| Age | Commit message (Collapse) | Author |
|---|
|
* for-next/ftrace:
ftrace: arm64: remove static ftrace
ftrace: arm64: move from REGS to ARGS
ftrace: abstract DYNAMIC_FTRACE_WITH_ARGS accesses
ftrace: rename ftrace_instruction_pointer_set() -> ftrace_regs_set_instruction_pointer()
ftrace: pass fregs to arch_ftrace_set_direct_caller()
|
|
* for-next/fpsimd:
arm64/fpsimd: Make kernel_neon_ API _GPL
|
|
* for-next/ffa:
firmware: arm_ffa: Move comment before the field it is documenting
firmware: arm_ffa: Move constants to header file
|
|
* for-next/errata:
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
arm64: Add Cortex-715 CPU part definition
|
|
* for-next/dynamic-scs:
arm64: implement dynamic shadow call stack for Clang
scs: add support for dynamic shadow call stacks
arm64: unwind: add asynchronous unwind tables to kernel and modules
|
|
* for-next/cpufeature:
kselftest/arm64: Add SVE 2.1 to hwcap test
arm64/hwcap: Add support for SVE 2.1
kselftest/arm64: Add FEAT_RPRFM to the hwcap test
arm64/hwcap: Add support for FEAT_RPRFM
kselftest/arm64: Add FEAT_CSSC to the hwcap selftest
arm64/hwcap: Add support for FEAT_CSSC
arm64: Enable data independent timing (DIT) in the kernel
|
|
* for-next/asm-const:
arm64: alternative: constify alternative_has_feature_* argument
arm64: jump_label: mark arguments as const to satisfy asm constraints
|
|
* for-next/acpi:
ACPI: APMT: Fix kerneldoc and indentation
ACPI: Enable FPDT on arm64
arm_pmu: acpi: handle allocation failure
arm_pmu: rework ACPI probing
arm_pmu: factor out PMU matching
arm_pmu: acpi: factor out PMU<->CPU association
ACPI/IORT: Update SMMUv3 DeviceID support
ACPI: ARM Performance Monitoring Unit Table (APMT) initial support
|
|
This is consistent with the other comments in the struct.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221116170335.2341003-3-qperret@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FF-A function IDs and error codes will be needed in the hypervisor too,
so move to them to the header file where they can be shared. Rename the
version constants with an "FFA_" prefix so that they are less likely
to clash with other code in the tree.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221116170335.2341003-2-qperret@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The build test robot pointer out that there's a build failure when:
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n
... due to some mismatched ifdeffery, some of which checks
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, and some of which checks
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, leading to some missing definitions expected
by the core code when CONFIG_DYNAMIC_FTRACE=n and consequently
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n.
There's really not much point in supporting CONFIG_DYNAMIC_FTRACE=n (AKA
static ftrace). All supported toolchains allow us to implement
DYNAMIC_FTRACE, distributions all prefer DYNAMIC_FTRACE, and both
powerpc and s390 removed support for static ftrace in commits:
0c0c52306f4792a4 ("powerpc: Only support DYNAMIC_FTRACE not static")
5d6a0163494c78ad ("s390/ftrace: enforce DYNAMIC_FTRACE if FUNCTION_TRACER is selected")
... and according to Steven, static ftrace is only supported on x86 to
allow testing that the core code still functions in this configuration.
Given that, let's simplify matters by removing arm64's support for
static ftrace. This avoids the problem originally reported, and leaves
us with less code to maintain.
Fixes: 26299b3f6ba2 ("ftrace: arm64: move from REGS to ARGS")
Link: https://lore.kernel.org/r/202211212249.livTPi3Y-lkp@intel.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221122163624.1225912-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If a Cortex-A715 cpu sees a page mapping permissions change from executable
to non-executable, it may corrupt the ESR_ELx and FAR_ELx registers, on the
next instruction abort caused by permission fault.
Only user-space does executable to non-executable permission transition via
mprotect() system call which calls ptep_modify_prot_start() and ptep_modify
_prot_commit() helpers, while changing the page mapping. The platform code
can override these helpers via __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION.
Work around the problem via doing a break-before-make TLB invalidation, for
all executable user space mappings, that go through mprotect() system call.
This overrides ptep_modify_prot_start() and ptep_modify_prot_commit(), via
defining HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION on the platform thus giving
an opportunity to intercept user space exec mappings, and do the necessary
TLB invalidation. Similar interceptions are also implemented for HugeTLB.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221116140915.356601-3-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the CPU Partnumbers for the new Arm designs.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20221116140915.356601-2-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This commit replaces arm64's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This removes some overhead and complexity, and
removes some latent issues with inconsistent presentation of struct
pt_regs (which can only be reliably saved/restored at exception
boundaries).
FTRACE_WITH_REGS has been supported on arm64 since commit:
3b23e4991fb66f6d ("arm64: implement ftrace with regs")
As noted in the commit message, the major reasons for implementing
FTRACE_WITH_REGS were:
(1) To make it possible to use the ftrace graph tracer with pointer
authentication, where it's necessary to snapshot/manipulate the LR
before it is signed by the instrumented function.
(2) To make it possible to implement LIVEPATCH in future, where we need
to hook function entry before an instrumented function manipulates
the stack or argument registers. Practically speaking, we need to
preserve the argument/return registers, PC, LR, and SP.
Neither of these need a struct pt_regs, and only require the set of
registers which are live at function call/return boundaries. Our calling
convention is defined by "Procedure Call Standard for the Arm® 64-bit
Architecture (AArch64)" (AKA "AAPCS64"), which can currently be found
at:
https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst
Per AAPCS64, all function call argument and return values are held in
the following GPRs:
* X0 - X7 : parameter / result registers
* X8 : indirect result location register
* SP : stack pointer (AKA SP)
Additionally, ad function call boundaries, the following GPRs hold
context/return information:
* X29 : frame pointer (AKA FP)
* X30 : link register (AKA LR)
... and for ftrace we need to capture the instrumented address:
* PC : program counter
No other GPRs are relevant, as none of the other arguments hold
parameters or return values:
* X9 - X17 : temporaries, may be clobbered
* X18 : shadow call stack pointer (or temorary)
* X19 - X28 : callee saved
This patch implements FTRACE_WITH_ARGS for arm64, only saving/restoring
the minimal set of registers necessary. This is always sufficient to
manipulate control flow (e.g. for live-patching) or to manipulate
function arguments and return values.
This reduces the necessary stack usage from 336 bytes for pt_regs down
to 112 bytes for ftrace_regs + 32 bytes for two frame records, freeing
up 188 bytes. This could be reduced further with changes to the
unwinder.
As there is no longer a need to save different sets of registers for
different features, we no longer need distinct `ftrace_caller` and
`ftrace_regs_caller` trampolines. This allows the trampoline assembly to
be simpler, and simplifies code which previously had to handle the two
trampolines.
I've tested this with the ftrace selftests, where there are no
unexpected failures.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly necessary
in the core ftrace code.
This patch adds new ftrace_regs_{get,set}_*() helpers which can be used
to manipulate ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y,
these can always be used on any ftrace_regs, and when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n these can be used when regs are
available. A new ftrace_regs_has_args(fregs) helper is added which code
can use to check when these are usable.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ftrace_regs_set_instruction_pointer()
In subsequent patches we'll add a sew of ftrace_regs_{get,set}_*()
helpers. In preparation, this patch renames
ftrace_instruction_pointer_set() to
ftrace_regs_set_instruction_pointer().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly
necessary in the core ftrace code.
This patch changes the prototype of arch_ftrace_set_direct_caller() to
take ftrace_regs rather than pt_regs, and moves the extraction of the
pt_regs into arch_ftrace_set_direct_caller().
On x86, arch_ftrace_set_direct_caller() can be used even when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n, and <linux/ftrace.h> defines
struct ftrace_regs. Due to this, it's necessary to define
arch_ftrace_set_direct_caller() as a macro to avoid using an incomplete
type. I've also moved the body of arch_ftrace_set_direct_caller() after
the CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y defineidion of struct
ftrace_regs.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add missing kerneldoc and fix alignment on one of the arguments of
apmt_add_platform_device function.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Link: https://lore.kernel.org/r/20221111234323.16182-1-bwicaksono@nvidia.com
[will: Fixed up additional indentation issue]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FPDT provides some boot timing records useful for analyzing
parts of the UEFI boot stack. Given the existing code works
on arm64, and allows reading the values without utilizing
/dev/mem it seems like a good idea to turn it on.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221109174720.203723-1-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement dynamic shadow call stack support on Clang, by parsing the
unwind tables at init time to locate all occurrences of PACIASP/AUTIASP
instructions, and replacing them with the shadow call stack push and pop
instructions, respectively.
This is useful because the overhead of the shadow call stack is
difficult to justify on hardware that implements pointer authentication
(PAC), and given that the PAC instructions are executed as NOPs on
hardware that doesn't, we can just replace them without breaking
anything. As PACIASP/AUTIASP are guaranteed to be paired with respect to
manipulations of the return address, replacing them 1:1 with shadow call
stack pushes and pops is guaranteed to result in the desired behavior.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-4-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to allow arches to use code patching to conditionally emit the
shadow stack pushes and pops, rather than always taking the performance
hit even on CPUs that implement alternatives such as stack pointer
authentication on arm64, add a Kconfig symbol that can be set by the
arch to omit the SCS codegen itself, without otherwise affecting how
support code for SCS and compiler options (for register reservation, for
instance) are emitted.
Also, add a static key and some plumbing to omit the allocation of
shadow call stack for dynamic SCS configurations if SCS is disabled at
runtime.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Enable asynchronous unwind table generation for both the core kernel as
well as modules, and emit the resulting .eh_frame sections as init code
so we can use the unwind directives for code patching at boot or module
load time.
This will be used by dynamic shadow call stack support, which will rely
on code patching rather than compiler codegen to emit the shadow call
stack push and pop instructions.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add coverage for FEAT_SVE2p1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_SVE2p1 introduces a number of new SVE instructions. Since there is no
new architectural state added kernel support is simply a new hwcap which
lets userspace know that the feature is supported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-6-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the newly added instruction is in the HINT space we can't reasonably
test for it actually being present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_RPRFM adds a new range prefetch hint within the existing PRFM space
for range prefetch hinting. Add a new hwcap to allow userspace to discover
support for the new instruction.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add FEAT_CSSC to the set of features checked by the hwcap selftest.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
FEAT_CSSC adds a number of new instructions usable to optimise common short
sequences of instructions, add a hwcap indicating that the feature is
available and can be used by userspace.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently for reasons lost in the mists of time the kernel_neon_ APIs are
EXPORT_SYMBOL() but the general policy for floating point usage is that it
should be GPL only given the non-standard runtime environment that holds
while it is in use and PCS impacts when code is compiled for FP usage.
Given the limited existing deployment of non-GPL modules for arm64 and the
fact that other architectures like x86 already make their equivalent
functions GPL only this is not expected to be disruptive to existing users.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221107170747.276910-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The ARM architecture revision v8.4 introduces a data independent timing
control (DIT) which can be set at any exception level, and instructs the
CPU to avoid optimizations that may result in a correlation between the
execution time of certain instructions and the value of the data they
operate on.
The DIT bit is part of PSTATE, and is therefore context switched as
usual, given that it becomes part of the saved program state (SPSR) when
taking an exception. We have also defined a hwcap for DIT, and so user
space can discover already whether or nor DIT is available. This means
that, as far as user space is concerned, DIT is wired up and fully
functional.
In the kernel, however, we never bothered with DIT: we disable at it
boot (i.e., INIT_PSTATE_EL1 has DIT cleared) and ignore the fact that we
might run with DIT enabled if user space happened to set it.
Currently, we have no idea whether or not running privileged code with
DIT disabled on a CPU that implements support for it may result in a
side channel that exposes privileged data to unprivileged user space
processes, so let's be cautious and just enable DIT while running in the
kernel if supported by all CPUs.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Adam Langley <agl@google.com>
Link: https://lore.kernel.org/all/YwgCrqutxmX0W72r@gmail.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221107172400.1851434-1-ardb@kernel.org
[will: Removed cpu_has_dit() as per Mark's suggestion on the list]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
One of the failure paths in the arm_pmu ACPI code is missing an early
return, permitting a NULL pointer dereference upon a memory allocation
failure.
Add the missing return.
Fixes: fe40ffdb7656 ("arm_pmu: rework ACPI probing")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221108093725.1239563-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The current ACPI PMU probing logic tries to associate PMUs with CPUs
when the CPU is first brought online, in order to handle late hotplug,
though PMUs are only registered during early boot, and so for late
hotplugged CPUs this can only associate the CPU with an existing PMU.
We tried to be clever and the have the arm_pmu_acpi_cpu_starting()
callback allocate a struct arm_pmu when no matching instance is found,
in order to avoid duplication of logic. However, as above this doesn't
do anything useful for late hotplugged CPUs, and this requires us to
allocate memory in an atomic context, which is especially problematic
for PREEMPT_RT, as reported by Valentin and Pierre.
This patch reworks the probing to detect PMUs for all online CPUs in the
arm_pmu_acpi_probe() function, which is more aligned with how DT probing
works. The arm_pmu_acpi_cpu_starting() callback only tries to associate
CPUs with an existing arm_pmu instance, avoiding the problem of
allocating in atomic context.
Note that as we didn't previously register PMUs for late-hotplugged
CPUs, this change doesn't result in a loss of existing functionality,
though we will now warn when we cannot associate a CPU with a PMU.
This change allows us to pull the hotplug callback registration into the
arm_pmu_acpi_probe() function, as we no longer need the callbacks to be
invoked shortly after probing the boot CPUs, and can register it without
invoking the calls.
For the moment the arm_pmu_acpi_init() initcall remains to register the
SPE PMU, though in future this should probably be moved elsewhere (e.g.
the arm64 ACPI init code), since this doesn't need to be tied to the
regular CPU PMU code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20210810134127.1394269-2-valentin.schneider@arm.com/
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220912155105.1443303-1-pierre.gondois@arm.com/
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20220930111844.1522365-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A subsequent patch will rework the ACPI probing of PMUs, and we'll need
to match a CPU with a known cpuid in two separate paths.
Factor out the matching logic into a helper function so that it can be
reused.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20220930111844.1522365-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A subsequent patch will rework the ACPI probing of PMUs, and we'll need
to associate a CPU with a PMU in two separate paths.
Factor out the association logic into a helper function so that it can
be reused.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20220930111844.1522365-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Inspired by x86 commit 864b435514b2("x86/jump_label: Mark arguments as
const to satisfy asm constraints"), constify alternative_has_feature_*
argument to satisfy asm constraints. And Steven in [1] also pointed
out that "The "i" constraint needs to be a constant."
Tested with building a simple external kernel module with "O0".
Before the patch, got similar gcc warnings and errors as below:
In file included from <command-line>:
In function ‘alternative_has_feature_likely’,
inlined from ‘system_capabilities_finalized’ at
arch/arm64/include/asm/cpufeature.h:440:9,
inlined from ‘arm64_preempt_schedule_irq’ at
arch/arm64/kernel/entry-common.c:264:6:
include/linux/compiler_types.h:285:33: warning:
‘asm’ operand 0 probably does not match constraints
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
arch/arm64/include/asm/alternative-macros.h:232:9:
note: in expansion of macro ‘asm_volatile_goto’
232 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:285:33: error:
impossible constraint in ‘asm’
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
arch/arm64/include/asm/alternative-macros.h:232:9:
note: in expansion of macro ‘asm_volatile_goto’
232 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
After the patch, the simple external test kernel module is built fine
with "-O0".
[1]https://lore.kernel.org/all/20210212094059.5f8d05e8@gandalf.local.home/
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221006075542.2658-3-jszhang@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Inspired by x86 commit 864b435514b2("x86/jump_label: Mark arguments as
const to satisfy asm constraints"), mark arch_static_branch()'s and
arch_static_branch_jump()'s arguments as const to satisfy asm
constraints. And Steven in [1] also pointed out that "The "i"
constraint needs to be a constant."
Tested with building a simple external kernel module with "O0".
[1]https://lore.kernel.org/all/20210212094059.5f8d05e8@gandalf.local.home/
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221006075542.2658-2-jszhang@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
IORT E.e now allows SMMUv3 nodes to describe the DeviceID for MSIs
independently of wired GSIVs, where the previous oddly-restrictive
definition meant that an SMMU without PRI support had to provide a
DeviceID even if it didn't support MSIs either. Support this, with
the usual temporary flag definition while the real one is making
its way through ACPICA.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/4b3e2ead4f392d1a47a7528da119d57918e5d806.1664392886.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ARM Performance Monitoring Unit Table describes the properties of PMU
support in ARM-based system. The APMT table contains a list of nodes,
each represents a PMU in the system that conforms to ARM CoreSight PMU
architecture. The properties of each node include information required
to access the PMU (e.g. MMIO base address, interrupt number) and also
identification. For more detailed information, please refer to the
specification below:
* APMT: https://developer.arm.com/documentation/den0117/latest
* ARM Coresight PMU:
https://developer.arm.com/documentation/ihi0091/latest
The initial support adds the detection of APMT table and generic
infrastructure to create platform devices for ARM CoreSight PMUs.
Similar to IORT the root pointer of APMT is preserved during runtime
and each PMU platform device is given a pointer to the corresponding
APMT node.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220929002834.32664-1-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:
- Commit 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into
macro") resulted in regulator undercount when disabling regulators.
Revert it.
- The thermal subsystem rework caused the scmi driver to no longer
register with the thermal subsystem because index values no longer
match. To fix the problem, the scmi driver now directly registers
with the thermal subsystem, no longer through the hwmon core"
* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (pmbus) Add regulator supply into macro"
hwmon: (scmi) Register explicitly with Thermal Framework
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add new Intel CPU models
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see
the real pt_regs definition and not only the forward declaration
* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add several Intel server CPU model numbers
x86/tdx: Panic on bad configs that #VE on "private" memory access
x86/tdx: Prepare for using "INFO" call for a second purpose
x86/syscall: Include asm/ptrace.h in syscall_wrapper header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"
* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
|
|
Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
iterating channels, including for oplock breaks when leases are
disabled"
* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free on the link name
cifs: avoid unnecessary iteration of tcp sessions
cifs: always iterate smb sessions using primary channel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull `lTracing fixes for 6.1-rc3:
- Fixed NULL pointer dereference in the ring buffer wait-waiters code
for machines that have less CPUs than what nr_cpu_ids returns.
The buffer array is of size nr_cpu_ids, but only the online CPUs get
initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
tracing/fprobe: Fix to check whether fprobe is registered correctly
fprobe: Check rethook_alloc() return in rethook initialization
kprobe: reverse kp->flags when arm_kprobe failed
ftrace: Fix use-after-free for dynamic ftrace_ops
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
|
