| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
"This changeset has a few main parts:
- Ilya has finished a huge refactoring effort to sync up the
client-side logic in libceph with the user-space client code, which
has evolved significantly over the last couple years, with lots of
additional behaviors (e.g., how requests are handled when cluster
is full and transitions from full to non-full).
This structure of the code is more closely aligned with userspace
now such that it will be much easier to maintain going forward when
behavior changes take place. There are some locking improvements
bundled in as well.
- Zheng adds multi-filesystem support (multiple namespaces within the
same Ceph cluster)
- Zheng has changed the readdir offsets and directory enumeration so
that dentry offsets are hash-based and therefore stable across
directory fragmentation events on the MDS.
- Zheng has a smorgasbord of bug fixes across fs/ceph"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
ceph: fix wake_up_session_cb()
ceph: don't use truncate_pagecache() to invalidate read cache
ceph: SetPageError() for writeback pages if writepages fails
ceph: handle interrupted ceph_writepage()
ceph: make ceph_update_writeable_page() uninterruptible
libceph: make ceph_osdc_wait_request() uninterruptible
ceph: handle -EAGAIN returned by ceph_update_writeable_page()
ceph: make fault/page_mkwrite return VM_FAULT_OOM for -ENOMEM
ceph: block non-fatal signals for fault/page_mkwrite
ceph: make logical calculation functions return bool
ceph: tolerate bad i_size for symlink inode
ceph: improve fragtree change detection
ceph: keep leaf frag when updating fragtree
ceph: fix dir_auth check in ceph_fill_dirfrag()
ceph: don't assume frag tree splits in mds reply are sorted
ceph: fix inode reference leak
ceph: using hash value to compose dentry offset
ceph: don't forbid marking directory complete after forward seek
ceph: record 'offset' for each entry of readdir result
ceph: define 'end/complete' in readdir reply as bit flags
...
|
|
When btrfs_copy_from_user isn't able to copy all of the pages, we need
to adjust our accounting to reflect the work that was actually done.
Commit 2e78c927d79 changed around the decisions a little and we ended up
skipping the accounting adjustments some of the time. This commit makes
sure that when we don't copy anything at all, we still hop into
the adjustments, and switches to release_bytes instead of write_bytes,
since write_bytes isn't aligned.
The accounting errors led to warnings during btrfs_destroy_inode:
[ 70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0
[ 70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk
[ 70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G W 4.6.0-rc6_00062_g2997da1-dirty #23
[ 70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[ 70.847542] 0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202
[ 70.847543] 0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08
[ 70.847547] ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28
[ 70.847547] Call Trace:
[ 70.847550] [<ffffffff8149d5e9>] dump_stack+0x51/0x78
[ 70.847551] [<ffffffff8107bdfd>] __warn+0xfd/0x120
[ 70.847553] [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20
[ 70.847555] [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0
[ 70.847556] [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140
[ 70.847558] [<ffffffff812004b3>] destroy_inode+0x43/0x70
[ 70.847559] [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40
[ 70.847560] [<ffffffff81200c68>] evict+0x148/0x1d0
[ 70.847562] [<ffffffff81398ade>] ? start_transaction+0x3de/0x460
[ 70.847564] [<ffffffff81200d49>] dispose_list+0x59/0x80
[ 70.847565] [<ffffffff81201ba0>] evict_inodes+0x180/0x190
[ 70.847566] [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50
[ 70.847568] [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100
[ 70.847569] [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20
[ 70.847571] [<ffffffff811e9796>] kill_anon_super+0x16/0x30
[ 70.847573] [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130
[ 70.847574] [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90
[ 70.847576] [<ffffffff811e9e61>] deactivate_super+0x51/0x70
[ 70.847577] [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80
[ 70.847579] [<ffffffff81205402>] __cleanup_mnt+0x12/0x20
[ 70.847581] [<ffffffff81098358>] task_work_run+0x68/0xa0
[ 70.847582] [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0
[ 70.847583] [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170
[ 70.847586] [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25
This is the test program I used to force short returns from
btrfs_copy_from_user
void *dontneed(void *arg)
{
char *p = arg;
int ret;
while(1) {
ret = madvise(p, BUFSIZE/4, MADV_DONTNEED);
if (ret) {
perror("madvise");
exit(1);
}
}
}
int main(int ac, char **av) {
int ret;
int fd;
char *filename;
unsigned long offset;
char *buf;
int i;
pthread_t tid;
if (ac != 2) {
fprintf(stderr, "usage: dammitdave filename\n");
exit(1);
}
buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
if (buf == MAP_FAILED) {
perror("mmap");
exit(1);
}
memset(buf, 'a', BUFSIZE);
filename = av[1];
ret = pthread_create(&tid, NULL, dontneed, buf);
if (ret) {
fprintf(stderr, "error %d from pthread_create\n", ret);
exit(1);
}
ret = pthread_detach(tid);
if (ret) {
fprintf(stderr, "pthread detach failed %d\n", ret);
exit(1);
}
while (1) {
fd = open(filename, O_RDWR | O_CREAT, 0600);
if (fd < 0) {
perror("open");
exit(1);
}
for (i = 0; i < ROUNDS; i++) {
int this_write = BUFSIZE;
offset = rand() % MAXSIZE;
ret = pwrite(fd, buf, this_write, offset);
if (ret < 0) {
perror("pwrite");
exit(1);
} else if (ret != this_write) {
fprintf(stderr, "short write to %s offset %lu ret %d\n",
filename, offset, ret);
exit(1);
}
if (i == ROUNDS - 1) {
ret = sync_file_range(fd, offset, 4096,
SYNC_FILE_RANGE_WRITE);
if (ret < 0) {
perror("sync_file_range");
exit(1);
}
}
}
ret = ftruncate(fd, 0);
if (ret < 0) {
perror("ftruncate");
exit(1);
}
ret = close(fd);
if (ret) {
perror("close");
exit(1);
}
ret = unlink(filename);
if (ret) {
perror("unlink");
exit(1);
}
}
return 0;
}
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Dave Jones <dsj@fb.com>
Fixes: 2e78c927d79333f299a8ac81c2fd2952caeef335
cc: stable@vger.kernel.org # v4.6
Signed-off-by: Chris Mason <clm@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
|
|
i2c-dev had never moved away from the older register_chrdev interface to
implement its char device registration. The register_chrdev API has the
limitation of enabling only up to 256 i2c-dev busses to exist.
Large platforms with lots of i2c devices (i.e. pluggable transceivers)
with dedicated busses may have to exceed that limit.
In particular, there are also platforms making use of the i2c bus
multiplexing API, which instantiates a virtual bus for each possible
multiplexed selection.
This patch removes the register_chrdev usage and replaces it with the
less old cdev API, which takes away the 256 i2c-dev bus limitation.
It should not have any other impact for i2c bus drivers or user space.
This patch has been tested on qemu x86 and qemu powerpc platforms with
the aid of a module which adds and removes 5000 virtual i2c busses, as
well as validated on an existing powerpc hardware platform which makes
use of the i2c bus multiplexing API.
i2c-dev busses with device minor numbers larger than 256 have also been
validated to work with the existing i2c-tools.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
[wsa: kept includes sorted]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The ARCH name was changed during the review process of the mach, and
this driver was forgotten to be converted. Fix it now.
http://article.gmane.org/gmane.linux.ports.arm.kernel/456331
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
[wsa: updated commit message slightly]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
When the DMA configuration fails, there is a log reporting that we can't
use DMA and indicating the error number. When booting the kernel, it is
annoying to see this error number. Moreover, people can think something
is going wrong. It is not the case, it means that DMA can't be used but
it doesn't prevent to use i2c.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
This commit fixes a simple typo s/mvmem/nvmem in the
example.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
If NO_DMA=y:
drivers/built-in.o: In function `rcar_i2c_dma_unmap':
i2c-rcar.c:(.text+0x6f06c6): undefined reference to `bad_dma_ops'
drivers/built-in.o: In function `rcar_i2c_dma':
i2c-rcar.c:(.text+0x6f07e2): undefined reference to `bad_dma_ops'
i2c-rcar.c:(.text+0x6f0838): undefined reference to `bad_dma_ops'
Add a dependency on HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
New drivers should not use dma_request_slave_channel_reason() but
dma_request_chan(). The former is a macro to the later so this change do
not effect the driver in any way.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and
write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client
has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call"
* tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (61 commits)
pnfs: pnfs_update_layout needs to consider if strict iomode checking is on
nfs/flexfiles: Use the layout segment for reading unless it a IOMODE_RW and reading is disabled
nfs/flexfiles: Helper function to detect FF_FLAGS_NO_READ_IO
nfs: avoid race that crashes nfs_init_commit
NFS: checking for NULL instead of IS_ERR() in nfs_commit_file()
pnfs: make pnfs_layout_process more robust
pnfs: rework LAYOUTGET retry handling
pnfs: lift retry logic from send_layoutget to pnfs_update_layout
pnfs: fix bad error handling in send_layoutget
flexfiles: add kerneldoc header to nfs4_ff_layout_prepare_ds
flexfiles: remove pointless setting of NFS_LAYOUT_RETURN_REQUESTED
pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args
pnfs: keep track of the return sequence number in pnfs_layout_hdr
pnfs: record sequence in pnfs_layout_segment when it's created
pnfs: don't merge new ff lsegs with ones that have LAYOUTRETURN bit set
pNFS/flexfiles: When initing reads or writes, we might have to retry connecting to DSes
pNFS/flexfiles: When checking for available DSes, conditionally check for MDS io
pNFS/flexfile: Fix erroneous fall back to read/write through the MDS
NFS: Reclaim writes via writepage are opportunistic
NFSv4: Use the right stateid for delegations in setattr, read and write
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"A pretty average collection of fixes, cleanups and improvements in
this request.
Summary:
- fixes for mount line parsing, sparse warnings, read-only compat
feature remount behaviour
- allow fast path symlink lookups for inline symlinks.
- attribute listing cleanups
- writeback goes direct to bios rather than indirecting through
bufferheads
- transaction allocation cleanup
- optimised kmem_realloc
- added configurable error handling for metadata write errors,
changed default error handling behaviour from "retry forever" to
"retry until unmount then fail"
- fixed several inode cluster writeback lookup vs reclaim race
conditions
- fixed inode cluster writeback checking wrong inode after lookup
- fixed bugs where struct xfs_inode freeing wasn't actually RCU safe
- cleaned up inode reclaim tagging"
* tag 'xfs-for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (39 commits)
xfs: fix warning in xfs_finish_page_writeback for non-debug builds
xfs: move reclaim tagging functions
xfs: simplify inode reclaim tagging interfaces
xfs: rename variables in xfs_iflush_cluster for clarity
xfs: xfs_iflush_cluster has range issues
xfs: mark reclaimed inodes invalid earlier
xfs: xfs_inode_free() isn't RCU safe
xfs: optimise xfs_iext_destroy
xfs: skip stale inodes in xfs_iflush_cluster
xfs: fix inode validity check in xfs_iflush_cluster
xfs: xfs_iflush_cluster fails to abort on error
xfs: remove xfs_fs_evict_inode()
xfs: add "fail at unmount" error handling configuration
xfs: add configuration handlers for specific errors
xfs: add configuration of error failure speed
xfs: introduce table-based init for error behaviors
xfs: add configurable error support to metadata buffers
xfs: introduce metadata IO error class
xfs: configurable error behavior via sysfs
xfs: buffer ->bi_end_io function requires irq-safe lock
...
|
|
This is no longer in use. Remove it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In practice, each RDMA device has a unique set of counters that the
hardware implements. Having a central set of counters that they must
all adhere to is limiting and causes many useful counters to not be
available.
Therefore we create a dynamic counter registration infrastructure.
The driver must implement a stats structure allocation routine, in
which the driver must place the directory name it wants, a list of
names for all of the counters, an array of u64 counters themselves,
plus a few generic configuration options.
We then implement a core routine to create a sysfs file for each
of the named stats elements, and a core routine to retrieve the
stats when any of the sysfs attribute files are read.
To avoid excessive beating on the stats generation routine in the
drivers, the core code also caches the stats for a short period of
time so that someone attempting to read all of the stats in a
given device's directory will not result in a stats generation
call per file read.
Future work will attempt to standardize just the shared stats
elements, and possibly add a method to get the stats via netlink
in addition to sysfs.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
[ Add caching, make structure names more informative, add i40iw support,
other significant rewrites from the original patch ]
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon fixlets from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
Documentation/hwmon: Update links in max34440
hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
|
|
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.7 rc1. They are based on a
commit earlier in the merge window and have been tested in linux-next
for a while.
MMC core:
- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly"
* tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: longer timeout for long read time quirk
mmc: dw_mmc: rockchip: Set the drive phase properly
mmc: dw_mmc: fix the wrong max_blk_size
mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilities
mmc: sdhci-acpi: Ensure connected devices are powered when probing
ACPI / PM: Export acpi_device_fix_up_power()
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- Introduce generic ADC thermal driver, based on OF thermal (Laxman
Dewangan)
- Introduce new thermal driver for Tango chips (Marc Gonzalez)
- Rockchip driver support for RK3399, RK3366, and some fixes (Caesar
Wang, Elaine Zhang and Shawn Lin)
- Add CPU power cooling model to Mediatek thermal driver (Dawei Chien)
- Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin)
- TI thermal driver gained a new maintainer (Keerthy).
- Enabled powerclamp driver by checking CPU feature and package cstate
counter instead of CPU whitelist (Jacob Pan)
- Various fixes on thermal governor, OF thermal, Tegra, and RCAR
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits)
thermal: tango: initialize TEMPSI_CFG
thermal: rockchip: use the usleep_range instead of udelay
thermal: rockchip: add the notes for better reading
thermal: rockchip: Support RK3366 SoCs in the thermal driver
thermal: rockchip: handle the power sequence for tsadc controller
thermal: rockchip: update the tsadc table for rk3399
thermal: rockchip: fixes the code_to_temp for tsadc driver
thermal: rockchip: disable thermal->clk in err case
thermal: tegra: add Tegra132 specific SOC_THERM driver
thermal: fix ptr_ret.cocci warnings
thermal: mediatek: Add cpu dynamic power cooling model.
thermal: generic-adc: Add ADC based thermal sensor driver
thermal: generic-adc: Add DT binding for ADC based thermal sensor
thermal: tegra: fix static checker warning
thermal: tegra: mark PM functions __maybe_unused
thermal: add temperature sensor support for tango SoC
thermal: hisilicon: fix IRQ imbalance enabling
thermal: hisilicon: support to use any sensor
thermal: rcar: Remove binding docs for r8a7794
thermal: tegra: add PM support
...
|
|
The pio map initialization function is off by 1 causing the last
kernel send context that is allocated to not get mapped into the
pio map which leads to the last kernel send context not being used
by any of the qps.
The send context reserved for VL15 is taken care of by setting the
scontext variable that is used as the index into the kernel send
context array to 1 and does not need to be accounted for in the
kernel send context counting loop as it is currently done.
Fix the kernel send context counting loop to account for all the
allocated send contexts and map all of them to the different VLs.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Two 8051 link settings, external device config and tuning method,
were written in the wrong location and the previous settings were
not cleared. For both, clear the old value and write the new
value.
Fixes: 8ebd4cf1852a ("staging/rdma/hfi1: Add active and optical cable support")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When FM is disabled, and the HFI port on the switch is
changed from MgmtAllowed=YES to MgmtAllowed=NO and the
link is bounced, FULL_MGMT_P_KEY doesn't get cleared
from the pkey table. This also occurs when the QSFP
cable is moved from a switch port with MgmtAllowed=YES
to a MgmtAllowed=NO port. Clear pkey entry properly.
Also, when the driver is loaded and the switch port is
set to MgmtAllowed=NO, FULL_MGMT_P_KEY shouldn't be added
to pkey table after FM is started. Only set FULL_MGMT_P_KEY
in the pkey table if switch port is configured to
MgmtAllowed=YES.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
rdmavt allows the driver to specify the size of the ack queue, but
only uses it for the modify QP limit testing for setting the atomic
limit value.
The driver dependent size is now used to size the s_ack_queue ring
dynamicially.
Since the driver knows its size, the driver will use its define
for any ring size dependent code.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This matches the ib_qp_attr size and
avoids a extremely large value when the lower level
driver registers.
As part of the patch, the u8 ordinals are moved to the
end of the struct to reduce pahole noted excesses.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Commit b9b06cb6feda
("IB/hfi1: Fix missing lock/unlock in verbs drain callback")
added a spin lock.
Unfortunately, the new lock code can be called from a base
level interrupt state, and an interrupt that can get stacked
will attempt to get the same lock.
Fix by using the flag save/restore spin lock variation.
Cc: stable@vger.kernel.org # 4.6+
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Enable trace generation for packets with the "Send Last with
Invalidate" and "Send Only with Invalidate" opcodes.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A new union member "ieth" (Invalidate Extended Transport Header) is
added to the packet header definition in preparation of supporting
the send with invalidate opcode.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Yama locking fix from James Morris:
"Fix for the Yama LSM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Yama: fix double-spinlock and user access in atomic context
|
|
|
|
The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been addressed as well. It is now time to remove the driver from
staging and into the drivers/infiniband sub-tree.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The deletion of a cdev is not a fence for holding off references to the
structure. The driver attempts to delete the cdev and then proceeds to
free the parent structure, the hfi1_devdata, or dd. This can potentially
lead to a kernel panic in situations where a user has an FD for the cdev
open, and the pci device gets removed. If the user then closes the FD
there will be a NULL dereference when trying to do put on the cdev's
kobject.
Fix this by pointing the cdev's kobject.parent at a new kobject embedded
in its parent structure. Also take a reference when the device is opened
and put it back when it is closed.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add a trace message to HFI1s user IOCTL handling. This allows debugging
of which IOCTLs are being handled by the driver.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Remove the write() handler for user space commands now that ioctl
handling is available. User apps will need to change to use ioctl from
this point forward.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
IOCTL is more suited to what user space commands need to do than the
write() interface. Add IOCTL definitions for all existing write commands
and the handling for those. The write() interface will be removed in a
follow on patch.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The HFI1_CMD_SDMA_STATUS_UPD command was never implemented it has no
reason to live in the driver. Remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The snoop/diag interface is better served by an implementation which is
more general and usable by other drivers perhaps. Go ahead and remove
the code now and get rid of the char dev. We can put the feature back
when we have a more agreeable solution.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Remove EPROM handling from the cdev which is used for user application
data traffic.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Remove UI char device which exposes direct access to registers for user
space. This was put in to aid in debugging the hardware. We are looking
into alternatives means of providing the same functionality. This
removes another char device from HFI1's footprint.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
hfi1 current exports a cdev that can be used to target all of the hfi's
in the system. However there is a problem with this approach in
that the devices could be on different subnets. This is a problem that
user space can figure out and explicitly tell the driver on which device
to create a context.
Remove the multi-purpose cdev leaving a dedicated cdev for each port.
Also remove the striping capability that is dependent upon the user
choosing the multi-purpose cdev. It is now up to user space to determine
how to stripe contexts.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Remove the usage of an anti-pattern goto in hfi1_cdev_init to improve
code readability.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
During the processing of a user SDMA request, if there was an
error before the request counter was increased, the state of
the packet queue could be updated incorrectly, causing the
counter to underflow. As the result, the process could get
stuck later since the counter could never get back to 0.
This patch adds a condition to guard the packet queue update
so that the counter is only decreased if it has been increased
before the error happens.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Building the qib driver with gcc version 6.1.0 raises the following
build warning:
drivers/infiniband/hw/qib/qib_iba7322.c:1311:39: warning:
'qib_7322_intr_msgs' defined but not used [-Wunused-const-variable=]
static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = {
^~~~~~~~~~~~~~~~~~
Remove the unused qib_7322_intr_msgs[]
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This comment was old, the MTU enums have been defined.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
sdma_event_names[] is only used within CONFIG_SDMA_VERBOSITY ifdefs, so
when CONFIG_SDMA_VERBOSITY is disabled, it results in the following
0-day build warning:
>> drivers/infiniband/hw/hfi1/sdma.c:137:27: warning: 'sdma_event_names'
>> defined but not used [-Wunused-const-variable=]
static const char * const sdma_event_names[] = {
^~~~~~~~~~~~~~~~
This occurs on the following compiler:
compiler: gcc-6 (Debian 6.1.1-1) 6.1.1 20160430
For more information check:
https://lists.01.org/pipermail/kbuild-all/2016-May/020060.html
Fix this warning by defining sdma_event_name[] only within the
CONFIG_SDMA_VERBOSITY ifdefs.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Use kzalloc_node instead of kzalloc for rdmavt memory region segment
allocation to optimize for performance on NUMA platforms.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The usage of the various vmalloc APIs do not consistently zero memory
when allocating the swqe. Insure zeroing variants are used.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Commit e88c9271d9f8 ("IB/hfi1: Fix buffer cache corner case which
may cause corruption") introduced a bug which may cause a reference
count of a interval RB node to be leaked in the case where an SDMA
transfer from that node completes at the same time as the node is
being extended.
If a node is being extended, it is first removed from the RB tree
in order to be processed without the risk of an invalidation event
removing the node at the same time.
If a SDMA completion happens during that time, the completion handler
will fail to find the node in the RB tree and, therefore, fail to
correctly decrement its refcount. This leaves the node in the tree and
its pages pinned for the duration of the user process.
To prevent this from happening the io vector adds a reference to the
RB node, which is used during the SDMA completion instead of looking
up the node in the RB tree.
This change adds a performance improvement as a side effect by avoiding
the RB tree lookup.
Fixes: e88c9271d9f8 ("IB/hfi1: Fix buffer cache corner case which may cause corruption")
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
blk_mq_init_queue() calls blk_mq_init_allocated_queue(), but q->mq_ops
was not cleared when blk_mq_init_allocated_queue() fails.
Then blk_cleanup_queue() calls blk_mq_free_queue() which will crash because:
- q->all_q_node is not added to all_q_list yet
- q->tag_set is NULL
- hctx was not setup yet or already freed
Fixed it by clearing q->mq_ops on error path.
Signed-off-by: Ming Lin <ming.l@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically
support enforcing that a IOMODE_RW segment will not allow READ I/O.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
reading is disabled
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
It appears the website for maxim-ic.com changed to
maximintegrated.com.
Signed-off-by: Glenn Dayton <glenn.dayton24@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
"apd" was intended here instead of "init".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
