summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-27Merge branch 'pm-devfreq'Rafael J. Wysocki
* pm-devfreq: (24 commits) PM / devfreq: Add debugfs support with devfreq_summary file PM / devfreq: exynos: Rename Exynos to lowercase PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event PM / devfreq: exynos-bus: Disable devfreq-event device when fails PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails PM / devfreq: imx8m-ddrc: Remove unused defines PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource PM / devfreq: rk3399_dmc: Add missing of_node_put() PM / devfreq: rockchip-dfi: Add missing of_node_put() PM / devfreq: Fix multiple kernel-doc warnings PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive() PM / devfreq: exynos-bus: Extract exynos_bus_profile_init() PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq) PM / devfreq: Move statistics to separate struct devfreq_stats PM / devfreq: Add clearing transitions stats PM / devfreq: Change time stats to 64-bit PM / devfreq: Add new name attribute for sysfs ...
2020-01-27Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc'Rafael J. Wysocki
* pm-core: PM-runtime: add tracepoints for usage_count changes * powercap: powercap/intel_rapl: add support for JasperLake x86/cpu: Add Jasper Lake to Intel family powercap/intel_rapl: add support for TigerLake Mobile * pm-opp: opp: Replace list_kref with a local counter opp: Free static OPPs on errors while adding them * pm-avs: power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static power: avs: qcom-cpr: remove set but unused variable power: avs: qcom-cpr: make sure that regmap is available power: avs: qcom-cpr: fix unsigned expression compared with zero power: avs: qcom-cpr: fix invalid printk specifier in debug print power: avs: Add support for CPR (Core Power Reduction) dt-bindings: power: avs: Add support for CPR (Core Power Reduction) * pm-misc: mailmap: Add entry for <rjw@sisk.pl>
2020-01-27Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki
* pm-cpufreq: cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" cpufreq: s3c: fix unbalances of cpufreq policy refcount cpufreq: imx-cpufreq-dt: Add i.MX8MP support cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading cpufreq: tegra186: convert to devm_platform_ioremap_resource cpufreq: kirkwood: convert to devm_platform_ioremap_resource cpufreq: CPPC: put ACPI table after using it cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched * pm-sleep: PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" PM: hibernate: Add more logging on hibernation failure PM: hibernate: improve arithmetic division in preallocate_highmem_fraction() PM: wakeup: Show statistics for deleted wakeup sources again PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()
2020-01-27Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: (27 commits) intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers cpuidle: Drop unused cpuidle_driver_ref/unref() functions intel_idle: Use ACPI _CST on server systems intel_idle: Add module parameter to prevent ACPI _CST from being used intel_idle: Allow ACPI _CST to be used for selected known processors cpuidle: Allow idle states to be disabled by default intel_idle: Use ACPI _CST for processor models without C-state tables intel_idle: Refactor intel_idle_cpuidle_driver_init() ...
2020-01-27Merge tag 'wireless-drivers-next-2020-01-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.6 Second set of patches for v5.6. Nothing special standing out, smaller new features and fixes allover. Major changes: ar5523 * add support for SMCWUSBT-G2 USB device iwlwifi * support new versions of the FTM FW APIs * support new version of the beacon template FW API * print some extra information when the driver is loaded rtw88 * support wowlan feature for 8822c * add support for WIPHY_WOWLAN_NET_DETECT brcmfmac * add initial support for monitor mode qtnfmac * add module parameter to enable DFS offloading in firmware * add support for STA HE rates * add support for TWT responder and spatial reuse ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'bpf-flow-dissector-fix-port-ranges'Daniel Borkmann
Yoshiki Komachi says: ==================== When I tried a test based on the selftest program for BPF flow dissector (test_flow_dissector.sh), I observed unexpected result as below: $ tc filter add dev lo parent ffff: protocol ip pref 1337 flower ip_proto \ udp src_port 8-10 action drop $ tools/testing/selftests/bpf/test_flow_dissector -i 4 -f 9 -F inner.dest4: 127.0.0.1 inner.source4: 127.0.0.3 pkts: tx=10 rx=10 The last rx means the number of received packets. I expected rx=0 in this test (i.e., all received packets should have been dropped), but it resulted in acceptance. Although the previous commit 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload") added new flag and field toward filtering based on port ranges with hw-offload, it missed applying for BPF flow dissector then. As a result, BPF flow dissector currently stores data extracted from packets in incorrect field used for exact match whenever packets are classified by filters based on port ranges. Thus, they never match rules in such cases because flow dissector gives rise to generating incorrect flow keys. This series fixes the issue by replacing incorrect flag and field with new ones in BPF flow dissector, and adds a test for filtering based on specified port ranges to the existing selftest program. Changes in v2: - set key_ports to NULL at the top of __skb_flow_bpf_to_target() ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2020-01-27selftests/bpf: Add test based on port range for BPF flow dissectorYoshiki Komachi
Add a simple test to make sure that a filter based on specified port range classifies packets correctly. Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117070533.402240-3-komachi.yoshiki@gmail.com
2020-01-27flow_dissector: Fix to use new variables for port ranges in bpf hookYoshiki Komachi
This patch applies new flag (FLOW_DISSECTOR_KEY_PORTS_RANGE) and field (tp_range) to BPF flow dissector to generate appropriate flow keys when classified by specified port ranges. Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload") Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117070533.402240-2-komachi.yoshiki@gmail.com
2020-01-27Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-01-26 Here's (probably) the last bluetooth-next pull request for the 5.6 kernel. - Initial pieces of Bluetooth 5.2 Isochronous Channels support - mgmt: Various cleanups and a new Set Blocked Keys command - btusb: Added support for 04ca:3021 QCA_ROME device - hci_qca: Multiple fixes & cleanups - hci_bcm: Fixes & improved device tree support - Fixed attempts to create duplicate debugfs entries Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'Christophe JAILLET
'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here looks reversed. Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep the correct semantic. In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8. Fixes: 107dec2749fe ("drivers: net: xgene: Add support for multiple queues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bpf, xdp: Remove no longer required rcu_read_{un}lock()John Fastabend
Now that we depend on rcu_call() and synchronize_rcu() to also wait for preempt_disabled region to complete the rcu read critical section in __dev_map_flush() is no longer required. Except in a few special cases in drivers that need it for other reasons. These originally ensured the map reference was safe while a map was also being free'd. And additionally that bpf program updates via ndo_bpf did not happen while flush updates were in flight. But flush by new rules can only be called from preempt-disabled NAPI context. The synchronize_rcu from the map free path and the rcu_call from the delete path will ensure the reference there is safe. So lets remove the rcu_read_lock and rcu_read_unlock pair to avoid any confusion around how this is being protected. If the rcu_read_lock was required it would mean errors in the above logic and the original patch would also be wrong. Now that we have done above we put the rcu_read_lock in the driver code where it is needed in a driver dependent way. I think this helps readability of the code so we know where and why we are taking read locks. Most drivers will not need rcu_read_locks here and further XDP drivers already have rcu_read_locks in their code paths for reading xdp programs on RX side so this makes it symmetric where we don't have half of rcu critical sections define in driver and the other half in devmap. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/1580084042-11598-4-git-send-email-john.fastabend@gmail.com
2020-01-27bpf, xdp: virtio_net use access ptr macro for xdp enable checkJohn Fastabend
virtio_net currently relies on rcu critical section to access the xdp program in its xdp_xmit handler. However, the pointer to the xdp program is only used to do a NULL pointer comparison to determine if xdp is enabled or not. Use rcu_access_pointer() instead of rcu_dereference() to reflect this. Then later when we drop rcu_read critical section virtio_net will not need in special handling. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/1580084042-11598-3-git-send-email-john.fastabend@gmail.com
2020-01-27bpf, xdp: Update devmap comments to reflect napi/rcu usageJohn Fastabend
Now that we rely on synchronize_rcu and call_rcu waiting to exit perempt-disable regions (NAPI) lets update the comments to reflect this. Fixes: 0536b85239b84 ("xdp: Simplify devmap cleanup") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1580084042-11598-2-git-send-email-john.fastabend@gmail.com
2020-01-27r8169: don't set min_mtu/max_mtu if not neededHeiner Kallweit
Defaults for min_mtu and max_mtu are set by ether_setup(), which is called from devm_alloc_etherdev(). Let rtl_jumbo_max() only return a positive value if actually jumbo packets are supported. This also allows to remove constant Jumbo_1K which is a little misleading anyway. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()'Christophe JAILLET
An 'alloc_etherdev()' called is not ballanced by a corresponding 'free_netdev()' call in one error handling path. Slighly reorder the error handling code to catch the missed case. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: dsa: Fix use-after-free in probing of DSA switch treeVladimir Oltean
DSA sets up a switch tree little by little. Every switch of the N members of the tree calls dsa_register_switch, and (N - 1) will just touch the dst->ports list with their ports and quickly exit. Only the last switch that calls dsa_register_switch will find all DSA links complete in dsa_tree_setup_routing_table, and not return zero as a result but instead go ahead and set up the entire DSA switch tree (practically on behalf of the other switches too). The trouble is that the (N - 1) switches don't clean up after themselves after they get an error such as EPROBE_DEFER. Their footprint left in dst->ports by dsa_switch_touch_ports is still there. And switch N, the one responsible with actually setting up the tree, is going to work with those stale dp, dp->ds and dp->ds->dev pointers. In particular ds and ds->dev might get freed by the device driver. Be there a 2-switch tree and the following calling order: - Switch 1 calls dsa_register_switch - Calls dsa_switch_touch_ports, populates dst->ports - Calls dsa_port_parse_cpu, gets -EPROBE_DEFER, exits. - Switch 2 calls dsa_register_switch - Calls dsa_switch_touch_ports, populates dst->ports - Probe doesn't get deferred, so it goes ahead. - Calls dsa_tree_setup_routing_table, which returns "complete == true" due to Switch 1 having called dsa_switch_touch_ports before. - Because the DSA links are complete, it calls dsa_tree_setup_switches now. - dsa_tree_setup_switches iterates through dst->ports, initializing the Switch 1 ds structure (invalid) and the Switch 2 ds structure (valid). - Undefined behavior (use after free, sometimes NULL pointers, etc). Real example below (debugging prints added by me, as well as guards against NULL pointers): [ 5.477947] dsa_tree_setup_switches: Setting up port 0 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.313002] dsa_tree_setup_switches: Setting up port 1 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.319932] dsa_tree_setup_switches: Setting up port 2 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.329693] dsa_tree_setup_switches: Setting up port 3 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.339458] dsa_tree_setup_switches: Setting up port 4 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.349226] dsa_tree_setup_switches: Setting up port 5 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.358991] dsa_tree_setup_switches: Setting up port 6 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.368758] dsa_tree_setup_switches: Setting up port 7 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.378524] dsa_tree_setup_switches: Setting up port 8 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.388291] dsa_tree_setup_switches: Setting up port 9 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.398057] dsa_tree_setup_switches: Setting up port 10 of switch ffffff803df0b980 (dev ffffff803f775c00) [ 6.407912] dsa_tree_setup_switches: Setting up port 0 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.417682] dsa_tree_setup_switches: Setting up port 1 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.427446] dsa_tree_setup_switches: Setting up port 2 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.437212] dsa_tree_setup_switches: Setting up port 3 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.446979] dsa_tree_setup_switches: Setting up port 4 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.456744] dsa_tree_setup_switches: Setting up port 5 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.466512] dsa_tree_setup_switches: Setting up port 6 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.476277] dsa_tree_setup_switches: Setting up port 7 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.486043] dsa_tree_setup_switches: Setting up port 8 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.495810] dsa_tree_setup_switches: Setting up port 9 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.505577] dsa_tree_setup_switches: Setting up port 10 of switch ffffff803da02f80 (dev 0000000000000000) [ 6.515433] dsa_tree_setup_switches: Setting up port 0 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.354120] dsa_tree_setup_switches: Setting up port 1 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.361045] dsa_tree_setup_switches: Setting up port 2 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.370805] dsa_tree_setup_switches: Setting up port 3 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.380571] dsa_tree_setup_switches: Setting up port 4 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.390337] dsa_tree_setup_switches: Setting up port 5 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.400104] dsa_tree_setup_switches: Setting up port 6 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.409872] dsa_tree_setup_switches: Setting up port 7 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.419637] dsa_tree_setup_switches: Setting up port 8 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.429403] dsa_tree_setup_switches: Setting up port 9 of switch ffffff803db15b80 (dev ffffff803d8e4800) [ 7.439169] dsa_tree_setup_switches: Setting up port 10 of switch ffffff803db15b80 (dev ffffff803d8e4800) The solution is to recognize that the functions that call dsa_switch_touch_ports (dsa_switch_parse_of, dsa_switch_parse) have side effects, and therefore one should clean up their side effects on error path. The cleanup of dst->ports was taken from dsa_switch_remove and moved into a dedicated dsa_switch_release_ports function, which should really be per-switch (free only the members of dst->ports that are also members of ds, instead of all switch ports). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: remove eth_change_mtuHeiner Kallweit
All usage of this function was removed three years ago, and the function was marked as deprecated: a52ad514fdf3 ("net: deprecate eth_change_mtu, remove usage") So I think we can remove it now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'XDP-fixes-for-socionext-driver'David S. Miller
Lorenzo Bianconi says: ==================== XDP fixes for socionext driver Fix possible user-after-in XDP rx path Fix rx statistics accounting if no bpf program is attached ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: socionext: fix xdp_result initialization in netsec_process_rxLorenzo Bianconi
Fix xdp_result initialization in netsec_process_rx in order to not increase rx counters if there is no bpf program attached to the xdp hook and napi_gro_receive returns GRO_DROP Fixes: ba2b232108d3c ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: socionext: fix possible user-after-free in netsec_process_rxLorenzo Bianconi
Fix possible use-after-free in in netsec_process_rx that can occurs if the first packet is sent to the normal networking stack and the following one is dropped by the bpf program attached to the xdp hook. Fix the issue defining the skb pointer in the 'budget' loop Fixes: ba2b232108d3c ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'net-allow-per-net-notifier-to-follow-netdev-into-namespace'David S. Miller
Jiri Pirko says: ==================== net: allow per-net notifier to follow netdev into namespace Currently we have per-net notifier, which allows to get only notifications relevant to particular network namespace. That is enough for drivers that have netdevs local in a particular namespace (cannot move elsewhere). However if netdev can change namespace, per-net notifier cannot be used. Introduce dev_net variant that is basically per-net notifier with an extension that re-registers the per-net notifier upon netdev namespace change. Basically the per-net notifier follows the netdev into namespace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mlx5: Use dev_net netdevice notifier registrationsJiri Pirko
Register the dev_net notifier and allow the per-net notifier to follow the device into different namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: introduce dev_net notifier register/unregister variantsJiri Pirko
Introduce dev_net variants of netdev notifier register/unregister functions and allow per-net notifier to follow the netdevice into the namespace it is moved to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: push code from net notifier reg/unreg into helpersJiri Pirko
Push the code which is done under rtnl lock in net notifier register and unregister function into separate helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: call call_netdevice_unregister_net_notifiers from unregisterJiri Pirko
The function does the same thing as the existing code, so rather call call_netdevice_unregister_net_notifiers() instead of code duplication. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27soreuseport: Cleanup duplicate initialization of more_reuse->max_socks.Kuniyuki Iwashima
reuseport_grow() does not need to initialize the more_reuse->max_socks again. It is already initialized in __reuseport_alloc(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'Support-fraglist-GRO-GSO'David S. Miller
Steffen Klassert says: ==================== Support fraglist GRO/GSO This patchset adds support to do GRO/GSO by chaining packets of the same flow at the SKB frag_list pointer. This avoids the overhead to merge payloads into one big packet, and on the other end, if GSO is needed it avoids the overhead of splitting the big packet back to the native form. Patch 1 adds netdev feature flags to enable fraglist GRO, this implements one of the configuration options discussed at netconf 2019. Patch 2 adds a netdev software feature set that defaults to off and assigns the new fraglist GRO feature flag to it. Patch 3 adds the core infrastructure to do fraglist GRO/GSO. Patch 4 enables UDP to use fraglist GRO/GSO if configured. I have only meaningful forwarding performance measurements. I did some tests for the local receive path with netperf and iperf, but in this case the sender that generates the packets is the bottleneck. So the benchmarks are not that meaningful for the receive path. Paolo Abeni did some benchmarks of the local receive path for the RFC v2 version of this pachset, results can be found here: https://www.spinics.net/lists/netdev/msg551158.html I used my IPsec forwarding test setup for the performance measurements: ------------ ------------ -->| router 1 |-------->| router 2 |-- | ------------ ------------ | | | | -------------------- | --------|Spirent Testcenter|<---------- -------------------- net-next (September 7th 2019): Single stream UDP frame size 1460 Bytes: 1.161.000 fps (13.5 Gbps). ---------------------------------------------------------------------- net-next (September 7th 2019) + standard UDP GRO/GSO (not implemented in this patchset): Single stream UDP frame size 1460 Bytes: 1.801.000 fps (21 Gbps). ---------------------------------------------------------------------- net-next (September 7th 2019) + fraglist UDP GRO/GSO: Single stream UDP frame size 1460 Bytes: 2.860.000 fps (33.4 Gbps). ======================================================================= net-next (January 23th 2020): Single stream UDP frame size 1460 Bytes: 919.000 fps (10.73 Gbps). ---------------------------------------------------------------------- net-next (January 23th 2020) + fraglist UDP GRO/GSO: Single stream UDP frame size 1460 Bytes: 2.430.000 fps (28.38 Gbps). ----------------------------------------------------------------------- Changes from RFC v1: - Add IPv6 support. - Split patchset to enable UDP GRO by default before adding fraglist GRO support. - Mark fraglist GRO packets as CHECKSUM_NONE. - Take a refcount on the first segment skb when doing fraglist segmentation. With this we can use the same error handling path as with standard segmentation. Changes from RFC v2: - Add a netdev feature flag to configure listifyed GRO. - Fix UDP GRO enabling for IPv6. - Fix a rcu_read_lock() imbalance. - Fix error path in skb_segment_list(). Changes from RFC v3: - Rename NETIF_F_GRO_LIST to NETIF_F_GRO_FRAGLIST and add NETIF_F_GSO_FRAGLIST. - Move introduction of SKB_GSO_FRAGLIST to patch 2. - Use udpv6_encap_needed_key instead of udp_encap_needed_key in IPv6. - Move some missplaced code from patch 5 to patch 1 where it belongs to. Changes from RFC v4: - Drop the 'UDP: enable GRO by default' patch for now. Standard UDP GRO is not changed with this patchset. - Rebase to net-next current. Changes fom v1 (December 18th): - Do a full __copy_skb_header instead of tryng to find the really needed subset header fields. Thisa can be done later. - Mark all fraglist GRO packets with CHECKSUM_UNNECESSARY. - Rebase to net-next current. Changes fom v2 (January 24th): - Do the CHECKSUM_UNNECESSARY setting from IPv4 for IPv6 too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27udp: Support UDP fraglist GRO/GSO.Steffen Klassert
This patch extends UDP GRO to support fraglist GRO/GSO by using the previously introduced infrastructure. If the feature is enabled, all UDP packets are going to fraglist GRO (local input and forward). After validating the csum, we mark ip_summed as CHECKSUM_UNNECESSARY for fraglist GRO packets to make sure that the csum is not touched. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: Support GRO/GSO fraglist chaining.Steffen Klassert
This patch adds the core functions to chain/unchain GSO skbs at the frag_list pointer. This also adds a new GSO type SKB_GSO_FRAGLIST and a is_flist flag to napi_gro_cb which indicates that this flow will be GROed by fraglist chaining. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: Add a netdev software feature set that defaults to off.Steffen Klassert
The previous patch added the NETIF_F_GRO_FRAGLIST feature. This is a software feature that should default to off. Current software features default to on, so add a new feature set that defaults to off. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: Add fraglist GRO/GSO feature flagsSteffen Klassert
This adds new Fraglist GRO/GSO feature flags. They will be used to configure fraglist GRO/GSO what will be implemented with some followup paches. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mvneta driver disallow XDP program on hardware buffer managementSven Auhagen
Recently XDP Support was added to the mvneta driver for software buffer management only. It is still possible to attach an XDP program if hardware buffer management is used. It is not doing anything at that point. The patch disallows attaching XDP programs to mvneta if hardware buffer management is used. I am sorry about that. It is my first submission and I am having some troubles with the format of my emails. v4 -> v5: - Remove extra tabs v3 -> v4: - Please ignore v3 I accidentally submitted my other patch with git-send-mail and v4 is correct v2 -> v3: - My mailserver corrupted the patch resubmission with git-send-email v1 -> v2: - Fixing the patches indentation Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branches 'acpi-tables', 'acpi-button', 'acpi-ec', 'acpi-doc' and ↵Rafael J. Wysocki
'acpi-tools' * acpi-tables: ACPI: PPTT: Consistently use unsigned int as parameter type * acpi-button: ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch * acpi-ec: ACPI: EC: Reference count query handlers under lock * acpi-doc: docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan() * acpi-tools: tools/power/acpi: fix compilation error
2020-01-27Merge branches 'acpi-battery', 'acpi-video', 'acpi-fan' and 'acpi-drivers'Rafael J. Wysocki
* acpi-battery: ACPI / battery: Deal better with neither design nor full capacity not being reported ACPI / battery: Use design-cap for capacity calculations if full-cap is not available ACPI / battery: Deal with design or full capacity being reported as -1 * acpi-video: ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards ACPI: video: Use native backlight on Lenovo E41-25/45 ACPI: video: fix typo in comment * acpi-fan: ACPI: fan: Expose fan performance state information * acpi-drivers: thermal: int340x_thermal: Add Tiger Lake ACPI device IDs platform/x86: intel-hid: Add Tiger Lake ACPI device ID ACPI: fan: Add Tiger Lake ACPI device ID ACPI: DPTF: Add Tiger Lake ACPI device IDs
2020-01-27Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200110 ACPICA: All acpica: Update copyrights to 2020 Including tool signons. ACPICA: Update the list of maintainers ACPICA: Update version to 20191213 ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator ACPICA: acpisrc: add unix line ending support for non-windows build ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 ACPICA: debugger: fix spelling mistake "adress" -> "address"
2020-01-27rxrpc: Fix use-after-free in rxrpc_receive_data()David Howells
The subpacket scanning loop in rxrpc_receive_data() references the subpacket count in the private data part of the sk_buff in the loop termination condition. However, when the final subpacket is pasted into the ring buffer, the function is no longer has a ref on the sk_buff and should not be looking at sp->* any more. This point is actually marked in the code when skb is cleared (but sp is not - which is an error). Fix this by caching sp->nr_subpackets in a local variable and using that instead. Also clear 'sp' to catch accesses after that point. This can show up as an oops in rxrpc_get_skb() if sp->nr_subpackets gets trashed by the sk_buff getting freed and reused in the meantime. Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net_sched: ematch: reject invalid TCF_EM_SIMPLEEric Dumazet
It is possible for malicious userspace to set TCF_EM_SIMPLE bit even for matches that should not have this bit set. This can fool two places using tcf_em_is_simple() 1) tcf_em_tree_destroy() -> memory leak of em->data if ops->destroy() is NULL 2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes of a kernel pointer. BUG: memory leak unreferenced object 0xffff888121850a40 (size 32): comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s) hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline] [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline] [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671 [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127 [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline] [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32 [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline] [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline] [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300 [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline] [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219 [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104 [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415 [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline] [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline] [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27bpf: map_seq_next should always increase position indexVasily Averin
If seq_file .next fuction does not change position index, read after some lseek can generate an unexpected output. See also: https://bugzilla.kernel.org/show_bug.cgi?id=206283 v1 -> v2: removed missed increment in end of function Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/eca84fdd-c374-a154-d874-6c7b55fc3bc4@virtuozzo.com
2020-01-27net: include struct nhmsg size in nh nlmsg sizeStephen Worley
Include the size of struct nhmsg size when calculating how much of a payload to allocate in a new netlink nexthop notification message. Without this, we will fail to fill the skbuff at certain nexthop group sizes. You can reproduce the failure with the following iproute2 commands: ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add dummy3 type dummy ip link add dummy4 type dummy ip link add dummy5 type dummy ip link add dummy6 type dummy ip link add dummy7 type dummy ip link add dummy8 type dummy ip link add dummy9 type dummy ip link add dummy10 type dummy ip link add dummy11 type dummy ip link add dummy12 type dummy ip link add dummy13 type dummy ip link add dummy14 type dummy ip link add dummy15 type dummy ip link add dummy16 type dummy ip link add dummy17 type dummy ip link add dummy18 type dummy ip link add dummy19 type dummy ip ro add 1.1.1.1/32 dev dummy1 ip ro add 1.1.1.2/32 dev dummy2 ip ro add 1.1.1.3/32 dev dummy3 ip ro add 1.1.1.4/32 dev dummy4 ip ro add 1.1.1.5/32 dev dummy5 ip ro add 1.1.1.6/32 dev dummy6 ip ro add 1.1.1.7/32 dev dummy7 ip ro add 1.1.1.8/32 dev dummy8 ip ro add 1.1.1.9/32 dev dummy9 ip ro add 1.1.1.10/32 dev dummy10 ip ro add 1.1.1.11/32 dev dummy11 ip ro add 1.1.1.12/32 dev dummy12 ip ro add 1.1.1.13/32 dev dummy13 ip ro add 1.1.1.14/32 dev dummy14 ip ro add 1.1.1.15/32 dev dummy15 ip ro add 1.1.1.16/32 dev dummy16 ip ro add 1.1.1.17/32 dev dummy17 ip ro add 1.1.1.18/32 dev dummy18 ip ro add 1.1.1.19/32 dev dummy19 ip next add id 1 via 1.1.1.1 dev dummy1 ip next add id 2 via 1.1.1.2 dev dummy2 ip next add id 3 via 1.1.1.3 dev dummy3 ip next add id 4 via 1.1.1.4 dev dummy4 ip next add id 5 via 1.1.1.5 dev dummy5 ip next add id 6 via 1.1.1.6 dev dummy6 ip next add id 7 via 1.1.1.7 dev dummy7 ip next add id 8 via 1.1.1.8 dev dummy8 ip next add id 9 via 1.1.1.9 dev dummy9 ip next add id 10 via 1.1.1.10 dev dummy10 ip next add id 11 via 1.1.1.11 dev dummy11 ip next add id 12 via 1.1.1.12 dev dummy12 ip next add id 13 via 1.1.1.13 dev dummy13 ip next add id 14 via 1.1.1.14 dev dummy14 ip next add id 15 via 1.1.1.15 dev dummy15 ip next add id 16 via 1.1.1.16 dev dummy16 ip next add id 17 via 1.1.1.17 dev dummy17 ip next add id 18 via 1.1.1.18 dev dummy18 ip next add id 19 via 1.1.1.19 dev dummy19 ip next add id 1111 group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19 ip next del id 1111 Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27tools/bpf: Allow overriding llvm tools for runqslowerAndrey Ignatov
tools/testing/selftests/bpf/Makefile supports overriding clang, llc and other tools so that custom ones can be used instead of those from PATH. It's convinient and heavily used by some users. Apply same rules to runqslower/Makefile. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200124224142.1833678-1-rdna@fb.com
2020-01-27net_sched: walk through all child classes in tc_bind_tclass()Cong Wang
In a complex TC class hierarchy like this: tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit \ avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit \ rate 6Mbit weight 0.6Mbit prio 8 allot 1514 cell 8 maxburst 20 \ avpkt 1000 bounded tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \ sport 80 0xffff flowid 1:3 tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \ sport 25 0xffff flowid 1:4 tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit \ rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20 \ avpkt 1000 tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit \ rate 3Mbit weight 0.3Mbit prio 5 allot 1514 cell 8 maxburst 20 \ avpkt 1000 where filters are installed on qdisc 1:0, so we can't merely search from class 1:1 when creating class 1:3 and class 1:4. We have to walk through all the child classes of the direct parent qdisc. Otherwise we would miss filters those need reverse binding. Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net_sched: fix ops->bind_class() implementationsCong Wang
The current implementations of ops->bind_class() are merely searching for classid and updating class in the struct tcf_result, without invoking either of cl_ops->bind_tcf() or cl_ops->unbind_tcf(). This breaks the design of them as qdisc's like cbq use them to count filters too. This is why syzbot triggered the warning in cbq_destroy_class(). In order to fix this, we have to call cl_ops->bind_tcf() and cl_ops->unbind_tcf() like the filter binding path. This patch does so by refactoring out two helper functions __tcf_bind_filter() and __tcf_unbind_filter(), which are lockless and accept a Qdisc pointer, then teaching each implementation to call them correctly. Note, we merely pass the Qdisc pointer as an opaque pointer to each filter, they only need to pass it down to the helper functions without understanding it at all. Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class") Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework updates for v5.6 from Viresh Kumar: "This contains a single patchset to fix reference counting of OPP table structures." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Replace list_kref with a local counter opp: Free static OPPs on errors while adding them
2020-01-27Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq material for v5.6 from Viresh Kumar: "This contains: - Update to imx cpufreq driver to add support for i.MX8MP platform. - Blacklists few NVIDIA SoCs from cpufreq-dt-platdev layer. - Convertion of few platform drivers to use devm_platform_ioremap_resource(). - Fixed refcount imbalance in few drivers." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount cpufreq: s3c: fix unbalances of cpufreq policy refcount cpufreq: imx-cpufreq-dt: Add i.MX8MP support cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading cpufreq: tegra186: convert to devm_platform_ioremap_resource cpufreq: kirkwood: convert to devm_platform_ioremap_resource
2020-01-27thermal: exynos: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200104152107.11407-7-krzk@kernel.org
2020-01-27thermal: generic-adc: silence info message for IIO_TEMP channelsMartin Blumenstingl
Since commit d36e2fa0253875 ("thermal: generic-adc: make lookup table optional") "generic-adc-thermal" can be used with an IIO_TEMP channel. In this case the following message is logged at probe time: no lookup table, assuming DAC channel returns milliCelcius Silence this info message if the channel type is known to be in milli celsius. Keep this message when the channel type is unknown or not of type temperature. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200107232044.889075-3-martin.blumenstingl@googlemail.com
2020-01-27thermal: generic-adc: silence "no lookup table" on deferred probeMartin Blumenstingl
A "generic-adc-thermal" without "temperature-lookup-table" is perfectly valid since commit d36e2fa0253875 ("thermal: generic-adc: make lookup table optional"). On deferred probe the message "no lookup table, assuming DAC channel returns milliCelcius" is still logged. Prevent this message on deferred probe of the IIO channel by first looking up the IIO channel. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200107232044.889075-2-martin.blumenstingl@googlemail.com
2020-01-27dt-bindings: thermal: Add YAML schema for sun8i-thermal driver bindingsYangtao Li
sun8i-thermal driver supports thermal sensor in wide range of Allwinner SoCs. Add YAML schema for its bindings. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219172823.1652600-3-anarsoul@gmail.com
2020-01-27thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40Yangtao Li
This patch adds the support for allwinner thermal sensor, within allwinner SoC. It will register sensors for thermal framework and use device tree to bind cooling device. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219172823.1652600-2-anarsoul@gmail.com
2020-01-27thermal/drivers/of-thermal: Move the of_thermal_free_zone() to the init sectionDaniel Lezcano
The function of_thermal_free_zone() is only used the initialization function which all belonging to the init section. Move it also to the __init section. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219222154.16100-2-daniel.lezcano@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 04:53:26 +0000