summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-18ath9k_common: get rid of an unnecessary variableFelix Fietkau
There's no need to truncate curchan->hw_value to u8 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18drivers: net: Mark functions as static in debug.cRashika Kheria
This patch marks the function il_clear_traffic_stats() in debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/debug.c: drivers/net/wireless/iwlegacy/debug.c:35:1: warning: no previous prototype for ‘il_clear_traffic_stats’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18drivers: net: Mark functions as static in 4965-debug.cRashika Kheria
This patch marks the function il4965_ucode_rx_stats_read(), il4965_ucode_tx_stats_read() and il4965_ucode_general_stats_read() in 4965-debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/4965-debug.c: drivers/net/wireless/iwlegacy/4965-debug.c:59:1: warning: no previous prototype for ‘il4965_ucode_rx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/4965-debug.c:471:1: warning: no previous prototype for ‘il4965_ucode_tx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/4965-debug.c:637:1: warning: no previous prototype for ‘il4965_ucode_general_stats_read’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18drivers: net: Mark functions as static in 3945-debug.cRashika Kheria
This patch marks the function il3945_ucode_rx_stats_read(), il3945_ucode_tx_stats_read() and il3945_ucode_general_stats_read() in 3945-debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/3945-debug.c: drivers/net/wireless/iwlegacy/3945-debug.c:52:1: warning: no previous prototype for ‘il3945_ucode_rx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/3945-debug.c:317:1: warning: no previous prototype for ‘il3945_ucode_tx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/3945-debug.c:407:1: warning: no previous prototype for ‘il3945_ucode_general_stats_read’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: download per country tx power table to firmwareBing Zhao
When driver gets regulatory domain change notifications or before associates to an AP with Country IE, the txpwrlimit table stored in device tree for that country is downloaded to firmware. The txpwrlimit downloading will happen only at the first time when the alpha2 country code is changed. World regulatory domain "00" notification doesn't trigger the downloading. This behavior is same as domain_info command. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: download cal-data from device-tree to firmwareBing Zhao
Currently only conf file based cal-data downloading is supported. On embedded platforms a better place to store the cal-data is in device tree. Add cal-data downloading from device tree to firmware. Both methods can co-exist. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: remove cfg_data constructionBing Zhao
The cfg_data buffer will include the cfg_data structure header (action, type, data_len). This makes it work for all data types without extra parsing. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: send regulatory domain info to firmware only if alpha2 changedBing Zhao
On cfg80211 regulatory domain change, drivers gets alpha2 country code or "00" in driver's notification handler. In most cases, the pattern will be US, 00, US, 00, US, 00, US, ... There is no need to send domain info to firmware in case of "00" or with the same alpha2 country code. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: fix 5/10MHz channel width initialization on ar9003Lorenzo Bianconi
Move ath9k_hw_set_rfmode() after ath9k_hw_process_ini() in order to avoid AR_PHY_MODE register is overwritten with default values by ar9003_hw_process_ini() Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k_htc: reconfigure led_gpios after resumeOleksij Rempel
On suspend/resume, firmware will restart and gpios configuration will be reseted. Restore this configureation at least for LEDs Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: clarify struct brcmf_sdio_dev::func[0] referenceArend van Spriel
The struct brcmf_sdio_dev contains array of sdio functions that are used in the driver. However, during probe func[0] entry was assigned to the function 1 reference. This was corrected upon doing the actual I/O access. This patch makes it more clear by creating the func[0] entry properly and use it as is during I/O access. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove brcmf_sdio_disconnect() functionArend van Spriel
Instead of calling brcmf_sdio_disconnect() expose brcmf_sdio_remove() and call it directly. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: use consistent function names in dhd_sdio.cArend van Spriel
Functions in dhd_sdio.c that are called with struct brcmf_sdio instance are renamed consistently with brcmf_sdio_ prefix. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Combine protocol push hdr and bus txdata.Hante Meuleman
For the transmission of data a protocol push hdr is performed followed by a bus txdata call. For the new protocol msgbuf this is not workable. Since they are already "loosely" coupled for bcdc protocol they are combined. This means that txdata will go "through" the protocol layer and a seperate protocol push hdr will not be needed anymore. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Add definition of new protocol layer msgbuf.Hante Meuleman
A new protocol layer msgbuf will be added in the future. This change makes it possible to select the desired layer by the bus driver. USB and SDIO will select BCDC. At the moment nothing is being done with this information. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Fix hex dump for FWIL.Hante Meuleman
The debug function brcmf_dbg_hex_dump API got changed and the information string should preferably contain a \n at the end of the string. Update the FWIL so debug output looks better. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Move common BCDC code in single function.Hante Meuleman
The BCDC functions query_dcmd and set_dcmd both create a msgbuf to be sent to dongle this code is very similar and for optimisation best put in a function. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: reduce function parameters in sdio send/receive callsArend van Spriel
The SDIO send and receive functions in bcmsdh.c are always called with the same parameters. For the driver there is no use-case to call them otherwise so remove those parameters from function prototypes. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: use consistent function names in bcmsdh.cArend van Spriel
Functions in bcmsdh.c that are called with struct brcmf_sdio_dev instance are renamed consistently with brcmf_sdiod_ prefix. Also removing brcmf_sdioh_attach/detach() functions and merge it with brcmf_sdiod_probe/remove(). Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove brcmf_sdio_wdtimer_enable() functionArend van Spriel
Instead of using the brcmf_sdio_wdtimer_enable() function call brcmf_sdbrcm_wd_timer() directly. Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: get rid of some void pointer parametersArend van Spriel
In sdio code a couple of functions use a void pointer as argument type although it should be struct brcmf_sdio. Changing the functions to have proper type checking. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove regs parameter from sdio probe functionsArend van Spriel
The chip recognition requires a base address that was provided to it during the probe. However, the address is a fixed define value so it is unnecessary to pass through the probe functions. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove brcmf_sdio_regrw_helper() from header fileArend van Spriel
Make brcmf_sdio_regrw_helper() static removing its use outside of the bcmsdh.c source file. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: use sdio functions to enable/disable F2Arend van Spriel
Instead of catching CCCR_IOEx register in F0 write access to determine whether F2 state needs to change do it with direct call to sdio_[enable/disable]_func(). Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove unused struct brcmf_sdio_dev::func_cis_ptr attributeArend van Spriel
During the SDIO probe the func_cis_ptr attribute in struct brcmf_sdio_dev is being determined, but it is never used after that. Removing it also obsoletes two functions in bcmsdh.c. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove unnecessary function prototypesArend van Spriel
With the merge of bcmsdh.c and bcmsdh_mmc.c several function prototypes are no longer necessary and can be removed. Consequence is reordering some of the functions. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: combine bcmsdh source files into oneArend van Spriel
The driver has four files specific to SDIO host interface handling. This commit reduces that by merging two closely related source files. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: add missing curly braces in brcmf_fws_txstatus_suppressed()Arend van Spriel
The 0-day testing from Fenguang Wu issued the following warning: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 4b074b07625f603d40d4d04937f8874a00415dc4 commit: 1e86d69662d7d86360624f74bbe1b5fa1b8ffb13 [33/59] brcmfmac: Update fwsignal to fix out of order tx. >> drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1393:2-56: code aligned with following code on line 1394 vim +1393 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c 84bcc0c3 1387 } 84bcc0c3 1388 84bcc0c3 1389 entry->generation = genbit; 84bcc0c3 1390 2747e5f7 1391 ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb); 2747e5f7 1392 if (ret == 0) 1e86d696 @1393 brcmf_skb_htod_tag_set_field(skb, GENERATION, .. 1e86d696 @1394 brcmf_skbcb(skb)->htod_seq = seq; 1e86d696 1395 if (brcmf_skb_htod_seq_get_field(skb, FROMFW)) { 1e86d696 1396 brcmf_skb_htod_seq_set_field(skb, .. 1e86d696 1397 brcmf_skb_htod_seq_set_field(skb, .. This warning is valid and the if statement needs curly braces here. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18net: wirelesse: wcn36xx: pull allocation outside of critical sectionMichal Nazarewicz
Commit [3469adb3: fix potential NULL pointer dereference] introduced a check of msg_ind allocation, but omitted allocation of msg_ind->msg. Moreover, it introduced two if statements, which looked a bit clunky. This commit moves allocation code outside of the critical section so there's no need to dance around mutex_unlock, and adds the missing allocation check. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-12-18Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-12-18mac80211: make ieee80211_recalc_radar_chanctx staticJohannes Berg
The function is only used in one file, so move it up a bit to avoid forward declarations and make it static. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18mac80211: fix checkpatch errorsWeilong Chen
Fix a number of different checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-17iwlwifi: pcie: determine the interrupt type in the handlerEmmanuel Grumbach
Instead of having: iwl_pcie_irq_handler iwl_pcie_isr_ict iwl_pcie_isr_non_ict we now have: iwl_pcie_irq_handler: if (use_ict)) iwl_pcie_int_cause_ict; else iwl_pcie_int_cause_non_ict; This is much clearer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: pcie: read the interrupt cause from the handlerEmmanuel Grumbach
We now disable the interrupts in the hardware from the upper half and all the rest (including reading the interrupt cause) is done in the handler. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: pcie: move the ICT / non-ICT handling functionsEmmanuel Grumbach
The purpose of this is to be able to call these functions from the interrupt handler and not from the primary interrupt handler. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: pcie: re-organize the PCIe ISR codeEmmanuel Grumbach
Separate the code that simply disables interrupt in the hardware and the code that checks what interrupt fired. This will be useful to move the second part in the threaded handler which will be done in a future patch. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: pcie: track interrupt mask in SWEmmanuel Grumbach
Track the interrupt mask in software, making it exactly what is configured in the interrupt mask register in the hardware. This allows not to access the register from the interrupt handler. This was the case for ICT interrupt already, but not for non-ICT interrupt. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: pcie: clean up ICT allocation codeEmmanuel Grumbach
Since iwl_trans_pcie_alloc_ict is called in the PCIe allocation code, we always set CSR_INT_BIT_RX_PERIODIC. Move that bit to the default list of interrupts we enable and simplify the code. Also use dma_zalloc_ and avoid to memset the memory afterwards. trans_pcie->ict_index is 0 since trans_pcie has just been kzalloced, remove the redundant assignment. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: fix variable shadowingJohannes Berg
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: EyalX Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: fix RTS protection being set indefinitelyEyal Shapira
RTS protection was turned on once aggregation was enabled but it was never turned off. Remove turning on RTS protection in the LQ command completely as TX_CMD_FLG_PROT_REQUIRE gets set in iwl_mvm_set_tx_cmd for every Tx which is part of an aggregation. This would already cause RTS protection to be used during aggregations. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17ath9k: Fix interrupt handling for the AR9002 familySujith Manoharan
This patch adds a driver workaround for a HW issue. A race condition in the HW results in missing interrupts, which can be avoided by a read/write with the ISR register. All chips in the AR9002 series are affected by this bug - AR9003 and above do not have this problem. Cc: stable@vger.kernel.org Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-17rtlwifi: pci: Fix oops on driver unloadLarry Finger
On Fedora systems, unloading rtl8192ce causes an oops. This patch fixes the problem reported at https://bugzilla.redhat.com/show_bug.cgi?id=852761. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-17ath9k_htc: properly set MAC address and BSSID maskMathy Vanhoef
Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-17Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-12-17iwlwifi: mvm: set highest rate in VHT MCS SetEyal Shapira
Set the Tx/Rx highest long GI rates in the VHT Supported MCS Set field according to the chip capabilties. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: disable MCS9 Tx workaroundEyal Shapira
MCS9 introduces some corner cases in the current rs algorithm which may lead to non optimal throughput and instability in the throughput. Until all the corner cases are resolved disable MCS9 for Tx as a workaround which yields better throughput results as MCS8 is much more stable. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: Do not allow AP MAC context update if not activeIlan Peer
Fix a regression introduced in "iwlwifi: mvm: fix ht protection flags" where an AP/IBSS MAC context could have been updated even before the context was added to the FW. This fix avoids the following warning: WARNING: ... at .../drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c:1132 iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm]() Changing inactive MAC 0c:8b:fd:01:1a:30/3 Modules linked in: [...] Call Trace: [<c16041fd>] dump_stack+0x41/0x52 [<c1041074>] warn_slowpath_common+0x84/0xa0 [<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm] [<f80d8f45>] ? iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm] [<c1041133>] warn_slowpath_fmt+0x33/0x40 [<f80d8f45>] iwl_mvm_mac_ctxt_changed+0x75/0x90 [iwlmvm] [<f80d517a>] iwl_mvm_bss_info_changed+0x22a/0x4b0 [iwlmvm] [<c160831d>] ? mutex_unlock+0xd/0x10 [<f80d4678>] ? iwl_mvm_configure_filter+0x58/0x70 [iwlmvm] [<f80d4f50>] ? iwl_mvm_mac_tx+0xc0/0xc0 [iwlmvm] [<f8132d83>] ieee80211_bss_info_change_notify+0xa3/0x1d0 [mac80211] [<f8149247>] ? ieee80211_del_virtual_monitor+0x127/0x1f0 [mac80211] [<f8149cac>] ieee80211_do_open+0x12c/0xeb0 [mac80211] [<c106c6de>] ? __raw_notifier_call_chain+0x1e/0x30 [<c106c70f>] ? raw_notifier_call_chain+0x1f/0x30 [<f814aa8d>] ieee80211_open+0x5d/0x60 [mac80211] [<c1500c7b>] __dev_open+0xab/0x140 [<c160b39a>] ? _raw_spin_unlock_bh+0x2a/0x30 [<c1500f41>] __dev_change_flags+0x81/0x160 [<c10ab6fc>] ? __lock_is_held+0x3c/0x60 [<c15010d1>] dev_change_flags+0x21/0x60 Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reported-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: fixup MakefileEmmanuel Grumbach
debufs.o appeared twice in the Makefile. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: refactor rate scale action decisionEyal Shapira
Extract the scale action decision to a different function in preparation of modifying it. While at it also convert the scale action values from hardcoded values to a clear enum. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 15:58:17 +0000