| Age | Commit message (Collapse) | Author |
|---|
|
There is a race between cpu hotplug handling and adding/deleting
gendisk for blk-mq, where both are trying to register and unregister
the same sysfs entries.
null_add_dev
--> blk_mq_init_queue
--> blk_mq_init_allocated_queue
--> add to 'all_q_list' (*)
--> add_disk
--> blk_register_queue
--> blk_mq_register_disk (++)
null_del_dev
--> del_gendisk
--> blk_unregister_queue
--> blk_mq_unregister_disk (--)
--> blk_cleanup_queue
--> blk_mq_free_queue
--> del from 'all_q_list' (*)
blk_mq_queue_reinit
--> blk_mq_sysfs_unregister (-)
--> blk_mq_sysfs_register (+)
While the request queue is added to 'all_q_list' (*),
blk_mq_queue_reinit() can be called for the queue anytime by CPU
hotplug callback. But blk_mq_sysfs_unregister (-) and
blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called
before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--)
is finished. Because '/sys/block/*/mq/' is not exists.
There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can
be used to track these sysfs stuff, but it is only fixing this issue
partially.
In order to fix it completely, we just need per-queue flag instead of
per-hctx flag with appropriate locking. So this introduces
q->mq_sysfs_init_done which is properly protected with all_q_mutex.
Also, we need to ensure that blk_mq_map_swqueue() is called with
all_q_mutex is held. Since hctx->nr_ctx is reset temporarily and
updated in blk_mq_map_swqueue(), so we should avoid
blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value
in CPU hotplug handling or adding/deleting gendisk .
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When unmapped hw queue is remapped after CPU topology is changed,
hctx->tags->cpumask has to be set after hctx->tags is setup in
blk_mq_map_swqueue(), otherwise it causes null pointer dereference.
Fixes: f26cdc8536 ("blk-mq: Shared tag enhancements")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Commit fe78d0b7691c0274 ("spi: sh-msiof: Fix FIFO size to 64 word from
256 word") changed the default RX FIFO size on R-Car Gen2 SoCs in the
driver code, but forgot to update the DT bindings documentation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The enable bit indexes for DCDC4 and DCDC5 regulators are off by 1.
We haven't run into any problems with this since either the regulators
aren't defined in the DT and aren't used, or all the DCDC regulators
have the "always-on" property set, as they are almost always used
for system critical loads.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
my gcc 5.1 used an ldgr instruction with a register != 0,2,4,6 for
spilling/filling into a floating point register in our decompressor.
This will cause an AFP-register data exception as the decompressor
did not setup the additional floating point registers via cr0.
That causes a program check loop that looked like a hang with
one "Uncompressing Linux... " message (directly booted via kvm)
or a loop of "Uncompressing Linux... " messages (when booted via
zipl boot loader).
The offending code in my build was
48e400: e3 c0 af ff ff 71 lay %r12,-1(%r10)
-->48e406: b3 c1 00 1c ldgr %f1,%r12
48e40a: ec 6c 01 22 02 7f clij %r6,2,12,0x48e64e
but gcc could do spilling into an fpr at any function. We can
simply disable floating point support at that early stage.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: stable@vger.kernel.org
|
|
The current code assumes the 'irq_of_parse_and_map' will return NO_IRQ in case
of failure. Unfortunately, the NO_IRQ is not consistent across the different
architectures and we must not rely on it.
NO_IRQ is equal to '-1' on ARM and 'irq_of_parse_and_map' returns '0' in case
of an error. Hence, the latter won't be detected and will lead to a crash.
Fix this by just checking 'irq' is different from zero.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The current code assumes the 'irq_of_parse_and_map' will return NO_IRQ in case
of failure. Unfortunately, the NO_IRQ is not consistent across the different
architectures and we must not rely on it.
NO_IRQ is equal to '-1' on ARM and 'irq_of_parse_and_map' returns '0' in case
of an error. Hence, the latter won't be detected and will lead to a crash.
Fix this by just checking 'irq' is different from zero.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI error: init_volumes: not enough PEBs, required 706, available 686
UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1)
UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM
UBI error: ubi_init: cannot attach mtd1
If available PEBs are not enough when initializing volumes, return -ENOSPC
directly. If available PEBs are not enough when initializing WL, return
-ENOSPC instead of -ENOMEM.
Cc: stable@vger.kernel.org
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
|
|
Make sure that data_size is less than LEB size.
Otherwise a handcrafted UBI image is able to trigger
an out of bounds memory access in ubi_compare_lebs().
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
|
|
Fixes the following lockdep splat:
[ 1.244527] =============================================
[ 1.245193] [ INFO: possible recursive locking detected ]
[ 1.245193] 4.2.0-rc1+ #37 Not tainted
[ 1.245193] ---------------------------------------------
[ 1.245193] cp/742 is trying to acquire lock:
[ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0
[ 1.245193]
[ 1.245193] but task is already holding lock:
[ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280
[ 1.245193]
[ 1.245193] other info that might help us debug this:
[ 1.245193] Possible unsafe locking scenario:
[ 1.245193]
[ 1.245193] CPU0
[ 1.245193] ----
[ 1.245193] lock(&sb->s_type->i_mutex_key#9);
[ 1.245193] lock(&sb->s_type->i_mutex_key#9);
[ 1.245193]
[ 1.245193] *** DEADLOCK ***
[ 1.245193]
[ 1.245193] May be due to missing lock nesting notation
[ 1.245193]
[ 1.245193] 2 locks held by cp/742:
[ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50
[ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280
[ 1.245193]
[ 1.245193] stack backtrace:
[ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37
[ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014
[ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5
[ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68
[ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500
[ 1.245193] Call Trace:
[ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65
[ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510
[ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0
[ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80
[ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270
[ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0
[ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0
[ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0
[ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280
[ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0
[ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280
[ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0
[ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0
[ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90
[ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0
[ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180
[ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0
[ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40
[ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180
[ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200
[ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20
[ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f
While the lockdep splat is a false positive, becuase path_openat holds i_mutex
of the parent directory and ubifs_init_security() tries to acquire i_mutex
of a new inode, it reveals that taking i_mutex in ubifs_init_security() is
in vain because it is only being called in the inode allocation path
and therefore nobody else can see the inode yet.
Cc: stable@vger.kernel.org # 3.20-
Reported-and-tested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-and-tested-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: dedekind1@gmail.com
|
|
Move pxamci to mmc slot-gpio API to fix interrupt request.
It fixes the case where the card detection is on a gpio expander, on I2C
for example on zylonite board. In this case, the card detect netsted
interrupt is called from a threaded interrupt. The request_irq() fails,
because a hard irq cannot be a nested interrupt from a threaded
interrupt (set __setup_irq()).
This was tested on zylonite and mioa701 boards.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In recent allwinner kernel sources the mmc clk-delay settings have been
slightly tweaked, and for sun9i they are completely different then what
we are using.
This commit brings us in sync with what allwinner does, fixing problems
accessing sdcards on some A33 devices (and likely others).
For pre sun9i hardware this makes the following changes:
-At 400Khz change the sample delay from 7 to 0 (introduced in A31 sdk)
-At 50 Mhz change the sample delay from 5 to 4 (introduced in A23 sdk)
This also drops the clk-delay calculation for clocks > 50 MHz, we do
not need this as we've: mmc->f_max = 50000000, and the delays in the
old code were not correct (at 100 MHz the delay must be a multiple of 60,
at 200 MHz a multiple of 120).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When CONFIG_GPIOLIB is unset, its stubs will return -ENOSYS. That means
when the mmc core parses DT for CD/WP GPIOs via mmc_of_parse(), -ENOSYS
becomes propagated to the caller. Typically this means that the mmc host
driver fails to probe.
As the CD/WP GPIOs are already treated as optional, let's extend that to
cover the case when CONFIG_GPIOLIB is unset.
Reported-by: Michal Simek <michal.simek@xilinx.com>
Fixes: 16b23787fc70 ("mmc: sdhci-of-arasan: Call OF parsing for MMC")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus
Keyrings fixes from David Howells, for current Linus.
|
|
Seemingly innocuous sctp_trans_state_to_prio_map[] array
is way bigger than it looks, since
"[SCTP_UNKNOWN] = 2" expands into "[0xffff] = 2" !
This patch replaces it with switch() statement.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: linux-sctp@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a small chance that tunnel_free() is called before tunnel->del_work scheduled
resulting in a zero pointer dereference.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The size of the MAC register dump used to be the size specified by the
reg property in the device tree. Userland has no good way of finding
out that size, and it was not specified consistently for each MAC type,
so ethtool would end up printing junk at the end of the register dump
if the device tree didn't match the size it assumed.
Using the new version numbers indicates unambiguously that the size of
the MAC register dump is dependent only on the MAC type.
Fixes: 5369c71f7ca2 ("net/ibm/emac: fix size of emac dump memory areas")
Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Karl Heiss says:
====================
sctp: Fix SCTP deadlock
These patches fix a deadlock during accept() of an SCTP connection.
The first patch fixes whitespace issues.
The second patch actually fixes the deadlock race.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A case can occur when sctp_accept() is called by the user during
a heartbeat timeout event after the 4-way handshake. Since
sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the
bh_sock_lock in sctp_generate_heartbeat_event() will be taken with
the listening socket but released with the new association socket.
The result is a deadlock on any future attempts to take the listening
socket lock.
Note that this race can occur with other SCTP timeouts that take
the bh_lock_sock() in the event sctp_accept() is called.
BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0]
...
RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30
RSP: 0018:ffff880028323b20 EFLAGS: 00000206
RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48
RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000
R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0
R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225
FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0)
Stack:
ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000
<d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00
<d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8
Call Trace:
<IRQ>
[<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp]
[<ffffffff8148c559>] ? nf_iterate+0x69/0xb0
[<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
[<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120
[<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
[<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0
[<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0
[<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440
[<ffffffff81497255>] ? ip_rcv+0x275/0x350
[<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750
...
With lockdep debugging:
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
CslRx/12087 is trying to release lock (slock-AF_INET) at:
[<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp]
but there are no more locks to release!
other info that might help us debug this:
2 locks held by CslRx/12087:
#0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0
#1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp]
Ensure the socket taken is also the same one that is released by
saving a copy of the socket before entering the timeout event
critical section.
Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix indentation in sctp_generate_heartbeat_event.
Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's possible that while we are waiting for the spinlock, another
entity (that owns the spinlock) has shut down the admin queue.
If we then attempt to use the queue, we will panic.
Add a check for this condition on the receive side. This matches
an existing check on the send queue side.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously to this patch, the hardware was removing
VLAN tags from the inner header of VXLAN packets. The
hardware configuration can be changed to leave the
packet alone since that is what the linux stack
expects for this type of VLAN in VXLAN packet.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in
vmlinux.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If omap4_keypad_parse_dt() fails we returned the error code but we
missed releasing keypad_data.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sanitizing the e820 map may produce extra E820 entries which would result in
the topmost E820 entries being removed. The removed entries would typically
include the top E820 usable RAM region and thus result in the domain having
signicantly less RAM available to it.
Fix by allowing sanitize_e820_map to use the full size of the allocated E820
array.
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile bugfix from Chris Metcalf:
"This fixes a bug in 'make allmodconfig'"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: fix build failure
|
|
When building with allmodconfig the build was failing with the error:
arch/tile/kernel/usb.c:70:1: warning: data definition has no type or storage class [enabled by default]
arch/tile/kernel/usb.c:70:1: error: type defaults to 'int' in declaration of 'arch_initcall' [-Werror=implicit-int]
arch/tile/kernel/usb.c:70:1: warning: parameter names (without types) in function declaration [enabled by default]
arch/tile/kernel/usb.c:63:19: warning: 'tilegx_usb_init' defined but not used [-Wunused-function]
Include linux/module.h to resolve the build failure.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
|
|
Otherwise a FRMR completion can cause a touch-after-free crash.
In xprt_rdma_destroy(), call rpcrdma_buffer_destroy() only after calling
rpcrdma_ep_destroy().
In rpcrdma_ep_destroy(), disconnect the cm_id first which should flush the
qp, then drain the cqs, then destroy the qp, and finally destroy the cqs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A previous commit resets the Context Status Buffer (CSB) read pointer in
ring init
commit c0a03a2e4c4e ("drm/i915: Reset CSB read pointer in ring init")
This is generally correct, but this pointer is not reset after
suspend/resume in some platforms (cht). In this case, the driver should
read the register value instead of resetting the sw read counter to 0.
Otherwise we process old events, leading to unwanted pre-emptions or
something worse.
But in other platforms (bdw) and also during GPU reset or power up, the
CSBWP is reset to 0x7 (an invalid number), and in this case the read
pointer should be set to 5 (the interrupt code will increment this
counter one more time, and will start reading from CSB[0]).
v2: When the CSB registers are reset, the read pointer needs to be set
to 5, otherwise the first write (CSB[0]) won't be read (Mika).
Replace magic numbers with GEN8_CSB_ENTRIES (6) and GEN8_CSB_PTR_MASK
(0x07).
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Lei Shen <lei.shen@intel.com>
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently there is a number of issues preventing PVHVM Xen guests from
doing successful kexec/kdump:
- Bound event channels.
- Registered vcpu_info.
- PIRQ/emuirq mappings.
- shared_info frame after XENMAPSPACE_shared_info operation.
- Active grant mappings.
Basically, newly booted kernel stumbles upon already set up Xen
interfaces and there is no way to reestablish them. In Xen-4.7 a new
feature called 'soft reset' is coming. A guest performing kexec/kdump
operation is supposed to call SCHEDOP_shutdown hypercall with
SHUTDOWN_soft_reset reason before jumping to new kernel. Hypervisor
(with some help from toolstack) will do full domain cleanup (but
keeping its memory and vCPU contexts intact) returning the guest to
the state it had when it was first booted and thus allowing it to
start over.
Doing SHUTDOWN_soft_reset on Xen hypervisors which don't support it is
probably OK as by default all unknown shutdown reasons cause domain
destroy with a message in toolstack log: 'Unknown shutdown reason code
5. Destroying domain.' which gives a clue to what the problem is and
eliminates false expectations.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
For PV guests these registers are set up by hypervisor and thus
should not be written by the guest. The comment in xen_write_msr_safe()
says so but we still write the MSRs, causing the hypervisor to
print a warning.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
HYPERVISOR_memory_op() is defined to return an "int" value. This is
wrong, as the Xen hypervisor will return "long".
The sub-function XENMEM_maximum_reservation returns the maximum
number of pages for the current domain. An int will overflow for a
domain configured with 8TB of memory or more.
Correct this by using the correct type.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
system MSR"
Shifting pvclock_vcpu_time_info.system_time on write to KVM system time
MSR is a change of ABI. Probably only 2.6.16 based SLES 10 breaks due
to its custom enhancements to kvmclock, but KVM never declared the MSR
only for one-shot initialization. (Doc says that only one write is
needed.)
This reverts commit b7e60c5aedd2b63f16ef06fde4f81ca032211bc5.
And adds a note to the definition of PVCLOCK_COUNTS_FROM_ZERO.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If I2C is built as module, the iTCO watchdog driver must be built as module
as well. I2C_I801 must only be selected if I2C is configured.
This fixes the following build errors, seen if I2C=m and ITCO_WDT=y.
i2c-i801.c:(.text+0x2bf055): undefined reference to `i2c_del_adapter'
i2c-i801.c:(.text+0x2c13e0): undefined reference to `i2c_add_adapter'
i2c-i801.c:(.text+0x2c17bd): undefined reference to `i2c_new_device'
Fixes: 2a7a0e9bf7b3 ("watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint")
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Currently poweroff/halt results in a reboot on the Raspberry Pi.
The firmware uses the RSTS register to know which partiton to
boot from. The partiton value is spread into bits
0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by
the firmware to indicate halt.
The firmware made this change in 19 Aug 2013 and was matched
by the downstream commit:
Changes for new NOOBS multi partition booting from gsh
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
These platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
initialized.
In case something goes wrong with power well initialization we were calling
intel_prepare_ddi during boot while encoder list isnt't initilized.
[ 9.618747] i915 0000:00:02.0: Invalid ROM contents
[ 9.631446] [drm] failed to find VBIOS tables
[ 9.720036] BUG: unable to handle kernel NULL pointer dereference at 00000000
00000058
[ 9.721986] IP: [<ffffffffa014eb72>] ddi_get_encoder_port+0x82/0x190 [i915]
[ 9.723736] PGD 0
[ 9.724286] Oops: 0000 [#1] PREEMPT SMP
[ 9.725386] Modules linked in: intel_powerclamp snd_hda_intel(+) coretemp crc
32c_intel snd_hda_codec snd_hda_core serio_raw snd_pcm snd_timer i915(+) parport
_pc parport pinctrl_sunrisepoint pinctrl_intel nfsd nfs_acl
[ 9.730635] CPU: 0 PID: 497 Comm: systemd-udevd Not tainted 4.3.0-rc2-eywa-10
967-g72de2cfd-dirty #2
[ 9.732785] Hardware name: Intel Corporation Cannonlake Client platform/Skyla
ke DT DDR4 RVP8, BIOS CNLSE2R1.R00.X021.B00.1508040310 08/04/2015
[ 9.735785] task: ffff88008a704700 ti: ffff88016a1ac000 task.ti: ffff88016a1a
c000
[ 9.737584] RIP: 0010:[<ffffffffa014eb72>] [<ffffffffa014eb72>] ddi_get_enco
der_port+0x82/0x190 [i915]
[ 9.739934] RSP: 0000:ffff88016a1af710 EFLAGS: 00010296
[ 9.741184] RAX: 000000000000004e RBX: ffff88008a9edc98 RCX: 0000000000000001
[ 9.742934] RDX: 000000000000004e RSI: ffffffff81fc1e82 RDI: 00000000ffffffff
[ 9.744634] RBP: ffff88016a1af730 R08: 0000000000000000 R09: 0000000000000578
[ 9.746333] R10: 0000000000001065 R11: 0000000000000578 R12: fffffffffffffff8
[ 9.748033] R13: ffff88016a1af7a8 R14: ffff88016a1af794 R15: 0000000000000000
[ 9.749733] FS: 00007eff2e1e07c0(0000) GS:ffff88016fc00000(0000) knlGS:00000
00000000000
[ 9.751683] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.753083] CR2: 0000000000000058 CR3: 000000016922b000 CR4: 00000000003406f0
[ 9.754782] Stack:
[ 9.755332] ffff88008a9edc98 ffff88008a9ed800 ffffffffa01d07b0 00000000fffb9
09e
[ 9.757232] ffff88016a1af7d8 ffffffffa0154ea7 0000000000000246 ffff88016a370
080
[ 9.759182] ffff88016a370080 ffff88008a9ed800 0000000000000246 ffff88008a9ed
c98
[ 9.761132] Call Trace:
[ 9.761782] [<ffffffffa0154ea7>] intel_prepare_ddi+0x67/0x860 [i915]
[ 9.763332] [<ffffffff81a56996>] ? _raw_spin_unlock_irqrestore+0x26/0x40
[ 9.765031] [<ffffffffa00fad01>] ? gen9_read32+0x141/0x360 [i915]
[ 9.766531] [<ffffffffa00b43e1>] skl_set_power_well+0x431/0xa80 [i915]
[ 9.768181] [<ffffffffa00b4a63>] skl_power_well_enable+0x13/0x20 [i915]
[ 9.769781] [<ffffffffa00b2188>] intel_power_well_enable+0x28/0x50 [i915]
[ 9.771481] [<ffffffffa00b4d52>] intel_display_power_get+0x92/0xc0 [i915]
[ 9.773180] [<ffffffffa00b4fcb>] intel_display_set_init_power+0x3b/0x40 [i91
5]
[ 9.774980] [<ffffffffa00b5170>] intel_power_domains_init_hw+0x120/0x520 [i9
15]
[ 9.776780] [<ffffffffa0194c61>] i915_driver_load+0xb21/0xf40 [i915]
So let's protect this case.
My first attempt was to remove the intel_prepare_ddi, but Daniel had pointed out
this is really needed to restore those registers values. And Imre pointed out
that this case was without the flag protection and this was actually where things
were going bad. So I've just checked and this indeed solves my issue.
The regressing intel_prepare_ddi call was added in
commit 1d2b9526a790d55b7ae870934a74937081f62de2
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Fri Mar 6 18:50:53 2015 +0000
drm/i915/skl: Restore the DDI translation tables when enabling PW1
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[Jani: regression reference]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Make sure the compiler does not modify arguments of syscall functions.
This can happen if the compiler generates a tailcall to another
function. For example, without asmlinkage_protect sys_openat is compiled
into this function:
sys_openat:
clr.l %d0
move.w 18(%sp),%d0
move.l %d0,16(%sp)
jbra do_sys_open
Note how the fourth argument is modified in place, modifying the register
%d4 that gets restored from this stack slot when the function returns to
user-space. The caller may expect the register to be unmodified across
system calls.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
|
|
$ ./membarrier_test
membarrier MEMBARRIER_CMD_QUERY syscall available.
membarrier: MEMBARRIER_CMD_SHARED success.
membarrier: tests done!
$
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
|
|
$ ./userfaultfd 10 99
nr_pages: 2560, nr_pages_per_cpu: 2560
bounces: 98, mode: racing, userfaults: 1121
bounces: 97, mode: rnd, userfaults: 977
bounces: 96, mode:, userfaults: 1119
bounces: 95, mode: rnd racing ver poll, userfaults: 1040
bounces: 94, mode: racing ver poll, userfaults: 1022
bounces: 93, mode: rnd ver poll, userfaults: 946
bounces: 92, mode: ver poll, userfaults: 1115
bounces: 91, mode: rnd racing poll, userfaults: 977
bounces: 90, mode: racing poll, userfaults: 899
bounces: 89, mode: rnd poll, userfaults: 881
bounces: 88, mode: poll, userfaults: 1069
bounces: 87, mode: rnd racing ver, userfaults: 1114
bounces: 86, mode: racing ver, userfaults: 1109
bounces: 85, mode: rnd ver, userfaults: 1165
bounces: 84, mode: ver, userfaults: 1107
bounces: 83, mode: rnd racing, userfaults: 1134
bounces: 82, mode: racing, userfaults: 1105
bounces: 81, mode: rnd, userfaults: 1323
bounces: 80, mode:, userfaults: 1103
bounces: 79, mode: rnd racing ver poll, userfaults: 909
bounces: 78, mode: racing ver poll, userfaults: 1095
bounces: 77, mode: rnd ver poll, userfaults: 951
bounces: 76, mode: ver poll, userfaults: 1099
bounces: 75, mode: rnd racing poll, userfaults: 1035
bounces: 74, mode: racing poll, userfaults: 1097
bounces: 73, mode: rnd poll, userfaults: 1159
bounces: 72, mode: poll, userfaults: 1042
bounces: 71, mode: rnd racing ver, userfaults: 848
bounces: 70, mode: racing ver, userfaults: 1093
bounces: 69, mode: rnd ver, userfaults: 892
bounces: 68, mode: ver, userfaults: 1091
bounces: 67, mode: rnd racing, userfaults: 1219
bounces: 66, mode: racing, userfaults: 1089
bounces: 65, mode: rnd, userfaults: 988
bounces: 64, mode:, userfaults: 1087
bounces: 63, mode: rnd racing ver poll, userfaults: 882
bounces: 62, mode: racing ver poll, userfaults: 984
bounces: 61, mode: rnd ver poll, userfaults: 701
bounces: 60, mode: ver poll, userfaults: 1071
bounces: 59, mode: rnd racing poll, userfaults: 1137
bounces: 58, mode: racing poll, userfaults: 1032
bounces: 57, mode: rnd poll, userfaults: 911
bounces: 56, mode: poll, userfaults: 1079
bounces: 55, mode: rnd racing ver, userfaults: 1106
bounces: 54, mode: racing ver, userfaults: 1077
bounces: 53, mode: rnd ver, userfaults: 886
bounces: 52, mode: ver, userfaults: 1075
bounces: 51, mode: rnd racing, userfaults: 1101
bounces: 50, mode: racing, userfaults: 1073
bounces: 49, mode: rnd, userfaults: 1070
bounces: 48, mode:, userfaults: 1071
bounces: 47, mode: rnd racing ver poll, userfaults: 1077
bounces: 46, mode: racing ver poll, userfaults: 910
bounces: 45, mode: rnd ver poll, userfaults: 1063
bounces: 44, mode: ver poll, userfaults: 1028
bounces: 43, mode: rnd racing poll, userfaults: 1043
bounces: 42, mode: racing poll, userfaults: 1065
bounces: 41, mode: rnd poll, userfaults: 912
bounces: 40, mode: poll, userfaults: 1063
bounces: 39, mode: rnd racing ver, userfaults: 880
bounces: 38, mode: racing ver, userfaults: 1061
bounces: 37, mode: rnd ver, userfaults: 1144
bounces: 36, mode: ver, userfaults: 1059
bounces: 35, mode: rnd racing, userfaults: 967
bounces: 34, mode: racing, userfaults: 1057
bounces: 33, mode: rnd, userfaults: 1076
bounces: 32, mode:, userfaults: 1055
bounces: 31, mode: rnd racing ver poll, userfaults: 997
bounces: 30, mode: racing ver poll, userfaults: 1053
bounces: 29, mode: rnd ver poll, userfaults: 968
bounces: 28, mode: ver poll, userfaults: 978
bounces: 27, mode: rnd racing poll, userfaults: 1008
bounces: 26, mode: racing poll, userfaults: 1049
bounces: 25, mode: rnd poll, userfaults: 900
bounces: 24, mode: poll, userfaults: 1047
bounces: 23, mode: rnd racing ver, userfaults: 988
bounces: 22, mode: racing ver, userfaults: 1045
bounces: 21, mode: rnd ver, userfaults: 1027
bounces: 20, mode: ver, userfaults: 1043
bounces: 19, mode: rnd racing, userfaults: 1017
bounces: 18, mode: racing, userfaults: 1041
bounces: 17, mode: rnd, userfaults: 979
bounces: 16, mode:, userfaults: 1039
bounces: 15, mode: rnd racing ver poll, userfaults: 1134
bounces: 14, mode: racing ver poll, userfaults: 1037
bounces: 13, mode: rnd ver poll, userfaults: 1046
bounces: 12, mode: ver poll, userfaults: 1035
bounces: 11, mode: rnd racing poll, userfaults: 1060
bounces: 10, mode: racing poll, userfaults: 1033
bounces: 9, mode: rnd poll, userfaults: 1003
bounces: 8, mode: poll, userfaults: 929
bounces: 7, mode: rnd racing ver, userfaults: 964
bounces: 6, mode: racing ver, userfaults: 1029
bounces: 5, mode: rnd ver, userfaults: 1053
bounces: 4, mode: ver, userfaults: 1027
bounces: 3, mode: rnd racing, userfaults: 863
bounces: 2, mode: racing, userfaults: 1025
bounces: 1, mode: rnd, userfaults: 1043
bounces: 0, mode:, userfaults: 950
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent
Pull RCU fixes from Paul E. McKenney, for two regressions
introduced in this merge window:
- Fix bug with recent GCCs.
- Fix false positive lockdep splat.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If parkbd_allocate_serio() fails to allocate memory we are releasing the
parport but we missed unregistering the device. As a result this device
with exclusive access to that parport remains registered. And no other
device will be able to use that parport even though this driver has
failed to load.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
it was broken by 35d5d20efad8a04c8c002c7f31241dff973977a6
"mtd: mxc_nand: cleanup copy_spare function"
else we get the following error :
[ 22.709507] ubi0: attaching mtd3
[ 23.613470] ubi0: scanning is finished
[ 23.617278] ubi0: empty MTD device detected
[ 23.623219] Unhandled fault: imprecise external abort (0x1c06) at 0x9e62f0ec
[ 23.630291] pgd = 9df80000
[ 23.633005] [9e62f0ec] *pgd=8e60041e(bad)
[ 23.637064] Internal error: : 1c06 [#1] SMP ARM
[ 23.641605] Modules linked in:
[ 23.644687] CPU: 0 PID: 99 Comm: ubiattach Not tainted 4.2.0-dirty #22
[ 23.651222] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 23.657322] task: 9e687300 ti: 9dcfc000 task.ti: 9dcfc000
[ 23.662744] PC is at memcpy16_toio+0x4c/0x74
[ 23.667026] LR is at mxc_nand_command+0x484/0x640
[ 23.671739] pc : [<803f9c08>] lr : [<803faeb0>] psr: 60000013
[ 23.671739] sp : 9dcfdb10 ip : 9e62f0ea fp : 9dcfdb1c
[ 23.683222] r10: a09c1000 r9 : 0000001a r8 : ffffffff
[ 23.688453] r7 : ffffffff r6 : 9e674810 r5 : 9e674810 r4 : 000000b6
[ 23.694985] r3 : a09c16a4 r2 : a09c16a4 r1 : a09c16a4 r0 : 0000ffff
[ 23.701521] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 23.708662] Control: 10c5387d Table: 8df80019 DAC: 00000015
[ 23.714413] Process ubiattach (pid: 99, stack limit = 0x9dcfc210)
[ 23.720514] Stack: (0x9dcfdb10 to 0x9dcfe000)
[ 23.724881] db00: 9dcfdb6c 9dcfdb20 803faeb0 803f9bc8
[ 23.733069] db20: 803f227c 803f9b74 ffffffff 9e674810 9e674810 9e674810 00000040 9e62f010
[ 23.741255] db40: 803faa2c 9e674b40 9e674810 803faa2c 00000400 803faa2c 00000000 9df42800
[ 23.749441] db60: 9dcfdb9c 9dcfdb70 803f2024 803faa38 9e4201cc 00000000 803f0a78 9e674b40
[ 23.757627] db80: 803f1f80 9e674810 00000400 00000400 9dcfdc14 9dcfdba0 803f3bd8 803f1f8c
[ 23.765814] dba0: 9e4201cc 00000000 00000580 00000000 00000000 800718c0 0000007f 00001000
[ 23.774000] dbc0: 9df42800 000000e0 00000000 00000000 9e4201cc 00000000 00000000 00000000
[ 23.782186] dbe0: 00000580 00000580 00000000 9e674810 9dcfdc20 9dcfdce8 9df42800 00580000
[ 23.790372] dc00: 00000000 00000400 9dcfdc6c 9dcfdc18 803f3f94 803f39a4 9dcfdc20 00000000
[ 23.798558] dc20: 00000000 00000400 00000000 00000000 00000000 00000000 9df42800 00000000
[ 23.806744] dc40: 9dcfdd0c 00580000 00000000 00000400 00000000 9df42800 9dee1000 9d802000
[ 23.814930] dc60: 9dcfdc94 9dcfdc70 803eb63c 803f3f38 00000400 9dcfdce8 9df42800 dead4ead
[ 23.823116] dc80: 803eb5f4 00000000 9dcfdcc4 9dcfdc98 803e82ac 803eb600 00000400 9dcfdce8
[ 23.831301] dca0: 9df42800 00000400 9dee0000 00000000 00000400 00000000 9dcfdd1c 9dcfdcc8
[ 23.839488] dcc0: 80406048 803e8230 00000400 9dcfdce8 9df42800 9dcfdc78 00000008 00000000
[ 23.847673] dce0: 00000000 00000000 00000000 00000004 00000000 9df42800 9dee0000 00000000
[ 23.855859] dd00: 9d802030 00000000 9dc8b214 9d802000 9dcfdd44 9dcfdd20 804066cc 80405f50
[ 23.864047] dd20: 00000400 9dc8b200 9d802030 9df42800 9dee0000 9dc8b200 9dcfdd84 9dcfdd48
[ 23.872233] dd40: 8040a544 804065ac 9e401c80 000080d0 9dcfdd84 00000001 800fc828 9df42400
[ 23.880418] dd60: 00000000 00000080 9dc8b200 9dc8b200 9dc8b200 9dee0000 9dcfdddc 9dcfdd88
[ 23.888605] dd80: 803fb560 8040a440 9dcfddc4 9dcfdd98 800f1428 9dee1000 a0acf000 00000000
[ 23.896792] dda0: 00000000 ffffffff 00000006 00000000 9dee0000 9dee0000 00005600 00000080
[ 23.904979] ddc0: 9dc8b200 a0acf000 9dc8b200 8112514c 9dcfde24 9dcfdde0 803fc08c 803fb4f0
[ 23.913165] dde0: 9e401c80 00000013 9dcfde04 9dcfddf8 8006bbf8 8006ba00 9dcfde24 00000000
[ 23.921351] de00: 9dee0000 00000065 9dee0000 00000001 9dc8b200 8112514c 9dcfde84 9dcfde28
[ 23.929538] de20: 8040afa0 803fb948 ffffffff 00000000 9dc8b214 9dcfde40 800f1428 800f11dc
[ 23.937724] de40: 9dc8b21c 9dc8b20c 9dc8b204 9dee1000 9dc8b214 8069bb60 fffff000 fffff000
[ 23.945911] de60: 9e7b5400 00000000 9dee0000 9dee1000 00001000 9e7b5400 9dcfdecc 9dcfde88
[ 23.954097] de80: 803ff1bc 8040a630 9dcfdea4 9dcfde98 00000800 00000800 9dcfdecc 9dcfdea8
[ 23.962284] dea0: 803e8f6c 00000000 7e87ab70 9e7b5400 80113e30 00000003 9dcfc000 00000000
[ 23.970470] dec0: 9dcfdf04 9dcfded0 804008cc 803feb98 ffffffff 00000003 00000000 00000000
[ 23.978656] dee0: 00000000 00000000 9e7cb000 9dc193e0 7e87ab70 9dd92140 9dcfdf7c 9dcfdf08
[ 23.986842] df00: 80113b5c 8040080c 800fbed8 8006bbf0 9e7cb000 00000003 9e7cb000 9dd92140
[ 23.995029] df20: 9dc193e0 9dd92148 9dcfdf4c 9dcfdf38 8011022c 800fbe78 8000f9cc 9e687300
[ 24.003216] df40: 9dcfdf6c 9dcfdf50 8011f798 8007ffe8 7e87ab70 9dd92140 00000003 9dd92140
[ 24.011402] df60: 40186f40 7e87ab70 9dcfc000 00000000 9dcfdfa4 9dcfdf80 80113e30 8011373c
[ 24.019588] df80: 7e87ab70 7e87ab70 7e87aea9 00000036 8000fb84 9dcfc000 00000000 9dcfdfa8
[ 24.027775] dfa0: 8000f9a0 80113e00 7e87ab70 7e87ab70 00000003 40186f40 7e87ab70 00000000
[ 24.035962] dfc0: 7e87ab70 7e87ab70 7e87aea9 00000036 00000000 00000000 76fd1f70 00000000
[ 24.044148] dfe0: 76f80f8c 7e87ab28 00009810 76f80fc4 60000010 00000003 00000000 00000000
[ 24.052328] Backtrace:
[ 24.054806] [<803f9bbc>] (memcpy16_toio) from [<803faeb0>] (mxc_nand_command+0x484/0x640)
[ 24.062996] [<803faa2c>] (mxc_nand_command) from [<803f2024>] (nand_write_page+0xa4/0x154)
[ 24.071264] r10:9df42800 r9:00000000 r8:803faa2c r7:00000400 r6:803faa2c r5:9e674810
[ 24.079180] r4:9e674b40
[ 24.081738] [<803f1f80>] (nand_write_page) from [<803f3bd8>] (nand_do_write_ops+0x240/0x444)
[ 24.090180] r8:00000400 r7:00000400 r6:9e674810 r5:803f1f80 r4:9e674b40
[ 24.096970] [<803f3998>] (nand_do_write_ops) from [<803f3f94>] (nand_write+0x68/0x88)
[ 24.104804] r10:00000400 r9:00000000 r8:00580000 r7:9df42800 r6:9dcfdce8 r5:9dcfdc20
[ 24.112719] r4:9e674810
[ 24.115287] [<803f3f2c>] (nand_write) from [<803eb63c>] (part_write+0x48/0x50)
[ 24.122514] r10:9d802000 r9:9dee1000 r8:9df42800 r7:00000000 r6:00000400 r5:00000000
[ 24.130429] r4:00580000
[ 24.132989] [<803eb5f4>] (part_write) from [<803e82ac>] (mtd_write+0x88/0xa0)
[ 24.140129] r5:00000000 r4:803eb5f4
[ 24.143748] [<803e8224>] (mtd_write) from [<80406048>] (ubi_io_write+0x104/0x65c)
[ 24.151235] r7:00000000 r6:00000400 r5:00000000 r4:9dee0000
[ 24.156968] [<80405f44>] (ubi_io_write) from [<804066cc>] (ubi_io_write_ec_hdr+0x12c/0x190)
[ 24.165323] r10:9d802000 r9:9dc8b214 r8:00000000 r7:9d802030 r6:00000000 r5:9dee0000
[ 24.173239] r4:9df42800
[ 24.175798] [<804065a0>] (ubi_io_write_ec_hdr) from [<8040a544>] (ubi_early_get_peb+0x110/0x1f0)
[ 24.184587] r6:9dc8b200 r5:9dee0000 r4:9df42800
[ 24.189262] [<8040a434>] (ubi_early_get_peb) from [<803fb560>] (create_vtbl+0x7c/0x238)
[ 24.197271] r10:9dee0000 r9:9dc8b200 r8:9dc8b200 r7:9dc8b200 r6:00000080 r5:00000000
[ 24.205187] r4:9df42400
[ 24.207746] [<803fb4e4>] (create_vtbl) from [<803fc08c>] (ubi_read_volume_table+0x750/0xa64)
[ 24.216187] r10:8112514c r9:9dc8b200 r8:a0acf000 r7:9dc8b200 r6:00000080 r5:00005600
[ 24.224103] r4:9dee0000
[ 24.226662] [<803fb93c>] (ubi_read_volume_table) from [<8040afa0>] (ubi_attach+0x97c/0x152c)
[ 24.235103] r10:8112514c r9:9dc8b200 r8:00000001 r7:9dee0000 r6:00000065 r5:9dee0000
[ 24.243018] r4:00000000
[ 24.245579] [<8040a624>] (ubi_attach) from [<803ff1bc>] (ubi_attach_mtd_dev+0x630/0xbac)
[ 24.253673] r10:9e7b5400 r9:00001000 r8:9dee1000 r7:9dee0000 r6:00000000 r5:9e7b5400
[ 24.261588] r4:fffff000
[ 24.264148] [<803feb8c>] (ubi_attach_mtd_dev) from [<804008cc>] (ctrl_cdev_ioctl+0xcc/0x1cc)
[ 24.272589] r10:00000000 r9:9dcfc000 r8:00000003 r7:80113e30 r6:9e7b5400 r5:7e87ab70
[ 24.280505] r4:00000000
[ 24.283070] [<80400800>] (ctrl_cdev_ioctl) from [<80113b5c>] (do_vfs_ioctl+0x42c/0x6c4)
[ 24.291077] r6:9dd92140 r5:7e87ab70 r4:9dc193e0
[ 24.295753] [<80113730>] (do_vfs_ioctl) from [<80113e30>] (SyS_ioctl+0x3c/0x64)
[ 24.303066] r10:00000000 r9:9dcfc000 r8:7e87ab70 r7:40186f40 r6:9dd92140 r5:00000003
[ 24.310981] r4:9dd92140
[ 24.313549] [<80113df4>] (SyS_ioctl) from [<8000f9a0>] (ret_fast_syscall+0x0/0x54)
[ 24.321123] r9:9dcfc000 r8:8000fb84 r7:00000036 r6:7e87aea9 r5:7e87ab70 r4:7e87ab70
[ 24.328957] Code: e1c300b0 e1510002 e1a03001 1afffff9 (e89da800)
[ 24.335066] ---[ end trace ab1cb17887f21bbb ]---
[ 24.340249] Unhandled fault: imprecise external abort (0x1c06) at 0x7ee8bcf0
[ 24.347310] pgd = 9df3c000
[ 24.350023] [7ee8bcf0] *pgd=8dcbf831, *pte=8eb3334f, *ppte=8eb3383f
Segmentation fault
Fixes: 35d5d20efad8 ("mtd: mxc_nand: cleanup copy_spare function")
Signed-off-by: Eric Bénard <eric@eukrea.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Pull MIPS fixes from Ralf Baechle:
- Properly setup irq handling for ATH79 platforms
- Fix bootmem mapstart calculation for contiguous maps
- Handle little endian and older CPUs correct in BPF
- Fix console for Fulong 2E systems
- Handle FTLB correctly on R6 CPUs
- Fixes for CM, GIC and MAAR support code
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Initialise MAARs on secondary CPUs
MIPS: print MAAR configuration during boot
MIPS: mm: compile maar_init unconditionally
irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC.
irqchip: mips-gic: Convert CPU numbers to VP IDs.
MIPS: CM: Provide a function to map from CPU to VP ID.
MIPS: Fix FTLB detection for R6
MIPS: cpu-features: Add cpu_has_ftlb
MIPS: ATH79: Add irq chip ar7240-misc-intc
MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip
MIPS: BPF: Fix build on pre-R2 little endian CPUs
MIPS: BPF: Avoid unreachable code on little endian
MIPS: bootmem: Fix mapstart calculation for contiguous maps
MIPS: Fix console output for Fulong2e system
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Another pile of fixes for perf:
- Plug overflows and races in the core code
- Sanitize the flow of the perf syscall so we error out before
handling the more complex and hard to undo setups
- Improve and fix Broadwell and Skylake hardware support
- Revert a fix which broke what it tried to fix in perf tools
- A couple of smaller fixes in various places of perf tools"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix copying of /proc/kcore
perf intel-pt: Remove no_force_psb from documentation
perf probe: Use existing routine to look for a kernel module by dso->short_name
perf/x86: Change test_aperfmperf() and test_intel() to static
tools lib traceevent: Fix string handling in heterogeneous arch environments
perf record: Avoid infinite loop at buildid processing with no samples
perf: Fix races in computing the header sizes
perf: Fix u16 overflows
perf: Restructure perf syscall point of no return
perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask
perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake
perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific
perf tools: Bool functions shouldn't return -1
tools build: Add test for presence of __get_cpuid() gcc builtin
tools build: Add test for presence of numa_num_possible_cpus() in libnuma
Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum"
perf stat: Fix per-pkg event reporting bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single bug fix for the scheduler to prevent dequeueing of the idle
task when setting the cpus allowed mask"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix crash trying to dequeue/enqueue the idle thread
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single bugfix for lockdep to preserve the pinning counter when
rebuilding the lock stack"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix hlock->pin_count reset on lock stack rebuilds
|
