| Age | Commit message (Collapse) | Author |
|---|
|
This patch fixes the ethtool stats for PTP frames; previous
version does not take care about some message types: i.e.
announce, management and signaling. It also provided a
broken statistic in case of "No PTP message received".
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to bad management of the descriptors, when use ptp4l,
kernel panics as shown below:
-----------------------------------------------------------
Unable to handle kernel NULL pointer dereference at virtual
address 000001ac
...
Internal error: Oops: 17 [#1] SMP ARM
...
Hardware name: STi SoC with Flattened Device Tree
task: c0c05e80 task.stack: c0c00000
PC is at dwmac4_wrback_get_tx_timestamp_status+0x0/0xc
LR is at stmmac_tx_clean+0x2f8/0x4d4
-----------------------------------------------------------
In case of GMAC4 the extended descriptor pointers were
used for getting the timestamp. These are NULL for this HW,
and the normal ones must be used.
The PTP also had problems on this chip due to the bad
register management and issues on the algo adopted to
setup the PTP and getting the timestamp values from the
descriptors.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to update this file by using BIT macros, removing
not used defines and fixes some typos.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 24cf3af3fed5 ("igmp: call ip_mc_clear_src..."), we forgot to remove
igmpv3_clear_delrec() in ip_mc_down(), which also called ip_mc_clear_src().
This make us clear all IGMPv3 source filter info after NETDEV_DOWN.
Move igmpv3_clear_delrec() to ip_mc_destroy_dev() and then no need
ip_mc_clear_src() in ip_mc_destroy_dev().
On the other hand, we should restore back instead of free all source filter
info in igmpv3_del_delrec(). Or we will not able to restore IGMPv3 source
filter info after NETDEV_UP and NETDEV_POST_TYPE_CHANGE.
Fixes: 24cf3af3fed5 ("igmp: call ip_mc_clear_src() only when ...")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes
sun4i-drm fixes for 4.9
A few patches to fix our error handling and our panel / bridge calls.
* tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Propagate error to the caller
drm/sun4i: Fix error handling
drm/sun4i: rgb: Remove the bridge enable/disable functions
drm/sun4i: rgb: Enable panel after controller
|
|
Remove IS_ERR check from caching code as the function being called does
not actually return error pointers.
Fixes: f19bd643dbde: "IB/hfi1: Prevent NULL pointer deferences in caching code"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Increase the size of the buffer that is used to construct per-VL
and per-SDMA counter names.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When processing ECN via the prescan_rxq path, some fields in the packet
structure are passed uninitialized. This can potentially
cause NULL pointer exceptions during ECN handling.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Set the status code BAD_L2 when unsupported type of packet
is received and dropped.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Validate the rcvhdrcnt module parameter in a single function at module
load time. This allows proper error reporting.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Krzysztof Blaszkowski <krzysztof.blaszkowski@intel.com>
Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The new s_rnr_timeout was not properly being set and the code was
incorrectly setting a different timer.
Found by code inspection.
Cc: <stable@vger.kernel.org> # 4.7.x
Fixes: 08279d5c9424 ("staging/rdma/hfi1: use new RNR timer")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The lock is an unused vestige from qib. Remove it.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
hfi1_pcie_ddinit takes the PCI device id as an argument but never
uses it. Clean it up.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A few snoop related variables were missed in the snoop/capture removal
to get out of staging. Go back and clean those up too.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In the function hfi1_create_ctxts the array "dd->rcd" is allocated and
then populated with allocated resources in a loop. Previously, if
error happened during the loop, only resource allocated in the current
iteration would be freed. The array itself would then be freed, leaving
the resources that were allocated in previous iterations and referenced
by the array elements in limbo.
This patch makes sure all allocated resources are freed before freeing
the array "dd->rcd". Also the resource allocation now takes account of
the numa node the device is attached to.
Reviewed-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Clean up device type checking.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Krzysztof Blaszkowski <krzysztof.blaszkowski@intel.com>
Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch fixes an Oops on device unbind, when the device is used
by a PSM user process. PSM processes access device resources which
are freed on device removal. Similar protection exists in uverbs
in ib_core for Verbs clients, but PSM doesn't use ib_uverbs hence
a separate protection is required for PSM clients.
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Prevent setting up integrity check flags when module is loaded
with NO_INTEGRITY capability.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The IRQ affinity entry is not needed after the irq notifier patch has been
added to the hfi1 driver.
The irq affinity settings for SDMA engine should be set using the standard
/proc/irq/<N>/ interface.
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The initial code for rdmavt carried with it a restriction that was a
vestige from the qib driver, that to dma map a page it had to be less
than a page size. This is not the case on modern hardware, both qib and
hfi1 will be just fine with unaligned map requests.
This fixes a 4.8 regression where by an IPoIB transfer of > PAGE_SIZE
will hang because the dma map page call always fails. This was
introduced after commit 5faba5469522 ("IB/ipoib: Report SG feature
regardless of HW UD CSUM capability") added the capability to use SG by
default. Rather than override this, the HW supports it, so allow SG.
Cc: Stable <stable@vger.kernel.org> # 4.8
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
1,cleanup description/comments
2,for FIJI & passthrough, force post when smc fw version below 22.15
3,for other cases, follow regular rules
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Left over from an earlier rev of the patch.
Acked-by: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Colin King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TSE PCS SGMII ethernet has an issue where switching speed doesn't work
caused by a faulty register macro offset. This fixes the issue.
Signed-off-by: Jia Jie Ho <ho.jia.jie@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Alexei discovered a race condition in modules failing to load that can
cause a ftrace check to trigger and disable ftrace.
This is because of the way modules are registered to ftrace. Their
functions are loaded in the ftrace function tables but set to
"disabled" since they are still in the process of being loaded by the
module. After the module is finished, it calls back into the ftrace
infrastructure to enable it.
Looking deeper into the locations that access all the functions in the
table, I found more locations that should ignore the disabled ones"
* tag 'trace-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Add more checks for FTRACE_FL_DISABLED in processing ip records
ftrace: Ignore FTRACE_FL_DISABLED while walking dyn_ftrace records
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fix from Tomi Valkeinen:
"Fix CLCD regression on Vexpress"
* tag 'fbdev-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: ARM CLCD: fix Vexpress regression
|
|
So Sebastian turned off the PIE for kernel builds but that was too late
- Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc
options with, say cc-disable-warning, fails:
gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
...
-Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp
/dev/null:1:0: error: code model kernel does not support PIC mode
because that returns an error and we can't disable the warning. For
example in this case:
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
which leads to gcc issuing all those warnings again.
So let's turn off PIE/PIC at the earliest possible moment, when we
declare KBUILD_CFLAGS so that cc-disable-warning picks it up too.
Also, we need the $(call cc-option ...) because -fno-PIE is supported
since gcc v3.4 and our lowest supported gcc version is 3.2 right now.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
fs_initcall is definitely too late to initialize DMA-debug hash tables,
because some drivers might get probed and use DMA mapping framework
already in core_initcall. Late initialization of DMA-debug results in
false warning about accessing memory, that was not allocated, like this
one:
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at lib/dma-debug.c:1104 check_unmap+0xa1c/0xe50
exynos-sysmmu 10a60000.sysmmu: DMA-API: device driver tries to free DMA memory it has not allocated [device
address=0x000000006ebd0000] [size=16384 bytes]
Modules linked in:
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc5-00028-g39dde3d-dirty #44
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0119dd4>] (unwind_backtrace) from [<c01122bc>] (show_stack+0x20/0x24)
[<c01122bc>] (show_stack) from [<c062714c>] (dump_stack+0x84/0xa0)
[<c062714c>] (dump_stack) from [<c0132560>] (__warn+0x14c/0x180)
[<c0132560>] (__warn) from [<c01325dc>] (warn_slowpath_fmt+0x48/0x50)
[<c01325dc>] (warn_slowpath_fmt) from [<c06814f8>] (check_unmap+0xa1c/0xe50)
[<c06814f8>] (check_unmap) from [<c06819c4>] (debug_dma_unmap_page+0x98/0xc8)
[<c06819c4>] (debug_dma_unmap_page) from [<c076c3e8>] (exynos_iommu_domain_free+0x158/0x380)
[<c076c3e8>] (exynos_iommu_domain_free) from [<c0764a30>] (iommu_domain_free+0x34/0x60)
[<c0764a30>] (iommu_domain_free) from [<c011f168>] (release_iommu_mapping+0x30/0xb8)
[<c011f168>] (release_iommu_mapping) from [<c011f23c>] (arm_iommu_release_mapping+0x4c/0x50)
[<c011f23c>] (arm_iommu_release_mapping) from [<c0b061ac>] (s5p_mfc_probe+0x640/0x80c)
[<c0b061ac>] (s5p_mfc_probe) from [<c07e6750>] (platform_drv_probe+0x70/0x148)
[<c07e6750>] (platform_drv_probe) from [<c07e25c0>] (driver_probe_device+0x12c/0x6b0)
[<c07e25c0>] (driver_probe_device) from [<c07e2c6c>] (__driver_attach+0x128/0x17c)
[<c07e2c6c>] (__driver_attach) from [<c07df74c>] (bus_for_each_dev+0x88/0xc8)
[<c07df74c>] (bus_for_each_dev) from [<c07e1b6c>] (driver_attach+0x34/0x58)
[<c07e1b6c>] (driver_attach) from [<c07e1350>] (bus_add_driver+0x18c/0x32c)
[<c07e1350>] (bus_add_driver) from [<c07e4198>] (driver_register+0x98/0x148)
[<c07e4198>] (driver_register) from [<c07e5cb0>] (__platform_driver_register+0x58/0x74)
[<c07e5cb0>] (__platform_driver_register) from [<c174cb30>] (s5p_mfc_driver_init+0x1c/0x20)
[<c174cb30>] (s5p_mfc_driver_init) from [<c0102690>] (do_one_initcall+0x64/0x258)
[<c0102690>] (do_one_initcall) from [<c17014c0>] (kernel_init_freeable+0x3d0/0x4d0)
[<c17014c0>] (kernel_init_freeable) from [<c116eeb4>] (kernel_init+0x18/0x134)
[<c116eeb4>] (kernel_init) from [<c010bbd8>] (ret_from_fork+0x14/0x3c)
---[ end trace dc54c54bd3581296 ]---
This patch moves initialization of DMA-debug to core_initcall. This is
safe from the initialization perspective. dma_debug_do_init() internally calls
debugfs functions and debugfs also gets initialised at core_initcall(), and
that is earlier than arch code in the link order, so it will get initialized
just before the DMA-debug.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
There is no .text.init sections.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Recent kernels have changed their behaviour to be more inconsistent
when handling printk continuations. With todays kernels, the output
looks sane on the console, but dmesg splits individual printk()s which
do not have the KERN_CONT prefix into separate lines.
Since the assembly code is not trivial to add the KERN_CONT, and we
ideally want to avoid using KERN_CONT (as multiple printk()s can race
between different threads), convert the assembly dumping the register
values to C code, and have the C code build the output a line at a
time before dumping to the console.
This avoids the KERN_CONT issue, and also avoids situations where the
output is intermixed with other console activity.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
for-linus
Sagi writes:
These are the relevant fixes for rc6
- fix possible crash in nvmet-rdma cm_handler from Bart
- fix possible memory leak in nvmet-rdma for connection failures
- fix possible use-after-free conditions in nvmet-rdma
- fix possible IO errors during reconnect stage from Christoph
- fix possible memory leak in nvme-rdma during IO queues connect
failures from Steve
|
|
Due to the cast from uint32_t to int64_t, a wrong next beacon timing is
calculated and effectively the beacon timer stops working. This is
especially bad for 802.11s mesh networks, because discovery breaks
without beacons.
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A-MSDU aggregation alters the QoS header after a frame has been
enqueued, so it needs to be ready before enqueue and not overwritten
again afterwards
Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The call to ieee80211_txq_enqueue overwrites the vif pointer with the
codel enqueue time, so setting it just before that call makes no sense.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The sequence number counter is used to derive the starting sequence
number. Since that counter is updated on tx dequeue, the A-MPDU flag
needs to be up to date at the tme of dequeue as well.
This patch prevents sending more A-MPDU frames after the session has
been terminated and also ensures that aggregation starts right after the
session has been established
Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some drivers (ath10k) report MCS 9 @ 20MHz, which
technically isn't defined. To get more meaningful value
than 0 out of this however, just extrapolate a bitrate
from ratio of MCS 7 and 9 in channels where it is allowed.
Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com>
[add a comment about it in the code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit c68df2e7be0c1238ea3c281fd744a204ef3b15a0.
__sta_info_recalc_tim turns into a no-op if local->ops->set_tim is not
set. This prevents the beacon TIM bit from being set for all drivers
that do not implement this op (almost all of them), thus thoroughly
essential AP mode powersave functionality.
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: c68df2e7be0c ("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a workaround for VHT-enabled STAs which break the spec
and have the VHT-MCS Rx map filled in with value 3 for all eight
spacial streams, an example is AR9462 in AP mode.
As per spec, in section 22.1.1 Introduction to the VHT PHY
A VHT STA shall support at least single spactial stream VHT-MCSs
0 to 7 (transmit and receive) in all supported channel widths.
Some devices in STA mode will get firmware assert when trying to
associate, examples are QCA9377 & QCA6174.
Packet example of broken VHT Cap IE of AR9462:
Tag: VHT Capabilities (IEEE Std 802.11ac/D3.1)
Tag Number: VHT Capabilities (IEEE Std 802.11ac/D3.1) (191)
Tag length: 12
VHT Capabilities Info: 0x00000000
VHT Supported MCS Set
Rx MCS Map: 0xffff
.... .... .... ..11 = Rx 1 SS: Not Supported (0x0003)
.... .... .... 11.. = Rx 2 SS: Not Supported (0x0003)
.... .... ..11 .... = Rx 3 SS: Not Supported (0x0003)
.... .... 11.. .... = Rx 4 SS: Not Supported (0x0003)
.... ..11 .... .... = Rx 5 SS: Not Supported (0x0003)
.... 11.. .... .... = Rx 6 SS: Not Supported (0x0003)
..11 .... .... .... = Rx 7 SS: Not Supported (0x0003)
11.. .... .... .... = Rx 8 SS: Not Supported (0x0003)
...0 0000 0000 0000 = Rx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000
Tx MCS Map: 0xffff
...0 0000 0000 0000 = Tx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000
Signed-off-by: Filip Matusiak <filip.matusiak@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit:
db4a835601b7 ("perf/core: Set cgroup in CPU contexts for new cgroup events")
failed to verify that event->cgrp is actually the scheduled cgroup
in a CPU before setting cpuctx->cgrp. This patch fixes that.
Now that there is a different path for scheduled and unscheduled
cgroup, add a warning to catch when cpuctx->cgrp is still set after
the last cgroup event has been unsheduled.
To verify the bug:
# Create 2 cgroups.
mkdir /dev/cgroups/devices/g1
mkdir /dev/cgroups/devices/g2
# launch a task, bind it to a cpu and move it to g1
CPU=2
while :; do : ; done &
P=$!
taskset -pc $CPU $P
echo $P > /dev/cgroups/devices/g1/tasks
# monitor g2 (it runs no tasks) and observe output
perf stat -e cycles -I 1000 -C $CPU -G g2
# time counts unit events
1.000091408 7,579,527 cycles g2
2.000350111 <not counted> cycles g2
3.000589181 <not counted> cycles g2
4.000771428 <not counted> cycles g2
# note first line that displays that a task run in g2, despite
# g2 having no tasks. This is because cpuctx->cgrp was wrongly
# set when context of new event was installed.
# After applying the fix we obtain the right output:
perf stat -e cycles -I 1000 -C $CPU -G g2
# time counts unit events
1.000119615 <not counted> cycles g2
2.000389430 <not counted> cycles g2
3.000590962 <not counted> cycles g2
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Link: http://lkml.kernel.org/r/1478026378-86083-1-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If pos is at the beginning of a page and copied is zero then page is not
zeroed but is marked uptodate.
Fix by skipping everything except unlock/put of page if zero bytes were
copied.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 6b12c1b37e55 ("fuse: Implement write_begin/write_end callbacks")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Change cs-gpio to cs-gpios.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
|
|
Commit d3cbff1b5 "powerpc: Put exception configuration in a common place"
broke the setting of the AIL bit (which enables taking exceptions with
the MMU still on) on all processors, moving it incorrectly to a function
called only on the boot CPU. This was correct for the guest case but
not when running in hypervisor mode.
This fixes it by partially reverting that commit, putting the setting
back in cpu_ready_for_interrupts()
Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The bit in the TC3589x direction register is 0 for input
and 1 for output, but the gpiolib expects the reverse.
Fix up the logic.
Cc: stable@vger.kernel.org
Fixes: 14063d71e5e6 ("gpio: tc3589x: add .get_direction() and small cleanup")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When locking a GPIO line as IRQ, we go to lengths to
double-check that the line is really set as input before
marking it as used for IRQ. This is not good on GPIO chips
that can sleep, because this function is called in IRQ-safe
context. Just skip this if it can't be checked quickly.
Currently this happens on sleeping expanders such as STMPE
or TC3589x:
BUG: scheduling while atomic: swapper/1/0x00000002
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc1+ #38
Hardware name: Nomadik STn8815
[<c000f2e0>] (unwind_backtrace) from [<c000d244>] (show_stack+0x10/0x14)
[<c000d244>] (show_stack) from [<c0037b78>] (__schedule_bug+0x54/0x80)
[<c0037b78>] (__schedule_bug) from [<c042df14>] (__schedule+0x3a0/0x460)
[<c042df14>] (__schedule) from [<c042e028>] (schedule+0x54/0xb8)
(...)
This patch fixes that problem and relies on the direction
read from the chip when it was added.
Cc: stable@vger.kernel.org
Fixes: 9c10280d85c1 ("gpio: flush direction status in gpiochip_lock_as_irq()")
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
The previous commit 1535aa75a3d8 ("qla2xxx: fix invalid DMA access after
command aborts in PCI device remove") introduced a regression during an
EEH recovery, since the change to the qla2x00_abort_all_cmds() function
calls qla2xxx_eh_abort(), which verifies the EEH recovery condition but
handles it heavy-handed. (commit a465537ad1a4 "qla2xxx: Disable the
adapter and skip error recovery in case of register disconnect.")
This problem warrants a more general/optimistic solution right into
qla2xxx_eh_abort() (eg in case a real command abort arrives during EEH
recovery, or if it takes long enough to trigger command aborts); but
it's still worth to add a check to ensure the code added by the previous
commit is correct and contained within its owner function.
This commit just adds a 'if (!ha->flags.eeh_busy)' check around it.
(ahem; a trivial fix for this -rc series; sorry for this oversight.)
With it applied, both PCI device remove and EEH recovery works fine.
Fixes: 1535aa75a3d8 ("scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove")
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull networking fixes from David Miller:
1) Fix off by one wrt. indexing when dumping /proc/net/route entries,
from Alexander Duyck.
2) Fix lockdep splats in iwlwifi, from Johannes Berg.
3) Cure panic when inserting certain netfilter rules when NFT_SET_HASH
is disabled, from Liping Zhang.
4) Memory leak when nft_expr_clone() fails, also from Liping Zhang.
5) Disable UFO when path will apply IPSEC tranformations, from Jakub
Sitnicki.
6) Don't bogusly double cwnd in dctcp module, from Florian Westphal.
7) skb_checksum_help() should never actually use the value "0" for the
resulting checksum, that has a special meaning, use CSUM_MANGLED_0
instead. From Eric Dumazet.
8) Per-tx/rx queue statistic strings are wrong in qed driver, fix from
Yuval MIntz.
9) Fix SCTP reference counting of associations and transports in
sctp_diag. From Xin Long.
10) When we hit ip6tunnel_xmit() we could have come from an ipv4 path in
a previous layer or similar, so explicitly clear the ipv6 control
block in the skb. From Eli Cooper.
11) Fix bogus sleeping inside of inet_wait_for_connect(), from WANG
Cong.
12) Correct deivce ID of T6 adapter in cxgb4 driver, from Hariprasad
Shenai.
13) Fix potential access past the end of the skb page frag array in
tcp_sendmsg(). From Eric Dumazet.
14) 'skb' can legitimately be NULL in inet{,6}_exact_dif_match(). Fix
from David Ahern.
15) Don't return an error in tcp_sendmsg() if we wronte any bytes
successfully, from Eric Dumazet.
16) Extraneous unlocks in netlink_diag_dump(), we removed the locking
but forgot to purge these unlock calls. From Eric Dumazet.
17) Fix memory leak in error path of __genl_register_family(). We leak
the attrbuf, from WANG Cong.
18) cgroupstats netlink policy table is mis-sized, from WANG Cong.
19) Several XDP bug fixes in mlx5, from Saeed Mahameed.
20) Fix several device refcount leaks in network drivers, from Johan
Hovold.
21) icmp6_send() should use skb dst device not skb->dev to determine L3
routing domain. From David Ahern.
22) ip_vs_genl_family sets maxattr incorrectly, from WANG Cong.
23) We leak new macvlan port in some cases of maclan_common_netlink()
errors. Fix from Gao Feng.
24) Similar to the icmp6_send() fix, icmp_route_lookup() should
determine L3 routing domain using skb_dst(skb)->dev not skb->dev.
Also from David Ahern.
25) Several fixes for route offloading and FIB notification handling in
mlxsw driver, from Jiri Pirko.
26) Properly cap __skb_flow_dissect()'s return value, from Eric Dumazet.
27) Fix long standing regression in ipv4 redirect handling, wrt.
validating the new neighbour's reachability. From Stephen Suryaputra
Lin.
28) If sk_filter() trims the packet excessively, handle it reasonably in
tcp input instead of exploding. From Eric Dumazet.
29) Fix handling of napi hash state when copying channels in sfc driver,
from Bert Kenward.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (121 commits)
mlxsw: spectrum_router: Flush FIB tables during fini
net: stmmac: Fix lack of link transition for fixed PHYs
sctp: change sk state only when it has assocs in sctp_shutdown
bnx2: Wait for in-flight DMA to complete at probe stage
Revert "bnx2: Reset device during driver initialization"
ps3_gelic: fix spelling mistake in debug message
net: ethernet: ixp4xx_eth: fix spelling mistake in debug message
ibmvnic: Fix size of debugfs name buffer
ibmvnic: Unmap ibmvnic_statistics structure
sfc: clear napi_hash state when copying channels
mlxsw: spectrum_router: Correctly dump neighbour activity
mlxsw: spectrum: Fix refcount bug on span entries
bnxt_en: Fix VF virtual link state.
bnxt_en: Fix ring arithmetic in bnxt_setup_tc().
Revert "include/uapi/linux/atm_zatm.h: include linux/time.h"
tcp: take care of truncations done by sk_filter()
ipv4: use new_gw for redirect neigh lookup
r8152: Fix error path in open function
net: bpqether.h: remove if_ether.h guard
net: __skb_flow_dissect() must cap its return value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile bugfix from Chris Metcalf:
"This just fixes an incompatibility with tile __ro_after_init"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: handle __ro_after_init like parisc does
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Here are a few driver fixes for 4.9. It has been calm for a while so I
don't expect more for this cycle.
Drivers:
- asm9260: fix module autoload
- cmos: fix crashes
- omap: fix clock handling"
* tag 'rtc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: omap: prevent disabling of clock/module during suspend
rtc: omap: Fix selecting external osc
rtc: cmos: Don't enable interrupts in the middle of the interrupt handler
rtc: cmos: remove all __exit_p annotations
rtc: asm9260: fix module autoload
|
|
The tile architecture already marks RO_DATA as read-only in
the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is
done by default, means the kernel faults in init when it tries
to write to RO_AFTER_INIT_DATA. For now, just arrange that
__ro_after_init is handled like __write_once, i.e. __read_mostly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
|
|
Since commit b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications
instead of switchdev calls") we reflect to the device the entire FIB
table and not only FIBs that point to netdevs created by the driver.
During module removal, FIBs of the second type are removed following
NETDEV_UNREGISTER events sent. The other FIBs are still present in both
the driver's cache and the device's table.
Fix this by iterating over all the FIB tables in the device and flush
them. There's no need to take locks, as we're the only writer.
Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
