| Age | Commit message (Collapse) | Author |
|---|
|
commit 3e38f946062b4845961ab86b726651b4457b2af8 upstream.
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 386cd3dcfd63491619b4034b818737fc0219e128 upstream.
Fix a typo in an email address.
Closes: https://lore.kernel.org/all/20240925-rational-succinct-vulture-cca9fb@lemur/T/
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250318004031.2703923-1-alexey.makhalov@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d33724ffb743d3d2698bd969e29253ae0cff9739 upstream.
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9a9c3e1fe5256da14a0a307dff0478f90c55fc8c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d433981385c62c72080e26f1c00a961d18b233be upstream.
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ac37f0dcd2e0b729fa7b5513908dc8ab802b540)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0fa7873f2f869087b1e7793f7fac3713a1e3afe upstream.
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d73b0845ab3963856e857b810600e5594bc29f4 upstream.
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a5c060b593ad152318f89e5564bfdfcff8a6ac0)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
software cursor"
commit fe14c0f096f58d2569e587e9f4b05d772272bbb4 upstream.
This reverts commit 272e6aab14bbf98d7a06b2b1cd6308a02d4a10a1.
Applying degamma curve to the cursor by default breaks Linux userspace
expectation.
On Linux, AMD display manager enables cursor degamma ROM just for
implict sRGB on HW versions where degamma is split into two blocks:
degamma ROM for pre-defined TFs and `gamma correction` for user/custom
curves, and degamma ROM settings doesn't apply to cursor plane.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Reported-by: Michel Dänzer <michel.daenzer@mailbox.org>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4144
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6a305d4748801a6c799ae9375b2ecff3aed094b)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ce2affc6ef9f84b4aebbf18bd5c57397b6024eb upstream.
The Btrfs documentation states that if the commit value is greater than
300 a warning should be issued. The warning was accidentally lost in the
new mount API update.
Fixes: 6941823cc878 ("btrfs: remove old mount API code")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0fd1c6098633f9a95fc2f636383546c82b704c3 upstream.
If btrfs_reserve_extent() fails while submitting an async_extent for a
compressed write, then we fail to call free_async_extent_pages() on the
async_extent and leak its folios. A likely cause for such a failure
would be btrfs_reserve_extent() failing to find a large enough
contiguous free extent for the compressed extent.
I was able to reproduce this by:
1. mount with compress-force=zstd:3
2. fallocating most of a filesystem to a big file
3. fragmenting the remaining free space
4. trying to copy in a file which zstd would generate large compressed
extents for (vmlinux worked well for this)
Step 4. hits the memory leak and can be repeated ad nauseam to
eventually exhaust the system memory.
Fix this by detecting the case where we fallback to uncompressed
submission for a compressed async_extent and ensuring that we call
free_async_extent_pages().
Fixes: 131a821a243f ("btrfs: fallback if compressed IO fails for ENOSPC")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-developed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54db6d1bdd71fa90172a2a6aca3308bbf7fa7eb5 upstream.
If the discard worker is running and there's currently only one block
group, that block group is a data block group, it's in the unused block
groups discard list and is being used (it got an extent allocated from it
after becoming unused), the worker can end up in an infinite loop if a
transaction abort happens or the async discard is disabled (during remount
or unmount for example).
This happens like this:
1) Task A, the discard worker, is at peek_discard_list() and
find_next_block_group() returns block group X;
2) Block group X is in the unused block groups discard list (its discard
index is BTRFS_DISCARD_INDEX_UNUSED) since at some point in the past
it become an unused block group and was added to that list, but then
later it got an extent allocated from it, so its ->used counter is not
zero anymore;
3) The current transaction is aborted by task B and we end up at
__btrfs_handle_fs_error() in the transaction abort path, where we call
btrfs_discard_stop(), which clears BTRFS_FS_DISCARD_RUNNING from
fs_info, and then at __btrfs_handle_fs_error() we set the fs to RO mode
(setting SB_RDONLY in the super block's s_flags field);
4) Task A calls __add_to_discard_list() with the goal of moving the block
group from the unused block groups discard list into another discard
list, but at __add_to_discard_list() we end up doing nothing because
btrfs_run_discard_work() returns false, since the super block has
SB_RDONLY set in its flags and BTRFS_FS_DISCARD_RUNNING is not set
anymore in fs_info->flags. So block group X remains in the unused block
groups discard list;
5) Task A then does a goto into the 'again' label, calls
find_next_block_group() again we gets block group X again. Then it
repeats the previous steps over and over since there are not other
block groups in the discard lists and block group X is never moved
out of the unused block groups discard list since
btrfs_run_discard_work() keeps returning false and therefore
__add_to_discard_list() doesn't move block group X out of that discard
list.
When this happens we can get a soft lockup report like this:
[71.957] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:3:97]
[71.957] Modules linked in: xfs af_packet rfkill (...)
[71.957] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.957] Tainted: [W]=WARN
[71.957] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.957] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.957] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[71.957] Code: c1 01 48 83 (...)
[71.957] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[71.957] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[71.957] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[71.957] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[71.957] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[71.957] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[71.957] FS: 0000000000000000(0000) GS:ffff89707bc00000(0000) knlGS:0000000000000000
[71.957] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71.957] CR2: 00005605bcc8d2f0 CR3: 000000010376a001 CR4: 0000000000770ef0
[71.957] PKRU: 55555554
[71.957] Call Trace:
[71.957] <TASK>
[71.957] process_one_work+0x17e/0x330
[71.957] worker_thread+0x2ce/0x3f0
[71.957] ? __pfx_worker_thread+0x10/0x10
[71.957] kthread+0xef/0x220
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork+0x34/0x50
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork_asm+0x1a/0x30
[71.957] </TASK>
[71.957] Kernel panic - not syncing: softlockup: hung tasks
[71.987] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W L 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.989] Tainted: [W]=WARN, [L]=SOFTLOCKUP
[71.989] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.991] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.992] Call Trace:
[71.993] <IRQ>
[71.994] dump_stack_lvl+0x5a/0x80
[71.994] panic+0x10b/0x2da
[71.995] watchdog_timer_fn.cold+0x9a/0xa1
[71.996] ? __pfx_watchdog_timer_fn+0x10/0x10
[71.997] __hrtimer_run_queues+0x132/0x2a0
[71.997] hrtimer_interrupt+0xff/0x230
[71.998] __sysvec_apic_timer_interrupt+0x55/0x100
[71.999] sysvec_apic_timer_interrupt+0x6c/0x90
[72.000] </IRQ>
[72.000] <TASK>
[72.001] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[72.002] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[72.002] Code: c1 01 48 83 (...)
[72.005] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[72.006] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[72.006] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[72.007] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[72.008] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[72.009] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[72.010] ? btrfs_discard_workfn+0x51/0x400 [btrfs 23b01089228eb964071fb7ca156eee8cd3bf996f]
[72.011] process_one_work+0x17e/0x330
[72.012] worker_thread+0x2ce/0x3f0
[72.013] ? __pfx_worker_thread+0x10/0x10
[72.014] kthread+0xef/0x220
[72.014] ? __pfx_kthread+0x10/0x10
[72.015] ret_from_fork+0x34/0x50
[72.015] ? __pfx_kthread+0x10/0x10
[72.016] ret_from_fork_asm+0x1a/0x30
[72.017] </TASK>
[72.017] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[72.019] Rebooting in 90 seconds..
So fix this by making sure we move a block group out of the unused block
groups discard list when calling __add_to_discard_list().
Fixes: 2bee7eb8bb81 ("btrfs: discard one region at a time in async discard")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1242012
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12614f794274f63fbdfe76771b2b332077d63848 upstream.
arch_uprobe_skip_sstep() returns true if instruction was emulated, that
is to say, there is no need to single step for the emulated instructions.
regs->csr_era will point to the destination address directly after the
exception, so the resume_era related code is redundant, just remove them.
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b326b2371f94e798137cc1a3c5c2eef2bc69061 upstream.
When executing the "perf probe" and "perf stat" test cases about some
cryptographic algorithm, the output shows that "Trace/breakpoint trap".
This is because it uses the software singlestep breakpoint for uprobes
on LoongArch, and no need to use the hardware singlestep. So just remove
the related function call to user_{en,dis}able_single_step() for uprobes
on LoongArch.
How to reproduce:
Please make sure CONFIG_UPROBE_EVENTS is set and openssl supports sm2
algorithm, then execute the following command.
cd tools/perf && make
./perf probe -x /usr/lib64/libcrypto.so BN_mod_mul_montgomery
./perf stat -e probe_libcrypto:BN_mod_mul_montgomery openssl speed sm2
Cc: stable@vger.kernel.org
Fixes: 19bc6cb64092 ("LoongArch: Add uprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90436d234230e9a950ccd87831108b688b27a234 upstream.
Fix MAX_REG_OFFSET calculation, make it point to the last register
in 'struct pt_regs' and not to the marker itself, which could allow
regs_get_register() to return an invalid offset.
Cc: stable@vger.kernel.org
Fixes: 803b0fc5c3f2baa6e5 ("LoongArch: Add process management")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ceb9155d058a11242aa0572875c44e9713b1a2be upstream.
Save and restore CSR.CNTC for hibernation which is similar to suspend.
For host this is unnecessary because sched clock is ensured continuous,
but for kvm guest sched clock isn't enough because rdtime.d should also
be continuous.
Host::rdtime.d = Host::CSR.CNTC + counter
Guest::rdtime.d = Host::CSR.CNTC + Host::CSR.GCNTC + Guest::CSR.CNTC + counter
so,
Guest::rdtime.d = Host::rdtime.d + Host::CSR.GCNTC + Guest::CSR.CNTC
To ensure Guest::rdtime.d continuous, Host::rdtime.d should be at first
continuous, while Host::CSR.GCNTC / Guest::CSR.CNTC is maintained by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e245b7b74c3a2ead5fa4bad27cc275284c75189 upstream.
Now arch_cpu_idle() is annotated with __cpuidle which means it is in
the .cpuidle.text section, but __arch_cpu_idle() isn't. Thus, fix the
missing .cpuidle.text section assignment for __arch_cpu_idle() in order
to correct backtracing with nmi_backtrace().
The principle is similar to the commit 97c8580e85cf81c ("MIPS: Annotate
cpu_wait implementations with __cpuidle")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2468b0e3d5659dfde77f081f266e1111a981efb8 upstream.
When CONFIG_PREEMPT_COUNT is not configured (i.e. CONFIG_PREEMPT_NONE/
CONFIG_PREEMPT_VOLUNTARY), preempt_disable() / preempt_enable() merely
acts as a barrier(). However, in these cases cond_resched() can still
trigger a context switch and modify the CSR.EUEN, resulting in do_fpu()
exception being activated within the kernel-fpu critical sections, as
demonstrated in the following path:
dcn32_calculate_wm_and_dlg()
DC_FP_START()
dcn32_calculate_wm_and_dlg_fpu()
dcn32_find_dummy_latency_index_for_fw_based_mclk_switch()
dcn32_internal_validate_bw()
dcn32_enable_phantom_stream()
dc_create_stream_for_sink()
kzalloc(GFP_KERNEL)
__kmem_cache_alloc_node()
__cond_resched()
DC_FP_END()
This patch is similar to commit d02198550423a0b (x86/fpu: Improve crypto
performance by making kernel-mode FPU reliably usable in softirqs). It
uses local_bh_disable() instead of preempt_disable() for non-RT kernels
so it can avoid the cond_resched() issue, and also extend the kernel-fpu
application scenarios to the softirq context.
Cc: stable@vger.kernel.org
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 578e1b96fad7402ff7e9c7648c8f1ad0225147c8 upstream.
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report")
Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.local/
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Tested-by: Petr Tesarik <petr@tesarici.cz>
Link: https://patch.msgid.link/20250512152420.87441-1-i@rong.moe
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55dd5b4db3bf04cf077a8d1712f6295d4517c337 upstream.
UDF maintains total length of all extents in i_lenExtents. Generally we
keep extent lengths (and thus i_lenExtents) block aligned because it
makes the file appending logic simpler. However the standard mandates
that the inode size must match the length of all extents and thus we
trim the last extent when closing the file. To catch possible bugs we
also verify that i_lenExtents matches i_size when evicting inode from
memory. Commit b405c1e58b73 ("udf: refactor udf_next_aext() to handle
error") however broke the code updating i_lenExtents and thus
udf_evict_inode() ended up spewing lots of errors about incorrectly
sized extents although the extents were actually sized properly. Fix the
updating of i_lenExtents to silence the errors.
Fixes: b405c1e58b73 ("udf: refactor udf_next_aext() to handle error")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 428dc9fc0873989d73918d4a9cc22745b7bbc799 upstream.
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 650ba21b131e ("sched_ext: Implement DSQ iterator")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
interrupted"
commit df180e65305f8c1e020d54bfc2132349fd693de1 upstream.
Several issues with this change:
* The analysis is flawed and it's unclear what problem is being
fixed. There is no difference between wait_event_freezable_timeout()
and wait_event_timeout() with respect to device interrupts. And of
course "the interrupt notifying the finish of an operation happens
during wait_event_freezable_timeout()" -- that's how it's supposed
to work.
* The link at the "Closes:" tag appears to be an unrelated
use-after-free in idxd.
* It introduces a regression: dmatest threads are meant to be
freezable and this change breaks that.
See discussion here:
https://lore.kernel.org/dmaengine/878qpa13fe.fsf@AUSNATLYNCH.amd.com/
Fixes: e87ca16e9911 ("dmaengine: dmatest: Fix dmatest waiting less when interrupted")
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250403-dmaengine-dmatest-revert-waiting-less-v1-1-8227c5a3d7c8@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6d6d7f91cc8c111d40416ac9240a3bb9396c5235 ]
If there are still layout segments in the layout plh_return_lsegs list
after a layout return, we should be resetting the state to ensure they
eventually get returned as well.
Fixes: 68f744797edd ("pNFS: Do not free layout segments that are marked for return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3ca9eef6646576ad506a96d941d87a69f66732a ]
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 491deb9b8c4ad12fe51d554a69b8165b9ef9429f ]
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92ec4855034b2c4d13f117558dc73d20581fa9ff ]
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a7674c ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82bbe02b2500ef0a62053fe2eb84773fe31c5a0a ]
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dcb479fde00be9a151c047d0a7c0626b64eb0019 ]
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf449f35e77fd44017abf991fac1f9ab7705bbe0 ]
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e57a ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bdea6fad6fb985ff13828373c48e337c4e939f9 ]
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 865ab2461375e3a5a2526f91f9a9f17b8931bc9e ]
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3dd5fb2fa494dcbdb10f8d27f2deac8ef61a2fc ]
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes: 2267672a6190 ("doc/netlink/specs: Update the tc spec")
Link: https://patch.msgid.link/20250513221638.842532-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9fb87b8b86918e34ef6bf3316311f41bc1a5b1f ]
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Link: https://patch.msgid.link/20250513221316.841700-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66c8f7b435bddb7d8577ac8a57e175a6cb147227 ]
For determining actual job execution time, save the current value of the
CTX_TIMESTAMP register rather than the value saved in LRC since the
current register value is the closest to the start time of the job.
v2: Define MI_STORE_REGISTER_MEM to fix compile error
v3: Place MI_STORE_REGISTER_MEM sorted by MI_INSTR (Lucas)
Fixes: 65921374c48f ("drm/xe: Emit ctx timestamp copy in ring ops")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-6-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 38b14233e5deff51db8faec287b4acd227152246)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b0cd72757c69bc2d45da42b41023e288d02e772 ]
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d8a99c5a7c7f4f7eca2c168a4ec254409670035 ]
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 588431474eb7572e57a927fa8558c9ba2f8af143 ]
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sendmsg+0xeb/0x170
? kasan_save_stack+0x30/0x40
? copy_msghdr_from_user+0x110/0x110
? do_syscall_64+0x6d/0x140
? lock_acquire+0x1c2/0x530
? __virt_addr_valid+0x116/0x3b0
? __virt_addr_valid+0x1da/0x3b0
? lock_downgrade+0x680/0x680
? __delete_object+0x21/0x50
__sys_sendmsg+0xf7/0x180
? __sys_sendmsg_sock+0x20/0x20
? kmem_cache_free+0x14c/0x4e0
? __x64_sys_close+0x78/0xd0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f855e113367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367
RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004
RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100
R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019
R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000
</TASK>
Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fd7ad6f36af36f30a06d165eff3780cb139fa79 ]
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4227ea91e2657f7965e34313448e9d0a2b67712e ]
When bridged ports and standalone ports share a VLAN, e.g. via VLAN
uppers, or untagged traffic with a vlan unaware bridge, the ASIC will
still try to forward traffic to known FDB entries on standalone ports.
But since the port VLAN masks prevent forwarding to bridged ports, this
traffic will be dropped.
This e.g. can be observed in the bridge_vlan_unaware ping tests, where
this breaks pinging with learning on.
Work around this by enabling the simplified EAP mode on switches
supporting it for standalone ports, which causes the ASIC to redirect
traffic of unknown source MAC addresses to the CPU port.
Since standalone ports do not learn, there are no known source MAC
addresses, so effectively this redirects all incoming traffic to the CPU
port.
Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66e48ef6ef506c89ec1b3851c6f9f5f80b5835ff ]
If CONFIG_SH_DMA_API=n:
WARNING: unmet direct dependencies detected for G2_DMA
Depends on [n]: SH_DREAMCAST [=y] && SH_DMA_API [=n]
Selected by [y]:
- SND_AICA [=y] && SOUND [=y] && SND [=y] && SND_SUPERH [=y] && SH_DREAMCAST [=y]
SND_AICA selects G2_DMA. As the latter depends on SH_DMA_API, the
former should depend on SH_DMA_API, too.
Fixes: f477a538c14d07f8 ("sh: dma: fix kconfig dependency for G2_DMA")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505131320.PzgTtl9H-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/b90625f8a9078d0d304bafe862cbe3a3fab40082.1747121335.git.geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d8932133dcecbd9bef1559533c1089601006f45 ]
We need to lock this queue for that condition because the timeout work
executes per-namespace and can poll the poll CQ.
Reported-by: Hannes Reinecke <hare@kernel.org>
Closes: https://lore.kernel.org/all/20240902130728.1999-1-hare@kernel.org/
Fixes: a0fa9647a54e ("NVMe: add blk polling support")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40696426b8c8c4f13cf6ac52f0470eed144be4b2 ]
The only reason nvme_pci_npages_prp() could be used as a compile-time
known result in BUILD_BUG_ON() is because the compiler was always choosing
to inline the function. Under special circumstances (sanitizer coverage
functions disabled for __init functions on ARCH=um), the compiler decided
to stop inlining it:
drivers/nvme/host/pci.c: In function 'nvme_init':
include/linux/compiler_types.h:557:45: error: call to '__compiletime_assert_678' declared with attribute error: BUILD_BUG_ON failed: nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:538:25: note: in definition of macro '__compiletime_assert'
538 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:557:9: note: in expansion of macro '_compiletime_assert'
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG'
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
drivers/nvme/host/pci.c:3804:9: note: in expansion of macro 'BUILD_BUG_ON'
3804 | BUILD_BUG_ON(nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS);
| ^~~~~~~~~~~~
Force it to be __always_inline to make sure it is always available for
use with BUILD_BUG_ON().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061846.12FMyRjj-lkp@intel.com/
Fixes: c372cdd1efdf ("nvme-pci: iod npages fits in s8")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 498625a8ab2c8e1c9ab5105744310e8d6952cc01 ]
It has been reported that when under a bridge with stp_state=1, the logs
get spammed with this message:
[ 251.734607] fsl_dpaa2_eth dpni.5 eth0: Couldn't decode source port
Further debugging shows the following info associated with packets:
source_port=-1, switch_id=-1, vid=-1, vbid=1
In other words, they are data plane packets which are supposed to be
decoded by dsa_tag_8021q_find_port_by_vbid(), but the latter (correctly)
refuses to do so, because no switch port is currently in
BR_STATE_LEARNING or BR_STATE_FORWARDING - so the packet is effectively
unexpected.
The error goes away after the port progresses to BR_STATE_LEARNING in 15
seconds (the default forward_time of the bridge), because then,
dsa_tag_8021q_find_port_by_vbid() can correctly associate the data plane
packets with a plausible bridge port in a plausible STP state.
Re-reading IEEE 802.1D-1990, I see the following:
"4.4.2 Learning: (...) The Forwarding Process shall discard received
frames."
IEEE 802.1D-2004 further clarifies:
"DISABLED, BLOCKING, LISTENING, and BROKEN all correspond to the
DISCARDING port state. While those dot1dStpPortStates serve to
distinguish reasons for discarding frames, the operation of the
Forwarding and Learning processes is the same for all of them. (...)
LISTENING represents a port that the spanning tree algorithm has
selected to be part of the active topology (computing a Root Port or
Designated Port role) but is temporarily discarding frames to guard
against loops or incorrect learning."
Well, this is not what the driver does - instead it sets
mac[port].ingress = true.
To get rid of the log spam, prevent unexpected data plane packets to
be received by software by discarding them on ingress in the LISTENING
state.
In terms of blame attribution: the prints only date back to commit
d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based
on the VBID"). However, the settings would permit a LISTENING port to
forward to a FORWARDING port, and the standard suggests that's not OK.
Fixes: 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250509113816.2221992-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c92d6089d8ad7d4d815ebcedee3f3907b539ff1f ]
There is a situation where after THALT is set high, TGO stays high as
well. Because jiffies are never updated, as we are in a context with
interrupts disabled, we never exit that loop and have a deadlock.
That deadlock was noticed on a sama5d4 device that stayed locked for days.
Use retries instead of jiffies so that the timeout really works and we do
not have a deadlock anymore.
Fixes: e86cd53afc590 ("net/macb: better manage tx errors")
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509121935.16282-1-othacehe@gnu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd33993a9721ab1dae38bd37c9f665987d554239 ]
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff7b190aef6cccdb6f14d20c5753081fe6420e0b ]
When an event with UMP message is sent to a UMP client, the EP port
receives always no matter where the event is sent to, as it's a
catch-all port. OTOH, if an event is sent to EP port, and if the
event has a certain UMP Group, it should have been delivered to the
associated UMP Group port, too, but this was ignored, so far.
This patch addresses the behavior. Now a UMP event sent to the
Endpoint port will be delivered to the subscribers of the UMP group
port the event is associated with.
The patch also does a bit of refactoring to simplify the code about
__deliver_to_subscribers().
Fixes: 177ccf811df4 ("ALSA: seq: Support MIDI 2.0 UMP Endpoint port")
Link: https://patch.msgid.link/20250511134528.6314-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4f349bd6e58051df698b82f94721f18a02a293d ]
mctp_flow_prepare_output() is called in mctp_route_output(), which
places outbound packets onto a given interface. The packet may represent
a message fragment, in which case we provoke an unbalanced reference
count to the underlying device. This causes trouble if we ever attempt
to remove the interface:
[ 48.702195] usb 1-1: USB disconnect, device number 2
[ 58.883056] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
[ 69.022548] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
[ 79.172568] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
...
Predicate the invocation of mctp_dev_set_key() in
mctp_flow_prepare_output() on not already having associated the device
with the key. It's not yet realistic to uphold the property that the key
maintains only one device reference earlier in the transmission sequence
as the route (and therefore the device) may not be known at the time the
key is associated with the socket.
Fixes: 67737c457281 ("mctp: Pass flow data & flow release events to drivers")
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20250508-mctp-dev-refcount-v1-1-d4f965c67bb5@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97c4e094a4b2edbb4fffeda718f8e806f825a18f ]
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 933056357a8cf0c9b3fb2ecc4d2d8d142614f0a3 ]
Use dualstack socket to support both v4 and v6. v4-mapped-v6 address
can be used to do v4.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ebd75f5f2392c2ada04c6e11447415911fe1506 ]
Support 3-tuple filtering by making client_ip optional. When -c is
not passed, don't specify src-ip/src-port in the filter.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfccbaac1b45f9af7d76589d7e31ad921b50c0d7 ]
There is a bunch of places where error() calls look out of place.
Use the same error(1, errno, ...) pattern everywhere.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b9049af8066b4705d83bb7847ee3c960fc58d09 ]
So we can plug the other ones in the future if needed.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
