summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-15can: m_can: m_can_stop(): set device to software init mode before closingFaiz Abbas
There might be some requests pending in the buffer when the interface close sequence occurs. In some devices, these pending requests might lead to the module not shutting down properly when m_can_clk_stop() is called. Therefore, move the device to init state before potentially powering it down. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200825055442.16994-1-faiz_abbas@ti.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: m_can: Fix freeing of can device from peripherialsDan Murphy
Fix leaking netdev device from peripherial devices. The call to allocate the netdev device is made from and managed by the peripherial. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: m_can: m_can_class_free_dev(): introduce new functionDan Murphy
This patch creates a common function that peripherials can call to free the netdev device when failures occur. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: m_can: m_can_handle_state_change(): fix state changeWu Bo
m_can_handle_state_change() is called with the new_state as an argument. In the switch statements for CAN_STATE_ERROR_ACTIVE, the comment and the following code indicate that a CAN_STATE_ERROR_WARNING is handled. This patch fixes this problem by changing the case to CAN_STATE_ERROR_WARNING. Signed-off-by: Wu Bo <wubo.oduw@gmail.com> Link: http://lore.kernel.org/r/20200129022330.21248-2-wubo.oduw@gmail.com Cc: Dan Murphy <dmurphy@ti.com> Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistrationMarc Kleine-Budde
Change the order in tcan4x5x_can_remove() to be the exact inverse of tcan4x5x_can_probe(). First m_can_class_unregister(), then power down the device. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: Dan Murphy <dmurphy@ti.com> Link: http://lore.kernel.org/r/20201019154233.1262589-10-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for ↵Marc Kleine-Budde
devm_regmap_init() This patch adds the missing error checking when initializing the regmap interface fails. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: Dan Murphy <dmurphy@ti.com> Link: http://lore.kernel.org/r/20201019154233.1262589-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPIEnric Balletbo i Serra
regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it. Instead depends on SPI and select REGMAP_SPI. Depending on REGMAP_SPI makes this driver only build if another driver already selected REGMAP_SPI, as the symbol can't be selected through the menu kernel configuration. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: http://lore.kernel.org/r/20200413141013.506613-1-enric.balletbo@collabora.com Reviewed-by: Dan Murphy <dmurphy@ti.com> Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: flexcan: fix failure handling of pm_runtime_get_sync()Zhang Qilong
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. If runtime of the device has error or device is in inaccessible state(or other error state), resume operation will fail. If we do not call put operation to decrease the reference, it will result in reference leak in the two functions flexcan_get_berr_counter() and flexcan_open(). Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we should fix it through adding pm_runtime_put_noidle(). Fixes: ca10989632d88 ("can: flexcan: implement can Runtime PM") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201108083000.2599705-1-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode ↵Marc Kleine-Budde
property comment In the patch d9b081e3fc4b ("can: flexcan: remove ack_grp and ack_bit handling from driver") the unused ack_grp and ack_bit were removed from the driver. However in the comment, the "req_bit" was accidentally removed, too. This patch adds back the "req_bit" bit. Fixes: d9b081e3fc4b ("can: flexcan: remove ack_grp and ack_bit handling from driver") Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: http://lore.kernel.org/r/20201014114810.2911135-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: peak_usb: fix potential integer overflow on shift of a intColin Ian King
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then assigned to a signed 64 bit variable. In the case where time_ref->adapter->ts_used_bits is 32 or more this can lead to an oveflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201105112427.40688-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to ↵Marc Kleine-Budde
can_put_echo_skb() The driver has to first fill the skb with data and then handle it to can_put_echo_skb(). This patch moves the can_put_echo_skb() down, right before sending the skb out via USB. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Link: https://lore.kernel.org/r/20201111221204.1639007-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: ti_hecc: Fix memleak in ti_hecc_probeZhang Qilong
In the error handling, we should goto the probe_exit_candev to free ndev to prevent memory leak. Fixes: dabf54dd1c63 ("can: ti_hecc: Convert TI HECC driver to DT only driver") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201114111708.3465543-1-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: dev: can_restart(): post buffer from the right contextAlejandro Concepcion Rodriguez
netif_rx() is meant to be called from interrupt contexts. can_restart() may be called by can_restart_work(), which is called from a worqueue, so it may run in process context. Use netif_rx_ni() instead. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Co-developed-by: Loris Fauster <loris.fauster@ttcontrol.com> Signed-off-by: Loris Fauster <loris.fauster@ttcontrol.com> Signed-off-by: Alejandro Concepcion Rodriguez <alejandro@acoro.eu> Link: https://lore.kernel.org/r/4e84162b-fb31-3a73-fa9a-9438b4bd5234@acoro.eu [mkl: use netif_rx_ni() instead of netif_rx_any_context()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: af_can: prevent potential access of uninitialized member in canfd_rcv()Anant Thazhemadam
In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: d4689846881d ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: af_can: prevent potential access of uninitialized member in can_rcv()Anant Thazhemadam
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: 8cb68751c115 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-13ipv6: Fix error path to cancel the meseageZhang Qilong
genlmsg_cancel() needs to be called in the error path of inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel the message. Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13ip_tunnels: Set tunnel option flag when tunnel metadata is presentYi-Hung Wei
Currently, we may set the tunnel option flag when the size of metadata is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function no matter the geneve option is present or not. As this may result in issues on the tunnel flags consumers, this patch fixes the issue. Related discussion: * https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u Fixes: 256c87c17c53 ("net: check tunnel option type in tunnel flags") Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: ethernet: ti: am65-cpts: update ret when ptp_clock is ERRORWang Qing
We always have to update the value of ret, otherwise the error value may be the previous one. Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver") Signed-off-by: Wang Qing <wangqing@vivo.com> [grygorii.strashko@ti.com: fix build warn, subj add fixes tag] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201112164541.3223-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: marvell: prestera: fix error return code in prestera_pci_probe()Wang Hai
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4c2703dfd7fa ("net: marvell: prestera: Add PCI interface support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu> Acked-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20201113113236.71678-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: phy: mscc: remove non-MACSec compatible phySteen Hegelund
Selecting VSC8575 as a MACSec PHY was not correct The relevant datasheet can be found here: - VSC8575: https://www.microchip.com/wwwproducts/en/VSC8575 History: v1 -> v2: - Corrected the sha in the "Fixes:" tag Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201113091116.1102450-1-steen.hegelund@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: Exempt multicast addresses from five-second neighbor lifetimeJeff Dike
Commit 58956317c8de ("neighbor: Improve garbage collection") guarantees neighbour table entries a five-second lifetime. Processes which make heavy use of multicast can fill the neighour table with multicast addresses in five seconds. At that point, neighbour entries can't be GC-ed because they aren't five seconds old yet, the kernel log starts to fill up with "neighbor table overflow!" messages, and sends start to fail. This patch allows multicast addresses to be thrown out before they've lived out their five seconds. This makes room for non-multicast addresses and makes messages to all addresses more reliable in these circumstances. Fixes: 58956317c8de ("neighbor: Improve garbage collection") Signed-off-by: Jeff Dike <jdike@akamai.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: ethernet: ti: cpsw: fix cpts irq after suspendGrygorii Strashko
Depending on the SoC/platform the CPSW can completely lose context after a suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of WR_C0_MISC_EN register, so CPTS IRQ will became disabled. Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is actually started. Fixes: 84ea9c0a95d7 ("net: ethernet: ti: cpsw: enable cpts irq") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201112111546.20343-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13Merge tag 'mac80211-for-net-2020-11-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A handful of fixes: * a use-after-free fix in rfkill * a memory leak fix in the mac80211 TX status path * some rate scaling fixes * a fix for the often-reported (by syzbot) sleeping in atomic issue with mac80211's station removal * tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: free sta in sta_info_insert_finish() on errors mac80211: minstrel: fix tx status processing corner case mac80211: minstrel: remove deferred sampling code mac80211: fix memory leak on filtered powersave frames rfkill: Fix use-after-free in rfkill_resume() ==================== Link: https://lore.kernel.org/r/20201113093421.24025-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13mac80211: free sta in sta_info_insert_finish() on errorsJohannes Berg
If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: stable@vger.kernel.org Fixes: dcd479e10a05 ("mac80211: always wind down STA state") Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12net: x25: Increase refcnt of "struct x25_neigh" in x25_rx_call_requestXie He
The x25_disconnect function in x25_subr.c would decrease the refcount of "x25->neighbour" (struct x25_neigh) and reset this pointer to NULL. However, the x25_rx_call_request function in af_x25.c, which is called when we receive a connection request, does not increase the refcount when it assigns the pointer. Fix this issue by increasing the refcount of "struct x25_neigh" in x25_rx_call_request. This patch fixes frequent kernel crashes when using AF_X25 sockets. Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: ethernet: mtk-star-emac: fix error return code in mtk_star_enable()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/1605180879-2573-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: ethernet: mtk-star-emac: return ok when xmit dropsVincent Stehlé
The ndo_start_xmit() method must return NETDEV_TX_OK if the DMA mapping fails, after freeing the socket buffer. Fix the mtk_star_netdev_start_xmit() function accordingly. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201112084833.21842-1-vincent.stehle@laposte.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net/ncsi: Fix netlink registrationJoel Stanley
If a user unbinds and re-binds a NC-SI aware driver the kernel will attempt to register the netlink interface at runtime. The structure is marked __ro_after_init so registration fails spectacularly at this point. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip ftgmac100 1e660000.ethernet: Using NCSI interface 8<--- cut here --- Unable to handle kernel paging request at virtual address 80a8f858 pgd = 8c768dd6 [80a8f858] *pgd=80a0841e(bad) Internal error: Oops: 80d [#1] SMP ARM CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51 Hardware name: Generic DT based system PC is at genl_register_family+0x1f8/0x6d4 LR is at 0xff26ffff pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153 sp : 8553bc80 ip : 81406244 fp : 8553bd04 r10: 8085d12c r9 : 80a8f73c r8 : 85739000 r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858 r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017 Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85524008 DAC: 00000051 Process sh (pid: 116, stack limit = 0x1f1988d6) ... Backtrace: [<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48) r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000 r4:8121c000 [<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210) r5:8121c400 r4:8121c000 [<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778) r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88 r4:85739000 [<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8) r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000 [<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514) r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10 Jakub pointed out that ncsi_register_dev is obviously broken, because there is only one family so it would never work if there was more than one ncsi netdev. Fix the crash by registering the netlink family once on boot, and drop the code to unregister it. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge tag 'net-5.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12Merge tag 'nfs-for-5.10-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Anna Schumaker: "Stable fixes: - Fix failure to unregister shrinker Other fixes: - Fix unnecessary locking to clear up some contention - Fix listxattr receive buffer size - Fix default mount options for nfsroot" * tag 'nfs-for-5.10-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Remove unnecessary inode lock in nfs_fsync_dir() NFS: Remove unnecessary inode locking in nfs_llseek_dir() NFS: Fix listxattr receive buffer size NFSv4.2: fix failure to unregister shrinker nfsroot: Default mount option should ask for built-in NFS version
2020-11-12Merge tag 'acpi-5.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These are mostly docmentation fixes and janitorial changes plus some new device IDs and a new quirk. Specifics: - Fix documentation regarding GPIO properties (Andy Shevchenko) - Fix spelling mistakes in ACPI documentation (Flavio Suligoi) - Fix white space inconsistencies in ACPI code (Maximilian Luz) - Fix string formatting in the ACPI Generic Event Device (GED) driver (Nick Desaulniers) - Add Intel Alder Lake device IDs to the ACPI drivers used by the Dynamic Platform and Thermal Framework (Srinivas Pandruvada) - Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI button driver (Hans de Goede)" * tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Support Alder Lake Documentation: ACPI: fix spelling mistakes ACPI: button: Add DMI quirk for Medion Akoya E2228T ACPI: GED: fix -Wformat ACPI: Fix whitespace inconsistencies ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name Documentation: firmware-guide: gpio-properties: Clarify initial output state Documentation: firmware-guide: gpio-properties: active_low only for GpioIo() Documentation: firmware-guide: gpio-properties: Fix factual mistakes
2020-11-12Merge tag 'pm-5.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Make the intel_pstate driver behave as expected when it operates in the passive mode with HWP enabled and the 'powersave' governor on top of it" * tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account cpufreq: Add strict_target to struct cpufreq_policy cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET cpufreq: Introduce governor flags
2020-11-12lan743x: fix use of uninitialized variableSven Van Asbroeck
When no devicetree is present, the driver will use an uninitialized variable. Fix by initializing this variable. Fixes: 902a66e08cea ("lan743x: correctly handle chips with internal PHY") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge branch 'net-udp-fix-fast-frag0-udp-gro'Jakub Kicinski
Alexander Lobakin says: ==================== net: udp: fix Fast/frag0 UDP GRO While testing UDP GSO fraglists forwarding through driver that uses Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order iperf packets: [ ID] Interval Transfer Bitrate Jitter [SUM] 0.0-40.0 sec 12106 datagrams received out-of-order Simple switch to napi_gro_receive() or any other method without frag0 shortcut completely resolved them. I've found two incorrect header accesses in GRO receive callback(s): - udp_hdr() (instead of udp_gro_udphdr()) that always points to junk in "fast" mode and could probably do this in "regular". This was the actual bug that caused all out-of-order delivers; - udp{4,6}_lib_lookup_skb() -> ip{,v6}_hdr() (instead of skb_gro_network_header()) that potentionally might return odd pointers in both modes. Each patch addresses one of these two issues. This doesn't cover a support for nested tunnels as it's out of the subject and requires more invasive changes. It will be handled separately in net-next series. Credits: Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Willem de Bruijn <willemb@google.com> Since v4 [0]: - split the fix into two logical ones (Willem); - replace ternaries with plain ifs to beautify the code (Jakub); - drop p->data part to reintroduce it later in abovementioned set. Since v3 [1]: - restore the original {,__}udp{4,6}_lib_lookup_skb() and use private versions of them inside GRO code (Willem). Since v2 [2]: - dropped redundant check introduced in v2 as it's performed right before (thanks to Eric); - udp_hdr() switched to data + off for skbs from list (also Eric); - fixed possible malfunction of {,__}udp{4,6}_lib_lookup_skb() with Fast/frag0 due to ip{,v6}_hdr() usage (Willem). Since v1 [3]: - added a NULL pointer check for "uh" as suggested by Willem. [0] https://lore.kernel.org/netdev/Ha2hou5eJPcblo4abjAqxZRzIl1RaLs2Hy0oOAgFs@cp4-web-036.plabs.ch [1] https://lore.kernel.org/netdev/MgZce9htmEtCtHg7pmWxXXfdhmQ6AHrnltXC41zOoo@cp7-web-042.plabs.ch [2] https://lore.kernel.org/netdev/0eaG8xtbtKY1dEKCTKUBubGiC9QawGgB3tVZtNqVdY@cp4-web-030.plabs.ch [3] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch ==================== Link: https://lore.kernel.org/r/hjGOh0iCOYyo1FPiZh6TMXcx3YCgNs1T1eGKLrDz8@cp4-web-037.plabs.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GROAlexander Lobakin
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the packet. While it's probably OK for non-frag0 paths, this helpers will also point to junk on Fast/frag0 GRO when all headers are located in frags. As a result, sk/skb lookup may fail or give wrong results. To support both GRO modes, skb_gro_network_header() might be used. To not modify original functions, add private versions of udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO. Present since the introduction of "application-level" UDP GRO in 4.7-rc1. Misc: replace totally unneeded ternaries with plain ifs. Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Suggested-by: Willem de Bruijn <willemb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12net: udp: fix UDP header access on Fast/frag0 UDP GROAlexander Lobakin
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's probably OK for non-frag0 paths (when all headers or even the entire frame are already in skb head), this inline points to junk when using Fast GRO (napi_gro_frags() or napi_gro_receive() with only Ethernet header in skb head and all the rest in the frags) and breaks GRO packet compilation and the packet flow itself. To support both modes, skb_gro_header_fast() + skb_gro_header_slow() are typically used. UDP even has an inline helper that makes use of them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr() to get rid of the out-of-order delivers. Present since the introduction of plain UDP GRO in 5.0-rc1. Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-11-10 This series contains updates to i40e and igc drivers and the MAINTAINERS file. Slawomir fixes updating VF MAC addresses to fix various issues related to reporting and setting of these addresses for i40e. Dan Carpenter fixes a possible used before being initialized issue for i40e. Vinicius fixes reporting of netdev stats for igc. Tony updates repositories for Intel Ethernet Drivers. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: MAINTAINERS: Update repositories for Intel Ethernet Drivers igc: Fix returning wrong statistics i40e, xsk: uninitialized variable in i40e_clean_rx_irq_zc() i40e: Fix MAC address setting for a VF via Host/VM ==================== Link: https://lore.kernel.org/r/20201111001955.533210-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12devlink: Avoid overwriting port attributes of registered portParav Pandit
Cited commit in fixes tag overwrites the port attributes for the registered port. Avoid such error by checking registered flag before setting attributes. Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12vrf: Fix fast path output packet handling with async Netfilter rulesMartin Willi
VRF devices use an optimized direct path on output if a default qdisc is involved, calling Netfilter hooks directly. This path, however, does not consider Netfilter rules completing asynchronously, such as with NFQUEUE. The Netfilter okfn() is called for asynchronously accepted packets, but the VRF never passes that packet down the stack to send it out over the slave device. Using the slower redirect path for this seems not feasible, as we do not know beforehand if a Netfilter hook has asynchronously completing rules. Fix the use of asynchronously completing Netfilter rules in OUTPUT and POSTROUTING by using a special completion function that additionally calls dst_output() to pass the packet down the stack. Also, slightly adjust the use of nf_reset_ct() so that is called in the asynchronous case, too. Fixes: dcdd43c41e60 ("net: vrf: performance improvements for IPv4") Fixes: a9ec54d1b0cd ("net: vrf: performance improvements for IPv6") Signed-off-by: Martin Willi <martin@strongswan.org> Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12NFS: Remove unnecessary inode lock in nfs_fsync_dir()Trond Myklebust
nfs_inc_stats() is already thread-safe, and there are no other reasons to hold the inode lock here. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12NFS: Remove unnecessary inode locking in nfs_llseek_dir()Trond Myklebust
Remove the contentious inode lock, and instead provide thread safety using the file->f_lock spinlock. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12NFS: Fix listxattr receive buffer sizeChuck Lever
Certain NFSv4.2/RDMA tests fail with v5.9-rc1. rpcrdma_convert_kvec() runs off the end of the rl_segments array because rq_rcv_buf.tail[0].iov_len holds a very large positive value. The resultant kernel memory corruption is enough to crash the client system. Callers of rpc_prepare_reply_pages() must reserve an extra XDR_UNIT in the maximum decode size for a possible XDR pad of the contents of the xdr_buf's pages. That guarantees the allocated receive buffer will be large enough to accommodate the usual contents plus that XDR pad word. encode_op_hdr() cannot add that extra word. If it does, xdr_inline_pages() underruns the length of the tail iovec. Fixes: 3e1f02123fba ("NFSv4.2: add client side XDR handling for extended attributes") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12NFSv4.2: fix failure to unregister shrinkerJ. Bruce Fields
We forgot to unregister the nfs4_xattr_large_entry_shrinker. That leaves the global list of shrinkers corrupted after unload of the nfs module, after which possibly unrelated code that calls register_shrinker() or unregister_shrinker() gets a BUG() with "supervisor write access in kernel mode". And similarly for the nfs4_xattr_large_entry_lru. Reported-by: Kris Karas <bugs-a17@moonlit-rail.com> Tested-By: Kris Karas <bugs-a17@moonlit-rail.com> Fixes: 95ad37f90c33 "NFSv4.2: add client side xattr caching." Signed-off-by: J. Bruce Fields <bfields@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12Merge branches 'acpi-scan', 'acpi-misc', 'acpi-button' and 'acpi-dptf'Rafael J. Wysocki
* acpi-scan: ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name * acpi-misc: ACPI: GED: fix -Wformat ACPI: Fix whitespace inconsistencies * acpi-button: ACPI: button: Add DMI quirk for Medion Akoya E2228T * acpi-dptf: ACPI: DPTF: Support Alder Lake
2020-11-12mac80211: minstrel: fix tx status processing corner caseFelix Fietkau
Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12mac80211: minstrel: remove deferred sampling codeFelix Fietkau
Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12mac80211: fix memory leak on filtered powersave framesFelix Fietkau
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Fixes: 3318111cf63d ("mac80211: reduce duplication in tx status functions") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12rfkill: Fix use-after-free in rfkill_resume()Claire Chang
If a device is getting removed or reprobed during resume, use-after-free might happen. For example, h5_btrtl_resume() schedules a work queue for device reprobing, which of course requires removal first. If the removal happens in parallel with the device_resume() and wins the race to acquire device_lock(), removal may remove the device from the PM lists and all, but device_resume() is already running and will continue when the lock can be acquired, thus calling rfkill_resume(). During this, if rfkill_set_block() is then called after the corresponding *_unregister() and kfree() are called, there will be an use-after-free in hci_rfkill_set_block(): BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth] ... Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c dump_stack+0xbc/0x12c print_address_description+0x88/0x4b0 __kasan_report+0x144/0x168 kasan_report+0x10/0x18 check_memory_region+0x19c/0x1ac __kasan_check_write+0x18/0x24 hci_rfkill_set_block+0x58/0xc0 [bluetooth] rfkill_set_block+0x9c/0x120 rfkill_resume+0x34/0x70 dpm_run_callback+0xf0/0x1f4 device_resume+0x210/0x22c Fix this by checking rfkill->registered in rfkill_resume(). device_del() in rfkill_unregister() requires device_lock() and the whole rfkill_resume() is also protected by the same lock via device_resume(), we can make sure either the rfkill->registered is false before rfkill_resume() starts or the rfkill device won't be unregistered before rfkill_resume() returns. As async_resume() holds a reference to the device, at this level there can be no use-after-free; only in the user that doesn't expect this scenario. Fixes: 8589086f4efd ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume") Signed-off-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201110084908.219088-1-tientzu@chromium.org [edit commit message for clarity and add more info provided later] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-11cosa: Add missing kfree in error path of cosa_writeWang Hai
If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a corresponding kfree() in exception handling. Thus add kfree() for this function implementation. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: switch to the kernel.org patchwork instanceJakub Kicinski
Move to the kernel.org patchwork instance, it has significantly lower latency for accessing from Europe and the US. Other quirks include the reply bot. Link: https://lore.kernel.org/r/20201110035120.642746-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 13:50:25 +0000