summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-27Merge remote-tracking branches 'asoc/fix/adau1761', 'asoc/fix/fsl', ↵Mark Brown
'asoc/fix/intel', 'asoc/fix/s6000' and 'asoc/fix/sgtl5000' into asoc-linus
2014-10-27ALSA: hda/realtek - New SSID for Headset quirkKailang Yang
It is lite version of AIO machine(0x0626). The audio layout of this machine was similar with SSID 0x0626. The audio was same as commit ad8ff99e6beb8708b0bdefd9d5658324e90200f0. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27microblaze: Wire up bpf syscallMichal Simek
Add new bpf syscall. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-27ALSA: ad1889: Fix probable mask then right shift defectsJoe Perches
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 ↵Takashi Sakamoto
Rack FW Terratec PHASE 88 rack fw has two registers for source of clock, one is for internal/external, and another is for wordclock/spdif for external. When clock source is internal, information in another register has no meaning. Thus it must be ignored, but current implementation decodes it. This causes over-indexing reference to labels. Reported-by: András Murányi <muranyia@gmail.com> Tested-by: András Murányi <muranyia@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27microblaze: Fix IO space breakage after of_pci_range_to_resource() changeMichal Simek
Commit 0b0b0893d49b "of/pci: Fix the conversion of IO ranges into IO resources" changed the behaviour of of_pci_range_to_resource(). The issue is described here: "powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() change" (sha1: aeba3731b150188685225b510886f1370d8814de) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-27microblaze: Fix missing NR_CPUS in menuconfigMichal Simek
The time Kconfig expects that NR_CPUS is defined. This patch remove this config warning: "kernel/time/Kconfig:163:warning: range is invalid" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-26net: napi_reuse_skb() should check pfmemallocEric Dumazet
Do not reuse skb if it was pfmemalloc tainted, otherwise future frame might be dropped anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26Merge branch 'mellanox'David S. Miller
Eli Cohen says: ==================== irq sync fixes This two patch series fixes a race where an interrupt handler could access a freed memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26net/mlx4_core: Call synchronize_irq() before freeing EQ bufferEli Cohen
After moving the EQ ownership to software effectively destroying it, call synchronize_irq() to ensure that any handler routines running on other CPU cores finish execution. Only then free the EQ buffer. The same thing is done when we destroy a CQ which is one of the sources generating interrupts. In the case of CQ we want to avoid completion handlers on a CQ that was destroyed. In the case we do the same to avoid receiving asynchronous events after the EQ has been destroyed and its buffers freed. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26net/mlx5_core: Call synchronize_irq() before freeing EQ bufferEli Cohen
After destroying the EQ, the object responsible for generating interrupts, call synchronize_irq() to ensure that any handler routines running on other CPU cores finish execution. Only then free the EQ buffer. This patch solves a very rare case when we get panic on driver unload. The same thing is done when we destroy a CQ which is one of the sources generating interrupts. In the case of CQ we want to avoid completion handlers on a CQ that was destroyed. In the case we do the same to avoid receiving asynchronous events after the EQ has been destroyed and its buffers freed. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27usb: chipidea: Fix oops when removing the ci_hdrc moduleTorsten Fleischer
The call of 'kfree(ci->hw_bank.regmap)' in ci_hdrc_remove() sometimes causes a kernel oops when removing the ci_hdrc module. Since there is no separate memory allocated for the ci->hw_bank.regmap array, there is no need to free it. Cc: v3.14+ <stable@@vger.kernel.org> Signed-off-by: Torsten Fleischer <to-fleischer@t-online.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-26Linux 3.18-rc2v3.18-rc2Linus Torvalds
2014-10-26ARM/ARM64: arch-timer: fix arch_timer_probed logicMarc Zyngier
Commit c387f07e6205 (clocksource: arm_arch_timer: Discard unavailable timers correctly) changed the way the driver makes sure both the memory and system-register timers have been probed before finalizing the probing. There is a interesting flaw in this logic that leads to this final step never to be executed. Things seems to work pretty well until something actually needs the data that is produced during this final stage. For example, KVM explodes on the first run of a guest when executed on a platform that has both memory and sysreg nodes (Juno, for example). Just fix the damned logic, and enjoy booting VMs again. Tested on a Juno system. Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Christoffer Dall <christoffer.dall@linaro.org> Reported-by: Riku Voipio <riku.voipio@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-10-26Merge tag 'armsoc-for-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size
2014-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "overlayfs merge + leak fix for d_splice_alias() failure exits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory fix inode leaks on d_splice_alias() failure exits fs: limit filesystem stacking depth overlay: overlay filesystem documentation overlayfs: implement show_options overlayfs: add statfs support overlay filesystem shmem: support RENAME_WHITEOUT ext4: support RENAME_WHITEOUT vfs: add RENAME_WHITEOUT vfs: add whiteout support vfs: export check_sticky() vfs: introduce clone_private_mount() vfs: export __inode_permission() to modules vfs: export do_splice_direct() to modules vfs: add i_op->dentry_open()
2014-10-26futex: Fix a race condition between REQUEUE_PI and task deathBrian Silverman
free_pi_state and exit_pi_state_list both clean up futex_pi_state's. exit_pi_state_list takes the hb lock first, and most callers of free_pi_state do too. requeue_pi doesn't, which means free_pi_state can free the pi_state out from under exit_pi_state_list. For example: task A | task B exit_pi_state_list | pi_state = | curr->pi_state_list->next | | futex_requeue(requeue_pi=1) | // pi_state is the same as | // the one in task A | free_pi_state(pi_state) | list_del_init(&pi_state->list) | kfree(pi_state) list_del_init(&pi_state->list) | Move the free_pi_state calls in requeue_pi to before it drops the hb locks which it's already holding. [ tglx: Removed a pointless free_pi_state() call and the hb->lock held debugging. The latter comes via a seperate patch ] Signed-off-by: Brian Silverman <bsilver16384@gmail.com> Cc: austin.linux@gmail.com Cc: darren@dvhart.com Cc: peterz@infradead.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1414282837-23092-1-git-send-email-bsilver16384@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-26futex: Mention key referencing differences between shared and private futexesDavidlohr Bueso
Update our documentation as of fix 76835b0ebf8 (futex: Ensure get_futex_key_refs() always implies a barrier). Explicitly state that we don't do key referencing for private futexes. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Matteo Franchin <Matteo.Franchin@arm.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: http://lkml.kernel.org/r/1414121220.817.0.camel@linux-t7sj.site Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-25Merge tag 'imx-fixes-3.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-25drivers: net: xgene: Rewrite buggy loop in xgene_enet_ecc_init()Geert Uytterhoeven
drivers/net/ethernet/apm/xgene/xgene_enet_sgmac.c: In function ‘xgene_enet_ecc_init’: drivers/net/ethernet/apm/xgene/xgene_enet_sgmac.c:126: warning: ‘data’ may be used uninitialized in this function Depending on the arbitrary value on the stack, the loop may terminate too early, and cause a bogus -ENODEV failure. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25i40e: _MASK vs _SHIFT typo in i40e_handle_mdd_event()Dan Carpenter
We accidentally mask by the _SHIFT variable. It means that "event" is always zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25macvlan: fix a race on port dismantle and possible skb leaksEric Dumazet
We need to cancel the work queue after rcu grace period, otherwise it can be rescheduled by incoming packets. We need to purge queue if some skbs are still in it. We can use __skb_queue_head_init() variant in macvlan_process_broadcast() Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 412ca1550cbec ("macvlan: Move broadcasts into a work queue") Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25tcp: md5: do not use alloc_percpu()Eric Dumazet
percpu tcp_md5sig_pool contains memory blobs that ultimately go through sg_set_buf(). -> sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); This requires that whole area is in a physically contiguous portion of memory. And that @buf is not backed by vmalloc(). Given that alloc_percpu() can use vmalloc() areas, this does not fit the requirements. Replace alloc_percpu() by a static DEFINE_PER_CPU() as tcp_md5sig_pool is small anyway, there is no gain to dynamically allocate it. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 765cf9976e93 ("tcp: md5: remove one indirection level in tcp_md5sig_pool") Reported-by: Crestez Dan Leonard <cdleonard@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25Merge branch 'xen-netback'David S. Miller
David Vrabel says: ==================== xen-netback: guest Rx queue drain and stall fixes This series fixes two critical xen-netback bugs. 1. Netback may consume all of host memory by queuing an unlimited number of skb on the internal guest Rx queue. This behaviour is guest triggerable. 2. Carrier flapping under high traffic rates which reduces performance. The first patch is a prerequite. Removing support for frontends with feature-rx-notify makes it easier to reason about the correctness of netback since it no longer has to support this outdated and broken mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25xen-netback: reintroduce guest Rx stall detectionDavid Vrabel
If a frontend not receiving packets it is useful to detect this and turn off the carrier so packets are dropped early instead of being queued and drained when they expire. A to-guest queue is stalled if it doesn't have enough free slots for a an extended period of time (default 60 s). If at least one queue is stalled, the carrier is turned off (in the expectation that the other queues will soon stall as well). The carrier is only turned on once all queues are ready. When the frontend connects, all the queues start in the stalled state and only become ready once the frontend queues enough Rx requests. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25xen-netback: fix unlimited guest Rx internal queue and carrier flappingDavid Vrabel
Netback needs to discard old to-guest skb's (guest Rx queue drain) and it needs detect guest Rx stalls (to disable the carrier so packets are discarded earlier), but the current implementation is very broken. 1. The check in hard_start_xmit of the slot availability did not consider the number of packets that were already in the guest Rx queue. This could allow the queue to grow without bound. The guest stops consuming packets and the ring was allowed to fill leaving S slot free. Netback queues a packet requiring more than S slots (ensuring that the ring stays with S slots free). Netback queue indefinately packets provided that then require S or fewer slots. 2. The Rx stall detection is not triggered in this case since the (host) Tx queue is not stopped. 3. If the Tx queue is stopped and a guest Rx interrupt occurs, netback will consider this an Rx purge event which may result in it taking the carrier down unnecessarily. It also considers a queue with only 1 slot free as unstalled (even though the next packet might not fit in this). The internal guest Rx queue is limited by a byte length (to 512 Kib, enough for half the ring). The (host) Tx queue is stopped and started based on this limit. This sets an upper bound on the amount of memory used by packets on the internal queue. This allows the estimatation of the number of slots for an skb to be removed (it wasn't a very good estimate anyway). Instead, the guest Rx thread just waits for enough free slots for a maximum sized packet. skbs queued on the internal queue have an 'expires' time (set to the current time plus the drain timeout). The guest Rx thread will detect when the skb at the head of the queue has expired and discard expired skbs. This sets a clear upper bound on the length of time an skb can be queued for. For a guest being destroyed the maximum time needed to wait for all the packets it sent to be dropped is still the drain timeout (10 s) since it will not be sending new packets. Rx stall detection is reintroduced in a later commit. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25xen-netback: make feature-rx-notify mandatoryDavid Vrabel
Frontends that do not provide feature-rx-notify may stall because netback depends on the notification from frontend to wake the guest Rx thread (even if can_queue is false). This could be fixed but feature-rx-notify was introduced in 2006 and I am not aware of any frontends that do not implement this. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-25vdso: don't require 64-bit math in standalone testJeff Mahoney
The use of 64-bit math on i386 causes build failures: vdso_standalone_test_x86.c:(.text+0x101): undefined reference to `__umoddi3' vdso_standalone_test_x86.c:(.text+0x12d): undefined reference to `__udivdi3' Commit adb19fb66ee (Documentation: add makefiles for more targets) is now building this by default, so it's failing the kernel build entirely. Switching the declaration from uint64_t to time_t does the right thing and handles the x32 case automatically. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-10-25ARM: dts: imx28-evk: Let i2c0 run at 100kHzFabio Estevam
Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25ARM: i.MX6: Fix "emi" clock name typoSteve Longerbeam
Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25clockevents: Prevent shift out of boundsThomas Gleixner
Andrey reported that on a kernel with UBSan enabled he found: UBSan: Undefined behaviour in ../kernel/time/clockevents.c:75:34 I guess it should be 1ULL here instead of 1U: (!ismax || evt->mult <= (1U << evt->shift))) That's indeed the correct solution because shift might be 32. Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-25posix-timers: Fix stack info leak in timer_create()Mathias Krause
If userland creates a timer without specifying a sigevent info, we'll create one ourself, using a stack local variable. Particularly will we use the timer ID as sival_int. But as sigev_value is a union containing a pointer and an int, that assignment will only partially initialize sigev_value on systems where the size of a pointer is bigger than the size of an int. On such systems we'll copy the uninitialized stack bytes from the timer_create() call to userland when the timer actually fires and we're going to deliver the signal. Initialize sigev_value with 0 to plug the stack info leak. Found in the PaX patch, written by the PaX Team. Fixes: 5a9fa7307285 ("posix-timers: kill ->it_sigev_signo and...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Cc: <stable@vger.kernel.org> # v2.6.28+ Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-25Merge tag 'iio-fixes-for-3.18a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 3.18 cycle. * ad5933 - fix a null pointer dereference due to an old change that prevents different channels being registered for the buffer and used for sysfs interfaces. * ad5933 - Drop a bonus _raw from attribute names. * st-sensors - Makes sure the correct number of elements are copied when filling a local buffer copy. * mxs-lradc - Disable clocks in a failure path during probe so they aren't left running.
2014-10-25Merge tag 'fixes-for-v3.18-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.18-rc2 Here's the first set of fixes for v3.18-rc cycle. It includes a whole bunch of bug fixes related to USB20CV and USB30CV when running on DWC3 and MUSB. After this series, we have clean chapter 9 and MSC tests for all gadget drivers. We also have a new PCI ID for Intel Braswell platform so they can use DWC3 out-of-the-box. A regression on functionfs wrt quirk_ep_out_aligned_size flag has also been fixed. DWC2 got a couple of fixes for the gadget role. The first of which fixes rmmod followed by modprobe while the second makes sure to disable PHYs before killing the regulators powering them. These are the most important fixes worth mentioning, there are a few other minor fixes as well. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-24Input: wm97xx - adapt parameters to tosa touchscreen.Dmitry Eremin-Solenikov
Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24overlayfs: embed middle into overlay_readdir_dataAl Viro
same story... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: embed root into overlay_readdir_dataAl Viro
no sense having it a pointer - all instances have it pointing to local variable in the same stack frame Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: make ovl_cache_entry->name an array instead of pointerAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: don't hold ->i_mutex over opening the real directoryAl Viro
just use it to serialize the assignment Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544Hans de Goede
These models need i8042.notimeout, otherwise the touchpad will not work. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: stmpe-keypad - fix valid key line bitmaskLinus Walleij
The bitmask comment says it will enable GPIO 8-14 and 16-20 for keypad use, but it actually enables GPIO 8-11 and 13-20 due to a bit error. Instead of masking of the "hole" at GPIO 12 (which is used for keypad output 4) mask of the proper "hole" at GPIO 15. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: soc_button_array - update calls to gpiod_get*()Alexandre Courbot
Add the new flags argument to calls of (devm_)gpiod_get*(). Currently both forms (with or without the flags argument) are valid thanks to transitional macros in <linux/gpio/consumer.h>. These macros will be removed once all consumers are updated and the flags argument will become compulsory. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24ftrace: Fix checking of trampoline ftrace_ops in finding trampolineSteven Rostedt (Red Hat)
When modifying code, ftrace has several checks to make sure things are being done correctly. One of them is to make sure any code it modifies is exactly what it expects it to be before it modifies it. In order to do so with the new trampoline logic, it must be able to find out what trampoline a function is hooked to in order to see if the code that hooks to it is what's expected. The logic to find the trampoline from a record (accounting descriptor for a function that is hooked) needs to only look at the "old_hash" of an ops that is being modified. The old_hash is the list of function an ops is hooked to before its update. Since a record would only be pointing to an ops that is being modified if it was already hooked before. Currently, it can pick a modified ops based on its new functions it will be hooked to, and this picks the wrong trampoline and causes the check to fail, disabling ftrace. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> ftrace: squash into ordering of ops for modification
2014-10-24ftrace: Set ops->old_hash on modifying what an ops hooks toSteven Rostedt (Red Hat)
The code that checks for trampolines when modifying function hooks tests against a modified ops "old_hash". But the ops old_hash pointer is not being updated before the changes are made, making it possible to not find the right hash to the callback and possibly causing ftrace to break in accounting and disable itself. Have the ops set its old_hash before the modifying takes place. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-24i386/audit: stop scribbling on the stack frameEric Paris
git commit b4f0d3755c5e9cc86292d5fd78261903b4f23d4a was very very dumb. It was writing over %esp/pt_regs semi-randomly on i686 with the expected "system can't boot" results. As noted in: https://bugs.freedesktop.org/show_bug.cgi?id=85277 This patch stops fscking with pt_regs. Instead it sets up the registers for the call to __audit_syscall_entry in the most obvious conceivable way. It then does just a tiny tiny touch of magic. We need to get what started in PT_EDX into 0(%esp) and PT_ESI into 4(%esp). This is as easy as a pair of pushes. After the call to __audit_syscall_entry all we need to do is get that now useless junk off the stack (pair of pops) and reload %eax with the original syscall so other stuff can keep going about it's business. Reported-by: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Eric Paris <eparis@redhat.com> Link: http://lkml.kernel.org/r/1414037043-30647-1-git-send-email-eparis@redhat.com Cc: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-10-24Merge tag 'v3.18-rc1' into x86/urgentH. Peter Anvin
Reason: Need to apply audit patch on top of v3.18-rc1. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-10-24ptp: restore the makefile for building the test program.Richard Cochran
This patch brings back the makefile called testptp.mk which was removed in commit adb19fb66eee (Documentation: add makefiles for more targets). While the idea of that commit was to improve build coverage of the examples, the new Makefile is unable to cross compile the testptp program. In contrast, the deleted makefile was able to do this just fine. This patch fixes the regression by restoring the original makefile. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "This is the first round of fixes and tying up loose ends for MIPS. - plenty of fixes for build errors in specific obscure configurations - remove redundant code on the Lantiq platform - removal of a useless SEAD I2C driver that was causing a build issue - fix an earlier TLB exeption handler fix to also work on Octeon. - fix ISA level dependencies in FPU emulator's instruction decoding. - don't hardcode kernel command line in Octeon software emulator. - fix an earlier fix for the Loondson 2 clock setting" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: SEAD3: Fix I2C device registration. MIPS: SEAD3: Nuke PIC32 I2C driver. MIPS: ftrace: Fix a microMIPS build problem MIPS: MSP71xx: Fix build error MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled MIPS: Prevent compiler warning from cop2_{save,restore} MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle MIPS: idle: Remove leftover __pastwait symbol and its references MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds MIPS: ptrace.h: Add a missing include MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present MIPS: Octeon: Remove special case for simulator command line. MIPS: tlbex: Properly fix HUGE TLB Refill exception handler MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge pci: pci-lantiq: remove duplicate check on resource MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions
2014-10-24Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - enable 48-bit VA space now that KVM has been fixed, together with a couple of fixes for pgd allocation alignment and initial memblock current_limit. There is still a dependency on !ARM_SMMU which needs to be updated as it uses the page table manipulation macros of the host kernel - eBPF fixes following changes/conflicts during the merging window - Compat types affecting compat_elf_prpsinfo - Compilation error on UP builds - ASLR fix when /proc/sys/kernel/randomize_va_space == 0 - DT definitions for CLCD support on ARMv8 model platform * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix memblock current_limit with 64K pages and 48-bit VA arm64: ASLR: Don't randomise text when randomise_va_space == 0 arm64: vexpress: Add CLCD support to the ARMv8 model platform arm64: Fix compilation error on UP builds Documentation/arm64/memory.txt: fix typo net: bpf: arm64: minor fix of type in jited arm64: bpf: add 'load 64-bit immediate' instruction arm64: bpf: add 'shift by register' instructions net: bpf: arm64: address randomize and write protect JIT code arm64: mm: Correct fixmap pagetable types arm64: compat: fix compat types affecting struct compat_elf_prpsinfo arm64: Align less than PAGE_SIZE pgds naturally arm64: Allow 48-bits VA space without ARM_SMMU
2014-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull two sparc fixes from David Miller: 1) Fix boots with gcc-4.9 compiled sparc64 kernels. 2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on futexes used in transparent hugepage areas. It's really idiotic to have a weak symbolled fallback that just returns zero, and causes this kind of bug. There should be no backup implementation and the link should fail if the architecture fails to provide __get_user_pages_fast() and supports transparent hugepages. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Implement __get_user_pages_fast(). sparc64: Fix register corruption in top-most kernel stack frame during boot.
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 04:51:55 +0000