| Age | Commit message (Collapse) | Author |
|---|
|
The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only
to archs where they work") caused that bpf_probe_read{, str}() functions
were not longer available on architectures where the same logical address
might have different content in kernel and user memory mapping. These
architectures should use probe_read_{user,kernel}_str helpers.
For backward compatibility, the problematic functions are still available
on architectures where the user and kernel address spaces are not
overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
At the moment, these backward compatible functions are enabled only on x86_64,
arm, and arm64. Let's do it also on powerpc that has the non overlapping
address space as well.
Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com
|
|
Pull NVMe poll fix from Christoph.
* 'nvme-5.7' of git://git.infradead.org/nvme:
nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
|
|
If boot_secondary() was successful, and cpu_online() was an error in
__cpu_up(), -EIO was returned, but 0 is returned by commit d22b115cbfbb7
("arm64/kernel: Simplify __cpu_up() by bailing out early").
Therefore, bringup_wait_for_ap() causes the primary core to wait for a
long time, which may cause boot failure.
This commit sets -EIO to return code under the same conditions.
Fixes: d22b115cbfbb ("arm64/kernel: Simplify __cpu_up() by bailing out early")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Tested-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Will Deacon <will@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200527233457.2531118-1-nobuhiro1.iwamatsu@toshiba.co.jp
[catalin.marinas@arm.com: return -EIO at the end of the function]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.7-2020-05-27:
amdgpu:
- Display atomic test fix
- Fix soft hang in display vupdate code
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527222700.4378-1-alexander.deucher@amd.com
|
|
Put the rseq_syscall check point at the prologue of the syscall
will break the a0 ... a7. This will casue system call bug when
DEBUG_RSEQ is enabled.
So move it to the epilogue of syscall, but before syscall_trace.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
There is no fixup or feature in the patch, we only cleanup with:
- Remove unnecessary reg used (r11, r12), just use r9 & r10 &
syscallid regs as temp useage.
- Add _TIF_SYSCALL_WORK and _TIF_WORK_MASK to gather macros.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
Current implementation could destory a4 & a5 when strace, so we need to get them
from pt_regs by SAVE_ALL.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
log:
[ 0.13373200] Calibrating delay loop...
[ 0.14077600] ------------[ cut here ]------------
[ 0.14116700] WARNING: CPU: 0 PID: 0 at kernel/sched/core.c:3790 preempt_count_add+0xc8/0x11c
[ 0.14348000] DEBUG_LOCKS_WARN_ON((preempt_count() < 0))Modules linked in:
[ 0.14395100] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0 #7
[ 0.14410800]
[ 0.14427400] Call Trace:
[ 0.14450700] [<807cd226>] dump_stack+0x8a/0xe4
[ 0.14473500] [<80072792>] __warn+0x10e/0x15c
[ 0.14495900] [<80072852>] warn_slowpath_fmt+0x72/0xc0
[ 0.14518600] [<800a5240>] preempt_count_add+0xc8/0x11c
[ 0.14544900] [<807ef918>] _raw_spin_lock+0x28/0x68
[ 0.14572600] [<800e0eb8>] vprintk_emit+0x84/0x2d8
[ 0.14599000] [<800e113a>] vprintk_default+0x2e/0x44
[ 0.14625100] [<800e2042>] vprintk_func+0x12a/0x1d0
[ 0.14651300] [<800e1804>] printk+0x30/0x48
[ 0.14677600] [<80008052>] lockdep_init+0x12/0xb0
[ 0.14703800] [<80002080>] start_kernel+0x558/0x7f8
[ 0.14730000] [<800052bc>] csky_start+0x58/0x94
[ 0.14756600] irq event stamp: 34
[ 0.14775100] hardirqs last enabled at (33): [<80067370>] ret_from_exception+0x2c/0x72
[ 0.14793700] hardirqs last disabled at (34): [<800e0eae>] vprintk_emit+0x7a/0x2d8
[ 0.14812300] softirqs last enabled at (32): [<800655b0>] __do_softirq+0x578/0x6d8
[ 0.14830800] softirqs last disabled at (25): [<8007b3b8>] irq_exit+0xec/0x128
The preempt_count of reg could be destroyed after csky_do_IRQ without reload
from memory.
After reference to other architectures (arm64, riscv), we move preempt entry
into ret_from_exception and disable irq at the beginning of
ret_from_exception instead of RESTORE_ALL.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reported-by: Lu Baoquan <lu.baoquan@intellif.com>
|
|
When connected mode is set, and we have connected and datagram traffic in
parallel, ipoib might crash with double free of datagram skb.
The current mechanism assumes that the order in the completion queue is
the same as the order of sent packets for all QPs. Order is kept only for
specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and
few CM's) in parallel.
The problem:
----------------------------------------------------------
Transmit queue:
-----------------
UD skb pointer kept in queue itself, CM skb kept in spearate queue and
uses transmit queue as a placeholder to count the number of total
transmitted packets.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^
tail head
Completion queue (problematic scenario) - the order not the same as in
the transmit queue:
1 2 3 4 5 6 7 8 9
------------------------------------
ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5
------------------------------------
1. CM1 'wc' processing
- skb freed in cm separate ring.
- tx_tail of transmit queue increased although UD2 is not freed.
Now driver assumes UD2 index is already freed and it could be used for
new transmitted skb.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127
------------------------------------------------------------
NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
^ ^ ^
(Bad)tail head
(Bad - Could be used for new SKB)
In this case (due to heavy load) UD2 skb pointer could be replaced by new
transmitted packet UD_NEW, as the driver assumes its free. At this point
we will have to process two 'wc' with same index but we have only one
pointer to free.
During second attempt to free the same skb we will have NULL pointer
exception.
2. UD2 'wc' processing
- skb freed according the index we got from 'wc', but it was already
overwritten by mistake. So actually the skb that was released is the
skb of the new transmitted packet and not the original one.
3. UD_NEW 'wc' processing
- attempt to free already freed skb. NUll pointer exception.
The fix:
-----------------------------------------------------------------------
The fix is to stop using the UD ring as a placeholder for CM packets, the
cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a
new cyclic variables global_tx_head and global_tx_tail are introduced for
managing and counting the overall outstanding sent packets, then the send
queue will be stopped and waken based on these variables only.
Note that no locking is needed since global_tx_head is updated in the xmit
flow and global_tx_tail is updated in the NAPI flow only. A previous
attempt tried to use one variable to count the outstanding sent packets,
but it did not work since xmit and NAPI flows can run at the same time and
the counter will be updated wrongly. Thus, we use the same simple cyclic
head and tail scheme that we have today for the UD tx_ring.
Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes")
Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
[Why]
If VUPDATE_END is before VUPDATE_START the delay calculated can become
very large, causing a soft hang.
[How]
Take the absolute value of the difference between START and END.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
get_cursor_position already handles the case where the cursor has
negative off-screen coordinates by not setting
dc_cursor_position.enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Be there a platform with the following layout:
Regular NIC
|
+----> DSA master for switch port
|
+----> DSA master for another switch port
After changing DSA back to static lockdep class keys in commit
1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), this
kernel splat can be seen:
[ 13.361198] ============================================
[ 13.366524] WARNING: possible recursive locking detected
[ 13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted
[ 13.377874] --------------------------------------------
[ 13.383201] swapper/0/0 is trying to acquire lock:
[ 13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[ 13.397879]
[ 13.397879] but task is already holding lock:
[ 13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[ 13.413593]
[ 13.413593] other info that might help us debug this:
[ 13.420140] Possible unsafe locking scenario:
[ 13.420140]
[ 13.426075] CPU0
[ 13.428523] ----
[ 13.430969] lock(&dsa_slave_netdev_xmit_lock_key);
[ 13.435946] lock(&dsa_slave_netdev_xmit_lock_key);
[ 13.440924]
[ 13.440924] *** DEADLOCK ***
[ 13.440924]
[ 13.446860] May be due to missing lock nesting notation
[ 13.446860]
[ 13.453668] 6 locks held by swapper/0/0:
[ 13.457598] #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400
[ 13.466593] #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560
[ 13.474803] #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10
[ 13.483886] #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0
[ 13.492793] #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[ 13.503094] #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0
[ 13.512000]
[ 13.512000] stack backtrace:
[ 13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988
[ 13.530421] Call trace:
[ 13.532871] dump_backtrace+0x0/0x1d8
[ 13.536539] show_stack+0x24/0x30
[ 13.539862] dump_stack+0xe8/0x150
[ 13.543271] __lock_acquire+0x1030/0x1678
[ 13.547290] lock_acquire+0xf8/0x458
[ 13.550873] _raw_spin_lock+0x44/0x58
[ 13.554543] __dev_queue_xmit+0x84c/0xbe0
[ 13.558562] dev_queue_xmit+0x24/0x30
[ 13.562232] dsa_slave_xmit+0xe0/0x128
[ 13.565988] dev_hard_start_xmit+0xf4/0x448
[ 13.570182] __dev_queue_xmit+0x808/0xbe0
[ 13.574200] dev_queue_xmit+0x24/0x30
[ 13.577869] neigh_resolve_output+0x15c/0x220
[ 13.582237] ip6_finish_output2+0x244/0xb10
[ 13.586430] __ip6_finish_output+0x1dc/0x298
[ 13.590709] ip6_output+0x84/0x358
[ 13.594116] mld_sendpack+0x2bc/0x560
[ 13.597786] mld_ifc_timer_expire+0x210/0x390
[ 13.602153] call_timer_fn+0xcc/0x400
[ 13.605822] run_timer_softirq+0x588/0x6e0
[ 13.609927] __do_softirq+0x118/0x590
[ 13.613597] irq_exit+0x13c/0x148
[ 13.616918] __handle_domain_irq+0x6c/0xc0
[ 13.621023] gic_handle_irq+0x6c/0x160
[ 13.624779] el1_irq+0xbc/0x180
[ 13.627927] cpuidle_enter_state+0xb4/0x4d0
[ 13.632120] cpuidle_enter+0x3c/0x50
[ 13.635703] call_cpuidle+0x44/0x78
[ 13.639199] do_idle+0x228/0x2c8
[ 13.642433] cpu_startup_entry+0x2c/0x48
[ 13.646363] rest_init+0x1ac/0x280
[ 13.649773] arch_call_rest_init+0x14/0x1c
[ 13.653878] start_kernel+0x490/0x4bc
Lockdep keys themselves were added in commit ab92d68fc22f ("net: core:
add generic lockdep keys"), and it's very likely that this splat existed
since then, but I have no real way to check, since this stacked platform
wasn't supported by mainline back then.
>From Taehee's own words:
This patch was considered that all stackable devices have LLTX flag.
But the dsa doesn't have LLTX, so this splat happened.
After this patch, dsa shares the same lockdep class key.
On the nested dsa interface architecture, which you illustrated,
the same lockdep class key will be used in __dev_queue_xmit() because
dsa doesn't have LLTX.
So that lockdep detects deadlock because the same lockdep class key is
used recursively although actually the different locks are used.
There are some ways to fix this problem.
1. using NETIF_F_LLTX flag.
If possible, using the LLTX flag is a very clear way for it.
But I'm so sorry I don't know whether the dsa could have LLTX or not.
2. using dynamic lockdep again.
It means that each interface uses a separate lockdep class key.
So, lockdep will not detect recursive locking.
But this way has a problem that it could consume lockdep class key
too many.
Currently, lockdep can have 8192 lockdep class keys.
- you can see this number with the following command.
cat /proc/lockdep_stats
lock-classes: 1251 [max: 8192]
...
The [max: 8192] means that the maximum number of lockdep class keys.
If too many lockdep class keys are registered, lockdep stops to work.
So, using a dynamic(separated) lockdep class key should be considered
carefully.
In addition, updating lockdep class key routine might have to be existing.
(lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key())
3. Using lockdep subclass.
A lockdep class key could have 8 subclasses.
The different subclass is considered different locks by lockdep
infrastructure.
But "lock-classes" is not counted by subclasses.
So, it could avoid stopping lockdep infrastructure by an overflow of
lockdep class keys.
This approach should also have an updating lockdep class key routine.
(lockdep_set_subclass())
4. Using nonvalidate lockdep class key.
The lockdep infrastructure supports nonvalidate lockdep class key type.
It means this lockdep is not validated by lockdep infrastructure.
So, the splat will not happen but lockdep couldn't detect real deadlock
case because lockdep really doesn't validate it.
I think this should be used for really special cases.
(lockdep_set_novalidate_class())
Further discussion here:
https://patchwork.ozlabs.org/project/netdev/patch/20200503052220.4536-2-xiyou.wangcong@gmail.com/
There appears to be no negative side-effect to declaring lockless TX for
the DSA virtual interfaces, which means they handle their own locking.
So that's what we do to make the splat go away.
Patch tested in a wide variety of cases: unicast, multicast, PTP, etc.
Fixes: ab92d68fc22f ("net: core: add generic lockdep keys")
Suggested-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
copy the corresponding pieces of init_fpstate into the gaps instead.
Cc: stable@kernel.org
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
As explained in other commits before (b9cd75e66895 and 87b0f983f66f),
ocelot switches have a single egress-untagged VLAN per port, and the
driver would deny adding a second one while an egress-untagged VLAN
already exists.
But on the CPU port (where the VLAN configuration is implicit, because
there is no net device for the bridge to control), the DSA core attempts
to add a VLAN using the same flags as were used for the front-panel
port. This would make adding any untagged VLAN fail due to the CPU port
rejecting the configuration:
bridge vlan add dev swp0 vid 100 pvid untagged
[ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1
[ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16
(note that port 5 is the CPU port and not the front-panel swp0).
So this hardware will send all VLANs as tagged towards the CPU.
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang-10 and clang-11 run into a corner case of the register
allocator on 32-bit ARM, leading to excessive stack usage from
register spilling:
net/bridge/br_multicast.c:2422:6: error: stack frame size of 1472 bytes in function 'br_multicast_get_stats' [-Werror,-Wframe-larger-than=]
Work around this by marking one of the internal functions as
noinline_for_stack.
Link: https://bugs.llvm.org/show_bug.cgi?id=45802#c9
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There may be a race between nvme_reap_pending_cqes() and nvme_poll(), e.g.,
when doing live reset while polling the nvme device.
CPU X CPU Y
nvme_poll()
nvme_dev_disable()
-> nvme_stop_queues()
-> nvme_suspend_io_queues()
-> nvme_suspend_queue()
-> spin_lock(&nvmeq->cq_poll_lock);
-> nvme_reap_pending_cqes()
-> nvme_process_cq() -> nvme_process_cq()
In the above scenario, the nvme_process_cq() for the same queue may be
running on both CPU X and CPU Y concurrently.
It is much more easier to reproduce the issue when CONFIG_PREEMPT is
enabled in kernel. When CONFIG_PREEMPT is disabled, it would take longer
time for nvme_stop_queues()-->blk_mq_quiesce_queue() to wait for grace
period.
This patch protects nvme_process_cq() with nvmeq->cq_poll_lock in
nvme_reap_pending_cqes().
Fixes: fa46c6fb5d61 ("nvme/pci: move cqe check after device shutdown")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The accept(2) is an "input" socket interface, so we should use
SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout.
So this patch replace sock_sndtimeo() with sock_rcvtimeo() to
use the right timeout in the vsock_accept().
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this change the correct value for the used counter is calculated
but not stored nor, therefore, propagated to user-space. In use-cases such
as OVS use-case at least this results in active flows being removed from
the hardware datapath. Which results in both unnecessary flow tear-down
and setup, and packet processing on the host.
This patch addresses the problem by saving the calculated used value
which allows the value to propagate to user-space.
Found by inspection.
Fixes: aa6ce2ea0c93 ("nfp: flower: support stats update for merge flows")
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
this command hangs forever:
# tc qdisc add dev eth0 root fq_pie flows 65536
watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028]
[...]
CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ #167
RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie]
Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48
RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff
RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590
RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699
R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0
R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8
FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0
Call Trace:
qdisc_create+0x3fd/0xeb0
tc_modify_qdisc+0x3be/0x14a0
rtnetlink_rcv_msg+0x5f3/0x920
netlink_rcv_skb+0x121/0x350
netlink_unicast+0x439/0x630
netlink_sendmsg+0x714/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5b4/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x9a/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
we can't accept 65536 as a valid number for 'nflows', because the loop on
'idx' in fq_pie_init() will never end. The extack message is correct, but
it doesn't say that 0 is not a valid number for 'flows': while at it, fix
this also. Add a tdc selftest to check correct validation of 'flows'.
CC: Ivan Vecera <ivecera@redhat.com>
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fanotify FAN_DIR_MODIFY disabling from Jan Kara:
"A single patch that disables FAN_DIR_MODIFY support that was merged in
this merge window.
When discussing further functionality we realized it may be more
logical to guard it with a feature flag or to call things slightly
differently (or maybe not) so let's not set the API in stone for now."
* tag 'fsnotify_for_v5.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: turn off support for FAN_DIR_MODIFY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Reverted stricter synchronization for cgroup recursive stats which
was prepping it for event counter usage which never got merged. The
change was causing performation regressions in some cases.
- Restore bpf-based device-cgroup operation even when cgroup1 device
cgroup is disabled.
- An out-param init fix.
* 'for-5.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: Cleanup cgroup eBPF device filter code
xattr: fix uninitialized out-param
Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"
|
|
Fix use after free when user user space request uobject concurrently for
the same object, within the RCU grace period.
In that case, remove_handle_idr_uobject() is called twice and we will have
an extra put on the uobject which cause use after free. Fix it by leaving
the uobject write locked after it was removed from the idr.
Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of
UVERBS_LOOKUP_WRITE will do the work.
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x94/0xce
panic+0x234/0x56f
__warn+0x1cc/0x1e1
report_bug+0x200/0x310
fixup_bug.part.11+0x32/0x80
do_error_trap+0xd3/0x100
do_invalid_op+0x31/0x40
invalid_op+0x1e/0x30
RIP: 0010:refcount_warn_saturate+0xfe/0x1a0
Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c
RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc
RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3
R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c
R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08
uverbs_uobject_put+0xfd/0x140
__uobj_perform_destroy+0x3d/0x60
ib_uverbs_close_xrcd+0x148/0x170
ib_uverbs_write+0xaa5/0xdf0
__vfs_write+0x7c/0x100
vfs_write+0x168/0x4a0
ksys_write+0xc8/0x200
do_syscall_64+0x9c/0x390
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x465b49
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49
RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc
R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes: 7452a3c745a2 ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate")
Link: https://lore.kernel.org/r/20200527135534.482279-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
FAN_DIR_MODIFY has been enabled by commit 44d705b0370b ("fanotify:
report name info for FAN_DIR_MODIFY event") in 5.7-rc1. Now we are
planning further extensions to the fanotify API and during that we
realized that FAN_DIR_MODIFY may behave slightly differently to be more
consistent with extensions we plan. So until we finalize these
extensions, let's not bind our hands with exposing FAN_DIR_MODIFY to
userland.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve fix from Eric Biederman:
"While working on my exec cleanups I found a bug in exec that winds up
miscomputing the ambient credentials during exec. Andy appears to have
to been confused as to why credentials are computed for both the
script and the interpreter
From the original patch description:
[3] Linux very confusingly processes both the script and the
interpreter if applicable, for reasons that elude me. The results
from thinking about a script's file capabilities and/or setuid
bits are mostly discarded.
The only value in struct cred that gets changed in cap_bprm_set_creds
that I could find that might persist between the script and the
interpreter was cap_ambient. Which is fixed with this trivial change"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
exec: Always set cap_ambient in cap_bprm_set_creds
|
|
There is a generic, kernel wide configuration symbol for enabling the
IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including
INTEL_IOMMU and AMD_IOMMU driver) select it so use it here as well.
This makes the conditional archdata.iommu field consistent with other
platforms and also fixes any compile test builds of other IOMMU drivers,
when INTEL_IOMMU or AMD_IOMMU are not selected).
For the case when INTEL_IOMMU/AMD_IOMMU and COMPILE_TEST are not
selected, this should create functionally equivalent code/choice. With
COMPILE_TEST this field could appear if other IOMMU drivers are chosen
but neither INTEL_IOMMU nor AMD_IOMMU are not.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200518120855.27822-2-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a generic, kernel wide configuration symbol for enabling the
IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including
INTEL_IOMMU driver) select it so use it here as well.
This makes the conditional archdata.iommu field consistent with other
platforms and also fixes any compile test builds of other IOMMU drivers,
when INTEL_IOMMU is not selected).
For the case when INTEL_IOMMU and COMPILE_TEST are not selected, this
should create functionally equivalent code/choice. With COMPILE_TEST
this field could appear if other IOMMU drivers are chosen but
INTEL_IOMMU not.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200518120855.27822-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio fixes for v5.7
- fix mutex and spinlock ordering in gpio-mlxbf2
- fix the return value checks on devm_platform_ioremap_resource in
gpio-pxa and gpio-bcm-kona
|
|
>> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
extern const char *const pptp_msg_name(u_int16_t msg);
^~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 4c559f15efcc ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
net/netfilter/nf_conntrack_core.c: In function nf_confirm_cthelper:
net/netfilter/nf_conntrack_core.c:2117:15: warning: comparison of unsigned expression in < 0 is always false [-Wtype-limits]
2117 | if (protoff < 0 || (frag_off & htons(~0x7)) != 0)
| ^
ipv6_skip_exthdr() returns a signed integer.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 703acd70f249 ("netfilter: nfnetlink_cthelper: unbreak userspace helper support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Clang warns:
net/netfilter/nf_conntrack_core.c:2068:21: warning: variable 'ctinfo' is
uninitialized when used here [-Wuninitialized]
nf_ct_set(skb, ct, ctinfo);
^~~~~~
net/netfilter/nf_conntrack_core.c:2024:2: note: variable 'ctinfo' is
declared here
enum ip_conntrack_info ctinfo;
^
1 warning generated.
nf_conntrack_update was split up into nf_conntrack_update and
__nf_conntrack_update, where the assignment of ctinfo is in
nf_conntrack_update but it is used in __nf_conntrack_update.
Pass the value of ctinfo from nf_conntrack_update to
__nf_conntrack_update so that uninitialized memory is not used
and everything works properly.
Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again")
Link: https://github.com/ClangBuiltLinux/linux/issues/1039
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
It's possible for the VFS to completely forget about an inode, but for
it to still be sitting on the cap release queue. If the MDS sends the
client a cap message for such an inode, it just ignores it today, which
can lead to a stall of up to 5s until the cap release queue is flushed.
If we get a cap message for an inode that can't be located, then go
ahead and flush the cap release queue.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/45532
Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped")
Reported-and-Tested-by: Andrej Filipčič <andrej.filipcic@ijs.si>
Suggested-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.
[ idryomov: Redirects are effectively deprecated and no longer
used or tested. The original tiering modes based on redirects
are inherently flawed because redirects can race and reorder,
potentially resulting in data corruption. The new proxy and
readproxy tiering modes should be used instead of forward and
readforward. Still marking for stable as obviously correct,
though. ]
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406
Signed-off-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable new codec supported for ALC287.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/dcf5ce5507104d0589a917cbb71dc3c6@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp()
Fixes: 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a"
instead of the already included PNP ID "LEN006c". However, my touchpad
seems to work well without any problems using RMI. So this patch adds the
other PNP ID.
Signed-off-by: Dennis Kadioglu <denk@eclipso.email>
Link: https://lore.kernel.org/r/ff770543cd53ae818363c0fe86477965@mail.eclipso.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices,
a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC
(USB ID 0414:a000). The latter serves solely for the headphone output
on the front panel while the former serves for the rest I/Os (mostly
for the I/Os in the rear panel but also including the front mic).
Both chips do work more or less with the unmodified USB-audio driver,
but there are a few glitches. The ALC1220-VB returns an error for an
inquiry to some jacks, as already seen on other TRX40-based mobos.
However this machine has a slightly incompatible configuration, hence
the existing mapping cannot be used as is.
Meanwhile the ESS chip seems working without any quirk. But since
both audio devices don't provide any specific names, both cards appear
as "USB-Audio", and it's quite confusing for users.
This patch is an attempt to overcome those issues:
- The specific mapping table for ALC1220-VB is provided, reducing the
non-working nodes and renaming the badly chosen controls.
The connector map isn't needed here unlike other TRX40 quirks.
- For both USB IDs (0414:a000 and 0414:a001), provide specific card
name strings, so that user-space can identify more easily; and more
importantly, UCM profile can be applied to each.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200526082810.29506-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change 'handeled' to 'handled' in the Kconfig help for SCTP.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes.
3 bnxt_en driver fixes, covering a bug in preserving the counters during
some resets, proper error code when flashing NVRAM fails, and an
endian bug when extracting the firmware response message length.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The explicit mask and shift is not the appropriate way to parse fields
out of a little endian struct. The length field is internally __le16
and the strategy employed only happens to work on little endian machines
because the offset used is actually incorrect (length is at offset 6).
Also remove the related and no longer used definitions from bnxt.h.
Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When NVRAM directory is not found, return the error code
properly as per firmware command failure instead of the hardcode
-ENOBUFS.
Fixes: 3a707bed13b7 ("bnxt_en: Return -EAGAIN if fw command returns BUSY")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have logic to maintain network counters across resets by storing
the counters in bp->net_stats_prev before reset. But not all resets
will clear the counters. Certain resets that don't need to change
the number of rings do not clear the counters. The current logic
accumulates the counters before all resets, causing big jumps in
the counters after some resets, such as ethtool -G.
Fix it by only accumulating the counters during reset if the irq_re_init
parameter is set. The parameter signifies that all rings and interrupts
will be reset and that means that the counters will also be reset.
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for Telit LE910C1-EUX composition
0x1031: tty, tty, tty, rmnet
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller again found a path to a kernel crash through bad gso input:
a packet with gso size exceeding len.
These packets are dropped in tcp_gso_segment and udp[46]_ufo_fragment.
But they may affect gso size calculations earlier in the path.
Now that we have thlen as of commit 9274124f023b ("net: stricter
validation of untrusted gso packets"), check gso_size at entry too.
Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the MPTCP receive path we must cope with TCP fallback
on blocking recvmsg(). Currently in such code path we detect
the fallback condition, but we don't fetch the struct socket
required for fallback.
The above allowed syzkaller to trigger a NULL pointer
dereference:
general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 1 PID: 7226 Comm: syz-executor523 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:sock_recvmsg_nosec net/socket.c:886 [inline]
RIP: 0010:sock_recvmsg+0x92/0x110 net/socket.c:904
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 6c 24 04 e8 53 18 1d fb 4d 8d 6f 20 4c 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 ef e8 20 12 5b fb bd a0 00 00 00 49 03 6d
RSP: 0018:ffffc90001077b98 EFLAGS: 00010202
RAX: 0000000000000004 RBX: ffffc90001077dc0 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff86565e59 R09: ffffed10115afeaa
R10: ffffed10115afeaa R11: 0000000000000000 R12: 1ffff9200020efbc
R13: 0000000000000020 R14: ffffc90001077de0 R15: 0000000000000000
FS: 00007fc6a3abe700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004d0050 CR3: 00000000969f0000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mptcp_recvmsg+0x18d5/0x19b0 net/mptcp/protocol.c:891
inet_recvmsg+0xf6/0x1d0 net/ipv4/af_inet.c:838
sock_recvmsg_nosec net/socket.c:886 [inline]
sock_recvmsg net/socket.c:904 [inline]
__sys_recvfrom+0x2f3/0x470 net/socket.c:2057
__do_sys_recvfrom net/socket.c:2075 [inline]
__se_sys_recvfrom net/socket.c:2071 [inline]
__x64_sys_recvfrom+0xda/0xf0 net/socket.c:2071
do_syscall_64+0xf3/0x1b0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Address the issue initializing the struct socket reference
before entering the fallback code.
Reported-and-tested-by: syzbot+c6bfc3db991edc918432@syzkaller.appspotmail.com
Suggested-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: 8ab183deb26a ("mptcp: cope with later TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation says that gpll0 is parent of gpll0_out_even, somehow
driver coded that as bi_tcxo, so fix it
Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
Reported-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200521052728.2141377-1-vkoul@kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The driver will always fail to probe without QCOM_GDSC, so select it.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lkml.kernel.org/r/20200523040947.31946-1-jonathan@marek.ca
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be
PTP v2/802.AS1, any layer, any kind of event packet, but HW only
take timestamp snapshot for below PTP message: sync, Pdelay_req,
Pdelay_resp.
Then it causes below issue when test E2E case:
ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp
ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp
ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp
ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp
ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp
ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp
ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp
ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp
ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp
Timestamp snapshot dependency on register bits in received path:
SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages
01 x 0 SYNC, Follow_Up, Delay_Req,
Delay_Resp, Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up
01 0 1 SYNC, Pdelay_Req, Pdelay_Resp
For dwmac v5.10a, enabling all events by setting register
DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA]
to 0’b0, which can support all required events.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Ahern says:
====================
nexthops: Fix 2 fundamental flaws with nexthop groups
Nik's torture tests have exposed 2 fundamental mistakes with the initial
nexthop code for groups. First, the nexthops entries and num_nh in the
nh_grp struct should not be modified once the struct is set under rcu.
Doing so has major affects on the datapath seeing valid nexthop entries.
Second, the helpers in the header file were convenient for not repeating
code, but they cause datapath walks to potentially see 2 different group
structs after an rcu replace, disrupting a walk of the path objects.
This second problem applies solely to IPv4 as I re-used too much of the
existing code in walking legs of a multipath route.
Patches 1 is refactoring change to simplify the overhead of reviewing and
understanding the change in patch 2 which fixes the update of nexthop
groups when a compnent leg is removed.
Patches 3-5 address the second problem. Patch 3 inlines the multipath
check such that the mpath lookup and subsequent calls all use the same
nh_grp struct. Patches 4 and 5 fix datapath uses of fib_info_num_path
with iterative calls to fib_info_nhc.
fib_info_num_path can be used in control plane path in a 'for loop' with
subsequent fib_info_nhc calls to get each leg since the nh_grp struct is
only changed while holding the rtnl; the combination can not be used in
the data plane with external nexthops as it involves repeated dereferences
of nh_grp struct which can change between calls.
Similarly, nexthop_is_multipath can be used for branching decisions in
the datapath since the nexthop type can not be changed (a group can not
be converted to standalone and vice versa).
Patch set developed in coordination with Nikolay Aleksandrov. He did a
lot of work creating a good reproducer, discussing options to fix it
and testing iterations.
I have adapted Nik's commands into additional tests in the nexthops
selftest script which I will send against -next.
v2
- fixed whitespace errors
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the last path, need to fix fib_info_nh_uses_dev for
external nexthops to avoid referencing multiple nh_grp structs.
Move the device check in fib_info_nh_uses_dev to a helper and
create a nexthop version that is called if the fib_info uses an
external nexthop.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
FIB lookups can return an entry that references an external nexthop.
While walking the nexthop struct we do not want to make multiple calls
into the nexthop code which can result in 2 different structs getting
accessed - one returning the number of paths the rest of the loop
seeing a different nh_grp struct. If the nexthop group shrunk, the
result is an attempt to access a fib_nh_common that does not exist for
the new nh_grp struct but did for the old one.
To fix that move the device evaluation code to a helper that can be
used for inline fib_nh path as well as external nexthops.
Update the existing check for fi->nh in fib_table_lookup to call a
new helper, nexthop_get_nhc_lookup, which walks the external nexthop
with a single rcu dereference.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
