| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
"Add a SGX_IOC_VEPC_REMOVE ioctl to the /dev/sgx_vepc virt interface
with which EPC pages can be put back into their uninitialized state
without having to reopen /dev/sgx_vepc, which could not be possible
anymore after startup due to security policies"
* tag 'x86_sgx_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx/virt: implement SGX_IOC_VEPC_REMOVE ioctl
x86/sgx/virt: extract sgx_vepc_remove_page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Export sev_es_ghcb_hv_call() so that HyperV Isolation VMs can use it
too
- Non-urgent fixes and cleanups
* tag 'x86_sev_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV
x86/sev: Allow #VC exceptions on the VC2 stack
x86/sev: Fix stack type check in vc_switch_off_ist()
x86/sme: Use #define USE_EARLY_PGTABLE_L5 in mem_encrypt_identity.c
x86/sev: Carve out HV call's return value verification
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 changes from Borislav Petkov:
- Use the proper interface for the job: get_unaligned() instead of
memcpy() in the insn decoder
- A randconfig build fix
* tag 'x86_misc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Use get_unaligned() instead of memcpy()
x86/Kconfig: Fix an unused variable error in dell-smm-hwmon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Start checking a CPUID bit on AMD Zen3 which states that the CPU
clears the segment base when a null selector is written. Do the
explicit detection on older CPUs, zen2 and hygon specifically, which
have the functionality but do not advertize the CPUID bit. Factor in
the presence of a hypervisor underneath the kernel and avoid doing
the explicit check there which the HV might've decided to not
advertize for migration safety reasons, or similar.
- Add support for a new X86 CPU vendor: VORTEX. Needed for whitelisting
those CPUs in the hardware vulnerabilities detection
- Force the compiler to use rIP-relative addressing in the fallback
path of static_cpu_has(), in order to avoid unnecessary register
pressure
* tag 'x86_cpu_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Fix migration safety with X86_BUG_NULL_SEL
x86/CPU: Add support for Vortex CPUs
x86/umip: Downgrade warning messages to debug loglevel
x86/asm: Avoid adding register pressure for the init case in static_cpu_has()
x86/asm: Add _ASM_RIP() macro for x86-64 (%rip) suffix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
"The usual round of random minor fixes and cleanups all over the place"
* tag 'x86_cleanups_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Makefile: Remove unneeded whitespaces before tabs
x86/of: Kill unused early_init_dt_scan_chosen_arch()
x86: Fix misspelled Kconfig symbols
x86/Kconfig: Remove references to obsolete Kconfig symbols
x86/smp: Remove unnecessary assignment to local var freq_scale
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build fix from Borislav Petkov:
- A single fix to hdimage when using older versions of mtools
* tag 'x86_build_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix make hdimage with older versions of mtools
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Get rid of a bunch of function pointers used in MCA land in favor of
normal functions. This is in preparation of making the MCA code
noinstr-aware
- When the kernel copies data from user addresses and it encounters a
machine check, a SIGBUS is sent to that process. Change this action
to either an -EFAULT which is returned to the user or a short write,
making the recovery action a lot more user-friendly
* tag 'ras_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Sort mca_config members to get rid of unnecessary padding
x86/mce: Get rid of the ->quirk_no_way_out() indirect call
x86/mce: Get rid of msr_ops
x86/mce: Get rid of machine_check_vector
x86/mce: Get rid of the mce_severity function pointer
x86/mce: Drop copyin special case for #MC
x86/mce: Change to not send SIGBUS error during copy from user
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"The last EFI pull request which is forwarded through the tip tree, for
v5.16. From now on, Ard will be sending stuff directly.
Disable EFI runtime services by default on PREEMPT_RT, while adding
the ability to re-enable them on demand by passing efi=runtime on the
command line"
* tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow efi=runtime
efi: Disable runtime services on RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"A small pile of EDAC updates which the autumn wind blew my way. :)
- amd64_edac: Add support for three-rank interleaving mode which is
present on AMD zen2 servers
- The usual fixes and cleanups all over EDAC land"
* tag 'edac_updates_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
EDAC/ti: Remove redundant error messages
EDAC/amd64: Handle three rank interleaving mode
EDAC/mc_sysfs: Print MC-scope sysfs counters unsigned
EDAC/al_mc: Make use of the helper function devm_add_action_or_reset()
EDAC/mc: Replace strcpy(), sprintf() and snprintf() with strscpy() or scnprintf()
|
|
I had missed a semantic conflict between commit d389a4a81155 ("mm: Add
folio flag manipulation functions") from the folio tree, and commit
eac96c3efdb5 ("mm: filemap: check if THP has hwpoisoned subpage for PMD
page fault") that added a new set of page flags.
My build tests had too many options enabled, which hid this issue. But
if you didn't have MEMORY_FAILURE or TRANSPARENT_HUGEPAGE enabled, you'd
end up with build errors like this:
include/linux/page-flags.h:806:29: error: macro "PAGEFLAG_FALSE" requires 2 arguments, but only 1 given
806 | PAGEFLAG_FALSE(HasHWPoisoned)
| ^
due to the missing lowercase name used for folio function naming.
Fixes: 49f8275c7d92 ("Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Without it, kernel crashes in map_delete_elem(), as reported
by syzbot.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 72c97067 P4D 72c97067 PUD 1e20c067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 6518 Comm: syz-executor196 Not tainted 5.15.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffffc90002bafcb8 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 1ffff92000575f9f RCX: 0000000000000000
RDX: 1ffffffff1327aba RSI: 0000000000000000 RDI: ffff888025a30c00
RBP: ffffc90002baff08 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff818525d8 R11: 0000000000000000 R12: ffffffff8993d560
R13: ffff888025a30c00 R14: ffff888024bc0000 R15: 0000000000000000
FS: 0000555557491300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000070189000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
map_delete_elem kernel/bpf/syscall.c:1220 [inline]
__sys_bpf+0x34f1/0x5ee0 kernel/bpf/syscall.c:4606
__do_sys_bpf kernel/bpf/syscall.c:4719 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4717 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4717
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
Fixes: 9330986c0300 ("bpf: Add bloom filter map implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211031171353.4092388-1-eric.dumazet@gmail.com
|
|
Joanne Koong says:
====================
There are 3 patches in this patchset:
1/3 - Bloom filter naming fixups (kernel/bpf/bloom_filter.c)
2/3 - Add alignment padding for map_extra, rearrange fields in
bpf_map struct to consolidate holes
3/3 - Bloom filter tests (prog_tests/bloom_filter_map):
Add test for successful userspace calls, some refactoring to
use bpf_create_map instead of bpf_create_map_xattr
v1 -> v2:
* In prog_tests/bloom_filter_map: remove unneeded line break,
also change the inner_map_test to use bpf_create_map instead
of bpf_create_map_xattr.
* Add acked-bys to commit messages
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch has two changes:
1) Adds a new function "test_success_cases" to test
successfully creating + adding + looking up a value
in a bloom filter map from the userspace side.
2) Use bpf_create_map instead of bpf_create_map_xattr in
the "test_fail_cases" and test_inner_map to make the
code look cleaner.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211029224909.1721024-4-joannekoong@fb.com
|
|
This patch makes 2 changes regarding alignment padding
for the "map_extra" field.
1) In the kernel header, "map_extra" and "btf_value_type_id"
are rearranged to consolidate the hole.
Before:
struct bpf_map {
...
u32 max_entries; /* 36 4 */
u32 map_flags; /* 40 4 */
/* XXX 4 bytes hole, try to pack */
u64 map_extra; /* 48 8 */
int spin_lock_off; /* 56 4 */
int timer_off; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
u32 id; /* 64 4 */
int numa_node; /* 68 4 */
...
bool frozen; /* 117 1 */
/* XXX 10 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
...
struct work_struct work; /* 144 72 */
/* --- cacheline 3 boundary (192 bytes) was 24 bytes ago --- */
struct mutex freeze_mutex; /* 216 144 */
/* --- cacheline 5 boundary (320 bytes) was 40 bytes ago --- */
u64 writecnt; /* 360 8 */
/* size: 384, cachelines: 6, members: 26 */
/* sum members: 354, holes: 2, sum holes: 14 */
/* padding: 16 */
/* forced alignments: 2, forced holes: 1, sum forced holes: 10 */
} __attribute__((__aligned__(64)));
After:
struct bpf_map {
...
u32 max_entries; /* 36 4 */
u64 map_extra; /* 40 8 */
u32 map_flags; /* 48 4 */
int spin_lock_off; /* 52 4 */
int timer_off; /* 56 4 */
u32 id; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
int numa_node; /* 64 4 */
...
bool frozen /* 113 1 */
/* XXX 14 bytes hole, try to pack */
/* --- cacheline 2 boundary (128 bytes) --- */
...
struct work_struct work; /* 144 72 */
/* --- cacheline 3 boundary (192 bytes) was 24 bytes ago --- */
struct mutex freeze_mutex; /* 216 144 */
/* --- cacheline 5 boundary (320 bytes) was 40 bytes ago --- */
u64 writecnt; /* 360 8 */
/* size: 384, cachelines: 6, members: 26 */
/* sum members: 354, holes: 1, sum holes: 14 */
/* padding: 16 */
/* forced alignments: 2, forced holes: 1, sum forced holes: 14 */
} __attribute__((__aligned__(64)));
2) Add alignment padding to the bpf_map_info struct
More details can be found in commit 36f9814a494a ("bpf: fix uapi hole
for 32 bit compat applications")
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211029224909.1721024-3-joannekoong@fb.com
|
|
This patch has two changes in the kernel bloom filter map
implementation:
1) Change the names of map-ops functions to include the
"bloom_map" prefix.
As Martin pointed out on a previous patchset, having generic
map-ops names may be confusing in tracing and in perf-report.
2) Drop the "& 0xF" when getting nr_hash_funcs, since we
already ascertain that no other bits in map_extra beyond the
first 4 bits can be set.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211029224909.1721024-2-joannekoong@fb.com
|
|
Hou Tao says:
====================
Hi,
Currently the test of BPF STRUCT_OPS depends on the specific bpf
implementation (e.g, tcp_congestion_ops), but it can not cover all
basic functionalities (e.g, return value handling), so introduce
a dummy BPF STRUCT_OPS for test purpose.
Instead of loading a userspace-implemeted bpf_dummy_ops map into
kernel and calling the specific function by writing to sysfs provided
by bpf_testmode.ko, only loading bpf_dummy_ops related prog into
kernel and calling these prog by bpf_prog_test_run(). The latter
is more flexible and has no dependency on extra kernel module.
Now the return value handling is supported by test_1(...) ops,
and passing multiple arguments is supported by test_2(...) ops.
If more is needed, test_x(...) ops can be added afterwards.
Comments are always welcome.
Regards,
Hou
Change Log:
v4:
* add Acked-by tags in patch 1~4
* patch 2: remove unncessary comments and update commit message
accordingly
* patch 4: remove unnecessary nr checking in dummy_ops_init_args()
v3: https://www.spinics.net/lists/bpf/msg48303.html
* rebase on bpf-next
* address comments for Martin, mainly include: merge patch 3 &
patch 4 in v2, fix names of btf ctx access check helpers,
handle CONFIG_NET, fix leak in dummy_ops_init_args(), and
simplify bpf_dummy_init()
* patch 4: use a loop to check args in test_dummy_multiple_args()
v2: https://www.spinics.net/lists/bpf/msg47948.html
* rebase on bpf-next
* add test_2(...) ops to test the passing of multiple arguments
* a new patch (patch #2) is added to factor out ctx access helpers
* address comments from Martin & Andrii
v1: https://www.spinics.net/lists/bpf/msg46787.html
RFC: https://www.spinics.net/lists/bpf/msg46117.html
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Running a BPF_PROG_TYPE_STRUCT_OPS prog for dummy_st_ops::test_N()
through bpf_prog_test_run(). Four test cases are added:
(1) attach dummy_st_ops should fail
(2) function return value of bpf_dummy_ops::test_1() is expected
(3) pointer argument of bpf_dummy_ops::test_1() works as expected
(4) multiple arguments passed to bpf_dummy_ops::test_2() are correct
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211025064025.2567443-5-houtao1@huawei.com
|
|
Currently the test of BPF STRUCT_OPS depends on the specific bpf
implementation of tcp_congestion_ops, but it can not cover all
basic functionalities (e.g, return value handling), so introduce
a dummy BPF STRUCT_OPS for test purpose.
Loading a bpf_dummy_ops implementation from userspace is prohibited,
and its only purpose is to run BPF_PROG_TYPE_STRUCT_OPS program
through bpf(BPF_PROG_TEST_RUN). Now programs for test_1() & test_2()
are supported. The following three cases are exercised in
bpf_dummy_struct_ops_test_run():
(1) test and check the value returned from state arg in test_1(state)
The content of state is copied from userspace pointer and copied back
after calling test_1(state). The user pointer is saved in an u64 array
and the array address is passed through ctx_in.
(2) test and check the return value of test_1(NULL)
Just simulate the case in which an invalid input argument is passed in.
(3) test multiple arguments passing in test_2(state, ...)
5 arguments are passed through ctx_in in form of u64 array. The first
element of array is userspace pointer of state and others 4 arguments
follow.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211025064025.2567443-4-houtao1@huawei.com
|
|
Factor out two helpers to check the read access of ctx for raw tp
and BTF function. bpf_tracing_ctx_access() is used to check
the read access to argument is valid, and bpf_tracing_btf_ctx_access()
checks whether the btf type of argument is valid besides the checking
of argument read. bpf_tracing_btf_ctx_access() will be used by the
following patch.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211025064025.2567443-3-houtao1@huawei.com
|
|
Factor out a helper bpf_struct_ops_prepare_trampoline() to prepare
trampoline for BPF_PROG_TYPE_STRUCT_OPS prog. It will be used by
.test_run callback in following patch.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211025064025.2567443-2-houtao1@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from
explicit error codes to a boolean fail/success as that's all what the
calling code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX
support:
- Distangle the public header maze and remove especially the
misnomed kitchen sink internal.h which is despite it's name
included all over the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime
by flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code
into the FPU core which removes the number of exports and avoids
adding even more export when AMX has to be supported in KVM.
This also removes duplicated code which was of course
unnecessary different and incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new
fpstate container and just switching the buffer pointer from the
user space buffer to the KVM guest buffer when entering
vcpu_run() and flipping it back when leaving the function. This
cuts the memory requirements of a vCPU for FPU buffers in half
and avoids pointless memory copy operations.
This also solves the so far unresolved problem of adding AMX
support because the current FPU buffer handling of KVM inflicted
a circular dependency between adding AMX support to the core and
to KVM. With the new scheme of switching fpstate AMX support can
be added to the core code without affecting KVM.
- Replace various variables with proper data structures so the
extra information required for adding dynamically enabled FPU
features (AMX) can be added in one place
- Add AMX (Advanced Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR
(MSR_XFD) which allows to trap the (first) use of an AMX related
instruction, which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra
8K or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and
cleared on exec(). The permission policy of the kernel is
restricted to sigaltstack size validation, but the syscall
obviously allows further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2)
which takes granted permissions and the potentially resulting
larger signal frame into account. This mechanism can also be used
to enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support
was added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the
use of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have
been disabled in XCR0. If permission has been granted, then a new
fpstate which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler
sends SIGSEGV to the task. That's not elegant, but unavoidable as
the other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused
by unexpected memory allocation failures is not a fundamentally
new concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is
disarmed for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with
the same life time rules as the FPU register state itself. The
mechanism is keyed off with a static key which is default
disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
CPUs the overhead is limited by comparing the tasks XFD value
with a per CPU shadow variable to avoid redundant MSR writes. In
case of switching from a AMX using task to a non AMX using task
or vice versa, the extra MSR write is obviously inevitable.
All other places which need to be aware of the variable feature
sets and resulting variable sizes are not affected at all because
they retrieve the information (feature set, sizes) unconditonally
from the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support
is in the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which
has not been caught in review and testing right away was restricted
to AMX enabled systems, which is completely irrelevant for anyone
outside Intel and their early access program. There might be dragons
lurking as usual, but so far the fine grained refactoring has held up
and eventual yet undetected fallout is bisectable and should be
easily addressable before the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity
to follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for
inclusion into 5.16-rc1
* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
Documentation/x86: Add documentation for using dynamic XSTATE features
x86/fpu: Include vmalloc.h for vzalloc()
selftests/x86/amx: Add context switch test
selftests/x86/amx: Add test cases for AMX state management
x86/fpu/amx: Enable the AMX feature in 64-bit mode
x86/fpu: Add XFD handling for dynamic states
x86/fpu: Calculate the default sizes independently
x86/fpu/amx: Define AMX state components and have it used for boot-time checks
x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
x86/fpu/xstate: Add fpstate_realloc()/free()
x86/fpu/xstate: Add XFD #NM handler
x86/fpu: Update XFD state where required
x86/fpu: Add sanity checks for XFD
x86/fpu: Add XFD state to fpstate
x86/msr-index: Add MSRs for XFD
x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
x86/fpu: Reset permission and fpstate on exec()
x86/fpu: Prepare fpu_clone() for dynamically enabled features
x86/fpu/signal: Prepare for variable sigframe length
x86/signal: Use fpu::__state_user_size for sigalt stack validation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/apic update from Thomas Gleixner:
"A single commit which reduces cache misses in __x2apic_send_IPI_mask()
significantly by converting x86_cpu_to_logical_apicid() to an array
instead of using per CPU storage.
This reduces the cost for a full broadcast on a dual socket system
with 256 CPUs from 33 down to 11 microseconds"
* tag 'x86-apic-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Reduce cache line misses in __x2apic_send_IPI_mask()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timers and timekeeping updates:
- No core updates
- No new clocksource/event driver
- A large rework of the ARM architected timer driver to prepare for
the support of the upcoming ARMv8.6 support
- Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
- Address a namespace collison in the ARC sp804 timer driver"
* tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Select TIMER_OF
clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM
clocksource/drivers/arch_arm_timer: Move workaround synchronisation around
clocksource/drivers/arm_arch_timer: Fix masking for high freq counters
clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface
clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations
clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code
clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue
clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names
clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
clocksource/drivers/arc_timer: Eliminate redefined macro error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Improve retpoline code patching by separating it from alternatives
which reduces memory footprint and allows to do better optimizations
in the actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization
code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces
runtime on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the
hypercall page.
* tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
bpf,x86: Respect X86_FEATURE_RETPOLINE*
bpf,x86: Simplify computing label offsets
x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
x86/alternative: Add debug prints to apply_retpolines()
x86/alternative: Try inline spectre_v2=retpoline,amd
x86/alternative: Handle Jcc __x86_indirect_thunk_\reg
x86/alternative: Implement .retpoline_sites support
x86/retpoline: Create a retpoline thunk array
x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h
x86/asm: Fixup odd GEN-for-each-reg.h usage
x86/asm: Fix register order
x86/retpoline: Remove unused replacement symbols
objtool,x86: Replace alternatives with .retpoline_sites
objtool: Shrink struct instruction
objtool: Explicitly avoid self modifying code in .altinstr_replacement
objtool: Classify symbols
objtool: Support pv_opsindirect calls for noinstr
x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays
x86/xen: Mark xen_force_evtchn_callback() noinstr
x86/xen: Make irq_disable() noinstr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Core:
- Allow ftrace to instrument parts of the perf core code
- Add a new mem_hops field to perf_mem_data_src which allows to
represent intra-node/package or inter-node/off-package details to
prepare for next generation systems which have more hieararchy
within the node/pacakge level.
Tools:
- Update for the new mem_hops field in perf_mem_data_src
Arch:
- A set of constraints fixes for the Intel uncore PMU
- The usual set of small fixes and improvements for x86 and PPC"
* tag 'perf-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings
powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
tools/perf: Add mem_hops field in perf_mem_data_src structure
perf: Add mem_hops field in perf_mem_data_src structure
perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line
perf/core: Allow ftrace for functions in kernel/event/core.c
perf/x86: Add new event for AUX output counter index
perf/x86: Add compiler barrier after updating BTS
perf/x86/intel/uncore: Fix Intel SPR M3UPI event constraints
perf/x86/intel/uncore: Fix Intel SPR M2PCIE event constraints
perf/x86/intel/uncore: Fix Intel SPR IIO event constraints
perf/x86/intel/uncore: Fix Intel SPR CHA event constraints
perf/x86/intel/uncore: Fix Intel ICX IIO event constraints
perf/x86/intel/uncore: Fix invalid unit check
perf/x86/intel/uncore: Support extra IMC channel on Ice Lake server
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race
between cpuset and __sched_setscheduler() introduced a new lock
dependency which is now triggered. Break the lock dependency chain
by moving the priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues
simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place"
* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
h8300: Fix linux/irqchip.h include mess
dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
MIPS: irq: Avoid an unused-variable error
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The updates this time are more under the hood and enhancing existing
features (subpage with compression and zoned namespaces).
Performance related:
- misc small inode logging improvements (+3% throughput, -11% latency
on sample dbench workload)
- more efficient directory logging: bulk item insertion, less tree
searches and locking
- speed up bulk insertion of items into a b-tree, which is used when
logging directories, when running delayed items for directories
(fsync and transaction commits) and when running the slow path
(full sync) of an fsync (bulk creation run time -4%, deletion -12%)
Core:
- continued subpage support
- make defragmentation work
- make compression write work
- zoned mode
- support ZNS (zoned namespaces), zone capacity is number of
usable blocks in each zone
- add dedicated block group (zoned) for relocation, to prevent
out of order writes in some cases
- greedy block group reclaim, pick the ones with least usable
space first
- preparatory work for send protocol updates
- error handling improvements
- cleanups and refactoring
Fixes:
- lockdep warnings
- in show_devname callback, on seeding device
- device delete on loop device due to conversions to workqueues
- fix deadlock between chunk allocation and chunk btree modifications
- fix tracking of missing device count and status"
* tag 'for-5.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (140 commits)
btrfs: remove root argument from check_item_in_log()
btrfs: remove root argument from add_link()
btrfs: remove root argument from btrfs_unlink_inode()
btrfs: remove root argument from drop_one_dir_item()
btrfs: clear MISSING device status bit in btrfs_close_one_device
btrfs: call btrfs_check_rw_degradable only if there is a missing device
btrfs: send: prepare for v2 protocol
btrfs: fix comment about sector sizes supported in 64K systems
btrfs: update device path inode time instead of bd_inode
fs: export an inode_update_time helper
btrfs: fix deadlock when defragging transparent huge pages
btrfs: sysfs: convert scnprintf and snprintf to sysfs_emit
btrfs: make btrfs_super_block size match BTRFS_SUPER_INFO_SIZE
btrfs: update comments for chunk allocation -ENOSPC cases
btrfs: fix deadlock between chunk allocation and chunk btree modifications
btrfs: zoned: use greedy gc for auto reclaim
btrfs: check-integrity: stop storing the block device name in btrfsic_dev_state
btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls
btrfs: add a btrfs_get_dev_args_from_path helper
btrfs: handle device lookup with btrfs_dev_lookup_args
...
|
|
Commit ccaa66c8dd27 reinstated the kmap/kunmap that had been dropped in
commit 8c945d32e604 ("btrfs: compression: drop kmap/kunmap from lzo").
However, it seems to have done so incorrectly due to the change not
reverting cleanly, and lzo_decompress_bio() ended up not having a
matching "kunmap()" to the "kmap()" that was put back.
Also, any assert that the page pointer is not NULL should be before the
kmap() of said pointer, since otherwise you'd just oops in the kmap()
before the assert would even trigger.
I noticed this when trying to verify my btrfs merge, and things not
adding up. I'm doing this fixup before re-doing my merge, because this
commit needs to also be backported to 5.15 (after verification from the
btrfs people).
Fixes: ccaa66c8dd27 ("Revert 'btrfs: compression: drop kmap/kunmap from lzo'")
Cc: David Sterba <dsterba@suse.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
"Fix ->i_blocks truncation issue caused by wrong 32bit mask"
* tag 'exfat-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix incorrect loading of i_blocks for large files
|
|
In 1394 OHCI specification, Isochronous Receive DMA context has several
modes. One of mode is 'BufferFill' and Linux FireWire stack uses it to
receive isochronous packets for multiple isochronous channel as
FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL.
The mode is not used by in-kernel driver, while it's available for
userspace. The character device driver in firewire-core includes
cast of function callback for the mode since the type of callback
function is different from the other modes. The case is inconvenient
to effort of Control Flow Integrity builds due to
-Wcast-function-type warning.
This commit removes the cast. A static helper function is newly added
to initialize isochronous context for the mode. The helper function
arranges isochronous context to assign specific callback function
after call of existent kernel API. It's noticeable that the number of
isochronous channel, speed, and the size of header are not required for
the mode. The helper function is used for the mode by character device
driver instead of direct call of existent kernel API.
The same goal can be achieved (in the ioctl_create_iso_context function)
without this helper function as follows:
- Call the fw_iso_context_create function passing NULL to the callback
parameter.
- Then setting the context->callback.sc or context->callback.mc
variables based on the a->type value.
However using the helper function created in this patch makes code more
clear and declarative. This way avoid the call to a function with one
purpose to achieved another one.
Co-developed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Co-developed-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Testeb-by: Takashi Sakamoto<o-takashi@sakamocchi.jp>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"There are some new features available for this cycle. Firstly, EROFS
LZMA algorithm support, specifically called MicroLZMA, is available as
an option for embedded devices, LiveCDs and/or as the secondary
auxiliary compression algorithm besides the primary algorithm in one
file.
In order to better support the LZMA fixed-sized output compression,
especially for 4KiB pcluster size (which has lowest memory pressure
thus useful for memory-sensitive scenarios), Lasse introduced a new
LZMA header/container format called MicroLZMA to minimize the original
LZMA1 header (for example, we don't need to waste 4-byte dictionary
size and another 8-byte uncompressed size, which can be calculated by
fs directly, for each pcluster) and enable EROFS fixed-sized output
compression.
Note that MicroLZMA can also be later used by other things in addition
to EROFS too where wasting minimal amount of space for headers is
important and it can be only compiled by enabling XZ_DEC_MICROLZMA.
MicroLZMA has been supported by the latest upstream XZ embedded [1] &
XZ utils [2], apply the latest related XZ embedded upstream patches by
the XZ author Lasse here.
Secondly, multiple device is also supported in this cycle, which is
designed for multi-layer container images. By working together with
inter-layer data deduplication and compression, we can achieve the
next high-performance container image solution. Our team will announce
the new Nydus container image service [3] implementation with new RAFS
v6 (EROFS-compatible) format in Open Source Summit 2021 China [4]
soon.
Besides, the secondary compression head support and readmore
decompression strategy are also included in this cycle. There are also
some minor bugfixes and cleanups, as always.
Summary:
- support multiple devices for multi-layer container images;
- support the secondary compression head;
- support readmore decompression strategy;
- support new LZMA algorithm (specifically called MicroLZMA);
- some bugfixes & cleanups"
* tag 'erofs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: don't trigger WARN() when decompression fails
erofs: get rid of ->lru usage
erofs: lzma compression support
erofs: rename some generic methods in decompressor
lib/xz, lib/decompress_unxz.c: Fix spelling in comments
lib/xz: Add MicroLZMA decoder
lib/xz: Move s->lzma.len = 0 initialization to lzma_reset()
lib/xz: Validate the value before assigning it to an enum variable
lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
erofs: introduce readmore decompression strategy
erofs: introduce the secondary compression head
erofs: get compression algorithms directly on mapping
erofs: add multiple device support
erofs: decouple basic mount options from fs_context
erofs: remove the fast path of per-CPU buffer decompression
|
|
Pull fscrypt updates from Eric Biggers:
"Some cleanups for fs/crypto/:
- Allow 256-bit master keys with AES-256-XTS
- Improve documentation and comments
- Remove unneeded field fscrypt_operations::max_namelen"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: improve a few comments
fscrypt: allow 256-bit master keys with AES-256-XTS
fscrypt: improve documentation for inline encryption
fscrypt: clean up comments in bio.c
fscrypt: remove fscrypt_operations::max_namelen
|
|
Pull block inode sync updates from Jens Axboe:
"This contains improvements to how bdev inode syncing is handled,
unifying the API"
* tag 'for-5.16/inode-sync-2021-10-29' of git://git.kernel.dk/linux-block:
block: simplify the block device syncing code
ntfs3: use sync_blockdev_nowait
fat: use sync_blockdev_nowait
btrfs: use sync_blockdev
xen-blkback: use sync_blockdev
block: remove __sync_blockdev
fs: remove __sync_filesystem
|
|
Pull kiocb->ki_complete() cleanup from Jens Axboe:
"This removes the res2 argument from kiocb->ki_complete().
Only the USB gadget code used it, everybody else passes 0. The USB
guys checked the user gadget code they could find, and everybody just
uses res as expected for the async interface"
* tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block:
fs: get rid of the res2 iocb->ki_complete argument
usb: remove res2 argument from gadget code completions
|
|
git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
|
|
Pull CDROM updates from Jens Axboe:
"On behalf of Phillip, here are the CDROM updates for the 5.16-rc1
merge window:
- Add ioctl for improved media change detection (Lukas)
- Reformat some documentation (Phillip)
- Redundant variable removal (luo)"
* tag 'for-5.16/cdrom-2021-10-29' of git://git.kernel.dk/linux-block:
cdrom: Remove redundant variable and its assignment
cdrom: docs: reformat table in Documentation/userspace-api/ioctl/cdrom.rst
drivers/cdrom: improved ioctl for media change detection
|
|
Pull SCSI multi-actuator support from Jens Axboe:
"This adds SCSI support for the recently merged block multi-actuator
support. Since this was sitting on top of the block tree, the SCSI
side asked me to queue it up."
* tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block:
doc: Fix typo in request queue sysfs documentation
doc: document sysfs queue/independent_access_ranges attributes
libata: support concurrent positioning ranges log
scsi: sd: add concurrent positioning ranges support
|
|
Pull bdev size cleanups from Jens Axboe:
"Clean up the bdev size handling with new bdev_nr_bytes() helper"
* tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits)
partitions/ibm: use bdev_nr_sectors instead of open coding it
partitions/efi: use bdev_nr_bytes instead of open coding it
block/ioctl: use bdev_nr_sectors and bdev_nr_bytes
block: cache inode size in bdev
udf: use sb_bdev_nr_blocks
reiserfs: use sb_bdev_nr_blocks
ntfs: use sb_bdev_nr_blocks
jfs: use sb_bdev_nr_blocks
ext4: use sb_bdev_nr_blocks
block: add a sb_bdev_nr_blocks helper
block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate
squashfs: use bdev_nr_bytes instead of open coding it
reiserfs: use bdev_nr_bytes instead of open coding it
pstore/blk: use bdev_nr_bytes instead of open coding it
ntfs3: use bdev_nr_bytes instead of open coding it
nilfs2: use bdev_nr_bytes instead of open coding it
nfs/blocklayout: use bdev_nr_bytes instead of open coding it
jfs: use bdev_nr_bytes instead of open coding it
hfsplus: use bdev_nr_sectors instead of open coding it
hfs: use bdev_nr_sectors instead of open coding it
...
|
|
Pull io_uring updates from Jens Axboe:
"Light on new features - basically just the hybrid mode support.
Outside of that it's just fixes, cleanups, and performance
improvements.
In detail:
- Add ring related information to the fdinfo output (Hao)
- Hybrid async mode (Hao)
- Support for batched issue on block (me)
- sqe error trace improvement (me)
- IOPOLL efficiency improvements (Pavel)
- submit state cleanups and improvements (Pavel)
- Completion side improvements (Pavel)
- Drain improvements (Pavel)
- Buffer selection cleanups (Pavel)
- Fixed file node improvements (Pavel)
- io-wq setup cancelation fix (Pavel)
- Various other performance improvements and cleanups (Pavel)
- Misc fixes (Arnd, Bixuan, Changcheng, Hao, me, Noah)"
* tag 'for-5.16/io_uring-2021-10-29' of git://git.kernel.dk/linux-block: (97 commits)
io-wq: remove worker to owner tw dependency
io_uring: harder fdinfo sq/cq ring iterating
io_uring: don't assign write hint in the read path
io_uring: clusterise ki_flags access in rw_prep
io_uring: kill unused param from io_file_supports_nowait
io_uring: clean up timeout async_data allocation
io_uring: don't try io-wq polling if not supported
io_uring: check if opcode needs poll first on arming
io_uring: clean iowq submit work cancellation
io_uring: clean io_wq_submit_work()'s main loop
io-wq: use helper for worker refcounting
io_uring: implement async hybrid mode for pollable requests
io_uring: Use ERR_CAST() instead of ERR_PTR(PTR_ERR())
io_uring: split logic of force_nonblock
io_uring: warning about unused-but-set parameter
io_uring: inform block layer of how many requests we are submitting
io_uring: simplify io_file_supports_nowait()
io_uring: combine REQ_F_NOWAIT_{READ,WRITE} flags
io_uring: arm poll for non-nowait files
fs/io_uring: Prioritise checking faster conditions first in io_write
...
|
|
Pull block driver updates from Jens Axboe:
- paride driver cleanups (Christoph)
- Remove cryptoloop support (Christoph)
- null_blk poll support (me)
- Now that add_disk() supports proper error handling, add it to various
drivers (Luis)
- Make ataflop actually work again (Michael)
- s390 dasd fixes (Stefan, Heiko)
- nbd fixes (Yu, Ye)
- Remove redundant wq flush in mtip32xx (Christophe)
- NVMe updates
- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)
- support the current discovery subsystem entry (Hannes Reinecke)
- use flex_array_size and struct_size (Len Baker)
- bcache fixes (Christoph, Coly, Chao, Lin, Qing)
- MD updates (Christoph, Guoqing, Xiao)
- Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)
* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
null_blk: Fix handling of submit_queues and poll_queues attributes
block: ataflop: Fix warning comparing pointer to 0
bcache: replace snprintf in show functions with sysfs_emit
bcache: move uapi header bcache.h to bcache code directory
nvmet: use flex_array_size and struct_size
nvmet: register discovery subsystem as 'current'
nvmet: switch check for subsystem type
nvme: add new discovery log page entry definitions
block: ataflop: more blk-mq refactoring fixes
block: remove support for cryptoloop and the xor transfer
mtd: add add_disk() error handling
rnbd: add error handling support for add_disk()
um/drivers/ubd_kern: add error handling support for add_disk()
m68k/emu/nfblock: add error handling support for add_disk()
xen-blkfront: add error handling support for add_disk()
bcache: add error handling support for add_disk()
dm: add add_disk() error handling
block: aoe: fixup coccinelle warnings
nvmet: use struct_size over open coded arithmetic
nvme: drop scan_lock and always kick requeue list when removing namespaces
...
|
|
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
|
|
This patch is closely related to commit 6016df8fe874 ("selftests/bpf:
Fix broken riscv build"). When clang includes the system include
directories, but targeting BPF program, __BITS_PER_LONG defaults to
32, unless explicitly set. Work around this problem, by explicitly
setting __BITS_PER_LONG to __riscv_xlen.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211028161057.520552-5-bjorn@kernel.org
|
|
Add macros for 64-bit RISC-V PT_REGS to bpf_tracing.h.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211028161057.520552-4-bjorn@kernel.org
|
|
Add RISC-V to the HOSTARCH parsing, so that ARCH is "riscv", and not
"riscv32" or "riscv64".
This affects the perf and libbpf builds, so that arch specific
includes are correctly picked up for RISC-V.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211028161057.520552-3-bjorn@kernel.org
|
|
Now that BPF programs can be up to 1M instructions, it is not uncommon
that a program requires more than the current 16 iterations to
converge.
Bump it to 32, which is enough for selftests/bpf, and test_bpf.ko.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211028161057.520552-2-bjorn@kernel.org
|
|
Add the test to check sockmap with strparser is working well.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211029141216.211899-3-liujian56@huawei.com
|
|
After "skmsg: lose offset info in sk_psock_skb_ingress", the test case
with ktls failed. This because ktls parser(tls_read_size) return value
is 285 not 256.
The case like this:
tls_sk1 --> redir_sk --> tls_sk2
tls_sk1 sent out 512 bytes data, after tls related processing redir_sk
recved 570 btyes data, and redirect 512 (skb_use_parser) bytes data to
tls_sk2; but tls_sk2 needs 285 * 2 bytes data, receive timeout occurred.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211029141216.211899-2-liujian56@huawei.com
|
