| Age | Commit message (Collapse) | Author |
|---|
|
Commit f2ba1e5e2208 ("tools: ynl-gen: stop generating common notification handlers")
removed the last caller of the parse_cb_run() helper.
We no longer need to export ynl_cb_array.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All YNL parsing code expects a pointer to struct ynl_parse_arg AKA yarg.
For dump was pass in struct ynl_dump_state, which works fine, because
struct ynl_dump_state and struct ynl_parse_arg have identical layout
for the members that matter.. but it's a bit hacky.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
libc doesn't have an ARRAY_SIZE() create one locally.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create helpers for accessing payloads of struct nlmsg.
Use them instead of the libmnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create ynl_attr_for_each*() iteration helpers.
Use them instead of the mnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't use mnl attr helpers, we're trying to remove the libmnl
dependency. Create both signed and unsigned helpers, libmnl
had unsigned helpers, so code generator no longer needs
the mnl_type() hack.
The new helpers are written from first principles, but are
hopefully not too buggy.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The temporary auto-int helpers are not really correct.
We can't treat signed and unsigned ints the same when
determining whether we need full 8B. I realized this
before sending the patch to add support in libmnl.
Unfortunately, that patch has not been merged,
so time to fix our local helpers. Use the mnl* name
for now, subsequent patches will address that.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 7c59c9c8f202 ("tools: ynl: generate code for ovs families")
we need relatively recent OvS headers to get YNL to compile.
Add the direct include workaround to fix compilation on less
up-to-date OSes like CentOS 9.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240226225806.1301152-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andrew Lunn says:
====================
drivers: net: Convert EEE handling to use linkmode bitmaps
EEE has until recently been limited to lower speeds due to the use of
the legacy u32 for link speeds. This restriction has been lifted, with
the use of linkmode bitmaps, added in the following patches:
1f069de63602 ethtool: add linkmode bitmap support to struct ethtool_keee
1d756ff13da6 ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keee
285cc15cc555 ethtool: adjust struct ethtool_keee to kernel needs
0b3100bc8fa7 ethtool: switch back from ethtool_keee to ethtool_eee for ioctl
d80a52335374 ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side
This patchset converts the remaining MAC drivers still using the old
_u32 to link modes.
A couple of Intel drivers do odd things with EEE, setting the autoneg
bit. It is unclear why, no other driver does, ethtool does not display
it, and EEE is always negotiated. One patch in this series deletes
this code.
With all users of the legacy _u32 changed to link modes, the _u32
values are removed from keee, and support for them in the ethtool core
is removed.
---
Changes in v5:
- Restore zeroing eee_data.advertised in ax8817_178a
- Fix lp_advertised -> supported in ixgdb
- Link to v4: https://lore.kernel.org/r/20240218-keee-u32-cleanup-v4-0-71f13b7c3e60@lunn.ch
Changes in v4:
- Add missing conversion in igb
- Add missing conversion in r8152
- Add patch to remove now unused _u32 members
- Link to v3: https://lore.kernel.org/r/20240217-keee-u32-cleanup-v3-0-fcf6b62a0c7f@lunn.ch
Changes in v3:
- Add list of commits adding linkmodes to EEE to cover letter
- Fix grammar error in cover letter.
- Add Reviewed-by from Jacob Keller
- Link to v2: https://lore.kernel.org/r/20240214-keee-u32-cleanup-v2-0-4ac534b83d66@lunn.ch
Changes in v2:
- igb: Fix type 100BaseT to 1000BaseT.
- Link to v1: https://lore.kernel.org/r/20240204-keee-u32-cleanup-v1-0-fb6e08329d9a@lunn.ch
====================
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The input parameter 'level' in rawv6_get/seticmpfilter is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Justin Iurman says:
====================
ioam6: netlink multicast event
v5:
- remove the "must be the destination" check before sending an ioam6
event
v4:
- rebase on top of net merge
v3:
- patchset was mistakenly superseded due to same cover title used for
iproute2-next equivalent patch -> resend (renamed)
v2:
- fix warnings
Add generic netlink multicast event support to ioam6 as another solution
to share IOAM data with user space. The other one being via IPv6 raw
sockets combined with ancillary data (or packet socket, if the listener
does not need the processing of the IOAM Option-Type, since the hook is
before in that case). This patchset focuses on the IOAM Pre-allocated
Trace (the only Option-Type currently supported in the kernel), and so
on IOAM "trace" events. See an example of a consumer here [1].
[1] https://github.com/Advanced-Observability/ioam-agent-python/blob/netlink_event/ioam-agent.py
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we're processing an IOAM Pre-allocated Trace Option-Type (the only
one supported currently), then send the trace as an ioam6 event to the
netlink multicast group. This way, user space apps will be able to
collect IOAM data.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new api to support ioam6 events for generic netlink multicast. A
first "trace" event is added to the list of ioam6 events, which will
represent an IOAM Pre-allocated Trace Option-Type. It provides another
solution to share IOAM data with user space.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason Xing says:
====================
introduce drop reasons for tcp receive path
When I was debugging the reason about why the skb should be dropped in
syn cookie mode, I found out that this NOT_SPECIFIED reason is too
general. Thus I decided to refine it.
v10
Link: https://lore.kernel.org/netdev/20240223193321.6549-1-kuniyu@amazon.com/
1. fix three nit problems (Kuniyuki)
2. add reviewed-by tag (Kuniyuki)
v9
Link: https://lore.kernel.org/netdev/20240222113003.67558-1-kerneljasonxing@gmail.com/
1. nit: remove one unneeded 'else' (David)
2. add reviewed-by tags (Eric, David)
v8
Link: https://lore.kernel.org/netdev/20240221025732.68157-1-kerneljasonxing@gmail.com/
1. refine part of codes in patch [03/10] and patch [10/10] (Eric)
2. squash patch [11/11] in the last version into patch [10/11] (Eric)
3. add reviewed-by tags (Eric)
v7
Link: https://lore.kernel.org/all/20240219032838.91723-1-kerneljasonxing@gmail.com/
1. fix some misspelled problem (Kuniyuki)
2. remove redundant codes in tcp_v6_do_rcv() (Kuniyuki)
3. add reviewed-by tag in patch [02/11] (Kuniyuki)
v6
Link: https://lore.kernel.org/all/c987d2c79e4a4655166eb8eafef473384edb37fb.camel@redhat.com/
Link: https://lore.kernel.org/all/CAL+tcoAgSjwsmFnDh_Gs9ZgMi-y5awtVx+4VhJPNRADjo7LLSA@mail.gmail.com/
1. Take one case into consideration in tcp_v6_do_rcv(), behave like old
days, or else it will trigger errors (Paolo).
2. Extend NO_SOCKET reason to consider two more reasons for request
socket and child socket.
v5:
Link: https://lore.kernel.org/netdev/20240213134205.8705-1-kerneljasonxing@gmail.com/
Link: https://lore.kernel.org/netdev/20240213140508.10878-1-kerneljasonxing@gmail.com/
1. Use SKB_DROP_REASON_IP_OUTNOROUTES instead of introducing a new
one (Eric, David)
2. Reuse SKB_DROP_REASON_NOMEM to handle failure of request socket
allocation (Eric)
3. Reuse NO_SOCKET instead of introducing COOKIE_NOCHILD
4. avoid duplication of these opt_skb tests/actions (Eric)
5. Use new name (TCP_ABORT_ON_DATA) for readability (David)
6. Reuse IP_OUTNOROUTES instead of INVALID_DST (Eric)
---
HISTORY
This series is combined with 2 series sent before suggested by Jakub. So
I'm going to separately write changelogs for each of them.
PATCH 1/11 - 5/11
preivious Link: https://lore.kernel.org/netdev/20240213134205.8705-1-kerneljasonxing@gmail.com/
Summary
1. introduce all the dropreasons we need, [1/11] patch.
2. use new dropreasons in ipv4 cookie check, [2/11],[3/11] patch.
3. use new dropreasons ipv6 cookie check, [4/11],[5/11] patch.
v4:
Link: https://lore.kernel.org/netdev/20240212172302.3f95e454@kernel.org/
1. Fix misspelled name in Kdoc as suggested by Jakub.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/20240204104601.55760-1-kerneljasonxing@gmail.com/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
PATCH 6/11 - 11/11
previous Link: https://lore.kernel.org/netdev/20240213140508.10878-1-kerneljasonxing@gmail.com/
v4:
Link: https://lore.kernel.org/netdev/CANn89iJar+H3XkQ8HpsirH7b-_sbFe9NBUdAAO3pNJK3CKr_bg@mail.gmail.com/
Link: https://lore.kernel.org/netdev/20240213131205.4309-1-kerneljasonxing@gmail.com/
Already got rid of @acceptable in tcp_rcv_state_process(), so I need to
remove *TCP_CONNREQNOTACCEPTABLE related codes which I wrote in the v3
series.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/20240204104601.55760-1-kerneljasonxing@gmail.com/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's time to let it work right now. We've already prepared for this:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch does two things:
1) add two more new reasons
2) only change the return value(1) to various drop reason values
for the future use
For now, we still cannot trace those two reasons. We'll implement the full
function in the subsequent patch in this series.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Soon later patches can use these relatively more accurate
reasons to recognise and find out the cause.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like what I did to ipv4 mode, refine this part: adding more drop
reasons for better tracing.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like previous patch does, only moving skb drop logical code to
cookie_v6_check() for later refinement.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now it's time to use the prepared definitions to refine this part.
Four reasons used might enough for now, I think.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only move the skb drop from tcp_v4_do_rcv() to cookie_v4_check() itself,
no other changes made. It can help us refine the specific drop reasons
later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding one drop reason to detect the condition of skb dropped
because of hook points in cookie check and extending NO_SOCKET
to consider another two cases can be used later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.
Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:
"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."
sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;
If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.
Signed-off-by: Adam Li <adamli@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: support reset controller and update docs
The driver previously supported reset pins using GPIO, but it lacked
support for reset controllers. Although a reset method is generally not
required, the driver fails to detect the switch if the reset was kept
asserted by a previous driver.
This series adds support to reset a Realtek switch using a reset
controller. It also updates the binding documentation to remove the
requirement of a reset method and to add the new reset controller
property.
It was tested on a TL-WR1043ND v1 router (rtl8366rb via SMI).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
Changes in v5:
- Fixed error checking logic when reset controller (de)assert fails
- Link to v4: https://lore.kernel.org/r/20240219-realtek-reset-v4-0-858b82a29503@gmail.com
Changes in v4:
- do not test for priv->reset,priv->reset_ctl
- updated commit message
- Link to v3: https://lore.kernel.org/r/20240213-realtek-reset-v3-0-37837e574713@gmail.com
Changes in v3:
- Rebased on the Realtek DSA driver refactoring (08f627164126)
- Dropped the reset controller example in bindings
- Used %pe in error printing
- Linked to v2: https://lore.kernel.org/r/20231027190910.27044-1-luizluca@gmail.com/
Changes in v2:
- Introduced a dedicated commit for removing the reset-gpios requirement
- Placed binding patches before code changes
- Removed the 'reset-names' property
- Moved the example from the commit message to realtek.yaml
- Split the reset function into _assert/_deassert variants
- Modified reset functions to return a warning instead of a value
- Utilized devm_reset_control_get_optional to prevent failure when the
reset control is missing
- Used 'true' and 'false' for boolean values
- Removed the CONFIG_RESET_CONTROLLER check as stub methods are
sufficient when undefined
- Linked to v1: https://lore.kernel.org/r/20231024205805.19314-1-luizluca@gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for resetting the device using a reset controller,
complementing the existing GPIO reset functionality (reset-gpios).
Although the reset is optional and the driver performs a soft reset
during setup, if the initial reset pin state was asserted, the driver
will not detect the device until the reset is deasserted.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Realtek switches can use a reset controller instead of reset-gpios.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'reset-gpios' should not be mandatory. although they might be
required for some devices if the switch reset was left asserted by a
previous driver, such as the bootloader.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace macro MAC_ADDRESS_EQUAL() for null_mac_addr checking with inline
function__agg_has_partner(). When MAC_ADDRESS_EQUAL() is verifiying
aggregator's partner mac addr with null_mac_addr, means that seeing if
aggregator has a valid partner or not. Using __agg_has_partner() makes it
more clear to understand.
In ad_port_selection_logic(), since aggregator->partner_system and
port->partner_oper.system has been compared first as a prerequisite, it is
safe to replace the upcoming MAC_ADDRESS_EQUAL() for null_mac_addr checking
with __agg_has_partner().
Delete null_mac_addr, which is not required anymore in bond_3ad.c, since
all references to it are gone.
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/SI2PR04MB5097BCA8FF2A2F03D9A5A3EEDC5A2@SI2PR04MB5097.apcprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "port_prox" variable is a pointer to "struct port_proxy" and
this structure ends in a flexible array:
struct port_proxy {
[...]
struct t7xx_port ports[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
devm_kzalloc() function.
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240224181932.2720-1-erick.archer@gmx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The input parameter 'opt' in rawv6_err() is not used. Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224084121.2479603-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a followup of commit 234ec0b6034b ("netlink: fix potential
sleeping issue in mqueue_flush_file"), because vfree_atomic()
overhead is unfortunate for medium sized allocations.
1) If the allocation is smaller than PAGE_SIZE, do not bother
with vmalloc() at all. Some arches have 64KB PAGE_SIZE,
while NLMSG_GOODSIZE is smaller than 8KB.
2) Use kvmalloc(), which might allocate one high order page
instead of vmalloc if memory is not too fragmented.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20240224090630.605917-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration
block, but allocates it much later. As a result, the following crash
happens on my setup:
BUG: kernel NULL pointer dereference, address: 0000000000000090
fbcon: Taking over console
#PF: supervisor write access in kernel mode
#PF: error_code (0x0002) - not-present page
PGD 12f382067 P4D 0
Oops: 8002 [#1] PREEMPT SMP NOPTI
CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ #49
Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023
RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en]
Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74
RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000
RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540
FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? page_fault_oops+0x3a6/0x400
? exc_page_fault+0x7a/0x1b0
? asm_exc_page_fault+0x26/8x30
? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en]
? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en]
_bnxt_open_nic+0x198/0xa50 [bnxt_en]
? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en]
bnxt_open+0xeb/0x1b0 [bnxt_en]
_dev_open+0x12e/0x1f0
_dev_change_flags+0xb0/0x200
dev_change_flags+0x25/0x60
do_setlink+0x463/0x1260
? sock_def_readable+0x14/0xc0
? rtnl_getlink+0x4b9/0x590
? _nla_validate_parse+0x91/0xfa0
rtnl_newlink+0xbac/0xe40
<...>
Don't create a variable and dereference the first array member directly
since it's used only once in the code.
Fixes: ef4ee64e9990 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240226144911.1297336-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6151ff9c7521 ("selftests: netdevsim: use suitable existing dummy
file for flash test") introduced a nice trick to the devlink flashing
test. Instead of user having to create a file under /lib/firmware
we just pick the first one that already exists.
Sadly, in AWS Linux there are no files directly under /lib/firmware,
only in subdirectories. Don't limit the search to -maxdepth 1.
We can use the %P print format to get the correct path for files
inside subdirectories:
$ find /lib/firmware -type f -printf '%P\n' | head -1
intel-ucode/06-1a-05
The full path is /lib/firmware/intel-ucode/06-1a-05
This works in GNU find, busybox doesn't have printf at all,
so we're not making it worse.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224050658.930272-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The MMC IPC interrupt status and interrupt mask registers are
of little use as Ethernet statistics, but incrementing counters
based on the current interrupt and interrupt mask registers
makes them actively misleading.
For example, if the interrupt mask is set to 0x08420842,
the current code will increment by that amount each iteration,
leading to the following sequence of nonsense:
mmc_rx_ipc_intr_mask: 969816526
mmc_rx_ipc_intr_mask: 1108361744
These registers have been included in the Ethernet statistics
since the first version of MMC back in 2011 (commit 1c901a46d57).
That commit also mentions the MMC interrupts as
"something to add later (if actually useful)".
If the registers are actually useful, they should probably
be part of the Ethernet register dump instead of statistics,
but for now, drop the counters for mmc_rx_ipc_intr and
mmc_rx_ipc_intr_mask completely.
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223-stmmac_stats-v3-1-5d483c2a071a@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to do a clause 22 access to the PHY registers of the ADIN1110,
we have to write the MDIO frame to the ADIN1110_MDIOACC register, and
then poll the MDIO_TRDONE bit (for a 1) in the same register. The
device will set this bit to 1 once the internal MDIO transaction is
done. In practice, this bit takes ~50 - 60 us to be set.
The first attempt to poll the bit is right after the ADIN1110_MDIOACC
register is written, so it will always be read as 0. The next check will
only be done after 10 ms, which will result in the MDIO transactions
taking a long time to complete. Reduce this polling interval to 100 us.
Since this interval is short enough, switch the poll function to
readx_poll_timeout_atomic() instead.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240223162129.154114-1-ciprian.regus@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Alex Elder says:
====================
net: ipa: don't abort system suspend
Currently the IPA code aborts an in-progress system suspend if an
IPA interrupt arrives before the suspend completes. There is no
need to do that though, because the IPA driver handles a forced
suspend correctly, quiescing any hardware activity before finally
turning off clocks and interconnects.
This series drops the call to pm_wakeup_dev_event() if an IPA
SUSPEND interrupt arrives during system suspend. Doing this
makes the two remaining IPA power flags unnecessary, and allows
some additional code to be cleaned up--and best of all, removed.
The result is much simpler (and I'm really glad not to be using
these flags any more).
The first patch implements the main change. The second and
third remove the flags that were used to determine whether to
call pm_wakeup_dev_event(). The next two remove a function that
becomes a trivial wrapper, and the last one just avoids writing
a register unnecessarily.
Note that the first two patches will have checkpatch warnings,
because checkpatch disagrees with my compiler on what to do when
a block contains only a semicolon. I went with what the compiler
recommends.
clang says: warning: suggest braces around empty body
checkpatch: WARNING: braces {} are not necessary for single statement blocks
====================
Link: https://lore.kernel.org/r/20240223133930.582041-1-elder@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
