:
[ 0.372274] #0: 900000000c9f5e60 (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x524/0x1c60
[ 0.372294] #1: 90000000087013b8 (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x50/0x140
[ 0.372305] #2: 900000047fffd388 (&zone->lock){+.+.}-{3:3}, at: __rmqueue_pcplist+0x30c/0xea0
[ 0.372314] irq event stamp: 0
[ 0.372316] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[ 0.372322] hardirqs last disabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0
[ 0.372329] softirqs last enabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0
[ 0.372335] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 0.372341] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7+ #1891
[ 0.372346] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022
[ 0.372349] Stack : 0000000000000089 9000000005a0db9c 90000000071519c8 9000000100388000
[ 0.372486] 900000010038b890 0000000000000000 900000010038b898 9000000007e53788
[ 0.372492] 900000000815bcc8 900000000815bcc0 900000010038b700 0000000000000001
[ 0.372498] 0000000000000001 4b031894b9d6b725 00000000055ec000 9000000100338fc0
[ 0.372503] 00000000000000c4 0000000000000001 000000000000002d 0000000000000003
[ 0.372509] 0000000000000030 0000000000000003 00000000055ec000 0000000000000003
[ 0.372515] 900000000806d000 9000000007e53788 00000000000000b0 0000000000000004
[ 0.372521] 0000000000000000 0000000000000000 900000000c9f5f10 0000000000000000
[ 0.372526] 90000000076f12d8 9000000007e53788 9000000005924778 0000000000000000
[ 0.372532] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[ 0.372537] ...
[ 0.372540] Call Trace:
[ 0.372542] [<9000000005924778>] show_stack+0x38/0x180
[ 0.372548] [<90000000071519c4>] dump_stack_lvl+0x94/0xe4
[ 0.372555] [<900000000599b880>] __might_resched+0x1a0/0x260
[ 0.372561] [<90000000071675cc>] rt_spin_lock+0x4c/0x140
[ 0.372565] [<9000000005cbb768>] __rmqueue_pcplist+0x308/0xea0
[ 0.372570] [<9000000005cbed84>] get_page_from_freelist+0x564/0x1c60
[ 0.372575] [<9000000005cc0d98>] __alloc_pages_noprof+0x218/0x1820
[ 0.372580] [<900000000593b36c>] tlb_init+0x1ac/0x298
[ 0.372585] [<9000000005924b74>] per_cpu_trap_init+0x114/0x140
[ 0.372589] [<9000000005921964>] cpu_probe+0x4e4/0xa60
[ 0.372592] [<9000000005934874>] start_secondary+0x34/0xc0
[ 0.372599] [<900000000715615c>] smpboot_entry+0x64/0x6c
This is because in PREEMPT_RT kernels normal spinlocks are replaced by
rt spinlocks and rt_spin_lock() will cause sleeping. Fix it by disabling
NUMA optimization completely for PREEMPT_RT kernels.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now the min_delta is 0x600 (1536) for LoongArch's constant clockevent
device. For a 100MHz hardware timer this means ~15us. This is a little
big, especially for PREEMPT_RT enabled kernels. So reduce it to 100 for
PREEMPT_RT kernel, and 1000 for others (we don't want too small values
to affect performance).
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
(1) Description of Problem:
When testing BPF JIT with the latest compiler toolchains on LoongArch,
there exist some strange failed test cases, dmesg shows something like
this:
# dmesg -t | grep FAIL | head -1
... ret -3 != -3 (0xfffffffd != 0xfffffffd)FAIL ...
(2) Steps to Reproduce:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
(3) Additional Info:
There are no failed test cases compiled with the lower version of GCC
such as 13.3.0, while the problems only appear with higher version of
GCC such as 14.2.0.
This is because the problems were hidden by the lower version of GCC due
to redundant sign extension instructions generated by compiler, but with
optimization of higher version of GCC, the sign extension instructions
have been removed.
(4) Root Cause Analysis:
The LoongArch architecture does not expose sub-registers, and hold all
32-bit values in a sign-extended format. While BPF, on the other hand,
exposes sub-registers, and use zero-extension (similar to arm64/x86).
This has led to some subtle bugs, where a BPF JITted program has not
sign-extended the a0 register (return value in LoongArch land), passed
the return value up the kernel, for example:
| int from_bpf(void);
|
| long foo(void)
| {
| return from_bpf();
| }
Here, a0 would be 0xffffffff instead of the expected 0xffffffffffffffff.
Internally, the LoongArch JIT uses a5 as a dedicated register for BPF
return values. That is to say, the LoongArch BPF uses a5 for BPF return
values, which are zero-extended, whereas the LoongArch ABI uses a0 which
is sign-extended.
(5) Final Solution:
Keep a5 zero-extended, but explicitly sign-extend a0 (which is used
outside BPF land). Because libbpf currently defines the return value
of an ebpf program as a 32-bit unsigned integer, just use addi.w to
extend bit 31 into bits 63 through 32 of a5 to a0. This is similar to
commit 2f1b0d3d7331 ("riscv, bpf: Sign-extend return values").
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Whenever I try to build the kernel with upcoming GCC 15 which defaults
to -std=gnu23 I get a build failure:
CC arch/loongarch/vdso/vgetcpu.o
In file included from ./include/uapi/linux/posix_types.h:5,
from ./include/uapi/linux/types.h:14,
from ./include/linux/types.h:6,
from ./include/linux/kasan-checks.h:5,
from ./include/asm-generic/rwonce.h:26,
from ./arch/loongarch/include/generated/asm/rwonce.h:1,
from ./include/linux/compiler.h:317,
from ./include/asm-generic/bug.h:5,
from ./arch/loongarch/include/asm/bug.h:60,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/mm.h:6,
from ./arch/loongarch/include/asm/vdso.h:10,
from arch/loongarch/vdso/vgetcpu.c:6:
./include/linux/stddef.h:11:9: error: expected identifier before 'false'
11 | false = 0,
| ^~~~~
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
| ^~~~
./include/linux/types.h:35:1: warning: useless type name in empty declaration
35 | typedef _Bool bool;
| ^~~~~~~
The kernel builds explicitly with -std=gnu11 in top Makefile, but
arch/loongarch/vdso does not use KBUILD_CFLAGS from the rest of the
kernel, just add -std=gnu11 flag to arch/loongarch/vdso/Makefile.
By the way, commit e8c07082a810 ("Kbuild: move to -std=gnu11") did a
similar change for arch/arm64/kernel/vdso32/Makefile.
Fixes: c6b99bed6b8f ("LoongArch: Add VDSO and VSYSCALL support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
Cc: stable@vger.kernel.org
Tested-by: Haiyong Sun <sunhaiyong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If an optional resource is found but fails to remap, return on failure.
Avoids any potential problems when using the iomapped resource as the
assumption is that it's available.
Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241121193152.8966-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the missing 'name' parameter to the mount_api documentation for
fs_validate_description().
Fixes: 96cafb9ccb15 ("fs_parser: remove fs_parameter_description name field")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20241125215021.231758-1-rdunlap@infradead.org
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hangbin Liu says:
====================
ipv6: fix temporary address not removed correctly
Currently the temporary address is not removed when mngtmpaddr is deleted
or becomes unmanaged. The patch set fixed this issue and add a related
test.
v2:
1) delete the tempaddrs directly instead of remove them in addrconf_verify_rtnl(Sam Edwards)
2) Update the test case by checking the address including, add Sam in SOB (Sam Edwards)
====================
Link: https://patch.msgid.link/20241120095108.199779-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test to check the temporary address could be added/removed
correctly when mngtempaddr is set or removed/unmanaged.
Signed-off-by: Sam Edwards <cfsworks@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RFC8981 section 3.4 says that existing temporary addresses must have their
lifetimes adjusted so that no temporary addresses should ever remain "valid"
or "preferred" longer than the incoming SLAAC Prefix Information. This would
strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or
un-flagged as such, its corresponding temporary addresses must be cleared out
right away.
But now the temporary address is renewed even after ‘mngtmpaddr’ is removed
or becomes unmanaged as manage_tempaddrs() set temporary addresses
prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings
failed to remove the addresses. Fix this by deleting the temporary address
directly for these situations.
Fixes: 778964f2fdf0 ("ipv6/addrconf: fix timing bug in tempaddr regen")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Set the initial eee_cfg values to have 'ethtool --show-eee ' display
the initial EEE configuration.
Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Cc: <stable@vger.kernel.org>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241120083818.1079456-1-yong.liang.choong@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Justin Lai says:
====================
Correcting switch hardware versions and reported speeds
This patch set mainly involves correcting switch hardware versions and
reported speeds.
Details are as follows:
1. Refactor the rtase_check_mac_version_valid() function.
2. Correct the speed for RTL907XD-V1
3. Corrects error handling of the rtase_check_mac_version_valid()
v1 -> v2:
- Add Fixes: tag.
- Add defines for hardware version id.
- Modify the error message for an invalid hardware version ID.
v2 -> v3:
- Remove the patch "Add support for RTL907XD-VA PCIe port".
v3 -> v4:
- Modify commit message to describe the main reason for the fix.
v4 -> v5
- Integrate the addition of defines for hardware version ID into the patch
"rtase: Refactor the rtase_check_mac_version_valid() function."
====================
Link: https://patch.msgid.link/20241120075624.499464-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously, when the hardware version ID was determined to be invalid,
only an error message was printed without any further handling. Therefore,
this patch makes the necessary corrections to address this.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously, the reported speed was uniformly set to SPEED_5000, but the
RTL907XD-V1 actually operates at a speed of SPEED_10000. Therefore, this
patch makes the necessary correction.
Fixes: dd7f17c40fd1 ("rtase: Implement ethtool function")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Different hardware requires different configurations, but this distinction
was not made previously. Additionally, the error message was not clear
enough. Therefore, this patch will address the issues mentioned above.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount
(skb->users) and iucv_sock_recvmsg() does not decrement skb refcount
at exit.
This results in skb memory leak in skb_queue_purge() and WARN_ON in
iucv_sock_destruct() during socket close. To fix this decrease
skb refcount by one if MSG_PEEK is set in order to prevent memory
leak and WARN_ON.
WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv]
CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv]
[<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv]
[<001587c704117a32>] __sk_destruct+0x52/0x550
[<001587c704104a54>] __sock_release+0xa4/0x230
[<001587c704104c0c>] sock_close+0x2c/0x40
[<001587c702c5f5a8>] __fput+0x2e8/0x970
[<001587c7024148c4>] task_work_run+0x1c4/0x2c0
[<001587c7023b0716>] do_exit+0x996/0x1050
[<001587c7023b13aa>] do_group_exit+0x13a/0x360
[<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60
[<001587c7022bccca>] do_syscall+0x27a/0x380
[<001587c7049a6a0c>] __do_syscall+0x9c/0x160
[<001587c7049ce8a8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv]
Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20241119152219.3712168-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In l2tp's net exit handler, we check that an IDR is empty before
destroying it:
WARN_ON_ONCE(!idr_is_empty(&pn->l2tp_tunnel_idr));
idr_destroy(&pn->l2tp_tunnel_idr);
By forcing memory allocation failures in idr_alloc_32, syzbot is able
to provoke a condition where idr_is_empty returns false despite there
being no items in the IDR. This turns out to be because the radix tree
of the IDR contains only internal radix-tree nodes and it is this that
causes idr_is_empty to return false. The internal nodes are cleaned by
idr_destroy.
Use idr_for_each to check that the IDR is empty instead of
idr_is_empty to avoid the problem.
Reported-by: syzbot+332fe1e67018625f63c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=332fe1e67018625f63c9
Fixes: 73d33bd063c4 ("l2tp: avoid using drain_workqueue in l2tp_pre_exit_net")
Signed-off-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20241118140411.1582555-1-jchapman@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- remove unused functions and variables
- rate-limit error messages in syslog
- fix typo
- remove u64 alignment requirement for murmurhash
- reset bi_ioprio to the default for dm-vdo
- add support for get_unique_id
- Add missing destroy_work_on_stack() to dm-thin
- use kmalloc to allocate power-of-two sized buffers in bufio
* tag 'for-6.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: remove the unused "data_start" variable
dm-bufio: use kmalloc to allocate power-of-two sized buffers
dm thin: Add missing destroy_work_on_stack()
dm: add support for get_unique_id
dm vdo: fix function doc comment formatting
dm vdo int-map: remove unused parameters
dm-vdo: reset bi_ioprio to the default value when the bio is reset
dm-vdo murmurhash: remove u64 alignment requirement
dm: Fix typo in error message
dm ioctl: rate limit a couple of ioctl based error messages
dm vdo: Remove unused uds_compute_index_size
dm vdo: Remove unused functions
dm: zoned: Remove unused functions
dm: Remove unused dm_table_bio_based
dm: Remove unused dm_set_md_type
dm cache: Remove unused functions in bio-prison-v1
dm cache: Remove unused dm_cache_size
dm cache: Remove unused dm_cache_dump
dm cache: Remove unused btracker_nr_writebacks_queued
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
|
|
The merge commit ae3325f752ef ("Merge branches 'arm/smmu', 'mediatek',
's390', 'ti/omap', 'riscv' and 'core' into next") left a stale
declaration of 'iommu_present()' even though the 'core' branch that was
merged had removed the function (and the declaration).
Remove it for real.
Reported-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Ira Weiny:
"Most represent minor cleanups and code removals. One patch fixes
potential NULL pointer arithmetic which was benign because the offset
of the member was 0. Nevertheless it should be cleaned up.
- typo fixes
- clarify logic to remove potential NULL pointer math
- remove dead code"
* tag 'libnvdimm-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Remove an unused field in struct dax_operations
dax: delete a stale directory pmem
nvdimm: rectify the illogical code within nd_dax_probe()
nvdimm: Correct some typos in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Common:
- switch back from remove_new() to remove() callback
imx:
- fix format specifier
zynqmp:
- setup IPI for each child node
thead:
- Add th1520 driver and bindings
qcom:
- add SM8750 and SAR2130p compatibles
- fix expected clocks for callbacks
- use IRQF_NO_SUSPEND for cpucp
mtk-cmdq:
- switch to __pm_runtime_put_autosuspend()
- fix alloc size of clocks
mpfs:
- fix reg properties
ti-msgmgr:
- don't use of_match_ptr helper
- enable COMPILE_TEST build
pcc:
- consider the PCC_ACK_FLAG
arm_mhuv2:
- fix non-fatal improper reuse of variable"
* tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: pcc: Check before sending MCTP PCC response ACK
mailbox: Switch back to struct platform_driver::remove()
mailbox: imx: Modify the incorrect format specifier
mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb()
mailbox: zynqmp: setup IPI for each valid child node
dt-bindings: mailbox: Add thead,th1520-mailbox bindings
mailbox: Introduce support for T-head TH1520 Mailbox driver
mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks()
dt-bindings: mailbox: qcom-ipcc: Add SM8750
dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
mailbox: ti-msgmgr: Allow building under COMPILE_TEST
mailbox: ti-msgmgr: Remove use of of_match_ptr() helper
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
mailbox: mpfs: support new, syscon based, devicetree configuration
dt-bindings: mailbox: mpfs: fix reg properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Andi was super busy the last weeks, so this pull requests contains one
series (nomadik) and a number of smaller additions which were ready to
go but nearly overlooked.
New feature support:
- Added support for frequencies up to 3.4 MHz on Nomadik I2C
- DesignWare now accounts for bus capacitance and clock optimisation
(declared as new parameters in the binding) to improve the
calculation of signal rise and fall times (t_high and t_low)
New Hardware support:
- DWAPB I2C controller on FUJITSU-MONAKA (new ACPI HID)
- Allwinner A523 (new compatible ID)
- Mobileye EyeQ6H (new compatible ID)"
* tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
i2c: designware: determine HS tHIGH and tLOW based on HW parameters
dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
i2c: nomadik: support >=1MHz speed modes
i2c: nomadik: fix BRCR computation
i2c: nomadik: support Mobileye EyeQ6H I2C controller
i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
i2c: designware: Add ACPI HID for DWAPB I2C controller on FUJITSU-MONAKA
i2c: qup: use generic device property accessors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"A few updates for the 6.13 kernel, including some typo corrections in
the software stack and some fixes for tools. Additionally, it includes
a change resulting from the deprecation of a kernel API in the PCI
subsystem"
* tag 'firewire-updates-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
tools/firewire: Fix several incorrect format specifiers
firewire: ohci: Replace deprecated PCI functions
firewire: Correct some typos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Add new slab_strict_numa boot parameter to enforce per-object memory
policies on top of slab folio policies, for systems where saving cost
of remote accesses is more important than minimizing slab allocation
overhead (Christoph Lameter)
- Fix for freeptr_offset alignment check being too strict for m68k
(Geert Uytterhoeven)
- krealloc() fixes for not violating __GFP_ZERO guarantees on
krealloc() when slub_debug (redzone and object tracking) is enabled
(Feng Tang)
- Fix a memory leak in case sysfs registration fails for a slab cache,
and also no longer fail to create the cache in that case (Hyeonggon
Yoo)
- Fix handling of detected consistency problems (due to buggy slab
user) with slub_debug enabled, so that it does not cause further list
corruption bugs (yuan.gao)
- Code cleanup and kerneldocs polishing (Zhen Lei, Vlastimil Babka)
* tag 'slab-for-6.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix too strict alignment check in create_cache()
mm/slab: Allow cache creation to proceed even if sysfs registration fails
mm/slub: Avoid list corruption when removing a slab from the full list
mm/slub, kunit: Add testcase for krealloc redzone and zeroing
mm/slub: Improve redzone check and zeroing for krealloc()
mm/slub: Consider kfence case for get_orig_size()
SLUB: Add support for per object memory policies
mm, slab: add kerneldocs for common SLAB_ flags
mm/slab: remove duplicate check in create_cache()
mm/slub: Move krealloc() and related code to slub.c
mm/kasan: Don't store metadata inside kmalloc object when slub_debug_orig_size is on
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Disable __counted_by in Clang < 19.1.3 (Jan Hendrik Farr)
- string_helpers: Silence output truncation warning (Bartosz
Golaszewski)
- compiler.h: Avoid needing BUILD_BUG_ON_ZERO() (Philipp Reisner)
- MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
(Thorsten Blum)
* tag 'hardening-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Compiler Attributes: disable __counted_by for clang < 19.1.3
compiler.h: Fix undefined BUILD_BUG_ON_ZERO()
lib: string_helpers: silence snprintf() output truncation warning
MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
|
|
When the size isn't a small constant, __access_ok() will call
valid_user_address() with the address after the last byte of the user
buffer.
It is valid for a buffer to end with the last valid user address so
valid_user_address() must allow accesses to the base of the guard page.
[ This introduces an off-by-one in the other direction for the plain
non-sized accesses, but since we have that guard region that is a
whole page, those checks "allowing" accesses to that guard region
don't really matter. The access will fault anyway, whether to the
guard page or if the address has been masked to all ones - Linus ]
Fixes: 86e6b1547b3d0 ("x86: fix user address masking non-canonical speculation issue")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Josh Poimboeuf reports that he got a "will-it-scale.per_process_ops 1.9%
improvement" report for his patch that changed __get_user() to use
pointer masking instead of the explicit speculation barrier. However,
that patch doesn't actually work in the general case, because some (very
bad) architecture-specific code actually depends on __get_user() also
working on kernel addresses.
A profile showed that the offending __get_user() was the futex code,
which really should be fixed up to not use that horrid legacy case.
Rewrite futex_get_value_locked() to use the modern user acccess helpers,
and inline it so that the compiler not only avoids the function call for
a few instructions, but can do CSE on the address masking.
It also turns out the x86 futex functions have unnecessary barriers in
other places, so let's fix those up too.
Link: https://lore.kernel.org/all/20241115230653.hfvzyf3aqqntgp63@jpoimboe/
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- omapfb: Remove unused code (Dr. David Alan Gilbert)
- sh7760fb: Fix memory leak in error path of sh7760fb_alloc_mem() (Zhen
Lei)
* tag 'fbdev-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: Remove some deadcode
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
|
|
- Fix typos and whitespace errors (Bjorn Helgaas)
* pci/typos:
PCI: Fix typos
|
|
- Reorganize kerneldoc parameter names to match order in function signature
(Julia Lawall)
- Remove kerneldoc return value descriptions from hotplug registration
interfaces that don't return anything (Ilpo Järvinen)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)
* pci/misc:
tools: PCI: Fix incorrect printf format specifiers
PCI: Simplify pci_create_slot() logic
PCI: Fix reset_method_store() memory leak
PCI: hotplug: Remove "Returns" kerneldoc from void functions
PCI: hotplug: Reorganize kerneldoc parameter names
|
|
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
* pci/controller/vmd:
PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
|
|
- Move endpoint controller cleanups that depend on refclk from the host to
the notifier that tells us the host has deasserted PERST# (Manivannan
Sadhasivam)
* pci/controller/tegra194:
PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()
|
|
- Fix address translation unit programming (Damien Le Moal)
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align
value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead of
searching for it, and verify that the address was mapped (Damien Le Moal)
- When mapping an endpoint window, verify that the address hasn't been
mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which fixes
intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le
Moal)
- Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources()
for consistency with similar DT interfaces (Damien Le Moal)
- Factor out memory allocations to tidy rockchip_pcie_ep_probe() (Damien Le
Moal)
- Factor out MSI-X quirk to tidy rockchip_pcie_ep_probe() (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and only in
the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and controller
configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it (Damien Le
Moal)
- Add a handler for PERST# signal so we can detect host resets and start
link training when exiting reset (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
|
|
- Enable MSI interrupts if 'global' IRQ is supported, since a previous
commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the host to
the notifier that tells us the host has deasserted PERST# (Manivannan
Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a
and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml
DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom
platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the link
comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to
support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map'
DT property and doesn't need BDF-to-SID translation (Qiang Yu)
* pci/controller/qcom:
PCI: qcom: Disable ASPM L0s for X1E80100
PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
PCI: qcom: Add support for IPQ9574
dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller
PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()
PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported
|
|
- Add DT and driver support for using either of the two PolarFire Root
Ports (Conor Dooley)
* pci/controller/microchip:
PCI: microchip: Add support for using either Root Port 1 or 2
dt-bindings: PCI: microchip,pcie-host: Add reg for Root Port 2
|
|
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
* pci/controller/mediatek:
PCI: mediatek-gen3: Remove unneeded semicolon
PCI: mediatek-gen3: Add support for restricting link width
PCI: mediatek-gen3: Add support for setting max-link-speed limit
|
|
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex
mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we can do
(Kishon Vijay Abraham I)
* pci/controller/keystone:
PCI: keystone: Add link up check to ks_pcie_other_map_bus()
PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible
|
|
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us),
before deasserting PERST# to ensure power and refclk are stable
(Siddharth Vadapalli)
* pci/controller/j721e:
PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds
PCI: j721e: Add PCIe support for J722S SoC
|
|
- Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that
prevents use of L2 (Stefan Eichenberger)
* pci/controller/imx6:
PCI: imx6: Fix suspend/resume support on i.MX6QDL
|
|
- Clear outbound address on unmap so dw_pcie_find_index() won't match an
ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when testing
for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
* pci/controller/dwc:
PCI: dwc: ep: Fix advertised resizable BAR size regression
PCI: dwc: Use of_property_present() for non-boolean properties
PCI: dwc: endpoint: Clear outbound address on unmap
|
|
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
* pci/controller/cadence:
PCI: cadence: Lower severity of message when phy-names property is absent in DTS
|
|
- Add pci_epc_function_is_valid() to avoid repeating common validation
checks (Damien Le Moal)
- Skip attempts to allocate from endpoint controller memory window if the
requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle
controller-specific size and alignment constraints, and add test cases to
the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe
DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas
Cassel)
- Remove superfluous 'return' from pci_epf_test_clean_dma_chan() (Wang
Jiang)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT
property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid use-after-free
(Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing
the secondary controller associated with an NTB (Zijun Hu)
- Fix pci_epc_map map_size kerneldoc (Rick Wertenbroek)
* pci/endpoint:
PCI: endpoint: Fix pci_epc_map map_size kerneldoc string
PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf()
PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy()
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
PCI: endpoint: Remove surplus return statement from pci_epf_test_clean_dma_chan()
PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
PCI: endpoint: test: Synchronously cancel command handler work
PCI: dwc: endpoint: Implement the pci_epc_ops::align_addr() operation
PCI: endpoint: test: Use pci_epc_mem_map/unmap()
PCI: endpoint: Update documentation
PCI: endpoint: Introduce pci_epc_mem_map()/unmap()
PCI: endpoint: Improve pci_epc_mem_alloc_addr()
PCI: endpoint: Introduce pci_epc_function_is_valid()
|
