| Age | Commit message (Collapse) | Author |
|---|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a synthetic feature flag for Zen6.
[ bp: Move the feature flag to a free slot and avoid future merge
conflicts from incoming stuff. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
|
|
The xe buffer object shrinker name is visible in the
<debugfs>/shrinker directory and most if not all other shinkers
follow a naming convention that looks like
<subsystem>-<driver>_<objects>:<unique>
Follow the same convention for xe, changing the name to
drm-xe_gem:<unique>.
Other shrinkers typically use the device node for <unique> but
since drm drivers typically don't have a single unique device-
node, instead use the unique name in the drm device.
Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250508112931.3347-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 243bf99e2fe75edf8df1711c1377b6fc020b806c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: Fix RCU warning message in list traversal
fprobe_module_callback() using hlist_for_each_entry_rcu() traverse
the fprobe list but it locks fprobe_mutex() instead of rcu lock
because it is enough. So add lockdep_is_held() to avoid warning.
- tracing: eprobe: Add missing trace_probe_log_clear for eprobe
__trace_eprobe_create() uses trace_probe_log but forgot to clear it
at exit. Add trace_probe_log_clear() calls.
- tracing: probes: Fix possible race in trace_probe_log APIs
trace_probe_log APIs are used in probe event (dynamic_events,
kprobe_events and uprobe_events) creation. Only dynamic_events uses
the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and
uprobe events to lock the same mutex to serialize its creation to
avoid race in trace_probe_log APIs.
* tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix a possible race in trace_probe_log APIs
tracing: add missing trace_probe_log_clear for eprobes
tracing: fprobe: Fix RCU warning message in list traversal
|
|
It's expected that we'll encounter temporary exceptions
during aux transactions. Adjust logging from drm_info to
drm_dbg_dp to prevent flooding with unnecessary log messages.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250513032026.838036-1-Wayne.Lin@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9a9c3e1fe5256da14a0a307dff0478f90c55fc8c)
Cc: stable@vger.kernel.org
|
|
Similar to commit 6a057072ddd1 ("drm/amd/display: Fix null check for
pipe_ctx->plane_state in dcn20_program_pipe") that addresses a null
pointer dereference on dcn20_update_dchubp_dpp. This is the same
function hooked for update_dchubp_dpp in dcn401, with the same issue.
Fix possible null pointer deference on dcn401_program_pipe too.
Fixes: 63ab80d9ac0a ("drm/amd/display: DML2.1 Post-Si Cleanup")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8d47f739752227957d8efc0cb894761bfe1d879)
|
|
[Why & How]
Fix a false positive warning which occurs due to lack of correct checks
when querying plane_id in DML21. This fixes the warning when performing a
mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover):
[ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi
[ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu
[ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024
[ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu]
[ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87
[ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246
[ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000
[ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000
[ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000
[ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000
[ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000
[ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000
[ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0
[ 35.751806] PKRU: 55555554
[ 35.751807] Call Trace:
[ 35.751810] <TASK>
[ 35.751816] ? show_regs+0x6c/0x80
[ 35.751820] ? __warn+0x88/0x140
[ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.751964] ? report_bug+0x182/0x1b0
[ 35.751969] ? handle_bug+0x6e/0xb0
[ 35.751972] ? exc_invalid_op+0x18/0x80
[ 35.751974] ? asm_exc_invalid_op+0x1b/0x20
[ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu]
[ 35.752117] ? math_pow+0x48/0xa0 [amdgpu]
[ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752260] ? math_pow+0x48/0xa0 [amdgpu]
[ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752403] ? math_pow+0x11/0xa0 [amdgpu]
[ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu]
[ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5
[ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu]
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)
|
|
[Why & How]
When MST config is unplugged/replugged too quickly, it can potentially
result in a scenario where previous DC state has not been reset before
the HPD link detection sequence begins. In this case, driver will
disable the streams/link prior to re-enabling the link for link
training.
There is a bug in the current logic that does not account for the fact
that current_state can be released and cleared prior to swapping to a
new state (resulting in the pipe_ctx stream pointers to be cleared) in
between disabling streams.
To resolve this, cache the original streams prior to committing any
stream updates.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1561782686ccc36af844d55d31b44c938dd412dc)
|
|
[Why & How]
Instead of dropping DRR updates, defer them. This fixes issues where
monitor continues to see incorrect refresh rate after VRR was turned off
by userspace.
Fixes: 32953485c558 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: John Olender <john.olender@gmail.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53761b7ecd83e6fbb9f2206f8c980a6aa308c844)
Cc: stable@vger.kernel.org
|
|
This reverts commit 756c85e4d0dd ("drm/amd/display: Enable urgent latency adjustment on DCN35")
Reason for revert: Negative power impact.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9334c491cd8f388232b9a187bf0ddb728482bd6f)
|
|
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb00 ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ac37f0dcd2e0b729fa7b5513908dc8ab802b540)
Cc: stable@vger.kernel.org
|
|
On GFX1151, the reported MALL cache size reflects only
half of its actual size; this adjustment corrects the discrepancy.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a5c060b593ad152318f89e5564bfdfcff8a6ac0)
Cc: stable@vger.kernel.org
|
|
After process exit to unmap csa and free GPU vm, if signal is accepted
and then waiting to take vm lock is interrupted and return, it causes
memory leaking and below warning backtrace.
Change to use uninterruptible wait lock fix the issue.
WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525
amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu]
Call Trace:
<TASK>
drm_file_free.part.0+0x1da/0x230 [drm]
drm_close_helper.isra.0+0x65/0x70 [drm]
drm_release+0x6a/0x120 [drm]
amdgpu_drm_release+0x51/0x60 [amdgpu]
__fput+0x9f/0x280
____fput+0xe/0x20
task_work_run+0x67/0xa0
do_exit+0x217/0x3c0
do_group_exit+0x3b/0xb0
get_signal+0x14a/0x8d0
arch_do_signal_or_restart+0xde/0x100
exit_to_user_mode_loop+0xc1/0x1a0
exit_to_user_mode_prepare+0xf4/0x100
syscall_exit_to_user_mode+0x17/0x40
do_syscall_64+0x69/0xc0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab)
Cc: stable@vger.kernel.org
|
|
When shared pages are being converted to private during kdump, additional
checks are performed. They include handling the case of a GHCB page being
contained within a huge page.
Currently, this check incorrectly skips a page just below the GHCB page from
being transitioned back to private during kdump preparation.
This skipped page causes a 0x404 #VC exception when it is accessed later while
dumping guest memory for vmcore generation.
Correct the range to be checked for GHCB contained in a huge page. Also,
ensure that the skipped huge page containing the GHCB page is transitioned
back to private by applying the correct address mask later when changing GHCBs
to private at end of kdump preparation.
[ bp: Massage commit message. ]
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250506183529.289549-1-Ashish.Kalra@amd.com
|
|
When kdump is running makedumpfile to generate vmcore and dump SNP guest
memory it touches the VMSA page of the vCPU executing kdump.
It then results in unrecoverable #NPF/RMP faults as the VMSA page is
marked busy/in-use when the vCPU is running and subsequently a causes
guest softlockup/hang.
Additionally, other APs may be halted in guest mode and their VMSA pages
are marked busy and touching these VMSA pages during guest memory dump
will also cause #NPF.
Issue AP_DESTROY GHCB calls on other APs to ensure they are kicked out
of guest mode and then clear the VMSA bit on their VMSA pages.
If the vCPU running kdump is an AP, mark it's VMSA page as offline to
ensure that makedumpfile excludes that page while dumping guest memory.
Fixes: 3074152e56c9 ("x86/sev: Convert shared memory back to private on kexec")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250428214151.155464-1-Ashish.Kalra@amd.com
|
|
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report")
Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.local/
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Tested-by: Petr Tesarik <petr@tesarici.cz>
Link: https://patch.msgid.link/20250512152420.87441-1-i@rong.moe
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When bridged ports and standalone ports share a VLAN, e.g. via VLAN
uppers, or untagged traffic with a vlan unaware bridge, the ASIC will
still try to forward traffic to known FDB entries on standalone ports.
But since the port VLAN masks prevent forwarding to bridged ports, this
traffic will be dropped.
This e.g. can be observed in the bridge_vlan_unaware ping tests, where
this breaks pinging with learning on.
Work around this by enabling the simplified EAP mode on switches
supporting it for standalone ports, which causes the ASIC to redirect
traffic of unknown source MAC addresses to the CPU port.
Since standalone ports do not learn, there are no known source MAC
addresses, so effectively this redirects all incoming traffic to the CPU
port.
Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
If the caller wrote more characters, count is truncated to the max
available space in "simple_write_to_buffer". Check that the input
size does not exceed the buffer size. Write a zero termination
afterwards.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505091754.285hHbr2-lkp@intel.com/
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250509150459.115489-1-markus.burri@mt.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If CONFIG_SH_DMA_API=n:
WARNING: unmet direct dependencies detected for G2_DMA
Depends on [n]: SH_DREAMCAST [=y] && SH_DMA_API [=n]
Selected by [y]:
- SND_AICA [=y] && SOUND [=y] && SND [=y] && SND_SUPERH [=y] && SH_DREAMCAST [=y]
SND_AICA selects G2_DMA. As the latter depends on SH_DMA_API, the
former should depend on SH_DMA_API, too.
Fixes: f477a538c14d07f8 ("sh: dma: fix kconfig dependency for G2_DMA")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505131320.PzgTtl9H-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/b90625f8a9078d0d304bafe862cbe3a3fab40082.1747121335.git.geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A user reported on the Arch Linux Forums that their device is emitting
the following message in the kernel journal, which is fixed by adding
the quirk as submitted in this patch:
> kernel: usb 1-2: current rate 8436480 is different from the runtime rate 48000
There also is an entry for this product line added long time ago.
Their specific device has the following ID:
$ lsusb | grep Audio
Bus 001 Device 002: ID 1101:0003 EasyPass Industrial Co., Ltd Audioengine D1
Link: https://bbs.archlinux.org/viewtopic.php?id=305494
Fixes: 93f9d1a4ac593 ("ALSA: usb-audio: Apply sample rate quirk for Audioengine D1")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20250512-audioengine-quirk-addition-v1-1-4c370af6eff7@heusel.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Oleksij Rempel says:
====================
address EEE regressions on KSZ switches since v6.9 (v6.14+)
This patch series addresses a regression in Energy Efficient Ethernet
(EEE) handling for KSZ switches with integrated PHYs, introduced in
kernel v6.9 by commit fe0d4fd9285e ("net: phy: Keep track of EEE
configuration").
The first patch updates the DSA driver to allow phylink to properly
manage PHY EEE configuration. Since integrated PHYs handle LPI
internally and ports without integrated PHYs do not document MAC-level
LPI support, dummy MAC LPI callbacks are provided.
The second patch removes outdated EEE workarounds from the micrel PHY
driver, as they are no longer needed with correct phylink handling.
This series addresses the regression for mainline and kernels starting
from v6.14. It is not easily possible to fully fix older kernels due
to missing infrastructure changes.
Tested on KSZ9893 hardware.
====================
Link: https://patch.msgid.link/20250504081434.424489-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9477 PHY driver contained workarounds for broken EEE capability
advertisements by manually masking supported EEE modes and forcibly
disabling EEE if MICREL_NO_EEE was set.
With proper MAC-side EEE handling implemented via phylink, these quirks
are no longer necessary. Remove MICREL_NO_EEE handling and the use of
ksz9477_get_features().
This simplifies the PHY driver and avoids duplicated EEE management logic.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # v6.14+
Link: https://patch.msgid.link/20250504081434.424489-3-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Phylink expects MAC drivers to provide LPI callbacks to properly manage
Energy Efficient Ethernet (EEE) configuration. On KSZ switches with
integrated PHYs, LPI is internally handled by hardware, while ports
without integrated PHYs have no documented MAC-level LPI support.
Provide dummy mac_disable_tx_lpi() and mac_enable_tx_lpi() callbacks to
satisfy phylink requirements. Also, set default EEE capabilities during
phylink initialization where applicable.
Since phylink can now gracefully handle optional EEE configuration,
remove the need for the MICREL_NO_EEE PHY flag.
This change addresses issues caused by incomplete EEE refactoring
introduced in commit fe0d4fd9285e ("net: phy: Keep track of EEE
configuration"). It is not easily possible to fix all older kernels, but
this patch ensures proper behavior on latest kernels and can be
considered for backporting to stable kernels starting from v6.14.
Fixes: fe0d4fd9285e ("net: phy: Keep track of EEE configuration")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # v6.14+
Link: https://patch.msgid.link/20250504081434.424489-2-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The flag NVMET_PCI_EPF_Q_IS_SQ is set but never used. Remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Improve the debug message of nvmet_pci_epf_create_cq() to indicate if a
completion queue IRQ is disabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is no point in taking the controller irq_lock and calling
nvmet_pci_epf_should_raise_irq() for a completion queue which does not
have IRQ enabled (NVMET_PCI_EPF_Q_IRQ_ENABLED flag is not set).
Move the test for the NVMET_PCI_EPF_Q_IRQ_ENABLED flag out of
nvmet_pci_epf_should_raise_irq() to the top of nvmet_pci_epf_raise_irq()
to return early when no IRQ should be raised.
Also, use dev_err_ratelimited() to avoid a message storm under load when
raising IRQs is failing.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some endpoint PCIe controllers do not support raising legacy INTX
interrupts. This support is indicated by the intx_capable field of
struct pci_epc_features. Modify nvmet_pci_epf_raise_irq() to not
automatically fallback to trying raising an INTX interrupt after an MSI
or MSI-X error if the controller does not support INTX.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvmet_pci_epf_delete_cq() unconditionally calls
nvmet_pci_epf_remove_irq_vector() even for completion queues that do not
have interrupts enabled. Furthermore, for completion queues that do
have IRQ enabled, deleting and re-creating the completion queue leaves
the flag NVMET_PCI_EPF_Q_IRQ_ENABLED set, even if the completion queue
is being re-created with IRQ disabled.
Fix these issues by calling nvmet_pci_epf_remove_irq_vector() only if
NVMET_PCI_EPF_Q_IRQ_ENABLED is set and make sure to always clear that
flag.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to lock this queue for that condition because the timeout work
executes per-namespace and can poll the poll CQ.
Reported-by: Hannes Reinecke <hare@kernel.org>
Closes: https://lore.kernel.org/all/20240902130728.1999-1-hare@kernel.org/
Fixes: a0fa9647a54e ("NVMe: add blk polling support")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The only reason nvme_pci_npages_prp() could be used as a compile-time
known result in BUILD_BUG_ON() is because the compiler was always choosing
to inline the function. Under special circumstances (sanitizer coverage
functions disabled for __init functions on ARCH=um), the compiler decided
to stop inlining it:
drivers/nvme/host/pci.c: In function 'nvme_init':
include/linux/compiler_types.h:557:45: error: call to '__compiletime_assert_678' declared with attribute error: BUILD_BUG_ON failed: nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:538:25: note: in definition of macro '__compiletime_assert'
538 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:557:9: note: in expansion of macro '_compiletime_assert'
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG'
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
drivers/nvme/host/pci.c:3804:9: note: in expansion of macro 'BUILD_BUG_ON'
3804 | BUILD_BUG_ON(nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS);
| ^~~~~~~~~~~~
Force it to be __always_inline to make sure it is always available for
use with BUILD_BUG_ON().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061846.12FMyRjj-lkp@intel.com/
Fixes: c372cdd1efdf ("nvme-pci: iod npages fits in s8")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac616846 ("sd_zbc: Fix report zones buffer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Siwinski <ssiwinski@atto.com>
Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It has been reported that when under a bridge with stp_state=1, the logs
get spammed with this message:
[ 251.734607] fsl_dpaa2_eth dpni.5 eth0: Couldn't decode source port
Further debugging shows the following info associated with packets:
source_port=-1, switch_id=-1, vid=-1, vbid=1
In other words, they are data plane packets which are supposed to be
decoded by dsa_tag_8021q_find_port_by_vbid(), but the latter (correctly)
refuses to do so, because no switch port is currently in
BR_STATE_LEARNING or BR_STATE_FORWARDING - so the packet is effectively
unexpected.
The error goes away after the port progresses to BR_STATE_LEARNING in 15
seconds (the default forward_time of the bridge), because then,
dsa_tag_8021q_find_port_by_vbid() can correctly associate the data plane
packets with a plausible bridge port in a plausible STP state.
Re-reading IEEE 802.1D-1990, I see the following:
"4.4.2 Learning: (...) The Forwarding Process shall discard received
frames."
IEEE 802.1D-2004 further clarifies:
"DISABLED, BLOCKING, LISTENING, and BROKEN all correspond to the
DISCARDING port state. While those dot1dStpPortStates serve to
distinguish reasons for discarding frames, the operation of the
Forwarding and Learning processes is the same for all of them. (...)
LISTENING represents a port that the spanning tree algorithm has
selected to be part of the active topology (computing a Root Port or
Designated Port role) but is temporarily discarding frames to guard
against loops or incorrect learning."
Well, this is not what the driver does - instead it sets
mac[port].ingress = true.
To get rid of the log spam, prevent unexpected data plane packets to
be received by software by discarding them on ingress in the LISTENING
state.
In terms of blame attribution: the prints only date back to commit
d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based
on the VBID"). However, the settings would permit a LISTENING port to
forward to a FORWARDING port, and the standard suggests that's not OK.
Fixes: 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250509113816.2221992-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__netdev_update_features() expects the netdevice to be ops-locked, but
it gets called recursively on the lower level netdevices to sync their
features, and nothing locks those.
This commit fixes that, with the assumption that it shouldn't be possible
for both higher-level and lover-level netdevices to require the instance
lock, because that would lead to lock dependency warnings.
Without this, playing with higher level (e.g. vxlan) netdevices on top
of netdevices with instance locking enabled can run into issues:
WARNING: CPU: 59 PID: 206496 at ./include/net/netdev_lock.h:17 netif_napi_add_weight_locked+0x753/0xa60
[...]
Call Trace:
<TASK>
mlx5e_open_channel+0xc09/0x3740 [mlx5_core]
mlx5e_open_channels+0x1f0/0x770 [mlx5_core]
mlx5e_safe_switch_params+0x1b5/0x2e0 [mlx5_core]
set_feature_lro+0x1c2/0x330 [mlx5_core]
mlx5e_handle_feature+0xc8/0x140 [mlx5_core]
mlx5e_set_features+0x233/0x2e0 [mlx5_core]
__netdev_update_features+0x5be/0x1670
__netdev_update_features+0x71f/0x1670
dev_ethtool+0x21c5/0x4aa0
dev_ioctl+0x438/0xae0
sock_ioctl+0x2ba/0x690
__x64_sys_ioctl+0xa78/0x1700
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250509072850.2002821-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a situation where after THALT is set high, TGO stays high as
well. Because jiffies are never updated, as we are in a context with
interrupts disabled, we never exit that loop and have a deadlock.
That deadlock was noticed on a sama5d4 device that stayed locked for days.
Use retries instead of jiffies so that the timeout really works and we do
not have a deadlock anymore.
Fixes: e86cd53afc590 ("net/macb: better manage tx errors")
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509121935.16282-1-othacehe@gnu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"A little bit invasive for rc6 but they're important fixes, pass tests
fine and won't break anything outside sched_ext:
- scx_bpf_cpuperf_set() calls internal functions that require the rq
to be locked. It assumed that the BPF caller has rq locked but
that's not always true. Fix it by tracking whether rq is currently
held by the CPU and grabbing it if necessary
- bpf_iter_scx_dsq_new() was leaving the DSQ iterator in an
uninitialized state after an error. However, next() and destroy()
can be called on an iterator which failed initialization and thus
they always need to be initialized even after an init error. Fix by
always initializing the iterator
- Remove duplicate BTF_ID_FLAGS() entries"
* tag 'sched_ext-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
sched_ext: Fix rq lock state in hotplug ops
sched_ext: Remove duplicate BTF_ID_FLAGS definitions
sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()
sched_ext: Track currently locked rq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"One low-risk patch to fix a cpuset bug where it over-eagerly tries to
modify CPU affinity of kernel threads"
* tag 'cgroup-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Extend kthread_is_per_cpu() check to all PF_NO_SETAFFINITY tasks
|
|
The Btrfs documentation states that if the commit value is greater than
300 a warning should be issued. The warning was accidentally lost in the
new mount API update.
Fixes: 6941823cc878 ("btrfs: remove old mount API code")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If btrfs_reserve_extent() fails while submitting an async_extent for a
compressed write, then we fail to call free_async_extent_pages() on the
async_extent and leak its folios. A likely cause for such a failure
would be btrfs_reserve_extent() failing to find a large enough
contiguous free extent for the compressed extent.
I was able to reproduce this by:
1. mount with compress-force=zstd:3
2. fallocating most of a filesystem to a big file
3. fragmenting the remaining free space
4. trying to copy in a file which zstd would generate large compressed
extents for (vmlinux worked well for this)
Step 4. hits the memory leak and can be repeated ad nauseam to
eventually exhaust the system memory.
Fix this by detecting the case where we fallback to uncompressed
submission for a compressed async_extent and ensuring that we call
free_async_extent_pages().
Fixes: 131a821a243f ("btrfs: fallback if compressed IO fails for ENOSPC")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-developed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the discard worker is running and there's currently only one block
group, that block group is a data block group, it's in the unused block
groups discard list and is being used (it got an extent allocated from it
after becoming unused), the worker can end up in an infinite loop if a
transaction abort happens or the async discard is disabled (during remount
or unmount for example).
This happens like this:
1) Task A, the discard worker, is at peek_discard_list() and
find_next_block_group() returns block group X;
2) Block group X is in the unused block groups discard list (its discard
index is BTRFS_DISCARD_INDEX_UNUSED) since at some point in the past
it become an unused block group and was added to that list, but then
later it got an extent allocated from it, so its ->used counter is not
zero anymore;
3) The current transaction is aborted by task B and we end up at
__btrfs_handle_fs_error() in the transaction abort path, where we call
btrfs_discard_stop(), which clears BTRFS_FS_DISCARD_RUNNING from
fs_info, and then at __btrfs_handle_fs_error() we set the fs to RO mode
(setting SB_RDONLY in the super block's s_flags field);
4) Task A calls __add_to_discard_list() with the goal of moving the block
group from the unused block groups discard list into another discard
list, but at __add_to_discard_list() we end up doing nothing because
btrfs_run_discard_work() returns false, since the super block has
SB_RDONLY set in its flags and BTRFS_FS_DISCARD_RUNNING is not set
anymore in fs_info->flags. So block group X remains in the unused block
groups discard list;
5) Task A then does a goto into the 'again' label, calls
find_next_block_group() again we gets block group X again. Then it
repeats the previous steps over and over since there are not other
block groups in the discard lists and block group X is never moved
out of the unused block groups discard list since
btrfs_run_discard_work() keeps returning false and therefore
__add_to_discard_list() doesn't move block group X out of that discard
list.
When this happens we can get a soft lockup report like this:
[71.957] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:3:97]
[71.957] Modules linked in: xfs af_packet rfkill (...)
[71.957] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.957] Tainted: [W]=WARN
[71.957] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.957] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.957] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[71.957] Code: c1 01 48 83 (...)
[71.957] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[71.957] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[71.957] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[71.957] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[71.957] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[71.957] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[71.957] FS: 0000000000000000(0000) GS:ffff89707bc00000(0000) knlGS:0000000000000000
[71.957] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71.957] CR2: 00005605bcc8d2f0 CR3: 000000010376a001 CR4: 0000000000770ef0
[71.957] PKRU: 55555554
[71.957] Call Trace:
[71.957] <TASK>
[71.957] process_one_work+0x17e/0x330
[71.957] worker_thread+0x2ce/0x3f0
[71.957] ? __pfx_worker_thread+0x10/0x10
[71.957] kthread+0xef/0x220
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork+0x34/0x50
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork_asm+0x1a/0x30
[71.957] </TASK>
[71.957] Kernel panic - not syncing: softlockup: hung tasks
[71.987] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W L 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.989] Tainted: [W]=WARN, [L]=SOFTLOCKUP
[71.989] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.991] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.992] Call Trace:
[71.993] <IRQ>
[71.994] dump_stack_lvl+0x5a/0x80
[71.994] panic+0x10b/0x2da
[71.995] watchdog_timer_fn.cold+0x9a/0xa1
[71.996] ? __pfx_watchdog_timer_fn+0x10/0x10
[71.997] __hrtimer_run_queues+0x132/0x2a0
[71.997] hrtimer_interrupt+0xff/0x230
[71.998] __sysvec_apic_timer_interrupt+0x55/0x100
[71.999] sysvec_apic_timer_interrupt+0x6c/0x90
[72.000] </IRQ>
[72.000] <TASK>
[72.001] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[72.002] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[72.002] Code: c1 01 48 83 (...)
[72.005] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[72.006] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[72.006] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[72.007] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[72.008] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[72.009] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[72.010] ? btrfs_discard_workfn+0x51/0x400 [btrfs 23b01089228eb964071fb7ca156eee8cd3bf996f]
[72.011] process_one_work+0x17e/0x330
[72.012] worker_thread+0x2ce/0x3f0
[72.013] ? __pfx_worker_thread+0x10/0x10
[72.014] kthread+0xef/0x220
[72.014] ? __pfx_kthread+0x10/0x10
[72.015] ret_from_fork+0x34/0x50
[72.015] ? __pfx_kthread+0x10/0x10
[72.016] ret_from_fork_asm+0x1a/0x30
[72.017] </TASK>
[72.017] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[72.019] Rebooting in 90 seconds..
So fix this by making sure we move a block group out of the unused block
groups discard list when calling __add_to_discard_list().
Fixes: 2bee7eb8bb81 ("btrfs: discard one region at a time in async discard")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1242012
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Use spurious 8042 quirk with MECHREVO Wujie 14XA
- amd/pmf:
- Ensure Smart PC policies are valid
- Fix memory leak when the engine fails to start
- amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
- asus-wmi: Fix wlan_ctrl_by_user detection
- thinkpad_acpi: Add support for NEC Lavie X1475JAS
* tag 'platform-drivers-x86-v6.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix wlan_ctrl_by_user detection
platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL)
platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS
platform/x86/amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
drivers/platform/x86/amd: pmf: Check for invalid Smart PC Policies
drivers/platform/x86/amd: pmf: Check for invalid sideloaded Smart PC Policies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fix from Jan Kara:
"Fix a bug in UDF inode eviction leading to spewing pointless
error messages"
* tag 'udf_for_v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Make sure i_lenExtents is uptodate on inode eviction
|
|
When using trace_array_printk() on a created instance, the correct
function to use to initialize it is:
trace_array_init_printk()
Not
trace_printk_init_buffer()
The former is a proper function to use, the latter is for initializing
trace_printk() and causes the NOTICE banner to be displayed.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Divya Indi <divya.indi@oracle.com>
Link: https://lore.kernel.org/20250509152657.0f6744d9@gandalf.local.home
Fixes: 89ed42495ef4a ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Fixes: 38ce2a9e33db6 ("tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Ensure that simple_xattr_list() always includes security.* xattrs
- Fix eventpoll busy loop optimization when combined with timeouts
- Disable swapon() for devices with block sizes greater than page sizes
- Don't call errseq_set() twice during mark_buffer_write_io_error().
Just use mapping_set_error() which takes care to not deference
unconditionally
* tag 'vfs-6.15-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove redundant errseq_set call in mark_buffer_write_io_error.
swapfile: disable swapon for bs > ps devices
fs/eventpoll: fix endless busy loop after timeout has expired
fs/xattr.c: fix simple_xattr_list to always include security.* xattrs
|
|
This was forgotten when the analyzer went upstream.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250424212234.5313-2-wsa+renesas@sang-engineering.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For older/32-bit systems with highmem, don't assume that the pages in
a mapped region are always going to be mapped. If io_region_init_ptr()
finds that the pages are coalescable, also check if the first page is
a HighMem page or not. If it is, fall through to the usual vmap()
mapping rather than attempt to get the unmapped page address.
Cc: stable@vger.kernel.org
Fixes: c4d0ac1c1567 ("io_uring/memmap: optimise single folio regions")
Link: https://lore.kernel.org/all/681fe2fb.050a0220.f2294.001a.GAE@google.com/
Reported-by: syzbot+5b8c4abafcb1d791ccfc@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/681fed0a.050a0220.f2294.001c.GAE@google.com/
Reported-by: syzbot+6456a99dfdc2e78c4feb@syzkaller.appspotmail.com
Tested-by: syzbot+6456a99dfdc2e78c4feb@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify the check for whether the timer is initialized during IO transfer
when passthrough is used with hybrid polling, to ensure that it's always
setup correctly.
Cc: stable@vger.kernel.org
Fixes: 01ee194d1aba ("io_uring: add support for hybrid IOPOLL")
Signed-off-by: hexue <xue01.he@samsung.com>
Link: https://lore.kernel.org/r/20250512052025.293031-1-xue01.he@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
