summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-23r8169: fix cable re-plugging issueHeiner Kallweit
Bartek reported that after few cable unplug/replug cycles suddenly replug isn't detected any longer. His system uses a RTL8106, I wasn't able to reproduce the issue with RTL8168g. According to his bisect the referenced commit caused the regression. As Realtek doesn't release datasheets or errata it's hard to say what's the actual root cause, but this change was reported to fix the issue. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com> Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: ethernet: ti: fix possible object reference leakWen Yang
The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: ibm: fix possible object reference leakWen Yang
The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Douglas Miller <dougmill@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: xilinx: fix possible object reference leakWen Yang
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: phy: Re-parent menus for MDIO bus drivers correctlyFlorian Fainelli
After 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") the various MDIO bus drivers were no longer parented with config PHYLIB but with config MDIO_BUS which is not a menuconfig, fix this by depending on MDIO_DEVICE which is a menuconfig. This is visually nicer and less confusing for users. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes and improvements from Jens Axboe: "The first five in this series are heavily inspired by the work Al did on the aio side to fix the races there. The last two re-introduce a feature that was in io_uring before it got merged, but which I pulled since we didn't have a good way to have BVEC iters that already have a stable reference. These aren't necessarily related to block, it's just how io_uring pins fixed buffers" * tag 'io_uring-20190323' of git://git.kernel.dk/linux-block: block: add BIO_NO_PAGE_REF flag iov_iter: add ITER_BVEC_FLAG_NO_REF flag io_uring: mark me as the maintainer io_uring: retry bulk slab allocs as single allocs io_uring: fix poll races io_uring: fix fget/fput handling io_uring: add prepped flag io_uring: make io_read/write return an integer io_uring: use regular request ref counts
2019-03-23Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes/changes that should go into this series. This contains: - Kernel doc / comment updates (Bart, Shenghui) - Un-export of core-only used function (Bart) - Fix race on loop file access (Dongli) - pf/pcd queue cleanup fixes (me) - Use appropriate helper for RESTART bit set (Yufen) - Use named identifier for classic poll (Yufen)" * tag 'for-linus-20190323' of git://git.kernel.dk/linux-block: sbitmap: trivial - update comment for sbitmap_deferred_clear_bit blkcg: Fix kernel-doc warnings blk-iolatency: #include "blk.h" block: Unexport blk_mq_add_to_requeue_list() block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx loop: access lo_backing_file only when the loop device is Lo_bound blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART paride/pcd: cleanup queues when detection fails paride/pf: cleanup queues when detection fails
2019-03-23Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A follow up for the new alloc_size logic and a blacklisting fix, marked for stable" * tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client: rbd: drop wait_for_latest_osdmap() libceph: wait for latest osdmap in ceph_monc_blacklist_add() rbd: set io_min, io_opt and discard_granularity to alloc_size
2019-03-23ext4: prohibit fstrim in norecovery modeDarrick J. Wong
The ext4 fstrim implementation uses the block bitmaps to find free space that can be discarded. If we haven't replayed the journal, the bitmaps will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-23pNFS/flexfiles: Fix layoutstats handling during read failoversTrond Myklebust
During a read failover, we may end up changing the value of the pgio_mirror_idx, so make sure that we record the layout stats before that update. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-23NFS: Fix a typo in nfs_init_timeout_values()Trond Myklebust
Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda19a6 ("NFS: Allow the mount option retrans=0") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-23ext4: cleanup bh release code in ext4_ind_remove_space()zhangyi (F)
Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-23SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connectedTrond Myklebust
If the transport is still connected, then we do want to allow RPC_SOFTCONN tasks to retry. They should time out if and only if the connection is broken. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-23ext4: brelse all indirect buffer in ext4_ind_remove_space()zhangyi (F)
All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org
2019-03-23genirq: Mark expected switch case fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. With -Wimplicit-fallthrough added to CFLAGS: kernel/irq/manage.c: In function ‘irq_do_set_affinity’: kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=] cpumask_copy(desc->irq_common_data.affinity, mask); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/irq/manage.c:199:2: note: here case IRQ_SET_MASK_OK_NOCOPY: ^~~~ Annotate it. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor
2019-03-23clocksource/drivers/riscv: Fix clocksource maskAtish Patra
For all riscv architectures (RV32, RV64 and RV128), the clocksource is a 64 bit incrementing counter. Fix the clock source mask accordingly. Tested on both 64bit and 32 bit virt machine in QEMU. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anup Patel <anup@brainfault.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-riscv@lists.infradead.org Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com
2019-03-23x86/gart: Exclude GART aperture from kcoreKairui Song
On machines where the GART aperture is mapped over physical RAM, /proc/kcore contains the GART aperture range. Accessing the GART range via /proc/kcore results in a kernel crash. vmcore used to have the same issue, until it was fixed with commit 2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging existing hook infrastructure in vmcore to let /proc/vmcore return zeroes when attempting to read the aperture region, and so it won't read from the actual memory. Apply the same workaround for kcore. First implement the same hook infrastructure for kcore, then reuse the hook functions introduced in the previous vmcore fix. Just with some minor adjustment, rename some functions for more general usage, and simplify the hook infrastructure a bit as there is no module usage yet. Suggested-by: Baoquan He <bhe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Dave Young <dyoung@redhat.com> Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
2019-03-23Merge tag 'gpio-5.1-rc2-fixes-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes GPIO fixes for v5.1-rc2 - check the return value of a function that can fail in gpio-exar - fix the SPDX identifier in amd-fch - fix the direction_input callback in gpio-adnp
2019-03-22cifs: update internal module version numberSteve French
To 2.19 Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22SMB3: Fix SMB3.1.1 guest mounts to SambaSteve French
Workaround problem with Samba responses to SMB3.1.1 null user (guest) mounts. The server doesn't set the expected flag in the session setup response so we have to do a similar check to what is done in smb3_validate_negotiate where we also check if the user is a null user (but not sec=krb5 since username might not be passed in on mount for Kerberos case). Note that the commit below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for cases where there is no user (even if server forgets to set the flag in the response) since we don't have anything useful to sign with. This is especially important now that the more secure SMB3.1.1 protocol is in the default dialect list. An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed the guest mounts to Windows. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22cifs: Fix slab-out-of-bounds when tracing SMB tconPaulo Alcantara (SUSE)
This patch fixes the following KASAN report: [ 779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180 [ 779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812 [ 779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62 [ 779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014 [ 779.044761] Call Trace: [ 779.044769] dump_stack+0x5b/0x90 [ 779.044775] ? string+0xab/0x180 [ 779.044781] print_address_description+0x6c/0x23c [ 779.044787] ? string+0xab/0x180 [ 779.044792] ? string+0xab/0x180 [ 779.044797] kasan_report.cold.3+0x1a/0x32 [ 779.044803] ? string+0xab/0x180 [ 779.044809] string+0xab/0x180 [ 779.044816] ? widen_string+0x160/0x160 [ 779.044822] ? vsnprintf+0x5bf/0x7f0 [ 779.044829] vsnprintf+0x4e7/0x7f0 [ 779.044836] ? pointer+0x4a0/0x4a0 [ 779.044841] ? seq_buf_vprintf+0x79/0xc0 [ 779.044848] seq_buf_vprintf+0x62/0xc0 [ 779.044855] trace_seq_printf+0x113/0x210 [ 779.044861] ? trace_seq_puts+0x110/0x110 [ 779.044867] ? trace_raw_output_prep+0xd8/0x110 [ 779.044876] trace_raw_output_smb3_tcon_class+0x9f/0xc0 [ 779.044882] print_trace_line+0x377/0x890 [ 779.044888] ? tracing_buffers_read+0x300/0x300 [ 779.044893] ? ring_buffer_read+0x58/0x70 [ 779.044899] s_show+0x6e/0x140 [ 779.044906] seq_read+0x505/0x6a0 [ 779.044913] vfs_read+0xaf/0x1b0 [ 779.044919] ksys_read+0xa1/0x130 [ 779.044925] ? kernel_write+0xa0/0xa0 [ 779.044931] ? __do_page_fault+0x3d5/0x620 [ 779.044938] do_syscall_64+0x63/0x150 [ 779.044944] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.044949] RIP: 0033:0x7f62c2c2db31 [ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02 02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89 [ 779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003 [ 779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003 [ 779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710 [ 779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000 [ 779.044981] Allocated by task 1257: [ 779.044987] __kasan_kmalloc.constprop.5+0xc1/0xd0 [ 779.044992] kmem_cache_alloc+0xad/0x1a0 [ 779.044997] getname_flags+0x6c/0x2a0 [ 779.045003] user_path_at_empty+0x1d/0x40 [ 779.045008] do_faccessat+0x12a/0x330 [ 779.045012] do_syscall_64+0x63/0x150 [ 779.045017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.045019] Freed by task 1257: [ 779.045023] __kasan_slab_free+0x12e/0x180 [ 779.045029] kmem_cache_free+0x85/0x1b0 [ 779.045034] filename_lookup.part.70+0x176/0x250 [ 779.045039] do_faccessat+0x12a/0x330 [ 779.045043] do_syscall_64+0x63/0x150 [ 779.045048] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 779.045052] The buggy address belongs to the object at ffff88814f326600 which belongs to the cache names_cache of size 4096 [ 779.045057] The buggy address is located 872 bytes to the right of 4096-byte region [ffff88814f326600, ffff88814f327600) [ 779.045058] The buggy address belongs to the page: [ 779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0 [ 779.045067] flags: 0x200000000010200(slab|head) [ 779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40 [ 779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 779.045083] page dumped because: kasan: bad access detected [ 779.045085] Memory state around the buggy address: [ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045099] ^ [ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 779.045109] ================================================================== [ 779.045110] Disabling lock debugging due to kernel taint Correctly assign tree name str for smb3_tcon event. Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22cifs: allow guest mounts to work for smb3.11Ronnie Sahlberg
Fix Guest/Anonymous sessions so that they work with SMB 3.11. The commit noted below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for Guest/Anonumous sessions. Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22fix incorrect error code mapping for OBJECTID_NOT_FOUNDSteve French
It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one). As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA. Signed-off-by: Steve French <stfrench@microsoft.com> CC: Amir Goldstein <amir73il@gmail.com>
2019-03-22cifs: fix that return -EINVAL when do dedupe operationXiaoli Feng
dedupe_file_range operations is combiled into remap_file_range. But it's always skipped for dedupe operations in function cifs_remap_file_range. Example to test: Before this patch: # dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Invalid argument After this patch: # dd if=/dev/zero of=cifs/file bs=1M count=1 # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file XFS_IOC_FILE_EXTENT_SAME: Operation not supported Influence for xfstests: generic/091 generic/112 generic/127 generic/263 These tests report this error "do_copy_range:: Invalid argument" instead of "FIDEDUPERANGE: Invalid argument". Because there are still two bugs cause these test failed. https://bugzilla.kernel.org/show_bug.cgi?id=202935 https://bugzilla.kernel.org/show_bug.cgi?id=202785 Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-22CIFS: Fix an issue with re-sending rdata when transport returning -EAGAINLong Li
When sending a rdata, transport may return -EAGAIN. In this case we should re-obtain credits because the session may have been reconnected. Change in v2: adjust_credits before re-sending Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-22CIFS: Fix an issue with re-sending wdata when transport returning -EAGAINLong Li
When sending a wdata, transport may return -EAGAIN. In this case we should re-obtain credits because the session may have been reconnected. Change in v2: adjust_credits before re-sending Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-22clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction staticYueHaibing
Fix sparse warning: drivers/clocksource/mips-gic-timer.c:70:18: warning: symbol 'gic_compare_irqaction' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() staticYueHaibing
Fix sparse warning: drivers/clocksource/timer-ti-dm.c:589:5: warning: symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() staticYueHaibing
Fix sparse warnings: drivers/clocksource/tcb_clksrc.c:74:6: warning: symbol 'tc_clksrc_suspend' was not declared. Should it be static? drivers/clocksource/tcb_clksrc.c:89:6: warning: symbol 'tc_clksrc_resume' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <nicolas.ferre@microchip.com> Cc: <daniel.lezcano@linaro.org> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/clps711x: Make clps711x_clksrc_init() staticYueHaibing
Fix sparse warning: drivers/clocksource/clps711x-timer.c:96:13: warning: symbol 'clps711x_clksrc_init' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Cc: <shc_work@mail.ru> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com
2019-03-22Merge tag 'perf-core-for-mingo-5.1-20190321' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo: BPF: Song Liu: - Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT and PERF_RECORD_KSYMBOL recently added to the kernel and plugging binutils's libopcodes disassembly of BPF programs with the existing annotation interfaces in 'perf annotate', 'perf report' and 'perf top' various output formats (--stdio, --stdio2, --tui). perf list: Andi Kleen: - Filter metrics when using substring search. perf record: Andi Kleen: - Allow to limit number of reported perf.data files - Clarify help for --switch-output. perf report: Andi Kleen - Indicate JITed code better. - Show all sort keys in help output. perf script: Andi Kleen: - Support relative time. perf stat: Andi Kleen: - Improve scaling. General: Changbin Du: - Fix some mostly error path memory and reference count leaks found using gcc's ASan and UBSan. Vendor events: Mamatha Inamdar: - Remove P8 HW events which are not supported. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-03-22Merge tag 'perf-core-for-mingo-5.1-20190311' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo: kernel: Stephane Eranian : - Restore mmap record type correctly when handling PERF_RECORD_MMAP2 events, as the same template is used for all the threads interested in mmap events, some may want just PERF_RECORD_MMAP, while some may want the extra info in MMAP2 records. perf probe: Adrian Hunter: - Fix getting the kernel map, because since changes related to x86 PTI entry trampolines handling, there are more than one kernel map. perf script: Andi Kleen: - Support insn output for normal samples, i.e.: perf script -F ip,sym,insn --xed Will fetch the sample IP from the thread address space and feed it to Intel's XED disassembler, producing lines such as: ffffffffa4068804 native_write_msr wrmsr ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx That match 'perf annotate's output. - Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in addition to PERF_RECORD_SAMPLE. perf report: - Add a new --samples option to save a small random number of samples per hist entry, using a reservoir technique to select a representative number of samples. Then allow browsing the samples using 'perf script' as part of the hist entry context menu. This automatically adds the right filters, so only the thread or CPU of the sample is displayed. Then we use less' search functionality to directly jump to the time stamp of the selected sample. It uses different menus for assembler and source display. Assembler needs xed installed and source needs debuginfo. - Fix the UI browser scripts pop up menu when there are many scripts available. perf report: Andi Kleen: - Add 'time' sort option. E.g.: % perf report --sort time,overhead,symbol --time-quantum 1ms --stdio ... 0.67% 277061.87300 [.] _dl_start 0.50% 277061.87300 [.] f1 0.50% 277061.87300 [.] f2 0.33% 277061.87300 [.] main 0.29% 277061.87300 [.] _dl_lookup_symbol_x 0.29% 277061.87300 [.] dl_main 0.29% 277061.87300 [.] do_lookup_x 0.17% 277061.87300 [.] _dl_debug_initialize 0.17% 277061.87300 [.] _dl_init_paths 0.08% 277061.87300 [.] check_match 0.04% 277061.87300 [.] _dl_count_modids 1.33% 277061.87400 [.] f1 1.33% 277061.87400 [.] f2 1.33% 277061.87400 [.] main 1.17% 277061.87500 [.] main 1.08% 277061.87500 [.] f1 1.08% 277061.87500 [.] f2 1.00% 277061.87600 [.] main 0.83% 277061.87600 [.] f1 0.83% 277061.87600 [.] f2 1.00% 277061.87700 [.] main tools headers: Arnaldo Carvalho de Melo: - Update x86's syscall_64.tbl, no change in tools/perf behaviour. - Sync copies asm-generic/unistd.h and linux/in with the kernel sources. perf data: Jiri Olsa: - Prep work to support having perf.data stored as a directory, with one file per CPU, that ultimately will allow having one ring buffer reading thread per CPU. Vendor events: Martin Liška: - perf PMU events for AMD Family 17h. perf script python: Tony Jones: - Add python3 support for the remaining Intel PT related scripts, with these we should have a clean build of perf with python3 while still supporting the build with python2. libbpf: Arnaldo Carvalho de Melo: - Fix the build on uCLibc, adding the missing stdarg.h since we use va_list in one typedef. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-22Merge tag 'powerpc-5.1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a boot failure on 32-bit, introduced during the merge window. A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC to jump forward and backward. Our spectre_v2 reporting was a bit confusing due to a bug I introduced. On some systems it was reporting that the count cache was disabled and also that we were flushing the count cache on context switch. Only the former is true, and given that the count cache is disabled it doesn't make any sense to flush it. No one reported it, so presumably the presence of any mitigation is all people check for. Finally a small build fix for zsmalloc on 32-bit. Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter Roeck, Michael Neuling" * tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/security: Fix spectre_v2 reporting powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32 powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038
2019-03-22Merge tag 'iommu-fixes-v5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE - Fix for IOVA code to trigger the slow-path less often - Two fixes for Intel VT-d to avoid writing to read-only registers and to flush the right domain id for the default domains in scalable mode * tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Save the right domain ID used by hardware iommu/vt-d: Check capability before disabling protected memory iommu/iova: Fix tracking of recently failed iova address iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE
2019-03-22Merge tag 'sound-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only significant change is the regression fixes for the jack detection at resume on HD-audio, while others are all small or trivial fixes like the coverage of missing error code or usual HD-audio quirk" * tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286 ALSA: hda - Enforces runtime_resume after S3 and S4 for each codec ALSA: hda - Don't trigger jackpoll_work in azx_resume ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklist ALSA: firewire-motu: use 'version' field of unit directory to identify model ALSA: sb8: add a check for request_region ALSA: echoaudio: add a check for ioremap_nocache
2019-03-22ALSA: hda/ca0132 - Simplify alt firmware loading codeTakashi Iwai
ca0132 codec driver loads the firmware selectively depending on the model in addition to the fallback of the default firmware. The code works good, but a minor problem is that the current code seems confusing for Clang where it spews a warning about uninitialized variable. This patch simplifies the code flow for such a false-positive warning. After this refactoring, the ca0132_spec.alt_firmware_present field is no longer used, hence it's eliminated as well. Reported-and-tested-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-22Merge tag 'devprop-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Add missing 'static' in two places (YueHaibing)" * tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: Make two functions static
2019-03-22Merge tag 'acpi-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent device references acquired by bus_find_device() in acpi_dev_present() from being leaked (Andy Shevchenko)" * tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / utils: Drop reference in test for device presence
2019-03-22Merge tag 'pm-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These rearrange some code in the generic power domains (genpd) framework to avoid a potential deadlock and make the turbostat utility behave more as expected. Specifics: - Rearrange the generic power domains (genpd) code to avoid a potential deadlock possible due to its interactions with the clock framework (Jiada Wang) - Make turbostat return the exit status of the command run under it if that command fails (David Arcari)" * tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Avoid a potential deadlock tools/power turbostat: return the exit status of a command
2019-03-22Merge tag 'mmc-v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v5.1: - alcor: Fix DMA reads - renesas_sdhi: Limit block count to 16-bit for old revisions - sdhci-omap: Fixup support for read-only pins - mxcmmc: Revert support for highmem pages - davinci/pxamci: Fix clang build warnings" * tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: limit block count to 16 bit for old revisions mmc: alcor: fix DMA reads mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages" mmc: davinci: remove extraneous __init annotation mmc: pxamci: fix enum type confusion
2019-03-22sbitmap: trivial - update comment for sbitmap_deferred_clear_bitShenghui Wang
"sbitmap_batch_clear" should be "sbitmap_deferred_clear" Acked-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-22xhci: Don't let USB3 ports stuck in polling state prevent suspendMathias Nyman
Commit 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") was intended to prevent ports that were still link training from being forced to U3 suspend state mid enumeration. This solved enumeration issues for devices with slow link training. Turns out some devices are stuck in the link training/polling state, and thus that patch will prevent suspend completely for these devices. This is seen with USB3 card readers in some MacBooks. Instead of preventing suspend, give some time to complete the link training. On successful training the port will end up as connected and enabled. If port instead is stuck in link training the bus suspend will continue suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout). Original patch was sent to stable, this one should go there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22usb: xhci: dbc: Don't free all memory with spinlock heldMathias Nyman
The xhci debug capability (DbC) feature did its memory cleanup with spinlock held. dma_free_coherent() warns if called with interrupts disabled move the memory cleanup outside the spinlock Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22xhci: Fix port resume done detection for SS ports with LPM enabledMathias Nyman
A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22Merge branch 'x86/cpu' into x86/urgentThomas Gleixner
Merge the forgotten cleanup patch for the new file, so the mess does not propagate further.
2019-03-22x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return ↵Nathan Chancellor
an error When building with -Wsometimes-uninitialized, Clang warns: arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/392 Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
2019-03-22gpio: amd-fch: Fix bogus SPDX identifierThomas Gleixner
spdxcheck.py complains: include/linux/platform_data/gpio/gpio-amd-fch.h: 1:28 Invalid License ID: GPL+ which is correct because GPL+ is not a valid identifier. Of course this could have been caught by checkpatch.pl _before_ submitting or merging the patch. WARNING: 'SPDX-License-Identifier: GPL+ */' is not supported in LICENSES/... #271: FILE: include/linux/platform_data/gpio/gpio-amd-fch.h:1: +/* SPDX-License-Identifier: GPL+ */ Fix it under the assumption that the author meant GPL-2.0+, which makes sense as the corresponding C file is using that identifier. Fixes: e09d168f13f0 ("gpio: AMD G-Series PCH gpio driver") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-22gpio: adnp: Fix testing wrong value in adnp_gpio_direction_inputAxel Lin
Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a401a01 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-22gpio: exar: add a check for the return value of ida_simple_get failsKangjie Lu
ida_simple_get may fail and return a negative error number. The fix checks its return value; if it fails, go to err_destroy. Cc: <stable@vger.kernel.org> Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-22ALSA: pcm: Fix possible OOB access in PCM oss pluginsTakashi Iwai
The PCM OSS emulation converts and transfers the data on the fly via "plugins". The data is converted over the dynamically allocated buffer for each plugin, and recently syzkaller caught OOB in this flow. Although the bisection by syzbot pointed out to the commit 65766ee0bf7f ("ALSA: oss: Use kvzalloc() for local buffer allocations"), this is merely a commit to replace vmalloc() with kvmalloc(), hence it can't be the cause. The further debug action revealed that this happens in the case where a slave PCM doesn't support only the stereo channels while the OSS stream is set up for a mono channel. Below is a brief explanation: At each OSS parameter change, the driver sets up the PCM hw_params again in snd_pcm_oss_change_params_lock(). This is also the place where plugins are created and local buffers are allocated. The problem is that the plugins are created before the final hw_params is determined. Namely, two snd_pcm_hw_param_near() calls for setting the period size and periods may influence on the final result of channels, rates, etc, too, while the current code has already created plugins beforehand with the premature values. So, the plugin believes that channels=1, while the actual I/O is with channels=2, which makes the driver reading/writing over the allocated buffer size. The fix is simply to move the plugin allocation code after the final hw_params call. Reported-by: syzbot+d4503ae45b65c5bc1194@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:45:12 +0000