summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: disable softirqs for queued frame handlingJohannes Berg
As noticed by syzbot, calling ieee80211_handle_queued_frames() (and actually handling frames there) requires softirqs to be disabled, since we call into the RX code. Fix that in the case of cleaning up frames left over during shutdown. Fixes: 177c6ae9725d ("wifi: mac80211: handle tasklet frames before stopping") Reported-by: syzbot+1d516edf1e74469ba5d3@syzkaller.appspotmail.com Link: https://patch.msgid.link/20240626091559.cd6f08105a6e.I74778610a5ff2cf8680964698131099d2960352a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM valuesEric Dumazet
syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137 ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:450 [inline] NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314 mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650 process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:3429 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: cfg80211: Always call tracingIlan Peer
Call the tracing function even if the cfg80211 callbacks are not set. This would allow better understanding of user space actions. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://patch.msgid.link/20240614093541.018cb816e176.I28f68740a6b42144346f5c175c7874b0a669a364@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: check SSID in beaconJohannes Berg
Check that the SSID in beacons is correct, if it's not hidden and beacon protection is enabled (otherwise there's no value). If it doesn't match, disconnect. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143809.8b24a3d26a3d.I3e3ef31dbd2ec606be74d502a9d00dd9514c6885@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: correcty limit wider BW TDLS STAsJohannes Berg
When updating a channel context, the code can apply wider bandwidth TDLS STA channel definitions to each and every channel context used by the device, an approach that will surely lead to problems if there is ever more than one. Restrict the wider BW TDLS STA consideration to only TDLS STAs that are actually related to links using the channel context being updated. Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143707.1ad989acecde.I5c75c94d95c3f4ea84f8ff4253189f4b13bad5c3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: add ieee80211_tdls_sta_link_id()Johannes Berg
We've open-coded this twice and will need it again, add ieee80211_tdls_sta_link_id() to get the one link ID for a TDLS STA. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143707.9f8141ae1725.I343822bbba0ae08dedb2f54a0ce87f2ae5ebeb2b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: update STA/chandef width during switchJohannes Berg
In channel switch without an additional channel context, where the reassign logic kicks in, we also need to update the station bandwidth and chandef minimum width correctly to avoid having station rate control configured to wider bandwidth than the channel context. Do that now. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.0bc3d28231b3.I51e76df86212057ca0469e235ba9bf4461cbee75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: make ieee80211_chan_bw_change() able to use reservedJohannes Berg
Make ieee80211_chan_bw_change() able to use the reserved chanreq (really the chandef part of it) for the calculations, so it can be used _without_ applying the changes first. Remove the comment that indicates this is required, since it no longer is. However, this capability only gets used later. Also, this is not ideal, we really should not different so much between reserved and non-reserved usage, to simplify. That's a further cleanup later though. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.1a08cf83b8cb.Ie567bb272eb25ce487651088f13ad041f549651c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: optionally pass chandef to ieee80211_sta_cur_vht_bw()Johannes Berg
We'll need this as well for channel switching cases, so add the ability now to pass the chandef to calculate for. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.f70e05d9f306.Ifa0ce267de4f0ef3c21d063fb0cbf50e84d7d6ff@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: optionally pass chandef to ieee80211_sta_cap_rx_bw()Johannes Berg
We'll need this function to take a new chandef in (some) channel switching cases, so prepare for that by allowing that to be passed and using it if so. Clean up the code a little bit while at it. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143418.772313f08b6a.If9708249e5870671e745d4c2b02e03b25092bea3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: handle protected dual of public actionJohannes Berg
The code currently handles ECSA (extended channel switch announcement) public action frames. Handle also their protected dual, which actually is protected. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143037.db642feb8b2e.I184fa5c9bffb68099171701e403c2aa733f60fde@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: restrict public action ECSA frame handlingJohannes Berg
Public action extended channel switch announcement (ECSA) frames cannot be protected well, the spec is unclear about what should happen in the presence of stations that can receive protected dual and stations that cannot. Mitigate these issues by not treating public action frames as the absolute truth, only treat them as a hint to stop transmitting (quiet mode), and do the remainder of the CSA handling only when receiving the next beacon (or protected action frame) that contains the CSA; or, if it doesn't, simply stop being quiet and continue operating normally. This limits the exposure to malicious ECSA public action frames, since they cannot cause a disconnect now, only a short interruption in traffic. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143037.ec7ccc45903e.Ife17d55c7ecbf98060f9c52889f3c8ba48798970@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: refactor CSA queue block/unblockJohannes Berg
This code is duplicated many times, refactor it into new separate functions. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240612143037.1ad22f10392d.If21490c2c67aae28f3c54038363181ee920ce3d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.Dirk Su
HP EliteBook 645/665 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mic-mute/audio-mute working. Signed-off-by: Dirk Su <dirk.su@canonical.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240626021437.77039-1-dirk.su@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-26ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820Takashi Iwai
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry, and this eventually breaks the existing quirk for Lenovo Yoga Duet 7 13ITL6 equipped with the same PCI SSID 17aa:3820. For applying a proper quirk for each model, check the codec SSID additionally. Fortunately Yoga Duet has a different codec SSID, 0x17aa3802. (Interestingly, 17aa:3802 has another conflict of SSID between another Yoga model vs 14IRP8 which we had to work around similarly.) Fixes: b1fd0d1285b1 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM") Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-25Merge branch 'add-ethernet-driver-for-tehuti-networks-tn40xx-chips'Jakub Kicinski
FUJITA Tomonori says: ==================== add ethernet driver for Tehuti Networks TN40xx chips This patchset adds a new 10G ethernet driver for Tehuti Networks TN40xx chips. Note in mainline, there is a driver for Tehuti Networks (drivers/net/ethernet/tehuti/tehuti.[hc]), which supports TN30xx chips. Multiple vendors (DLink, Asus, Edimax, QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks went out of business but the drivers are still distributed under GPL2 with some of the hardware (and also available on some sites). With some changes, I try to upstream this driver with a new PHY driver in Rust. The major change is replacing the PHY abstraction layer in the original driver with phylink. TN40xx chips are used with various PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and MV88E2010). I've also been working on a new PHY driver for QT2025 in Rust [1]. For now, I enable only adapters using QT2025 PHY in the PCI ID table of this driver. I've tested this driver and the QT2025 PHY driver with Edimax EN-9320 10G adapter and 10G-SR SFP+. In mainline, there are PHY drivers for AQR105 and Marvell PHYs, which could work for some TN40xx adapters with this driver. To make reviewing easier, this patchset has only basic functions. Once merged, I'll submit features like ethtool support. v11: https://lore.kernel.org/netdev/20240618051608.95208-7-fujita.tomonori@gmail.com/ v10: https://lore.kernel.org/netdev/20240611045217.78529-7-fujita.tomonori@gmail.com/ v9: https://lore.kernel.org/netdev/20240605232608.65471-1-fujita.tomonori@gmail.com/ v8: https://lore.kernel.org/netdev/20240603064955.58327-1-fujita.tomonori@gmail.com/ v7: https://lore.kernel.org/netdev/20240527203928.38206-7-fujita.tomonori@gmail.com/ v6: https://lore.kernel.org/netdev/20240512085611.79747-2-fujita.tomonori@gmail.com/ v5: https://lore.kernel.org/netdev/20240508113947.68530-1-fujita.tomonori@gmail.com/ v4: https://lore.kernel.org/netdev/20240501230552.53185-1-fujita.tomonori@gmail.com/ v3: https://lore.kernel.org/netdev/20240429043827.44407-1-fujita.tomonori@gmail.com/ v2: https://lore.kernel.org/netdev/20240425010354.32605-1-fujita.tomonori@gmail.com/ v1: https://lore.kernel.org/netdev/20240415104352.4685-1-fujita.tomonori@gmail.com/ [1] https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/ ==================== Link: https://patch.msgid.link/20240623235507.108147-1-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: tn40xx: add phylink supportFUJITA Tomonori
This patch adds supports for multiple PHY hardware with phylink. The adapters with TN40xx chips use multiple PHY hardware; AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120, 88X3310, and MV88E2010. For now, the PCI ID table of this driver enables adapters using only QT2025 PHY. I've tested this driver and the QT2025 PHY driver (SFP+ 10G SR) with Edimax EN-9320 10G adapter. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Hans-Frieder Vogt <hfdevel@gmx.net> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20240623235507.108147-8-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: tn40xx: add mdio bus supportFUJITA Tomonori
This patch adds supports for mdio bus. A later path adds PHYLIB support on the top of this. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20240623235507.108147-7-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: tn40xx: add basic Rx handlingFUJITA Tomonori
This patch adds basic Rx handling. The Rx logic uses three major data structures; two ring buffers with NIC and one database. One ring buffer is used to send information to NIC about memory to be stored packets to be received. The other is used to get information from NIC about received packets. The database is used to keep the information about DMA mapping. After a packet arrived, the db is used to pass the packet to the network stack. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Hans-Frieder Vogt <hfdevel@gmx.net> Link: https://patch.msgid.link/20240623235507.108147-6-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: tn40xx: add basic Tx handlingFUJITA Tomonori
This patch adds device specific structures to initialize the hardware with basic Tx handling. The original driver loads the embedded firmware in the header file. This driver is implemented to use the firmware APIs. The Tx logic uses three major data structures; two ring buffers with NIC and one database. One ring buffer is used to send information about packets to be sent for NIC. The other is used to get information from NIC about packet that are sent. The database is used to keep the information about DMA mapping. After a packet is sent, the db is used to free the resource used for the packet. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20240623235507.108147-5-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: tn40xx: add register definesFUJITA Tomonori
This adds several defines to handle registers in Tehuti Networks TN40xx chips for later patches. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Hans-Frieder Vogt <hfdevel@gmx.net> Link: https://patch.msgid.link/20240623235507.108147-4-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: tn40xx: add pci driver for Tehuti Networks TN40xx chipsFUJITA Tomonori
This just adds the scaffolding for an ethernet driver for Tehuti Networks TN40xx chips. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240623235507.108147-3-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25PCI: Add Edimax Vendor ID to pci_ids.hFUJITA Tomonori
Add the Edimax Vendor ID (0x1432) for an ethernet driver for Tehuti Networks TN40xx chips. This ID can be used for Realtek 8180 and Ralink rt28xx wireless drivers. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20240623235507.108147-2-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25dt-bindings: net: dsa: mediatek,mt7530: Minor wording fixesChris Packham
Update the mt7530 binding with some minor updates that make the document easier to read. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20240624211858.1990601-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25Merge branch 'gve-add-flow-steering-support'Jakub Kicinski
Ziwei Xiao says: ==================== gve: Add flow steering support To support flow steering in GVE driver, there are two adminq changes need to be made in advance. The first one is adding adminq mutex lock, which is to allow the incoming flow steering operations to be able to temporarily drop the rtnl_lock to reduce the latency for registering flow rules among several NICs at the same time. This could be achieved by the future changes to reduce the drivers' dependencies on the rtnl lock for particular ethtool ops. The second one is to add the extended adminq command so that we can support larger adminq command such as configure_flow_rule command. In that patch, there is a new added function called gve_adminq_execute_extended_cmd with the attribute of __maybe_unused. That attribute will be removed in the third patch of this series where it will use the previously unused function. And the other three patches are needed for the actual flow steering feature support in driver. ==================== Link: https://patch.msgid.link/20240625001232.1476315-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25gve: Add flow steering ethtool supportJeroen de Borst
Implement the ethtool commands that can be used to configure and query flow-steering rules. A large part of this change consists of translating the ethtool representation of 'ntuples' to our internal gve_flow_rule and vice-versa in the new created gve_flow_rule.c Considering the possible large amount of flow rules, the driver doesn't store all the rules locally. When the user runs 'ethtool -n <nic>' to check the registered rules, the driver will send adminq command to query a limited amount of rules/rule ids(that filled in a 4096 bytes dma memory) at a time as a cache for the ethtool queries. The adminq query commands will be repeated for several times until the ethtool has queried all the needed rules. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Co-developed-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240625001232.1476315-6-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25gve: Add flow steering adminq commandsJeroen de Borst
Add new adminq commands for the driver to configure and query flow rules that are stored in the device. Flow steering rules are assigned with a location that determines the relative order of the rules. Flow rules can run up to an order of millions. In such cases, storing a full copy of the rules in the driver to prepare for the ethtool query is infeasible while querying them from the device is better. That needs to be optimized too so that we don't send a lot of adminq commands. The solution here is to store a limited number of rules/rule ids in the driver in a cache. Use dma_pool to allocate 4k bytes which lets device write at most 46 flow rules(4096/88) or 1024 rule ids(4096/4) at a time. For configuring flow rules, there are 3 sub-commands: - ADD which adds a rule at the location supplied - DEL which deletes the rule at the location supplied - RESET which clears all currently active rules in the device For querying flow rules, there are also 3 sub-commands: - QUERY_RULES corresponds to ETHTOOL_GRXCLSRULE. It fills the rules in the allocated cache after querying the device - QUERY_RULES_IDS corresponds to ETHTOOL_GRXCLSRLALL. It fills the rule_ids in the allocated cache after querying the device - QUERY_RULES_STATS corresponds to ETHTOOL_GRXCLSRLCNT. It queries the device's current flow rule number and the supported max flow rule limit Signed-off-by: Jeroen de Borst <jeroendb@google.com> Co-developed-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240625001232.1476315-5-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25gve: Add flow steering device optionJeroen de Borst
Add a new device option to signal to the driver that the device supports flow steering. This device option also carries the maximum number of flow steering rules that the device can store. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Co-developed-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240625001232.1476315-4-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25gve: Add adminq extended commandJeroen de Borst
The adminq command is limited to 64 bytes per entry and it's 56 bytes for the command itself at maximum. To support larger commands, we need to dma_alloc a separate memory to put the command in that memory and send the dma memory address instead of the actual command. Introduce an extended adminq command to wrap the real command with the inner opcode and the allocated dma memory address specified. Once the device receives it, it can get the real command from the given dma memory address. As designed with the device, all the extended commands will use inner opcode larger than 0xFF. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Co-developed-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240625001232.1476315-3-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25gve: Add adminq mutex lockZiwei Xiao
We were depending on the rtnl_lock to make sure there is only one adminq command running at a time. But some commands may take too long to hold the rtnl_lock, such as the upcoming flow steering operations. For such situations, it can temporarily drop the rtnl_lock, and replace it for these operations with a new adminq lock, which can ensure the adminq command execution to be thread-safe. Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240625001232.1476315-2-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFONeal Cardwell
Testing determined that the recent commit 9e046bb111f1 ("tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()") has a race, and does not always ensure retrans_stamp is 0 after a TFO payload retransmit. If transmit completion for the SYN+data skb happens after the client TCP stack receives the SYNACK (which sometimes happens), then retrans_stamp can erroneously remain non-zero for the lifetime of the connection, causing a premature ETIMEDOUT later. Testing and tracing showed that the buggy scenario is the following somewhat tricky sequence: + Client attempts a TFO handshake. tcp_send_syn_data() sends SYN + TFO cookie + data in a single packet in the syn_data skb. It hands the syn_data skb to tcp_transmit_skb(), which makes a clone. Crucially, it then reuses the same original (non-clone) syn_data skb, transforming it by advancing the seq by one byte and removing the FIN bit, and enques the resulting payload-only skb in the sk->tcp_rtx_queue. + Client sets retrans_stamp to the start time of the three-way handshake. + Cookie mismatches or server has TFO disabled, and server only ACKs SYN. + tcp_ack() sees SYN is acked, tcp_clean_rtx_queue() clears retrans_stamp. + Since the client SYN was acked but not the payload, the TFO failure code path in tcp_rcv_fastopen_synack() tries to retransmit the payload skb. However, in some cases the transmit completion for the clone of the syn_data (which had SYN + TFO cookie + data) hasn't happened. In those cases, skb_still_in_host_queue() returns true for the retransmitted TFO payload, because the clone of the syn_data skb has not had its tx completetion. + Because skb_still_in_host_queue() finds skb_fclone_busy() is true, it sets the TSQ_THROTTLED bit and the retransmit does not happen in the tcp_rcv_fastopen_synack() call chain. + The tcp_rcv_fastopen_synack() code next implicitly assumes the retransmit process is finished, and sets retrans_stamp to 0 to clear it, but this is later overwritten (see below). + Later, upon tx completion, tcp_tsq_write() calls tcp_xmit_retransmit_queue(), which puts the retransmit in flight and sets retrans_stamp to a non-zero value. + The client receives an ACK for the retransmitted TFO payload data. + Since we're in CA_Open and there are no dupacks/SACKs/DSACKs/ECN to make tcp_ack_is_dubious() true and make us call tcp_fastretrans_alert() and reach a code path that clears retrans_stamp, retrans_stamp stays nonzero. + Later, if there is a TLP, RTO, RTO sequence, then the connection will suffer an early ETIMEDOUT due to the erroneously ancient retrans_stamp. The fix: this commit refactors the code to have tcp_rcv_fastopen_synack() retransmit by reusing the relevant parts of tcp_simple_retransmit() that enter CA_Loss (without changing cwnd) and call tcp_xmit_retransmit_queue(). We have tcp_simple_retransmit() and tcp_rcv_fastopen_synack() share code in this way because in both cases we get a packet indicating non-congestion loss (MTU reduction or TFO failure) and thus in both cases we want to retransmit as many packets as cwnd allows, without reducing cwnd. And given that retransmits will set retrans_stamp to a non-zero value (and may do so in a later calling context due to TSQ), we also want to enter CA_Loss so that we track when all retransmitted packets are ACked and clear retrans_stamp when that happens (to ensure later recurring RTOs are using the correct retrans_stamp and don't declare ETIMEDOUT prematurely). Fixes: 9e046bb111f1 ("tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()") Fixes: a7abf3cd76e1 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Link: https://patch.msgid.link/20240624144323.2371403-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25Merge branch 'ethtool-provide-the-dim-profile-fine-tuning-channel'Jakub Kicinski
Heng Qi says: ==================== ethtool: provide the dim profile fine-tuning channel The NetDIM library provides excellent acceleration for many modern network cards. However, the default profiles of DIM limits its maximum capabilities for different NICs, so providing a way which the NIC can be custom configured is necessary. Currently, the way is based on the commonly used "ethtool -C". For example, on the server side, the virtio-net NIC with rx dim enabled has 8 queues and runs nginx. The client uses the following command to send traffic to the server: ./wrk http://server_ip:80 -c 64 -t 5 -d 30 Then adjust the default rx-profile for server dim to {.usec = 1, .pkts = 256, .comps = n/a,}, {.usec = 8, .pkts = 256, .comps = n/a,}, {.usec = 30, .pkts = 256, .comps = n/a,}, {.usec = 64, .pkts = 256, .comps = n/a,}, {.usec = 128, .pkts = 256, .comps = n/a,} The server PPS is improved by 20%+. ==================== Link: https://patch.msgid.link/20240621101353.107425-1-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25virtio-net: support dim profile fine-tuningHeng Qi
Virtio-net has different types of back-end device implementations. In order to effectively optimize the dim library's gains for different device implementations, let's use the new interface params to initialize and query dim results from a customized profile list. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240621101353.107425-6-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25dim: add new interfaces for initialization and getting resultsHeng Qi
DIM-related mode and work have been collected in one same place, so new interfaces are added to provide convenience. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240621101353.107425-5-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25ethtool: provide customized dim profile managementHeng Qi
The NetDIM library, currently leveraged by an array of NICs, delivers excellent acceleration benefits. Nevertheless, NICs vary significantly in their dim profile list prerequisites. Specifically, virtio-net backends may present diverse sw or hw device implementation, making a one-size-fits-all parameter list impractical. On Alibaba Cloud, the virtio DPU's performance under the default DIM profile falls short of expectations, partly due to a mismatch in parameter configuration. I also noticed that ice/idpf/ena and other NICs have customized profilelist or placed some restrictions on dim capabilities. Motivated by this, I tried adding new params for "ethtool -C" that provides a per-device control to modify and access a device's interrupt parameters. Usage ======== The target NIC is named ethx. Assume that ethx only declares support for rx profile setting (with DIM_PROFILE_RX flag set in profile_flags) and supports modification of usec and pkt fields. 1. Query the currently customized list of the device $ ethtool -c ethx ... rx-profile: {.usec = 1, .pkts = 256, .comps = n/a,}, {.usec = 8, .pkts = 256, .comps = n/a,}, {.usec = 64, .pkts = 256, .comps = n/a,}, {.usec = 128, .pkts = 256, .comps = n/a,}, {.usec = 256, .pkts = 256, .comps = n/a,} tx-profile: n/a 2. Tune $ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n "n" means do not modify this field. $ ethtool -c ethx ... rx-profile: {.usec = 1, .pkts = 1, .comps = n/a,}, {.usec = 2, .pkts = 256, .comps = n/a,}, {.usec = 3, .pkts = 3, .comps = n/a,}, {.usec = 4, .pkts = 4, .comps = n/a,}, {.usec = 256, .pkts = 5, .comps = n/a,} tx-profile: n/a 3. Hint If the device does not support some type of customized dim profiles, the corresponding "n/a" will display. If the "n/a" field is being modified, -EOPNOTSUPP will be reported. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25dim: make DIMLIB dependent on NETHeng Qi
DIMLIB's capabilities are supplied by the dim, net_dim, and rdma_dim objects, and dim's interfaces solely act as a base for net_dim and rdma_dim and are not explicitly used anywhere else. rdma_dim is utilized by the infiniband driver, while net_dim is for network devices, excluding the soc/fsl driver. In this patch, net_dim relies on some NET's interfaces, thus DIMLIB needs to explicitly depend on the NET Kconfig. The soc/fsl driver uses the functions provided by net_dim, so it also needs to depend on NET. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240621101353.107425-3-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25linux/dim: move useful macros to .h fileHeng Qi
Useful macros will be used effectively elsewhere. These will be utilized in subsequent patches. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240621101353.107425-2-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25Merge branch 'ravb-add-mii-support-for-r-car-v4m'Jakub Kicinski
Geert Uytterhoeven says: ==================== ravb: Add MII support for R-Car V4M All EtherAVB instances on R-Car Gen3/Gen4 SoCs support the RGMII interface. In addition, the first two EtherAVB instances on R-Car V4M also support the MII interface, but this is not yet supported by the driver. This patch series adds support for MII on R-Car Gen4, after the customary cleanup. The corresponding pin control support is available in [1]. Compile-tested only, as all AVB interfaces on the Gray Hawk Single development board are connected to RGMII PHYs. No regressions on R-Car V4H. [1] "[PATCH/RFC] pinctrl: renesas: r8a779h0: Add AVB MII pins and groups" https://lore.kernel.org/4a0a12227f2145ef53b18bc08f45b19dcd745fc6.1718378739.git.geert+renesas@glider.be/ v1: https://lore.kernel.org/f0ef3e00aec461beb33869ab69ccb44a23d78f51.1718378166.git.geert+renesas@glider.be ==================== Link: https://patch.msgid.link/cover.1719234830.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25ravb: Add MII support for R-Car V4MGeert Uytterhoeven
All EtherAVB instances on R-Car Gen3/Gen4 SoCs support the RGMII interface. In addition, the first two EtherAVB instances on R-Car V4M also support the MII interface, but this is not yet supported by the driver. Add support for MII on R-Car Gen4 by adding an R-Car Gen4-specific EMAC initialization function that selects the MII clock instead of the RGMII clock when the PHY interface is MII. Note that all implementations of EtherAVB on R-Car Gen4 SoCs have the APSR register, but only MII-capable instances are documented to have the MIISELECT bit, which has a documented value of zero when reserved. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/3a21d1d6680864aa85afff9260234c2b8054020a.1719234830.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25ravb: Improve ravb_hw_info instance orderGeert Uytterhoeven
Move ravb_gen2_hw_info before ravb_gen3_hw_info to match ravb_match_table[] order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/a76febe3737e26365a784e9193da9363f22aa550.1719234830.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25ionic: use dev_consume_skb_any outside of napiShannon Nelson
If we're not in a NAPI softirq context, we need to be careful about how we call napi_consume_skb(), specifically we need to call it with budget==0 to signal to it that we're not in a safe context. This was found while running some configuration stress testing of traffic and a change queue config loop running, and this curious note popped out: [ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545 [ 4371.402897] caller is napi_skb_cache_put+0x16/0x80 [ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8 [ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021 [ 4371.403460] Call Trace: [ 4371.403613] <TASK> [ 4371.403758] dump_stack_lvl+0x4f/0x70 [ 4371.403904] check_preemption_disabled+0xc1/0xe0 [ 4371.404051] napi_skb_cache_put+0x16/0x80 [ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic] [ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic] [ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic] [ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic] [ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic] [ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic] [ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic] [ 4371.405265] ethnl_set_rings+0x1f1/0x300 [ 4371.405418] ethnl_default_set_doit+0xbb/0x160 [ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130 [...] I found that ionic_tx_clean() calls napi_consume_skb() which calls napi_skb_cache_put(), but before that last call is the note /* Zero budget indicate non-NAPI context called us, like netpoll */ and DEBUG_NET_WARN_ON_ONCE(!in_softirq()); Those are pretty big hints that we're doing it wrong. We can pass a context hint down through the calls to let ionic_tx_clean() know what we're doing so it can call napi_consume_skb() correctly. Fixes: 386e69865311 ("ionic: Make use napi_consume_skb") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240624175015.4520-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25virtio_net: Remove u64_stats_update_begin()/end() for stats fetchLi RongQing
This place is fetching the stats, u64_stats_update_begin()/end() should not be used, and the fetcher of stats is in the same context as the updater of the stats, so don't need any protection Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Link: https://lore.kernel.org/20240621094552.53469-1-lirongqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26netfilter: nf_tables: rise cap on SELinux secmark contextPablo Neira Ayuso
secmark context is artificially limited 256 bytes, rise it to 4Kbytes. Fixes: fb961945457f ("netfilter: nf_tables: add SECMARK support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-26netfilter: cttimeout: remove 'l3num' attr checkLin Ma
After commit dd2934a95701 ("netfilter: conntrack: remove l3->l4 mapping information"), the attribute of type `CTA_TIMEOUT_L3PROTO` is not used any more in function cttimeout_default_set. However, the previous commit ea9cf2a55a7b ("netfilter: cttimeout: remove set but not used variable 'l3num'") forgot to remove the attribute present check when removing the related variable. This commit removes that check to ensure consistency. Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-26netfilter: nf_conncount: fix wrong variable typeYunjian Wang
Now there is a issue is that code checks reports a warning: implicit narrowing conversion from type 'unsigned int' to small type 'u8' (the 'keylen' variable). Fix it by removing the 'keylen' variable. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-26ipvs: Avoid unnecessary calls to skb_is_gso_sctpIsmael Luceno
In the context of the SCTP SNAT/DNAT handler, these calls can only return true. Fixes: e10d3ba4d434 ("ipvs: Fix checksumming on GSO of SCTP packets") Signed-off-by: Ismael Luceno <iluceno@suse.de> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-25netfilter: nf_tables: do not store nft_ctx in transaction objectsFlorian Westphal
nft_ctx is huge and most of the information stored within isn't used at all. Remove nft_ctx member from the base transaction structure and store only what is needed. After this change, relevant struct sizes are: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. A further reduction by 8 bytes would even allow for kmalloc-64. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-25netfilter: nf_tables: pass nft_table to destroy functionFlorian Westphal
No functional change intended. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-06-25netfilter: nf_tables: reduce trans->ctx.chain referencesFlorian Westphal
These objects are the trans_chain subtype, so use the helper instead of referencing trans->ctx, which will be removed soon. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:48:18 +0000