| Age | Commit message (Collapse) | Author |
|---|
|
My previous patch had a typo/thinko which prevents this driver
from being enabled: change X64_64 to X86_64.
Fixes: 0a9ece9ba154 ("EDAC/igen6: fix core dependency")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Cc: bowsingbetee <bowsingbetee@protonmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull kvm fixes from Paolo Bonzini:
- Allow again loading KVM on 32-bit non-PAE builds
- Fixes for host SMIs on AMD
- Fixes for guest SMIs on AMD
- Fixes for selftests on s390 and ARM
- Fix memory leak
- Enforce no-instrumentation area on vmentry when hardware breakpoints
are in use.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: selftests: smm_test: Test SMM enter from L2
KVM: nSVM: Restore nested control upon leaving SMM
KVM: nSVM: Fix L1 state corruption upon return from SMM
KVM: nSVM: Introduce svm_copy_vmrun_state()
KVM: nSVM: Check that VM_HSAVE_PA MSR was set before VMRUN
KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
KVM: SVM: Fix sev_pin_memory() error checks in SEV migration utilities
KVM: SVM: Return -EFAULT if copy_to_user() for SEV mig packet header fails
KVM: SVM: add module param to control the #SMI interception
KVM: SVM: remove INIT intercept handler
KVM: SVM: #SMI interception must not skip the instruction
KVM: VMX: Remove vmx_msr_index from vmx.h
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
KVM: selftests: Address extra memslot parameters in vm_vaddr_alloc
kvm: debugfs: fix memory leak in kvm_create_vm_debugfs
KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: SVM: Revert clearing of C-bit on GPA in #NPF handler
KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
KVM: x86: Use kernel's x86_phys_bits to handle reduced MAXPHYADDR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Revert a patch which caused boot failures with QCOM IOMMU
- Two fixes for Intel VT-d context table handling
- Physical address decoding fix for Rockchip IOMMU
- Add a reviewer for AMD IOMMU
* tag 'iommu-fixes-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Add Suravee Suthikulpanit as Reviewer for AMD IOMMU (AMD-Vi)
iommu/rockchip: Fix physical address decoding
iommu/vt-d: Fix clearing real DMA device's scalable-mode context entries
iommu/vt-d: Global devTLB flush when present context entry changed
iommu/qcom: Revert "iommu/arm: Cleanup resources in case of probe error path"
|
|
Two additional tests are added:
- SMM triggered from L2 does not currupt L1 host state.
- Save/restore during SMM triggered from L2 does not corrupt guest/host
state.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-7-vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If the VM was migrated while in SMM, no nested state was saved/restored,
and therefore svm_leave_smm has to load both save and control area
of the vmcb12. Save area is already loaded from HSAVE area,
so now load the control area as well from the vmcb12.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
VMCB split commit 4995a3685f1b ("KVM: SVM: Use a separate vmcb for the
nested L2 guest") broke return from SMM when we entered there from guest
(L2) mode. Gen2 WS2016/Hyper-V is known to do this on boot. The problem
manifests itself like this:
kvm_exit: reason EXIT_RSM rip 0x7ffbb280 info 0 0
kvm_emulate_insn: 0:7ffbb280: 0f aa
kvm_smm_transition: vcpu 0: leaving SMM, smbase 0x7ffb3000
kvm_nested_vmrun: rip: 0x000000007ffbb280 vmcb: 0x0000000008224000
nrip: 0xffffffffffbbe119 int_ctl: 0x01020000 event_inj: 0x00000000
npt: on
kvm_nested_intercepts: cr_read: 0000 cr_write: 0010 excp: 40060002
intercepts: fd44bfeb 0000217f 00000000
kvm_entry: vcpu 0, rip 0xffffffffffbbe119
kvm_exit: reason EXIT_NPF rip 0xffffffffffbbe119 info
200000006 1ab000
kvm_nested_vmexit: vcpu 0 reason npf rip 0xffffffffffbbe119 info1
0x0000000200000006 info2 0x00000000001ab000 intr_info 0x00000000
error_code 0x00000000
kvm_page_fault: address 1ab000 error_code 6
kvm_nested_vmexit_inject: reason EXIT_NPF info1 200000006 info2 1ab000
int_info 0 int_info_err 0
kvm_entry: vcpu 0, rip 0x7ffbb280
kvm_exit: reason EXIT_EXCP_GP rip 0x7ffbb280 info 0 0
kvm_emulate_insn: 0:7ffbb280: 0f aa
kvm_inj_exception: #GP (0x0)
Note: return to L2 succeeded but upon first exit to L1 its RIP points to
'RSM' instruction but we're not in SMM.
The problem appears to be that VMCB01 gets irreversibly destroyed during
SMM execution. Previously, we used to have 'hsave' VMCB where regular
(pre-SMM) L1's state was saved upon nested_svm_vmexit() but now we just
switch to VMCB01 from VMCB02.
Pre-split (working) flow looked like:
- SMM is triggered during L2's execution
- L2's state is pushed to SMRAM
- nested_svm_vmexit() restores L1's state from 'hsave'
- SMM -> RSM
- enter_svm_guest_mode() switches to L2 but keeps 'hsave' intact so we have
pre-SMM (and pre L2 VMRUN) L1's state there
- L2's state is restored from SMRAM
- upon first exit L1's state is restored from L1.
This was always broken with regards to svm_get_nested_state()/
svm_set_nested_state(): 'hsave' was never a part of what's being
save and restored so migration happening during SMM triggered from L2 would
never restore L1's state correctly.
Post-split flow (broken) looks like:
- SMM is triggered during L2's execution
- L2's state is pushed to SMRAM
- nested_svm_vmexit() switches to VMCB01 from VMCB02
- SMM -> RSM
- enter_svm_guest_mode() switches from VMCB01 to VMCB02 but pre-SMM VMCB01
is already lost.
- L2's state is restored from SMRAM
- upon first exit L1's state is restored from VMCB01 but it is corrupted
(reflects the state during 'RSM' execution).
VMX doesn't have this problem because unlike VMCB, VMCS keeps both guest
and host state so when we switch back to VMCS02 L1's state is intact there.
To resolve the issue we need to save L1's state somewhere. We could've
created a third VMCB for SMM but that would require us to modify saved
state format. L1's architectural HSAVE area (pointed by MSR_VM_HSAVE_PA)
seems appropriate: L0 is free to save any (or none) of L1's state there.
Currently, KVM does 'none'.
Note, for nested state migration to succeed, both source and destination
hypervisors must have the fix. We, however, don't need to create a new
flag indicating the fact that HSAVE area is now populated as migration
during SMM triggered from L2 was always broken.
Fixes: 4995a3685f1b ("KVM: SVM: Use a separate vmcb for the nested L2 guest")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Separate the code setting non-VMLOAD-VMSAVE state from
svm_set_nested_state() into its own function. This is going to be
re-used from svm_enter_smm()/svm_leave_smm().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
APM states that "The address written to the VM_HSAVE_PA MSR, which holds
the address of the page used to save the host state on a VMRUN, must point
to a hypervisor-owned page. If this check fails, the WRMSR will fail with
a #GP(0) exception. Note that a value of 0 is not considered valid for the
VM_HSAVE_PA MSR and a VMRUN that is attempted while the HSAVE_PA is 0 will
fail with a #GP(0) exception."
svm_set_msr() already checks that the supplied address is valid, so only
check for '0' is missing. Add it to nested_svm_vmrun().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-3-vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
APM states that #GP is raised upon write to MSR_VM_HSAVE_PA when
the supplied address is not page-aligned or is outside of "maximum
supported physical address for this implementation".
page_address_valid() check seems suitable. Also, forcefully page-align
the address when it's written from VMM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[Add comment about behavior for host-provided values. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use IS_ERR() instead of checking for a NULL pointer when querying for
sev_pin_memory() failures. sev_pin_memory() always returns an error code
cast to a pointer, or a valid pointer; it never returns NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210506175826.2166383-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Return -EFAULT if copy_to_user() fails; if accessing user memory faults,
copy_to_user() returns the number of bytes remaining, not an error code.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Steve Rutherford <srutherford@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210506175826.2166383-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In theory there are no side effects of not intercepting #SMI,
because then #SMI becomes transparent to the OS and the KVM.
Plus an observation on recent Zen2 CPUs reveals that these
CPUs ignore #SMI interception and never deliver #SMI VMexits.
This is also useful to test nested KVM to see that L1
handles #SMIs correctly in case when L1 doesn't intercept #SMI.
Finally the default remains the same, the SMI are intercepted
by default thus this patch doesn't have any effect unless
non default module param value is used.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Kernel never sends real INIT even to CPUs, other than on boot.
Thus INIT interception is an error which should be caught
by a check for an unknown VMexit reason.
On top of that, the current INIT VM exit handler skips
the current instruction which is wrong.
That was added in commit 5ff3a351f687 ("KVM: x86: Move trivial
instruction-based exit handlers to common code").
Fixes: 5ff3a351f687 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-3-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 5ff3a351f687 ("KVM: x86: Move trivial instruction-based
exit handlers to common code"), unfortunately made a mistake of
treating nop_on_interception and nop_interception in the same way.
Former does truly nothing while the latter skips the instruction.
SMI VM exit handler should do nothing.
(SMI itself is handled by the host when we do STGI)
Fixes: 5ff3a351f687 ("KVM: x86: Move trivial instruction-based exit handlers to common code")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210707125100.677203-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vmx_msr_index was used to record the list of MSRs which can be lazily
restored when kvm returns to userspace. It is now reimplemented as
kvm_uret_msrs_list, a common x86 list which is only used inside x86.c.
So just remove the obsolete declaration in vmx.h.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Message-Id: <20210707235702.31595-1-yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When the host is using debug registers but the guest is not using them
nor is the guest in guest-debug state, the kvm code does not reset
the host debug registers before kvm_x86->run(). Rather, it relies on
the hardware vmentry instruction to automatically reset the dr7 registers
which ensures that the host breakpoints do not affect the guest.
This however violates the non-instrumentable nature around VM entry
and exit; for example, when a host breakpoint is set on vcpu->arch.cr2,
Another issue is consistency. When the guest debug registers are active,
the host breakpoints are reset before kvm_x86->run(). But when the
guest debug registers are inactive, the host breakpoints are delayed to
be disabled. The host tracing tools may see different results depending
on what the guest is doing.
To fix the problems, we clear %db7 unconditionally before kvm_x86->run()
if the host has set any breakpoints, no matter if the guest is using
them or not.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210628172632.81029-1-jiangshanlai@gmail.com>
Cc: stable@vger.kernel.org
[Only clear %db7 instead of reloading all debug registers. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit a75a895e6457 ("KVM: selftests: Unconditionally use memslot 0 for
vaddr allocations") removed the memslot parameters from vm_vaddr_alloc.
It addressed all callers except one under lib/aarch64/, due to a race
with commit e3db7579ef35 ("KVM: selftests: Add exception handling
support for aarch64")
Fix the vm_vaddr_alloc call in lib/aarch64/processor.c.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20210702201042.4036162-1-ricarkol@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In commit bc9e9e672df9 ("KVM: debugfs: Reuse binary stats descriptors")
loop for filling debugfs_stat_data was copy-pasted 2 times, but
in the second loop pointers are saved over pointers allocated
in the first loop. All this causes is a memory leak, fix it.
Fixes: bc9e9e672df9 ("KVM: debugfs: Reuse binary stats descriptors")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210701195500.27097-1-paskripkin@gmail.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To help review changes related to AMD IOMMU.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1626296542-30454-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
|
|
Add a simple helper that filesystems can use in their parameter parser
to parse the "source" parameter. A few places open-coded this function
and that already caused a bug in the cgroup v1 parser that we fixed.
Let's make it harder to get this wrong by introducing a helper which
performs all necessary checks.
Link: https://syzkaller.appspot.com/bug?id=6312526aba5beae046fdae8f00399f87aab48b12
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following sequence can be used to trigger a UAF:
int fscontext_fd = fsopen("cgroup");
int fd_null = open("/dev/null, O_RDONLY);
int fsconfig(fscontext_fd, FSCONFIG_SET_FD, "source", fd_null);
close_range(3, ~0U, 0);
The cgroup v1 specific fs parser expects a string for the "source"
parameter. However, it is perfectly legitimate to e.g. specify a file
descriptor for the "source" parameter. The fs parser doesn't know what
a filesystem allows there. So it's a bug to assume that "source" is
always of type fs_value_is_string when it can reasonably also be
fs_value_is_file.
This assumption in the cgroup code causes a UAF because struct
fs_parameter uses a union for the actual value. Access to that union is
guarded by the param->type member. Since the cgroup paramter parser
didn't check param->type but unconditionally moved param->string into
fc->source a close on the fscontext_fd would trigger a UAF during
put_fs_context() which frees fc->source thereby freeing the file stashed
in param->file causing a UAF during a close of the fd_null.
Fix this by verifying that param->type is actually a string and report
an error if not.
In follow up patches I'll add a new generic helper that can be used here
and by other filesystems instead of this error-prone copy-pasta fix.
But fixing it in here first makes backporting a it to stable a lot
easier.
Fixes: 8d2451f4994f ("cgroup1: switch to option-by-option parsing")
Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@kernel.org>
Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
the SVM
The AMD platform does not support the functions Ah CPUID leaf. The returned
results for this entry should all remain zero just like the native does:
AMD host:
0x0000000a 0x00: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
(uncanny) AMD guest:
0x0000000a 0x00: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00008000
Fixes: cadbaa039b99 ("perf/x86/intel: Make anythread filter support conditional")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20210628074354.33848-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183
Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269
CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132
show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x110/0x164 lib/dump_stack.c:118
print_address_description+0x78/0x5c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report+0x148/0x1e4 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:183 [inline]
__asan_load8+0xb4/0xbc mm/kasan/generic.c:252
kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183
kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739
__invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
el0_svc_common arch/arm64/kernel/syscall.c:158 [inline]
do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220
el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367
el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383
el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670
Allocated by task 4269:
stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461
kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475
kmem_cache_alloc_trace include/linux/slab.h:450 [inline]
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:664 [inline]
kvm_vm_ioctl_register_coalesced_mmio+0x78/0x1cc arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:146
kvm_vm_ioctl+0x7e8/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3746
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739
__invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
el0_svc_common arch/arm64/kernel/syscall.c:158 [inline]
do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220
el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367
el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383
el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670
Freed by task 4269:
stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track+0x38/0x6c mm/kasan/common.c:56
kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355
__kasan_slab_free+0x124/0x150 mm/kasan/common.c:422
kasan_slab_free+0x10/0x1c mm/kasan/common.c:431
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kfree+0x104/0x38c mm/slub.c:4124
coalesced_mmio_destructor+0x94/0xa4 arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:102
kvm_iodevice_destructor include/kvm/iodev.h:61 [inline]
kvm_io_bus_unregister_dev+0x248/0x280 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:4374
kvm_vm_ioctl_unregister_coalesced_mmio+0x158/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:186
kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739
__invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
el0_svc_common arch/arm64/kernel/syscall.c:158 [inline]
do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220
el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367
el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383
el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670
If kvm_io_bus_unregister_dev() return -ENOMEM, we already call kvm_iodevice_destructor()
inside this function to delete 'struct kvm_coalesced_mmio_dev *dev' from list
and free the dev, but kvm_iodevice_destructor() is called again, it will lead
the above issue.
Let's check the the return value of kvm_io_bus_unregister_dev(), only call
kvm_iodevice_destructor() if the return value is 0.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Message-Id: <20210626070304.143456-1-wangkefeng.wang@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed", 2021-04-20)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't clear the C-bit in the #NPF handler, as it is a legal GPA bit for
non-SEV guests, and for SEV guests the C-bit is dropped before the GPA
hits the NPT in hardware. Clearing the bit for non-SEV guests causes KVM
to mishandle #NPFs with that collide with the host's C-bit.
Although the APM doesn't explicitly state that the C-bit is not reserved
for non-SEV, Tom Lendacky confirmed that the following snippet about the
effective reduction due to the C-bit does indeed apply only to SEV guests.
Note that because guest physical addresses are always translated
through the nested page tables, the size of the guest physical address
space is not impacted by any physical address space reduction indicated
in CPUID 8000_001F[EBX]. If the C-bit is a physical address bit however,
the guest physical address space is effectively reduced by 1 bit.
And for SEV guests, the APM clearly states that the bit is dropped before
walking the nested page tables.
If the C-bit is an address bit, this bit is masked from the guest
physical address when it is translated through the nested page tables.
Consequently, the hypervisor does not need to be aware of which pages
the guest has chosen to mark private.
Note, the bogus C-bit clearing was removed from legacy #PF handler in
commit 6d1b867d0456 ("KVM: SVM: Don't strip the C-bit from CR2 on #PF
interception").
Fixes: 0ede79e13224 ("KVM: SVM: Clear C-bit from the page fault address")
Cc: Peter Gonda <pgonda@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210625020354.431829-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ignore "dynamic" host adjustments to the physical address mask when
generating the masks for guest PTEs, i.e. the guest PA masks. The host
physical address space and guest physical address space are two different
beasts, e.g. even though SEV's C-bit is the same bit location for both
host and guest, disabling SME in the host (which clears shadow_me_mask)
does not affect the guest PTE->GPA "translation".
For non-SEV guests, not dropping bits is the correct behavior. Assuming
KVM and userspace correctly enumerate/configure guest MAXPHYADDR, bits
that are lost as collateral damage from memory encryption are treated as
reserved bits, i.e. KVM will never get to the point where it attempts to
generate a gfn using the affected bits. And if userspace wants to create
a bogus vCPU, then userspace gets to deal with the fallout of hardware
doing odd things with bad GPAs.
For SEV guests, not dropping the C-bit is technically wrong, but it's a
moot point because KVM can't read SEV guest's page tables in any case
since they're always encrypted. Not to mention that the current KVM code
is also broken since sme_me_mask does not have to be non-zero for SEV to
be supported by KVM. The proper fix would be to teach all of KVM to
correctly handle guest private memory, but that's a task for the future.
Fixes: d0ec49d4de90 ("kvm/x86/svm: Support Secure Memory Encryption within KVM")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-5-seanjc@google.com>
[Use a new header instead of adding header guards to paging_tmpl.h. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use boot_cpu_data.x86_phys_bits instead of the raw CPUID information to
enumerate the MAXPHYADDR for KVM guests when TDP is disabled (the guest
version is only relevant to NPT/TDP).
When using shadow paging, any reductions to the host's MAXPHYADDR apply
to KVM and its guests as well, i.e. using the raw CPUID info will cause
KVM to misreport the number of PA bits available to the guest.
Unconditionally zero out the "Physical Address bit reduction" entry.
For !TDP, the adjustment is already done, and for TDP enumerating the
host's reduction is wrong as the reduction does not apply to GPAs.
Fixes: 9af9b94068fb ("x86/cpu/AMD: Handle SME reduction in physical address size")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ignore the guest MAXPHYADDR reported by CPUID.0x8000_0008 if TDP, i.e.
NPT, is disabled, and instead use the host's MAXPHYADDR. Per AMD'S APM:
Maximum guest physical address size in bits. This number applies only
to guests using nested paging. When this field is zero, refer to the
PhysAddrSize field for the maximum guest physical address size.
Fixes: 24c82e576b78 ("KVM: Sanitize cpuid")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
enabled"
Let KVM load if EFER.NX=0 even if NX is supported, the analysis and
testing (or lack thereof) for the non-PAE host case was garbage.
If the kernel won't be using PAE paging, .Ldefault_entry in head_32.S
skips over the entire EFER sequence. Hopefully that can be changed in
the future to allow KVM to require EFER.NX, but the motivation behind
KVM's requirement isn't yet merged. Reverting and revisiting the mess
at a later date is by far the safest approach.
This reverts commit 8bbed95d2cb6e5de8a342d761a89b0a04faed7be.
Fixes: 8bbed95d2cb6 ("KVM: x86: WARN and reject loading KVM if NX is supported but not enabled")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210625001853.318148-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit b78f4a59669 ("KVM: selftests: Rename vm_handle_exception")
raced with a couple of new x86 tests, missing two vm_handle_exception
to vm_install_exception_handler conversions.
Help the two broken tests to catch up with the new world.
Cc: Andrew Jones <drjones@redhat.com>
CC: Ricardo Koller <ricarkol@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20210701071928.2971053-1-maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: selftests: Fixes
- provide memory model for IBM z196 and zEC12
- do not require 64GB of memory
|
|
Restore bits 39 to 32 at correct position.
It reverses the operation done in rk_dma_addr_dte_v2().
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210712101232.318589-1-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit 2b0140c69637e ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
fixes an issue of "sub-device is removed where the context entry is cleared
for all aliases". But this commit didn't consider the PASID entry and PASID
table in VT-d scalable mode. This fix increases the coverage of scalable
mode.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Fixes: 8038bdb855331 ("iommu/vt-d: Only clear real DMA device's context entries")
Fixes: 2b0140c69637e ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Cc: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210712071712.3416949-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This fixes a bug in context cache clear operation. The code was not
following the correct invalidation flow. A global device TLB invalidation
should be added after the IOTLB invalidation. At the same time, it
uses the domain ID from the context entry. But in scalable mode, the
domain ID is in PASID table entry, not context entry.
Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210712071315.3416543-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
QCOM IOMMU driver calls bus_set_iommu() for every IOMMU device controller,
what fails for the second and latter IOMMU devices. This is intended and
must be not fatal to the driver registration process. Also the cleanup
path should take care of the runtime PM state, what is missing in the
current patch. Revert relevant changes to the QCOM IOMMU driver until
a proper fix is prepared.
This partially reverts commit 249c9dc6aa0db74a0f7908efd04acf774e19b155.
Fixes: 249c9dc6aa0d ("iommu/arm: Cleanup resources in case of probe error path")
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210705065657.30356-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
dsa_switch_bridge_leave()
This was not caught because there is no switch driver which implements
the .port_bridge_join but not .port_bridge_leave method, but it should
nonetheless be fixed, as in certain conditions (driver development) it
might lead to NULL pointer dereference.
Fixes: f66a6a69f97a ("net: dsa: permit cross-chip bridging between all trees in the system")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux
Pull vboxsf fixes from Hans de Goede:
"This adds support for the atomic_open directory-inode op to vboxsf.
Note this is not just an enhancement this also fixes an actual issue
which users are hitting, see the commit message of the "boxsf: Add
support for the atomic_open directory-inode" patch"
* tag 'vboxsf-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux:
vboxsf: Add support for the atomic_open directory-inode op
vboxsf: Add vboxsf_[create|release]_sf_handle() helpers
vboxsf: Make vboxsf_dir_create() return the handle for the created file
vboxsf: Honor excl flag to the dir-inode create op
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs zoned mode fixes from David Sterba:
- fix deadlock when allocating system chunk
- fix wrong mutex unlock on an error path
- fix extent map splitting for append operation
- update and fix message reporting unusable chunk space
- don't block when background zone reclaim runs with balance in
parallel
* tag 'for-5.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix wrong mutex unlock on failure to allocate log root tree
btrfs: don't block if we can't acquire the reclaim lock
btrfs: properly split extent_map for REQ_OP_ZONE_APPEND
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array
btrfs: fix deadlock with concurrent chunk allocations involving system chunks
btrfs: zoned: print unusable percentage when reclaiming block groups
btrfs: zoned: fix types for u64 division in btrfs_reclaim_bgs_work
|
|
Íñigo Huguet says:
====================
sfc: Fix lack of XDP TX queues
A change introduced in commit e26ca4b53582 ("sfc: reduce the number of
requested xdp ev queues") created a bug in XDP_TX and XDP_REDIRECT
because it unintentionally reduced the number of XDP TX queues, letting
not enough queues to have one per CPU, which leaded to errors if XDP
TX/REDIRECT was done from a high numbered CPU.
This patchs make the following changes:
- Fix the bug mentioned above
- Revert commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with
the real number of initialized queues") which intended to fix a related
problem, created by mentioned bug, but it's no longer necessary
- Add a new error log message if there are not enough resources to make
XDP_TX/REDIRECT work
V1 -> V2: keep the calculation of how many tx queues can handle a single
event queue, but apply the "max. tx queues per channel" upper limit.
V2 -> V3: WARN_ON if the number of initialized XDP TXQs differs from the
expected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If it's not possible to allocate enough channels for XDP, XDP_TX and
XDP_REDIRECT don't work. However, only a message saying that not enough
channels were available was shown, but not saying what are the
consequences in that case. The user didn't know if he/she can use XDP
or not, if the performance is reduced, or what.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with the real
number of initialized queues") intended to fix a problem caused by a
round up when calculating the number of XDP channels and queues.
However, this was not the real problem. The real problem was that the
number of XDP TX queues had been reduced to half in
commit e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues"),
but the variable xdp_tx_queue_count had remained the same.
Once the correct number of XDP TX queues is created again in the
previous patch of this series, this also can be reverted since the error
doesn't actually exist.
Only in the case that there is a bug in the code we can have different
values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this,
and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it
happens again in the future.
Note that the number of allocated queues can be higher than the number
of used ones due to the round up, as explained in the existing comment
in the code. That's why we also have to stop increasing xdp_queue_number
beyond efx->xdp_tx_queue_count.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: e26ca4b53582 sfc: reduce the number of requested xdp ev queues
The buggy commit intended to allocate less channels for XDP in order to
be more unlikely to reach the limit of 32 channels of the driver.
The idea was to use each IRQ/eventqeue for more XDP TX queues than
before, calculating which is the maximum number of TX queues that one
event queue can handle. For example, in EF10 each event queue could
handle up to 8 queues, better than the 4 they were handling before the
change. This way, it would have to allocate half of channels than before
for XDP TX.
The problem is that the TX queues are also contained inside the channel
structs, and there are only 4 queues per channel. Reducing the number of
channels means also reducing the number of queues, resulting in not
having the desired number of 1 queue per CPU.
This leads to getting errors on XDP_TX and XDP_REDIRECT if they're
executed from a high numbered CPU, because there only exist queues for
the low half of CPUs, actually. If XDP_TX/REDIRECT is executed in a low
numbered CPU, the error doesn't happen. This is the error in the logs
(repeated many times, even rate limited):
sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22)
This errors happens in function efx_xdp_tx_buffers, where it expects to
have a dedicated XDP TX queue per CPU.
Reverting the change makes again more likely to reach the limit of 32
channels in machines with many CPUs. If this happen, no XDP_TX/REDIRECT
will be possible at all, and we will have this log error messages:
At interface probe:
sfc 0000:5e:00.0: Insufficient resources for 12 XDP event queues (24 other channels, max 32)
At every subsequent XDP_TX/REDIRECT failure, rate limited:
sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22)
However, without reverting the change, it makes the user to think that
everything is OK at probe time, but later it fails in an unpredictable
way, depending on the CPU that handles the packet.
It is better to restore the predictable behaviour. If the user sees the
error message at probe time, he/she can try to configure the best way it
fits his/her needs. At least, he/she will have 2 options:
- Accept that XDP_TX/REDIRECT is not available (he/she may not need it)
- Load sfc module with modparam 'rss_cpus' with a lower number, thus
creating less normal RX queues/channels, letting more free resources
for XDP, with some performance penalty.
Anyway, let the calculation of maximum TX queues that can be handled by
a single event queue, and use it only if it's less than the number of TX
queues per channel. This doesn't happen in practice, but could happen if
some constant values are tweaked in the future, such us
EFX_MAX_TXQ_PER_CHANNEL, EFX_MAX_EVQ_SIZE or EFX_MAX_DMAQ_SIZE.
Related mailing list thread:
https://lore.kernel.org/bpf/20201215104327.2be76156@carbon/
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fp is netdev private data and it cannot be
used after free_netdev() call. Using fp after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() after error message.
Fixes: 61414f5ec983 ("FDDI: defza: Add support for DEC FDDIcontroller 700
TURBOchannel adapter")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In May 2019 when commit 640f763f98c2 ("net: dsa: sja1105: Add support
for Spanning Tree Protocol") was introduced, the comment that "STP does
not get called for the CPU port" was true. This changed after commit
0394a63acfe2 ("net: dsa: enable and disable all ports") in August 2019
and went largely unnoticed, because the sja1105_bridge_stp_state_set()
method did nothing different compared to the static setup done by
sja1105_init_mac_settings().
With the ability to turn address learning off introduced by the blamed
commit, there is a new priv->learn_ena port mask in the driver. When
sja1105_bridge_stp_state_set() gets called and we are in
BR_STATE_LEARNING or later, address learning is enabled or not depending
on priv->learn_ena & BIT(port).
So what happens is that priv->learn_ena is not being set from anywhere
for the CPU port, and the static configuration done by
sja1105_init_mac_settings() is being overwritten.
To solve this, acknowledge that the static configuration of STP state is
no longer necessary because the STP state is being set by the DSA core
now, but what is necessary is to set priv->learn_ena for the CPU port.
Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The point with a *dev and a *brport_dev is that when we have a LAG net
device that is a bridge port, *dev is an ocelot net device and
*brport_dev is the bonding/team net device. The ocelot net device
beneath the LAG does not exist from the bridge's perspective, so we need
to sync the switchdev objects belonging to the brport_dev and not to the
dev.
Fixes: e4bd44e89dcf ("net: ocelot: replay switchdev events when joining bridge")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast()
instead of netlink_unicast(), this looks more concise.
v2: remove the change in netfilter.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No need to give up the original sd minor even with this option,
and if we did we'd also need to fix the number of minors for
this configuration to actually work.
Fixes: 7c3f828b522b0 ("block: refactor device number setup in __device_add_disk")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rewrite copy_huge_page() and move it into mm/util.c so it's always
available. Fixes an exposure of uninitialised memory on configurations
with HUGETLB and UFFD enabled and MIGRATION disabled.
Fixes: 8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many thanks to Kirill for reminding that PageDoubleMap cannot be relied on
to warn of pte mappings in the Anon THP case; and a scan of subpages does
not seem appropriate here. Note how follow_trans_huge_pmd() does not even
mark an Anon THP as mlocked when compound_mapcount != 1: multiple mlocking
of Anon THP is avoided, so simply return from page_mlock() in this case.
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Fixes: d9770fcc1c0c ("mm/rmap: fix old bug: munlocking THP missed other mlocks")
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the case where act->id is FLOW_ACTION_POLICE and also
act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0
the boolean variable pps contains an uninitialized value when
function otx2_tc_act_set_police is called. Fix this by initializing
pps to false.
Addresses-Coverity: ("Uninitialized scalar variable)"
Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
