| Age | Commit message (Collapse) | Author |
|---|
|
The VSC7511, VSC7512, VSC7513 and VSC7514 all have the ability to be
controlled either internally by a memory-mapped CPU, or externally via
interfaces like SPI and PCIe. The internal CPU of the VSC7511 and 7512
don't have the resources to run Linux, so must be controlled via these
external interfaces in a DSA configuration.
Add mscc,vsc7512-switch compatible string to indicate that the chips are
being controlled externally in a DSA configuration.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The *_RES_SIZE macros are initally <= 0x100. Future resource sizes will be
upwards of 0x200000 in size.
To keep things clean, fully align the RES_SIZE macros to 32-bit to do
nothing more than make the code more consistent.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the Felix driver would probe the ports and verify functionality, it
would fail if it hit single port mode that wasn't supported by the driver.
The initial case for the VSC7512 driver will have physical ports that
exist, but aren't supported by the driver implementation. Add the
OCELOT_PORT_MODE_NONE macro to handle this scenario, and allow the Felix
driver to continue with all the ports that are currently functional.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The architecture around the VSC7512 differs from existing felix drivers. In
order to add support for all the chip's features (pinctrl, MDIO, gpio) the
device had to be laid out as a multi-function device (MFD).
One difference between an MFD and a standard platform device is that the
regmaps are allocated to the parent device before the child devices are
probed. As such, there is no need for felix to initialize new regmaps in
these configurations, they can simply be requested from the parent device.
Add support for MFD configurations by performing this request from the
parent device.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The define FELIX_MAC_QUIRKS was used directly in the felix.c shared driver.
Other devices (VSC7512 for example) don't require the same quirks, so they
need to be configured on a per-device basis.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VSC7514 target regmap is identical for ones shared with similar
hardware, specifically the VSC7512. Share this resource, and change the
name to match the pattern of other exported resources.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Resetting the switch core is the same whether it is done internally or
externally. Move this routine to the ocelot library so it can be used by
other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The vcap_props structure is common to other devices, specifically the
VSC7512 chip that can only be controlled externally. Export this structure
so it doesn't need to be recreated.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ocelot_regfields struct is common between several different chips, some
of which can only be controlled externally. Export this structure so it
doesn't have to be duplicated in these other drivers.
Rename the structure as well, to follow the conventions of other shared
resources.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose ocelot_wm functions so they can be shared with other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phy id is usually defined in lower case.
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230128063558.5850-2-Frank.Sae@motor-comm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CHECK: 'sentinal' may be misspelled - perhaps 'sentinel'?
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230128063558.5850-1-Frank.Sae@motor-comm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SuperH does not include uaccess.h, even tho it calls access_ok().
Fixes: 68f4eae781dd ("net: checksum: drop the linux/uaccess.h include")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230128073108.1603095-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function __b44_cam_read() is defined in the b44.c file, but not called
elsewhere, so remove this unused function.
drivers/net/ethernet/broadcom/b44.c:199:20: warning: unused function '__b44_cam_read'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3858
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230128090413.79824-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the fast DEK update is fully implemented, use it for kTLS to get
better performance.
TIS pool was already supported to recycle the TISes. With this series
and TIS pool, TLS CPS is improved by 9x higher, from 11k/s to 101k/s.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
One bulk with full available keys is left undestroyed, to service the
possible requests from users quickly.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
After invalidation, the idle bulk with all DEKs available for use, is
destroyed, to free keys and mem.
To get better performance, the firmware destruction operation is done
asynchronously. So idle bulks are enqueued in destroy_list first, then
destroyed in system workqueue. This will improve performance, as the
destruction doesn't need to hold pool's mutex.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To fast update encryption keys, those freed keys with need_sync bit 1
and in_use bit 0 in a bulk, can be recycled. The keys are cached
internally by the NIC, so invalidating internal NIC caches by
SYNC_CRYPTO command is required before reusing them. A threshold in
driver is added to avoid invalidating for every update. Only when the
number of DEKs, which need to be synced, is over this threshold, the
sync process will start. Besides, it is done in system workqueue.
After SYNC_CRYPTO command is executed successfully, the bitmaps of
each bulk must be reset accordingly, so that the freed DEKs can be
reused. From the analysis in previous patch, the number of reused DEKs
can be calculated by hweight_long(need_sync XOR in_use), and the
need_sync bits can be reset by simply copying from in_use bits.
Two more list (avail_list and sync_list) are added for each pool. The
avail_list is for a bulk when all bits in need_sync are reset after
sync. If there is no avail deks, and all are be freed by users, the
bulk is moved to sync_list, instead of being destroyed in previous
patch, and waiting for the invalidation. While syncing, they are
simply reset need_sync bits, and moved to avail_list.
Besides, add a wait_for_free list for the to-be-free DEKs. It is to
avoid this corner case: when thread A is done with SYNC_CRYPTO but just
before starting to reset the bitmaps, thread B is alloc dek, and free
it immediately. It's obvious that this DEK can't be reused this time,
so put it to waiting list, and do free after bulk bitmaps reset is
finished.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
We create a pool for each key type. For the pool, there is a struct
to store the info for all DEK objects of one bulk allocation. As we
use crypto->log_dek_obj_range, which is set to 12 in previous patch,
for the log_obj_range of bulk allocation, 4096 DEKs are allocated in
one time.
To trace the state of all the keys in a bulk, two bitmaps are created.
The need_sync bitmap is used to indicate the available state of the
corresponding key. If the bit is 0, it can be used (available) as it
either is newly created by FW, or SYNC_CRYPTO is executed and bit is
reset after it is freed by upper layer user (this is the case to be
handled in later patch). Otherwise, the key need to be synced. The
in_use bitmap is used to indicate the key is being used, and reset
when user free it.
When ktls, ipsec or macsec need a key from a bulk, it get one with
need_sync bit 0, then set both need_sync and in_used bit to 1. When
user free a key, only in_use bit is reset to 0. So, for the
combinations of (need_sync, in_use) of one DEK object,
- (0,0) means the key is ready for use,
- (1,1) means the key is currently being used by a user,
- (1,0) means the key is freed, and waiting for being synced,
- (0,1) is invalid state.
There are two lists in each pool, partial_list and full_list,
according to the number for available DEKs in a bulk. When user need a
key, it get a bulk, either from partial list, or create new one from
FW. Then the bulk is put in the different pool's lists according to
the num of avail deks it has. If there is no avail deks, and all of
them are be freed by users, for now, the bulk is destroyed.
To speed up the bitmap search, a variable (avail_start) is added to
indicate where to start to search need_sync bitmap for available key.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To support fast update of keys into hardware, we optimize firmware to
achieve the maximum rate. The approach is to create DEK objects in
bulk, and update each of them with modify command.
This patch supports bulk allocation and modify_dek commands for new
firmware. However, as log_obj_range is 0 for now, only one DEK obj is
allocated each time, and then updated with user key by modify_dek.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for SYNC_CRYPTO command. For now, it is executed only when
initializing DEK, but needed when reusing keys in later patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
New APIs are added to support fast update DEKs. As a pool is created
for each key purpose (type), one pair of pool APIs to get/put pool.
Anotehr pair of DEKs APIs is to get DEK object from pool and update it
with user key, or free it back to the pool. As The bulk allocation
and destruction will be supported in later patches, old implementation
is used here.
To support these APIs, pool and dek structs are defined first. Only
small number of fields are stored in them. For example, key_purpose
and refcnt in pool struct, DEK object id in dek struct. More fields
will be added to these structs in later patches, for example, the
different bulk lists for pool struct, the bulk pointer dek struct
belongs to, and a list_entry for the list in a pool, which is used to
save keys waiting for being freed while other thread is doing sync.
Besides the creation and destruction interfaces, new one is also added
to get obj id.
Currently these APIs are planned to used by TLS only.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Move the common code to general functions which can be used by fast
update encryption key in later patches.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change key pointer to const void *, as there is no need to change the
key content. This is also to avoid modifying the key by mistake.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add CAP for crypto offload, do the simple initialization if hardware
supports it. Currently set log_dek_obj_range to 12, so 4k DEKs will be
created in one bulk allocation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change the naming of key type in DEK fields and macros, to be
consistent with the device spec.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add and extend structure layouts and defines for fast crypto key
update. This is a prerequisite to support bulk creation, key
modification and destruction, software wrapped DEK, and SYNC_CRYPTO
command.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this patch, the log_obj_range was defined inside
general_obj_in_cmd_hdr to support bulk allocation. However, we need to
modify/query one of the object in the bulk in later patch, so change
those fields to param bits for parameters specific for cmd header, and
add general_obj_create_param according to what was updated in spec.
We will also add general_obj_query_param for modify/query later.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Take crypto API out of the generic mlx5.h header into a dedicated
header.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Jakub Kicinski says:
====================
devlink: fix reload notifications and remove features
First two patches adjust notifications during devlink reload.
The last patch removes no longer needed devlink features.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink features were introduced to disallow devlink reload calls of
userspace before the devlink was fully initialized. The reason for this
workaround was the fact that devlink reload was originally called
without devlink instance lock held.
However, with recent changes that converted devlink reload to be
performed under devlink instance lock, this is redundant so remove
devlink features entirely.
Note that mlx5 used this to enable devlink reload conditionally only
when device didn't act as multi port slave. Move the multi port check
into mlx5_devlink_reload_down() callback alongside with the other
checks preventing the device from reload in certain states.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the notifications are only sent for params. People who
introduced other objects forgot to add the reload notifications here.
To make sure all notifications happen according to existing comment,
benefit from existence of devlink_notify_register/unregister() helpers
and use them in reload code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
calls
This effectively reverts commit 05a7f4a8dff1 ("devlink: Break parameter
notification sequence to be before/after unload/load driver").
Cited commit resolved a problem in mlx5 params implementation,
when param notification code accessed memory previously freed
during reload.
Now, when the params can be registered and unregistered when devlink
instance is registered, mlx5 code unregisters the problematic param
during devlink reload. The fix is therefore no longer needed.
Current behavior is a it problematic, as it sends DEL notifications even
in potential case when reload_down() call fails which might confuse
userspace notifications listener.
So move the reload notifications back where they were originally in
between reload_down() and reload_up() calls.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Steen Hegelund says:
====================
Adding Sparx5 ES2 VCAP support
This provides the Egress Stage 2 (ES2) VCAP (Versatile Content-Aware
Processor) support for the Sparx5 platform.
The ES2 VCAP is an Egress Access Control VCAP that uses frame keyfields and
previously classified keyfields to apply e.g. policing, trapping or
mirroring to frames.
The ES2 VCAP has 2 lookups and they are accessible with a TC chain id:
- chain 20000000: ES2 Lookup 0
- chain 20100000: ES2 Lookup 1
As the other Sparx5 VCAPs the ES2 VCAP has its own lookup/port keyset
configuration that decides which keys will be used for matching on which
traffic type.
The ES2 VCAP has these traffic classifications:
- IPv4 frames
- IPv6 frames
- Other frames
The ES2 VCAP can match on an ISDX key (Ingress Service Index) as one of the
frame metadata keyfields. The IS0 VCAP can update this key using its
actions, and this allows a IS0 VCAP rule to be linked to an ES2 rule.
This is similar to how the IS0 VCAP and the IS2 VCAP use the PAG
(Policy Association Group) keyfield to link rules.
From user space this is exposed via "chain offsets", so an IS0 rule with a
"goto chain 20000015" action will use an ISDX key value of 15 to link to a
rule in the ES2 VCAP attached to the same chain id.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This enhances the KUNIT test of the VCAP API with tests of the chaining
functionality.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This enables the TC command to use the Sparx5 ES2 VCAP, and provides a new
ES2 ethertype table and handling of rule links between IS0 and ES2.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows the check of the goto action to be specific to the ingress and
egress VCAP instances.
The debugfs support is also updated to show this information.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the ES2 VCAP port keyset configuration for Sparx5 and also
updates the debugFS support to show the keyset configuration and the egress
port mask.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides the VCAP model for the Sparx5 ES2 (Egress Stage 2) VCAP.
This VCAP provides tagging and remarking functionality
This also renames a VCAP keyfield: VCAP_KF_MIRROR_ENA becomes
VCAP_KF_MIRROR_PROBE, as the first name was caused by a mistake in the
model transformation.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This improves the error message when a TC filter with CVLAN tag is used and
the selected VCAP instance does not support this.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This ensures that it will be possible for a VCAP rule to distinguish IPv6
frames from non-IP frames, as the IS0 keyset usually selected for the IPv6
traffic class in (7TUPLE) does not offer a key that specifies IPv6
directly: only non-IPv4.
The IP_SNAP key ensures that we select (at least) IP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When there is only one keyset available for a certain VCAP rule size, the
particular keyset does not need a type id when encoded in the VCAP
Hardware.
This provides support for getting a keyset from a rule, when this is the
case: only one keyset fits this rule size.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
