| Age | Commit message (Collapse) | Author |
|---|
|
Drop the kerneldoc marker from a comment within a function:
wsa883x.c:1402: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504261851.TJGZIvtl-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250427105105.18164-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
This is separated from [1]. With an update that sorting the headers in a
separate patch. No other changes, so I still keep Linus' R-b for
Patch 2.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-3-c0db9d3fd6e9@nxp.com/
|
|
rlist, clist, and slist are allocated using sizeof(pointer) instead of
sizeof(*pointer). Fix the allocations by using sizeof(*pointer) and
avoid overallocating memory on 64-bit systems.
Fixes: f2f847461fb7 ("ASoC: Intel: avs: Constrain path based on BE capabilities")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20250426141342.94134-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
of_gpio.h is deprecated. And there is no user in this driver
using API in of_gpio.h, so remove it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250427055020.176099-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use of_property_present to check "ti,hs_extmute_gpio" to set hs_extmute
- if returned value is true.
- Use devm_gpiod_get_optional to get GPIO descriptor, set consumer name.
- Use gpiod_set_value to configure output value.
While at here
- drop remove hook after switching to use devm_gpiod_get_optional
- Add return value for twl4030_init_chip to propagate value to parent
in case defer probe happens
Checking the only user logicpd-som-lv.dtsi that uses polarity
GPIO_ACTIVE_HIGH, so all should work as expected.
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250428-twl4030-v2-2-868d0d572f12@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sort headers alphabetically to easily insert new ones
and drop unused ones.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250428-twl4030-v2-1-868d0d572f12@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It's no longer necessary to no_free_ptr() an auto-freed pointer before
passing it to PTR_ERR(). This was fixed by commit
cd7eb8f83fcf ("mm/slab: make __free(kfree) accept error pointers").
Removing the no_free_ptr() avoids the spurious warning
"inconsistent IS_ERR and PTR_ERR".
Fixes: b5d057a86e20 ("ASoC: wm_adsp: Use vmemdup_user() instead of open-coding")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504270751.nR3Ngfrq-lkp@intel.com/
Link: https://patch.msgid.link/20250428090803.97909-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use min() to simplify aw_dev_dsp_update_container() and improve its
readability.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250429071032.65391-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct snd_sof_pipeline **", but the returned type
will be "struct snd_sof_widget **". These are the same size allocation
(pointer size) but the types don't match. Adjust the allocation type to
match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Fixes: 9c04363d222b ("ASoC: SOF: Introduce struct snd_sof_pipeline")
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250426062511.work.859-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "get_function_tplg_files" function is only applicable to
ACPI-based devices (sof_pdata->machine and not sof_pdata->of_machine).
Skip this check for OF-based devices to avoid a NULL pointer
dereference in snd_sof_load_topology().
Fixes: 6d5997c412cc ("ASoC: SOF: topology: load multiple topologies")
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250429-fixup-of-sof-topology-v4-1-ff692244d64c@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 'card' pointer is not required to be NULL initialized as it is never
accessed before the related memory allocation takes place.
Drop the redundant assignment.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250429-acp-sof-probe-assign-v1-1-9784f6eb7660@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Revert a v6.15 patch due to a report of SELinux test failures
* tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix 32-bit kernel boot crash if passed physical memory with more than
32 address bits
- Fix Xen PV crash
- Work around build bug in certain limited build environments
- Fix CTEST instruction decoding in insn_decoder_test
* tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix CTEST instruction decoding
x86/boot: Work around broken busybox 'truncate' tool
x86/mm: Fix _pgd_alloc() for Xen PV mode
x86/e820: Discard high memory that can't be addressed by 32-bit systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix sporadic crashes in dequeue_entities() due to ... bad math.
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting of
complex math being correct it could have de-escalated a crash into
a warning, but that's for a different patch ]"
* tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix crashes in the gic-v2m irqchip driver, caused by an incorrect
__init annotation"
* tag 'irq-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Add a missing Kconfig option, fix some bugs in exception handlers,
memory management and KVM"
* tag 'loongarch-fixes-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finally
LoongArch: KVM: Fully clear some CSRs when VM reboot
LoongArch: KVM: Fix multiple typos of KVM code
LoongArch: Return NULL from huge_pte_offset() for invalid PMD
LoongArch: Remove a bogus reference to ZONE_DMA
LoongArch: Handle fp, lsx, lasx and lbt assembly symbols
LoongArch: Make do_xyz() exception handlers more robust
LoongArch: Make regs_irqs_disabled() more clear
LoongArch: Select ARCH_USE_MEMTEST
|
|
Pull OpenRISC updates from Stafford Horne:
- Support for cacheinfo API to expose OpenRISC cache info via sysfs,
this also translated to some cleanups to OpenRISC cache flush and
invalidate API's
- Documentation updates for new mailing list and toolchain binaries
* tag 'for-linus' of https://github.com/openrisc/linux:
Documentation: openrisc: Update toolchain binaries URL
Documentation: openrisc: Update mailing list
openrisc: Add cacheinfo support
openrisc: Introduce new utility functions to flush and invalidate caches
openrisc: Refactor struct cpuinfo_or1k to reduce duplication
|
|
Ondrej reports that certain SELinux tests are failing after commit
fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kunit fix from Kees Cook:
"A single fix for the kunit lib/tests/ relocation:
- Ensure prime numbers tests are included in KUnit test runs (Mark Brown)"
* tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: Ensure prime numbers tests are included in KUnit test runs
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a
couple of minor fixes, seems a bit quiet, but probably some lag from
Easter holidays.
amdgpu:
- P2P DMA fixes
- Display reset fixes
- DCN 3.5 fixes
- ACPI EDID fix
- LTTPR fix
- mode_valid() fix
exynos:
- fix spelling error
- remove redundant error handling in exynos_drm_vidi.c module
- marks struct decon_data as const in the exynos7_drm_decon driver
since it is only read
- Remove unnecessary checking in exynos_drm_drv.c module
meson:
- Fix VCLK calculation
panel:
- jd9365a: Fix reset polarity"
* tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/exynos: Fix spelling mistake "enqueu" -> "enqueue"
drm/exynos: exynos7_drm_decon: Consstify struct decon_data
drm/exynos: fixed a spelling error
drm/exynos/vidi: Remove redundant error handling in vidi_get_modes()
drm/exynos: Remove unnecessary checking
drm/amd/display: do not copy invalid CRTC timing info
drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF
drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks
drm/amd/display: Fix ACPI edid parsing on some Lenovo systems
drm/amdgpu: Allow P2P access through XGMI
drm/amd/display: Enable urgent latency adjustment on DCN35
drm/amd/display: Force full update in gpu reset
drm/amd/display: Fix gpu reset in multidisplay config
drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY
drm/amdgpu: Use allowed_domains for pinning dmabufs
drm: panel: jd9365da: fix reset signal polarity in unprepare
drm/meson: use unsigned long long / Hz for frequency types
Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Renesas MSIOF can work as both SPI and I2S.
Current Linux supports MSIOF-SPI. This patch-set adds new MSIOF-I2S.
Because it is using same HW-IP, we want to share same compatible for both
MSIOF-SPI/I2S case. MSIOF-I2S (Sound) will use Audio-Graph-Card/Card2 which
uses Of-Graph, but MSIOF-SPI is not use Of-Graph.
So, this patch-set assumes it was used as MSIOF-I2S if DT is using Of-Graph,
otherwise, it is MSIOF-SPI (This assumption will works if SPI *never*
use Of-Graph in the future).
One note so far is that it is using "spi@xxx" node name for both
MSIOF-SPI/I2S. DTC will automatically checks "spi@xxx" node as SPI device
which requests #address-cells/#size-cells. But is not needed for I2S.
So we will get warning about it on Sparrow Hawk which uses MSIOF-I2S.
We have no solution about it, so far.
Link: https://lore.kernel.org/r/87zfgi1a5a.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h62vh5mj.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/875xjeb0wu.wl-kuninori.morimoto.gx@renesas.com
|
|
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
|
|
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
In function kvm_pre_enter_guest(), it prepares to enter guest and check
whether there are pending signals or events. And it will not enter guest
if there are, PMU pass-through preparation for guest should be cancelled
and host should own PMU hardware.
Cc: stable@vger.kernel.org
Fixes: f4e40ea9f78f ("LoongArch: KVM: Add PMU support for guest")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some registers such as LOONGARCH_CSR_ESTAT and LOONGARCH_CSR_GINTC are
partly cleared with function _kvm_setcsr(). This comes from the hardware
specification, some bits are read only in VM mode, and however they can
be written in host mode. So they are partly cleared in VM mode, and can
be fully cleared in host mode.
These read only bits show pending interrupt or exception status. When VM
reset, the read-only bits should be cleared, otherwise vCPU will receive
unknown interrupts in boot stage.
Here registers LOONGARCH_CSR_ESTAT/LOONGARCH_CSR_GINTC are fully cleared
in ioctl KVM_REG_LOONGARCH_VCPU_RESET vCPU reset path.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix multiple typos inside arch/loongarch/kvm.
Cc: stable@vger.kernel.org
Reviewed-by: Yuli Wang <wangyuli@uniontech.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yulong Han <wheatfox17@icloud.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA).
The architecture does not even define MAX_DMA_PFN.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like the other relevant symbols, export some fp, lsx, lasx and lbt
assembly symbols and put the function declarations in header files
rather than source files.
While at it, use "asmlinkage" for the other existing C prototypes
of assembly functions and also do not use the "extern" keyword with
function declarations according to the document coding-style.rst.
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, interrupts need to be disabled before single-step mode is
set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag()
which is called by setup_singlestep(), this is reasonable.
But in the first kprobe breakpoint exception, if the irq is enabled at
the beginning of do_bp(), it will not be disabled at the end of do_bp()
due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for
this case, it may corrupt exception context when restoring the exception
after do_bp() in handle_bp(), this is not reasonable.
In order to restore exception safely in handle_bp(), it needs to ensure
the irq is disabled at the end of do_bp(), so just add a local variable
to record the original interrupt status in the parent context, then use
it as the check condition to enable and disable irq in do_bp().
While at it, do the similar thing for other do_xyz() exception handlers
to make them more robust.
Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support")
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3f2 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As of commit dce44566192e ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e9a ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e9a ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Renesas MSIOF (Clock-Synchronized Serial Interface with FIFO) can work as
both SPI and I2S. Adds MSIOF-I2S driver.
MSIOF-SPI/I2S are using same DT compatible properties.
MSIOF-I2S uses Of-Graph for Audio-Graph-Card/Card2,
MSIOF-SPI doesn't use Of-Graph.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87r01q2wzv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ADG needs its MSTP to use it, and it was handled as "clk_i" before.
R-Car Gen2/Gen3 are using it, but Gen4 doesn't have it.
"clk_i" is not intuitive for ADG MSTP.
Let's enable to use "adg" clock. It can keep compatible with R-Car
Gen2/Gen3 and Gen4.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sem62x00.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas rsnd related clocks are enabled by rsnd_adg_clk_enable(),
but it doesn't care about BRGA/BRGB selection (It is handled when
SSI was started) (BRGA is used for 44.1kHz lineage, BRGB is used for
48kHz lineage in this driver).
But it should be handled since probe time.
Includes BRGCKR_31 in adg->ckr to handle it since boot time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt6m2x05.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Audio clock generator (= ADG) can be used standalone (without DAI),
but current driver indicates error if it doesn't have DAI on DT.
It is not error, allow to use ADG as standalone.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7r22x0a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas MSIOF (Clock-Synchronized Serial Interface with FIFO) can work as
both SPI and I2S. MSIOF-I2S will use Audio Graph Card/Card2 driver which
uses Of-Graph in DT.
MSIOF-SPI/I2S are using same DT compatible properties.
MSIOF-I2S uses Of-Graph for Audio-Graph-Card/Card2,
MSIOF-SPI doesn't use Of-Graph.
Adds schema for MSIOF-I2S (= Sound).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/87zfge2x0u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Add namespace to BPF internal symbols (Alexei Starovoitov)
- Fix possible endless loop in BPF map iteration (Brandon Kammerdiener)
- Fix compilation failure for samples/bpf on LoongArch (Haoran Jiang)
- Disable a part of sockmap_ktls test (Ihor Solodrai)
- Correct typo in __clang_major__ macro (Peilin Ye)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Correct typo in __clang_major__ macro
samples/bpf: Fix compilation failure for samples/bpf on LoongArch Fedora
bpf: Add namespace to BPF internal symbols
selftests/bpf: add test for softlock when modifying hashmap while iterating
bpf: fix possible endless loop in BPF map iteration
selftests/bpf: Mitigate sockmap_ktls disconnect_after_delete failure
|
|
Make sure that CAN_USE_BPF_ST test (compute_live_registers/store) is
enabled when __clang_major__ >= 18.
Fixes: 2ea8f6a1cda7 ("selftests/bpf: test cases for compute_live_registers()")
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250425213712.1542077-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the incorrect return type of ata_mselect_control_ata_feature()
- Several fixes for the control of the Command Duration Limits feature
to avoid unnecessary enable and disable actions. Avoiding the
unnecessary enable action also avoids unwanted resets of the CDL
statistics log page as that is implied for any enable action.
- Fix the translation for sensing the control mode page to correctly
return the last enable or disable action performed, as defined in
SAT-6. This correct mode sense information is used to fix the
behavior of the scsi layer to avoid unnecessary mode select command
issuing.
* tag 'ata-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
scsi: Improve CDL control
ata: libata-scsi: Improve CDL control
ata: libata-scsi: Fix ata_msense_control_ata_feature()
ata: libata-scsi: Fix ata_mselect_control_ata_feature() return type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- For some reason we went from zero to three maintainers for HFS/HFS+
in a matter of days. The lesson to learn from this might just be that
we need to threaten code removal more often!?
- Fix a regression introduced by enabling large folios for lage logical
block sizes. This has caused issues for noref migration with large
folios due to sleeping while in an atomic context.
New sleeping variants of pagecache lookup helpers are introduced.
These helpers take the folio lock instead of the mapping's private
spinlock. The problematic users are converted to the sleeping
variants and serialize against noref migration. Atomic users will
bail on seeing the new BH_Migrate flag.
This also shrinks the critical region of the mapping's private lock
and the new blocking callers reduce contention on the spinlock for
bdev mappings.
- Fix two bugs in do_move_mount() when with MOVE_MOUNT_BENEATH. The
first bug is using a mountpoint that is located on a mount we're not
holding a reference to. The second bug is putting the mountpoint
after we've called namespace_unlock() as it's no longer guaranteed
that it does stay a mountpoint.
- Remove a pointless call to vfs_getattr_nosec() in the devtmpfs code
just to query i_mode instead of simply querying the inode directly.
This also avoids lifetime issues for the dm code by an earlier bugfix
this cycle that moved bdev_statx() handling into vfs_getattr_nosec().
- Fix AT_FDCWD handling with getname_maybe_null() in the xattr code.
- Fix a performance regression for files when multiple callers issue a
close when it's not the last reference.
- Remove a duplicate noinline annotation from pipe_clear_nowait().
* tag 'vfs-6.15-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/xattr: Fix handling of AT_FDCWD in setxattrat(2) and getxattrat(2)
MAINTAINERS: hfs/hfsplus: add myself as maintainer
splice: remove duplicate noinline from pipe_clear_nowait
devtmpfs: don't use vfs_getattr_nosec to query i_mode
fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount()
fs: fall back to file_ref_put() for non-last reference
mm/migrate: fix sleep in atomic for large folios and buffer heads
fs/ext4: use sleeping version of sb_find_get_block()
fs/jbd2: use sleeping version of __find_get_block()
fs/ocfs2: use sleeping version of __find_get_block()
fs/buffer: use sleeping version of __find_get_block()
fs/buffer: introduce sleeping flavors for pagecache lookups
MAINTAINERS: add HFS/HFS+ maintainers
fs/buffer: split locking for pagecache lookups
|
|
Pull ceph fixes from Ilya Dryomov:
"A small CephFS encryption-related fix and a dead code cleanup"
* tag 'ceph-for-6.15-rc4' of https://github.com/ceph/ceph-client:
ceph: Fix incorrect flush end position calculation
ceph: Remove osd_client deadcode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
"The fixes address global persistent flush (GPF) changes and CXL
Features support changes that went in the 6.15 merge window. And also
a fix to an issue observed on CXL 1.1 platform during device
enumeration.
Summary:
- Fix using the wrong GPF DVSEC location:
- Fix caching of dport GPF DVSEC from the first endpoint
- Ensure that the GPF phase timeout is only updated once by first
endpoint
- Drop is_port parameter for cxl_gpf_get_dvsec()
- Fix the devm_* call host device for CXL fwctl setup
- Set the out_len in Set Features failure case
- Fix RCD initialization by skipping unneeded mem_en check"
* tag 'cxl-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs.c: Skip Memory Space Enable check for RCD and RCH Ports
cxl/feature: Update out_len in set feature failure case
cxl: Fix devm host device for CXL fwctl initialization
cxl/pci: Drop the parameter is_port of cxl_gpf_get_dvsec()
cxl/pci: Update Port GPF timeout only when the first EP attaching
cxl/core: Fix caching dport GPF DVSEC issue
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-04-23:
amdgpu:
- P2P DMA fixes
- Display reset fixes
- DCN 3.5 fixes
- ACPI EDID fix
- LTTPR fix
- mode_valid() fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250423183045.2886753-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Several fixups
- fix spelling error
- remove redundant error handling in exynos_drm_vidi.c module.
- marks struct decon_data as const in the exynos7_drm_decon driver since it is only read.
Cleanup
- Remove unnecessary checking in exynos_drm_drv.c module
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250423143044.46165-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
meson:
- Fix VCLK calculation
panel:
- jd9365a: Fix reset polarity
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250422151209.GA24823@2a02-2454-fd5e-fd00-5cc9-93f1-8e9a-df9b.dyn6.pyur.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a missing icache flush in uprobes, which manifests as at
least a BFF selftest failure on the Spacemit X1
- A workaround for build warnings in flush_icache_range()
* tag 'riscv-for-linus-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: uprobes: Add missing fence.i after building the XOL buffer
riscv: Replace function-like macro by static inline function
|
